wiring accessories - electrika...sollysta wiring accessories sollysta offers a complete range of...

WiringAccessories

Sollysta Decorative Raised Plate Options

Sollysta Decorative Brushed Steel

Sollysta IP66 Sockets

Sollysta IP66 Switches

Sollysta Decorative Polished Brass

Sollysta White Moulded

Sollysta For Specific Equipment

SollystaPart M

SollystaGrid

Sollysta Decorative Black Nickel

Sollysta Metalclad Grey

Sollysta Decorative Polished Steel

Sollysta Metalclad White

Sollysta Decorative Flat Plate Options

Sollysta Wiring AccessoriesSollysta offers a complete range of wiring solutions for any application with our White Moulded, Decorative, Grid, IP66 and Metaclad ranges.

Specifically designed to inspire confidence, the modern design combines stylish aesthetics and quality without compromising on functionality, reliability or safety.

All of the hallmark features run consistently throughout the range, including the unique neutral loop terminal on the switch and the patented three pin shutter mechanism on the sockets for additional safety. Moulded cable lead-ins, captive and backed off terminal screws, wire end stops and in-line terminals have all been designed to ease installation, saving time on site.

L N L N L N

LOOP LOOP LOOP

Sollysta Neutral Loop Terminal

For many years domestic lighting circuits have been connected using the three plate method where the loop terminal is at the ceiling rose.

Today, it is increasingly likely that there is a decorative light fitting or even downlighters fitted in place of a standard pendant. These fittings are rarely provided with a neutral loop terminal.

It has also become popular to make the loop connection at the switch. This has the advantage of the connections being accessible and at a more convenient working height.

However, this leaves the problem of terminating the neutral conductor.

One solution is to connect the neutral to a connector block inside the wall box, which takes up extra space.

Our solution is the Sollysta light switch which has a unique neutral loop terminal, built in.

As can be seen from the diagram the neutrals are looped through the switches with a single line and neutral to each light fitting.

Socket outlets have apertures for plug pins and therefore will have a shutter mechanism that prevents access to live parts unless the earth pin is also present and has been inserted first. This however can be either intentionally or inadvertently defeated by inserting something into the earth pin aperture.

Sollysta sockets have a unique patented shutter system that not only requires the earth pin to be inserted first, but the simultaneous insertion of the live and neutral pins as well, before the shutter mechanism is activated.

This enhances safety by making it difficult to defeat the mechanism and therefore reducing the risk of electric shock.

UniqueSafety Shutters

One of the fundamental requirements of the BS 7671 Wiring Regulations is to provide basic protection against electric shock.

01 Terminals

The terminals all face in the same direction, removing the need to rotate the product during installation.

SollystaWiring AccessoriesIn addition to the aesthetics for the home owner and specifier, Sollysta has been designed to make the installation easier for the installer. Terminals designed to face in the same direction with lead-ins for wiring, backed out screws held captive to prevent loss, wire end stops and clear identification all help make the wiring and cabling much easier, helping to save time on site.

02 Terminal Screws

Terminal screws are supplied in the backed out position to save installation time and are also held captive within the moulding so they won’t be lost.

03 Lead-ins

Moulded lead-ins help to guide the driver blade to the screw head.

04 Wire End Stops

A positive wire end stop provides added security of connection.

05 Projection

The range has been designed to offer the shallowest projection possible in the back box, maximising space for cabling.

Maintenance FreeJunction BoxThe Maintenance Free Junction Box provides a secure and maintenance free means of connecting fixed wiring in any indoor application, whether it be under floor applications, between ground and first floor in houses, or where the jointing of cables is used to aid rewiring.

BS 7671 (Wiring Regulations) recognises equipment complying with an appropriate British Standard without further qualification. Therefore, a junction box marked is identified as a maintenance free accessory, which does not require further inspection, testing or maintenance after installation in a circuit.

The terminals accept and secure solid, stranded or flexible conductors from 0.5mm² to 4mm². Twin and CPC and flexible cords can all be mixed. You then secure the cage clamp terminal using a screwdriver or finger to push down on the push button.

The Maintenance Free junction box is ideal for use in residential and commercial buildings, refurbishments and re-wires, power and lighting circuits and circuits wired in sheathed cables.

The Maintenance Free junction box is unrivalled in today’s market. No other junction box provides as many features that allow contractors to comply with the latest wiring regulations.

Screwless TerminationsTests on these terminals include long-term vibration, shock test, long term connection test, pull out, voltage drop, temperature rise and exposure to corrosive atmospheres

Cable clampsCable clamps prevent strain on terminations and prevent exposed unsheathed conductors.

BreakoutThe simple breakouts on the base and lid allow you to select your cable entry points.

01 02 03

DownlighterJunction Box

Recognising that junction boxes are used to supply the connection between fixed wiring and downlighters, we developed a junction box that will help contractors meet the needs of the regulations.

The J501 is torpedo shaped to fit through a 58mm diameter hole in the ceiling. All the cables are securely clamped and they exit from either end of the junction box. This is in contrast to other junction boxes where the cables are generally not clamped and often exit at different angles, making it hard to push or pull them through the hole without risking damage or loosening the connections.

A loose or disconnected cable is a hidden danger with junction boxes. With an increasing drive for safety, such products have come under close inspection.

Wiring is fast and simple. The J501 fits comfortably in the hand and the cables can be clamped for easier connection. Cabling space is maximised with all the terminals arranged on one side and the upper wall on the lid hinges open 360º for unrestricted access.

For wiring, the three plate terminal style in the box is logical and easy to use and separate terminals for flexible cords and twin and CPC cables help prevent damage to smaller flexible conductors.

During installation all the cables are securely clamped, so there is no strain placed on the terminal connections and no risk of exposed unsheathed conductors. The cable clamps can be reversed to allow either single or double cable entry, which allows up to four flat and one flexible cable to be terminated.

Safety Pendants & Lampholders

01 Lampholder & Skirt02 Ceiling Rose Cover03 Terminal Safety Cover04 Terminal Plate

Our philosophy is to provide all of our pendants and lampholders with a safety J-slot mechanism which automatically disconnects power at the contacts when the lamp is removed.

This prevents electric shock due to accidental touching of the contacts when changing or installing lamps.

Safety Terminal Cover clips onto Terminal Plate enclosing live parts.

This applies to Page

Safety Bayonet Cap Cord Grip Lampholders 56

Safety Straight Batten Lampholders 56

Safety Access Batten Lampholders 56

Safety Pendant Sets with Access Ceiling Rose 56

01

0203

04

Additional safety can be achieved with our terminal cover which provides protection against accidental contact with electrical connections.

Safety is ensured with the clipable cover which shrouds all electrical connections whilst allowing removal of the ceiling rose cover for decorating or maintenance.

Safety Pendant & Batten Lampholder with Terminal Safety Cover

Safety Lampholders Complete with Safety Covers

Pendant Set 6” with Safety Cover 56

Batten Lampholder with Safety Cover 56x

12

WiringAccessoriesOur expansive range of Sollysta Wiring Accesories have been designed from the beginning to be installer friendly, tactile & safe.

Connect cables and install lamps securely with our Ceiling Accessories and Junction Boxes.

13

05 Page

Sollysta

White Moulded 14

Decorative 28

Metalclad 46

IP66 52

Junction Boxes

Maintenance Free Junction Boxes 54

Downlighter Junction Boxes 54

Traditional Junction Boxes 54

Ceiling Accessories

Safety Lampholders 56

Safety Pendants 56

Technical Pages 58

Data is subject to errors and technical modifications.14

White MouldedWall Switches, Intermediate Switches, Push Switches

Wall Switches

Intermediate Switches

Push Switches

Characteristics: - Unique patented loop terminal allows neutral looping at the switch. - Complies with BS EN 60669-1, a.c only. - ‘X‘ rated - No need to derate for fluorescent loads. - Clear terminal markings: 1-way L1, 2-way L2 - Capacity of each terminal - 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - For multigang switches use of a 25mm mounting box will provide increased wiring space. - Supplied with M3.5 x 20mm long fixing screws.

Characteristics: - Complies with BS EN 60669-1, a.c only. - ‘X‘ rated - No need to derate for fluorescent loads. - Clear terminal markings. - Capacity of each terminal - 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - For multigang switches use of a 25mm mounting box will provide increased wiring space. - Supplied with M3.5 x 20mm long fixing screws.

Characteristics: - Unique patented loop terminal allows neutral looping at the switch. - Complies with BS EN 60669-1, a.c only. - ‘X‘ rated - No need to derate for fluorescent loads. - Clear terminal markings: 1-way L1, 2-way L2 - Capacity of each terminal - 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - For multigang switches use of a 25mm mounting box will provide increased wiring space. - Supplied with M3.5 x 20mm long fixing screws.

Description Cat ref.

10AX Wall Switches

1 Gang 1 Way WMPS11

1 Gang 1 Way Printed 'Fan' WMPS11/FAN

1 Gang 2 Way WMPS12

2 Gang 2 Way WMPS22

3 Gang 2 Way WMPS32

4 Gang 2 Way WMPS42

6 Gang 2 Way WMPS62

1 Gang 2 Way Wide Rocker WMPS12W

2 Gang 2 Way Wide Rocker WMPS22W


Intermediate Switch WMPS16


Push Switches

Retractive Switch WMPS12R

With Bell Symbol WMPS12RB

With Wide Rocker WMPS12RW

WMPS11

WMPS12W

WMPS16

Data is subject to errors and technical modifications. 15

White MouldedDimmers, Isolator Switches

Push Button Dimmer Switches

Rotary Push Button Dimmer Switches

Isolator Switches

Characteristics: - Stylish flush button with quick press for on/off. - Hold button down to dim or brighten light level. - Leading edge. - Soft start feature prolongs lamp life. - Suitable for dimming mains and dimmable transformer extra low voltage lamps. - Complies with BS EN 60669-2-1 (including BS EN 55015). - Automatic switch off in event of transformer instability, protects the dimmer and the transformer. - Supplied with M3.5 x 30mm long fixing screws.

Characteristics: - Quick press for on/off with rotary dimming control. - 1 or 2 way switching. - Supplied with M3.5 x 30mm long fixing screws. - Suitable for mains halogen lamps without the need for derating. - Not suitable for fluorescent, LED or inductive loads. - Complies with BS EN 60669-2-1 (excluding clause 26 EMC requirements).

Characteristics: - Complies with BS EN 60669-2-4 - Rated conditional short circuit current (Inc) 1500A tested with Hager MTN110 6kA B curve MCB. - Capacity of each terminal 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - Supplied with M3.5 x 20mm long fixing screws.


Push Button Dimmer Switches

1 Gang 400W WMDS1

2 Gang 250W WMDS2

3 Gang 250W WMDS3

4 Gang 250W WMDS4

Resistive Load for LED Applications WMRESLOAD


Rotary Push Button Dimmer Switches

1 Gang 400W WMDR1/400R

2 Gang 250W WMDR2/250R


3 Pole Isolator Switches

Isolator Switch WMPS3PI

Isolator Switch with Fan Symbol WMPS3PIF

WMDS1

WMDR1/400R

WMPS3PIF


White MouldedSocket Outlets, Cooker Control Units, Outlet Plates

Switched & Unswitched Socket Outlets

Outlet Plates

Cooker Control Unit

Characteristics: - Unique patented three part safety shutter. - Complies with BS 1363-2, a.c only. - Double pole switching mechanism on switched sockets. - Twin socket comes with twin earth as standard. - All terminal screws grouped in-line and upward facing for ease of installation. - Clear printed and engraved terminal markings. - Capacity of each terminal: 3 x 4mm2 conductors switched & unswitched (for other sized conductors see terminal capacities on page 59).

- WMSS82USB(S) - Warning: To avoid possible damage to the product or spurious insulation readings, please disconnect the product before carrying out insulation resistance testing.

- WMSS82USB(S) USB output: 5V d.c. 2.4A total max. - For mounting boxes see selection chart on page 58. - Supplied with M3.5 x 30mm long fixing screws.

Characteristics: - Complies with BS 5733 - Terminal capacity: 20A 2 x 6.0mm ², 45A 2 x 10.0mm² conductors - 20A plate features 2 separate terminals for each of Line, Neutral and Earth so flexible and fixed wiring do not occupy the same terminal.

- Single screw fast fix cable clamp. - Supplied with M3.5 x 30mm long fixing screws. - 45A features large open brass terminals for ease of installation. - Protective red washer must be used under cable clamp to prevent damage to cable.

Characteristics: - Complies with BS 4177. - Switch and socket are double pole. - Twin earth as standard. - Main switch is suitable for isolation. - All terminals are upward facing for ease of installation. - Clearly printed terminal marking. - Capacity of terminals: 2 x 6.0mm2, 1 x 16.0mm 2. - For mounting boxes see selection chart on page 58. - Supplied with M3.5 x 30mm long fixing screws.


Switched Socket Outlets

13A 1 Gang Double Pole WMSS81

13A 2 Gang Double Pole Dual Earth WMSS82

13A 2 Gang Double Pole Dual Earth & Two USB Ports WMSS82USB

13A 2 Gang Double Pole Dual Earth & Two USB Ports & 10mm Spacer WMSS82USBS

10mm Spacer for 2 Gang Sockets WMUSBS

13A 2 Gang Double Pole Dual Earth Outboard Rockers WMSS82O

13A 1 Gang Double Pole with LED Indicator WMSS81N

13A 2 Gang Double Pole Dual Earth with LED Indicator WMSS82N

13A 2 Gang Double Pole Dual Earth Outboard Rockers & LED Indicator WMSS82ON

15A 1 Gang WMSS115

Unswitched Socket Outlets

13A 1 Gang WMS81

13A 2 Gang Dual Earth WMS82

5A 1 Gang WMS51


Outlet Plates

20A Flex Outlet Plate WMP2FO

45A Cooker Cable Outlet with Terminals WMP50FO


45A Cooker Control Unit WMCC50

45A Cooker Control Unit with LED Indicator WMCC50N

WMSS82

WMS51

WMSS82USB

WMP2FO

WMCC50

WMCC50N


White MouldedFused Connection Units

Switched & Unswitched Fused Connection Units (13A)

Characteristics: - Complies with BS 1363-4. - Single screw fast fix cable clamp, accommodates up to 1.5mm² flexible cord. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal 2 x 6.0mm2 conductors. - Supplied with M3.5 x 30mm long fixing screws. - For mounting boxes see selection chart on page 58. - We also offer a bespoke printing service for your individual requirements. Please contact our Estimation Team on 01952 675594 for further details.


13A Switched Fused Connection Units

FCU WMSSU83

FCU With Flex Outlet WMSSU83FO

FCU With LED Indicator WMSSU83N

FCU With LED Indicator & Flex Outlet WMSSU83FON

FCU With 3A Fuse WMSSU83/3A

13A Unswitched Fused Connection Units

FCU WMSU83

With Flex Outlet WMSU83FO

13A Unswitched Fused Connection Units - Printed Text

Printed - ‘Plinth Heater’ WMSU83PH

Printed - ‘Storage Heater’ WMSU83SH

Printed - ‘Towel Rail’ WMSU83TR

13A Switched Fused Connection Units - Printed Text

Printed 'Boiler' WMSSU83/BO

Printed 'Central Heating' WMSSU83/CTLHTG

Printed 'Dishwasher' WMSSU83/DW

Printed 'Extract Fan' WMSSU83/EF

Printed 'Fan' WMSSU83/FAN

Printed 'Fridge Freezer' WMSSU83/FF

Printed 'Freezer' WMSSU83/FRE

Printed 'Fridge' WMSSU83/FRI

Printed 'Heating' WMSSU83/HTG

Printed 'Heater' WMSSU83/HTR

Printed 'Shower Pump' WMSSU83/SHWRPUMP

Printed 'Socket Below' WMSSU83/SKTBELOW

Printed 'Tumble Dryer' WMSSU83/TD

Printed 'Washing Machine' WMSSU83/WM

13A Switched Fused Connection Units with Flex Outlet - Printed Text

Printed 'Boiler' WMSSU83FO/BO

Printed 'Dishwasher' WMSSU83FO/DW

Printed 'Extractor Fan' WMSSU83FO/EF

Printed 'Fridge Freezer' WMSSU83FO/FF

Printed 'Freezer' WMSSU83FO/FRE

Printed 'Fridge' WMSSU83FO/FRI

Printed 'Heating' WMSSU83FO/HTG

Printed 'Heater' WMSSU83FO/HTR

Printed 'Tumble Dryer' WMSSU83FO/TD

Printed 'Washing Machine' WMSSU83FO/WM

WMSSU83

WMSSU83N

Continued overleaf


White MouldedFused connection Units, Double Pole Switches


13A Switched Fused Connection Units with LED Indicator - Printed Text

Printed 'Boiler' WMSSU83N/BO

Printed 'Dishwasher' WMSSU83N/DW

Printed 'Extractor Fan' WMSSU83N/EF

Printed 'Fan' WMSSU83N/FAN

Printed 'Freezer' WMSSU83N/FRE

Printed 'Fridge' WMSSU83N/FRI

Printed 'Hob' WMSSU83N/HB

Printed 'Heating' WMSSU83N/HTG

Printed 'Tumble Dryer' WMSSU83N/TD

Printed 'Washing Machine' WMSSU83N/WM

13A Switched Fused Connection Units with LED Indicator & Flex Outlet - Printed Text

Printed 'Boiler' WMSSU83FON/BO

Printed 'Dishwasher' WMSSU83FON/DW

Printed 'Extractor Fan' WMSSU83FON/EF

Printed 'Fan' WMSSU83FON/FAN

Printed 'Freezer' WMSSU83FON/FRE

Printed 'Fridge' WMSSU83FON/FRI

Printed 'Hob' WMSSU83FON/HB

Printed 'Heating' WMSSU83FON/HTG

Printed 'Tumbledryer' WMSSU83FON/TD

Printed 'Washing Machine' WMSSU83FON/WM


20A Double Pole Switches

20A Double Pole Switch WMDP84

With Flex Outlet WMDP84FO

With LED Indicator WMDP84N

With LED Indicator & Flex Outlet WMDP84FON

20A Double Pole Switched - Printed Text

Printed 'Dishwasher' WMDP84DW

Printed 'Freezer' WMDP84/FRE

Printed 'Fridge' WMDP84/FRI

Printed 'Tumble Dryer' WMDP84/TD

Printed 'Washing Machine' WMDP84/WM

20A Double Pole Switches with Flex Outlet - Printed Text

Printed 'Freezer' WMDP84FO/FRE

Printed 'Fridge' WMDP84FO/FRI

Printed 'Tumble Dryer' WMDP84FO/TD

Printed 'Washing Machine' WMDP84FO/WM

Unswitched & Switched Fused Connection Units (13A) - Continued

Double Pole Switches (20A)

Characteristics: - Complies with BS EN 60669-1, a.c. only. - Single screw fast fix cable clamp, accommodates up to 1.5mm² flexible cord. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal 2 x 6.0mm² conductors. - For mounting boxes see selection chart on page 58. - Supplied with M3.5 x 30mm long fixing screws. - We also offer a bespoke printing service for your individual requirements. Please contact our Estimation Team on 01952 675594 for further details.

WMDP84FON


White MouldedDouble Pole Switches


50A Double Pole Switches

With LED Indicator (1 Gang) WMDP50N

Vertical with LED Indicator (2 Gang) WMDP50VN

50A Double Pole Switches with LED Indicator - Printed Text

Printed 'Cooker' WMDP50N/CK

Printed 'Hob' WMDP50N/HB

Printed 'Oven' WMDP50N/OV

Printed 'Shower' WMDP50N/SH

50A Double Pole Vertical Switches with LED Indicator - Printed Text

Printed 'Cooker' (2 Gang) WMDP50VN/CK

Printed 'Hob' (2 Gang) WMDP50VN/HB

Printed 'Oven' (2 Gang) WMDP50VN/OV

Double Pole Switches (50A)

Double Pole Switches (20A) (Continued)

Characteristics: - Complies with BS EN 60669-2-4. - Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B curve MCB. - All terminal screws upward facing for ease of installation. - Clearly printed terminal marking. - Capacity of each terminal: 2 x 6mm2, 1 x 10mm2. - For mounting boxes see selection chart on page 58. - Supplied with M3.5 x 30mm long fixing screws. - We also offer a bespoke printing service for your individual requirements. Please contact our Estimation Team on 01952 675594 for further details.

WMDP50N

20A Double Pole Switches with LED Indicator & Flex Outlet - Printed Text

Printed 'Dishwasher' WMDP84FON/DW

Printed 'Fan' WMDP84FON/FAN

Printed 'Freezer' WMDP84FON/FRE

Printed 'Fridge' WMDP84FON/FRI

Printed 'Tumble Dryer' WMDP84FON/TD

Printed 'Washing Machine' WMDP84FON/WM

Printed 'Waterheater' WMDP85FON

20A Double Pole Switches with LED Indicator - Printed Text

Printed 'Dishwasher' WMDP84N/DW

Printed 'Fan' WMDP84N/FAN

Printed 'Freezer' WMDP84N/FRE

Printed 'Fridge' WMDP84N/FRI

Printed 'Tumble Dryer' WMDP84N/TD

Printed 'Washing Machine' WMDP84N/WM

Printed 'Waterheater' WMDP85N

WMDP85N


White MouldedShaver Socket, Telephone & Data, TV & Satellite, Hotel Card Switch


Shaver Socket 115/230 Volt WMSO100


Telephone & Data

BT Master Telephone Outlet WMBTM

BT Secondary Telephone Outlet WMBTS

RJ11 Socket WMRJ11

RJ45 Socket WMRJ45

IDC Tools (bag of 10) IDCTOOL

Shaver Socket

Telephone & Data

Characteristics: - Complies with BS EN 61558-2-5. - Capacity of each terminal 2 x 2.5mm2 conductors. - Designed for use in bathrooms and shower rooms and incorporates a double wound transformer for an earth free supply. - Designed to supply electric shavers rated 50 VA or less. - Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets. Rating 20VA on either voltage. - Primary circuit protected by a self resetting thermal overload device. - Insertion of shaver plug automatically switches on the transformer. - Supplied with M3.5 x 30mm long fixing screws.

Characteristics: - BT sockets comply with BS 6312-2. - Supplied with fitted cable tie. - Quick connection with insulation displacement terminals. - Clearly printed terminal marking. - Supplied with M3.5 x 20mm long fixing screws.

WMSO100

WMBTM


TV & Satellite

Single F Type Satellite Outlet Screened WMSAT

Single Co-Ax TV Socket Outlet Male WMTVM

Single Co-Ax TV Socket Outlet Female WMTVF

Double TV & FM/DAB Co-Ax Socket Outlet WMDX

Triplexer TV, FM/DAB & Satellite Outlet WMTX

Quadplexer TV, FM/DAB, Satellite 1 & Satellite 2 Outlet WMQX

TV & Satellite

Characteristics: - TV outlets comply with BS 3041. - Satellite outlets comply with BS EN 50083-2. - Fully screened. - DAB compatible. - Supplied with M3.5 x 20mm fixing screws.

WMQX


White MouldedEuro Plates, Euro Modules


Euro Style Accomodation Plates

1 Module WMP1EU

2 Modules WMP2EU

4 Modules WMP4EU

Euro Style Accommodation Plates

Characteristics: - Carrier plates facilitate installation of industry standard modules. - Easy to configure for all applications. - Robust retention of modules in operation. - Quick release of modules for maintenance.

WMP2EU

Description Mod Width Cat ref. (White) Cat ref. (Black)

Euro Style Modules

BT Telephone Master 1 WMMBTM WMMBTMB

BT Telephone Secondary 1 WMMBTS WMMBTSB

RJ11 - Modem 1 WMMRJ11 WMMRJ11B

RJ45 - Cat 6 UTP 1 WMMRJ45 WMMRJ45B

Phono Plugs - Red/Black - Gold Plated 1 WMMPP -

Speaker Terminal Posts - Gold Plated 1 WMMSP -

Single IEC Female Non Isolated 1 WMMTVF WMMTVFB

Single IEC Male Non Isolated 1 WMMTVM WMMTVMB

Single Satellite F Connector 1 WMMSAT WMMSATB

Single Blank 1 WMMB WMMBB

PIR Occupancy Sensor 5m 1 WMMPIR05X -

PIR Occupancy Sensor 10m 1 WMMPIR10X -

HDMI 2 WMMHDMI WMMHDMIB

USB with Twin USB 2 WMMUSB WMMUSBB

Diplexer - TV & FM Radio 2 WMMDX WMMDXB

Triplexer - TV, Satellite & FM Radio 2 WMMTX WMMTXB

Quadplexer - TV, Satellite, FM Radio & Return 2 WMMQX WMMQXB

Euro Style Modules

Characteristics: - Please note: these euro modules are industry standard units and are not colour matched to Sollysta plates.

WMMBTM WMMSAT

WMMQXB


White MouldedCeiling Switches


6A Ceiling Switch

1 Way WMCS11

2 Way WMCS12


50A 2 Pole Isolating with LED Indicator WMCS50N


10A 3 Pole Ceiling Switch

Printed with Fan Symbol & 'Isolator' WMCS3PIF

Printed 'Isolator' WMCS3PI

Printed with Fan Symbol WMCS3PF

Light Switches

Shower Switches

Accessories for Ceiling Switches

Fan Isolator Switches

Characteristics: - Complies with BS EN 60669-1. - ‘X‘ rated - no need to de-rate for fluorescent loads. - Earth terminal in base. - Switch will operate at up to an angle of 45º. - Pull cords 1.5m long. - Capacity of each terminal: 2 x 1.5mm² conductors.

Characteristics: - Complies with BS EN 60669-2-4. - Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B Curve MCB. - Suitable for use with showers up to 11.5kW. - Position of the contacts shown by flag indicator. - Supplied with M3.5 x 30mm fixing screws. - Capacity of each terminal: 1 x 16mm² conductors.

Characteristics: - Complies with BS EN 60669-2-4. - Terminal capacity: 3 x 1.5mm². - Supplied with M3.5 x 30mm long fixing screws.

WMCS11

WMCS50N

WMCS3PIF


Single Spare Pull Cord PULLCORD



Grid Plates

1 Gang WMGP1

2 Gang WMGP2

3 Gang WMGP3

4 Gang WMGP4

6 (2 x 3) Gang WMGP6

8 (2 x 4) Gang Grid Plate WMGP8

1 Gang Grid Plate Grey WMGP1G




6 (2 x 3) Gang Grid Plate Grey WMGP6G

8 (2 x 4) Gang Grid Plate Grey WMGP8G


1 Gang WMGF1

2 Gang WMGF2

3/4 Gang WMGF34

Grid Plates

Grid Frames

WMGP2

WMGF34

White MouldedGrid Plates, Grid Switches

Description Cat ref. White Insert Cat ref. Black Insert

Grid Switches

Blank Module WMGB1 -

20AX 2 Way Single Pole Switch WMGS12 -

20A Intermediate Switch WMGS16 -

20A 2 Way Retractive Switch WMGS22R -

20A 1 Way Double Pole Switch WMGSDP2 -

20A 1 Way Double Pole Switch with LED Indicator WMGSDP2N -

20A Double Pole Key Switch WMGKS WMGKSB

20A Double Pole Key Switch Printed ‘Emergency Lighting Test’ WMGKS/EL -

13A Fuse Carrier WMGFU13 -

Dimmer Slave Switch WMGSD1S WMGSD1SB

Dimmer Switch Leading Edge WMGSD1L WMGSD1LB

Dimmer Switch Trailing Edge WMGSD1T WMGSD1TB

Red Indicator WMINDRED WMINDREDB

2 Way & Centre Off Latching Switch WMGS13L WMGS13LB

2 Way & Centre Off Latching Switch Red Rocker WMGS13LR -

2 Way & Centre Off Retractive Switch WMGS13R WMGS13RB

2 Way & Centre Off Retractive Switch Red Rocker WMGS13RR -

13A Fused Connection Unit Unswitched with LED Indicator WMGSU83N -

Grid Switches

Characteristics: - Complies with BS EN 606691-1 switches, BS 5733 fuse carrier. - Shallowest switch modules which clip in from the front for ease of installation and maintenance. - Terminal screw can be accessed with modules clipped into frames. - Frames locate to finished wall level. - Frames clip together to ease alignment for 6 gang and 8 gang applications. - We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on 01952 675612 for further details.

WMINDRED

WMGKS

WMGB1


White MouldedGrid Switches


20A 1 Way Double Pole Grid Switches - Printed

Printed 'Cooker Hood' WMGSDP2/CHD WMGSDP2B/CHD

Printed 'Dishwasher' WMGSDP2/DW WMGSDP2B/DW

Printed 'Extract Fan' WMGSDP2/EF WMGSDP2B/EF

Printed 'Fridge Freezer' WMGSDP2/FF WMGSDP2B/FF

Printed 'Freezer' WMGSDP2/FRE WMGSDP2B/FRE

Printed 'Fridge' WMGSDP2/FRI WMGSDP2B/FRI

Printed 'Hob' WMGSDP2/HB WMGSDP2B/HB

Printed 'Heating' WMGSDP2/HTG WMGSDP2B/HTG

Printed 'Microwave' WMGSDP2/MW WMGSDP2B/MW

Printed 'Micro Wave' WMGSDP2/MW2 WMGSDP2B/MW2

Printed 'Tumble Dryer' WMGSDP2/TD WMGSDP2B/TD

Printed 'Waste Disposal' WMGSDP2/WD WMGSDP2B/WD

Printed 'Washing Machine' WMGSDP2/WM WMGSDP2B/WM

Printed 'Oven' WMGSDP2/OV WMGSDP2B/OV

Printed 'Wine Cooler' WMGSDP2/WC WMGSDP2B/WC

Printed 'Hot Water' WMGSDP2/HW WMGSDP2B/HW

Printed 'Coffee Maker' WMGSDP2/CM WMGSDP2B/CM

Printed 'Hot Drawer' WMGSDP2/HD WMGSDP2B/HD

Printed 'Fan Boost' WMGSDP2/FB WMGSDP2B/FB

Printed 'Outside Socket' WMGSDP2/OS WMGSDP2B/OS

Printed 'Steam Oven' WMGSDP2/SOV

Printed 'Boiler' WMGSDP2/BOI -

Printed 'Outside Light' WMGSDP2/OL -

Printed 'Plinth Heater' WMGSDP2/PH -

20A 1 Way Double Pole Grid Switches with LED Indicator - Printed

Printed 'Cooker Hood' WMGSDP2N/CHD WMGSDP2NB/CHD

Printed 'Dishwasher' WMGSDP2N/DW WMGSDP2NB/DW

Printed 'Extract Fan' WMGSDP2N/EF WMGSDP2NB/EF

Printed 'Fridge Freezer' WMGSDP2N/FF WMGSDP2NB/FF

Printed 'Freezer' WMGSDP2N/FRE WMGSDP2NB/FRE

Printed 'Fridge' WMGSDP2N/FRI WMGSDP2NB/FRI

Printed 'Hob' WMGSDP2N/HB WMGSDP2NB/HB

Printed 'Heating' WMGSDP2N/HTG WMGSDP2NB/HTG

Printed 'Microwave' WMGSDP2N/MW WMGSDP2NB/MW

Printed 'Tumble Dryer' WMGSDP2N/TD WMGSDP2NB/TD

Printed 'Waste Disposal' WMGSDP2N/WD WMGSDP2NB/WD

Printed 'Washing Machine' WMGSDP2N/WM WMGSDP2NB/WM

Printed 'Oven' WMGSDP2N/OV WMGSDP2NB/OV

Printed 'Outside Socket' WMGSDP2N/OS -

Printed 'Outside Light' WMGSDP2N/OL -

Printed 'Plinth Heater' WMGSDP2N/PH -

Grid Switches (Continued)


WMGSDP2/CHD

WMGSDP2/EF


White MouldedPatress Boxes, Accessories


Single Spare Pull Cord PULLCORD

Pack of 100 Push Fit Screw Covers SCREWCOVER

IDC Tools (bag of 10) IDCTOOL

Accessories

PULLCORD


Single 20mm Deep Moulded Box WMPB1/20



Twin 28mm Deep Moulded Box WMPB2/28

Twin 46mm Deep Moulded Box with Cable Clamps WMPB2/46CC

46mm Deep Moulded Shaver Box WMPB2/46

20mm Single to Twin Converter Frame WMPB2/20

Single 14mm Deep Spacer for Base Flex Outlet WMPB1/BFO

Pattress Boxes

Characteristics: - Complies with BS EN 60670-1. - Depth quoted is internal depth. - Colour and footprint match all Sollysta White Moulded wiring accessories.

WMPB2/20

Description Quantity Cat ref.

Key Tag Switch with Key Card (time delay 60s) 5 XH9001

Hotel Key Card Switch

Blank Plates

XH9001

WMP1

WMP2

Characteristics: - Includes indicator light to aid locating which is switched off when the card is inserted. - Complies with BS EN 60669-1. - Supplied with M3.5 x 25mm long fixing screws.

Single Blank Plate WMP1

Twin Blank Plate WMP2


Part MWiring Accessories

WMSS82OG

WMPS12WG

DescriptionCat ref.(Grey Faceplate)

Wall Switches

10AX 1 Gang 2 Way Wide Rocker WMPS12WG

10AX 2 Gang 2 Way Wide Rocker WMPS22WG

Intermediate Switch

Wide Rocker WMPS16WG

Push Switches

Wide Rocker WMPS12RWG

Wide Rocker Printed ‘Fan Boost’ WMPS12RWG/FB

Double Pole Switched Socket Outlets

13A 1 Gang WMSS81G

13A 2 Gang with Outboard Rockers WMSS82OG

Switched Fused Connection Units

13A with LED Indicator WMSSU83NG

13A with LED Indicator Printed 'Extract Hood' WMSSU83NG/EH

13A with LED Indicator Printed 'Panel Heater' WMSSU83NG/PH

Double Pole Switches

20A 1 Gang with LED Indicator WMDP84NG

50A 2 Gang with LED Indicator WMDP50NG

50A 2 Gang with LED Indicator Printed ‘Cooker’ WMDP50NG/CK

Grid Plates

1 Gang Grid Plate WMGP1G




6 Gang Grid Plate (2 x 3) WMGP6G

8 Gang Grid Plate (2 x 4) WMGP8G

Euro Style Accommodation Plates

1 Module WMP1EUG

2 Modules WMP2EUG

4 Modules WMP4EUG

Part M Wiring Accessories

Characteristics: - Designed to satisfy Buildings Regulations Approved Document M (referred to as Part M) - All products comply with their relevant British Standards - Switches have wide rockers and dark face plates for clear visibility and ease of actuation - Sockets have outboard rockers to ensure correct switching of appliances and dark face plates for ease of identification of switch position

- Grid modules can be found on page 5.12. Euro modules can be found on page 5.10.


Specific Application Equipment Socket Outlets, Fused Connection Units

WMSS82ORR

WMSS82R/CS

WMSSU83RR

Description

Cat ref. (White Faceplate, Red Rocker)

Cat ref. (Red Faceplate, Red Rocker)

Double Pole Switched Socket Outlets

13A 1 Gang WMSS81R WMSS81RR

13A 2 Gang WMSS82R WMSS82RR

13A 2 Gang with Outboard Rockers WMSS82OR WMSS82ORR

13A 2 Gang Switched Socket Printed 'Cleaners Socket' WMSS82R/CS -13A 2 Gang Switched Socket Printed 'Emergency Supply' WMSS82R/ES -13A 2 Gang Switched Socket Printed 'Do Not Switch Off' WMSS82R/DNS -13A 2 Gang Switched Socket Printed 'UPS Protected' WMSS82R/UPS -

Switched Fused Connection Units

13A Fused Connection Unit Switched WMSSU83R -

13A Fused Connection Unit Red Face (White Fuse Cover) WMSU83R -

13A Fused Connection Unit Switched - WMSSU83RR

Specific Equipment Wiring Accessories

Characteristics: - Red rockers aid ease of identification for safe switching of specific equipment - Red face plates ensure products are easy to locate - A range of printed options is available for specific functions



Raised Plate 10AX 1 Gang 2 Way

Polished Steel WRPS12PSW WRPS12PSB

Brushed Steel WRPS12BSW WRPS12BSB

Polished Brass WRPS12PBW WRPS12PBB

Black Nickel - WRPS12BNB
















Raised Plate 10AX 1 Gang 2 Way Wide Rocker

Polished Steel WRPS12WPSW WRPS12WPSB

Brushed Steel WRPS12WBSW WRPS12WBSB

Polished Brass WRPS12WPBW WRPS12WPBB

Black Nickel - WRPS12WBNB

Raised Plate 10AX 2 Gang 2 Way Wide Rocker

Polished Steel WRPS22WPSW WRPS22WPSB

Brushed Steel WRPS22WBSW WRPS22WBSB

Polished Brass WRPS22WPBW WRPS22WPBB

Black Nickel - WRPS22WBNB

Raised Plate Intermediate Switch





Wall Switches Raised Plate

Characteristics: - Unique patented LOOP terminal to allow neutral looping at the switch. - Complies with BS EN 60669-1, a.c only. - ‘X’ rated - No need to de-rate for fluorescent loads. - Capacity of each terminal 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - For multi-gang switches, use of a 25mm mounting box will provide increased wiring space. - Supplied with M3.5 x 20mm long fixing screws.

WRPS12BNB

WRPS12PBW

WRPS12BSB

WRPS12PSB

DecorativeWall Switches


DecorativeWall Switches


Flat Plate 10AX 1 Gang 2 Way

Polished Steel WFPS12PSW WFPS12PSB

Brushed Steel WFPS12BSW WFPS12BSB

Polished Brass WFPS12PBW WFPS12PBB

Black Nickel - WFPS12BNB
















Flat Plate 10AX 1 Gang 2 Way Wide Rocker

Polished Steel WFPS12WPSW WFPS12WPSB

Brushed Steel WFPS12WBSW WFPS12WBSB

Polished Brass WFPS12WPBW WFPS12WPBB

Black Nickel - WFPS12WBNB

Flat Plate 10AX 2 Gang 2 Way Wide Rocker

Polished Steel WFPS22WPSW WFPS22WPSB

Brushed Steel WFPS22WBSW WFPS22WBSB

Polished Brass WFPS22WPBW WFPS22WPBB

Black Nickel - WFPS22WBNB

Flat Plate Intermediate Switch





Wall Switches Flat Plate

Characteristics: - Unique patented LOOP terminal to allow neutral looping at the switch. - Complies with BS EN 60669-1, a.c only. - ‘X’ rated - No need to de-rate for fluorescent loads. - Capacity of each terminal 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - For multi-gang switches use of a 25mm mounting box will provide increased wiring space. - Supplied with M3.5 x 20mm long fixing screws.

WFPS22PSW

WFPS22WBSW

WFPS12PBW

WFPS12BNB


DecorativeDimmers


Raised Plate 1 Gang Dimmer 400W

Polished Steel WRDS1PS

Brushed Steel WRDS1BS

Polished Brass WRDS1PB

Black Nickel WRDS1BN

















Flat Plate 1 Gang Dimmer 400W

Polished Steel WFDS1PS

Brushed Steel WFDS1BS

Polished Brass WFDS1PB

Black Nickel WFDS1BN
















Dimmers Raised Plate

Dimmers Flat Plate

Characteristics: - Quick press for ON/OFF, hold button down to dim or brighten light level. - Leading edge. - Soft start feature prolongs lamp life. - Suitable for dimming mains and dimmable transformer extra low voltage lamps. - Automatic switch off in the case of transformer instability, protects the dimmer and the transformer. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WFDS1PS

WFDS1PB

WRDS2BN

WRDS2BS

WRDS3PS


DecorativeIsolator Switches, Socket Outlets


Raised Plate 3 Pole Fan Isolator Switch

Polished Steel WRPS3PIPSW WRPS3PIPSB

Brushed Steel WRPS3PIBSW WRPS3PIBSB

Polished Brass WRPS3PIPBW WRPS3PIPBB

Black Nickel - WRPS3PIBNB


Raised Plate 1 Gang Double Pole Switched Socket

Polished Steel WRSS81PSW WRSS81PSB

Brushed Steel WRSS81BSW WRSS81BSB

Polished Brass WRSS81PBW WRSS81PBB

Black Nickel - WRSS81BNB

Raised Plate 2 Gang Double Pole Switched Socket Dual Earth

Polished Steel WRSS82PSW WRSS82PSB

Brushed Steel WRSS82BSW WRSS82BSB

Polished Brass WRSS82PBW WRSS82PBB

Black Nickel - WRSS82BNB

Raised Plate 5A 1 Gang Unswitched Socket

Polished Steel WRS51PSW WRS51PSB

Brushed Steel WRS51BSW WRS51BSB

Polished Brass WRS51PBW WRS51PBB

Black Nickel - WRS51BNB

Raised Plate 2 Gang Double Pole Dual Earth Switched Socket & Two USB Ports

Polished Steel WRSS82PSW-USB WRSS82PSB-USB

Brushed Steel WRSS82BSW-USB WRSS82BSB-USB

Polished Brass WRSS82PBW-USB WRSS82PBB-USB

Black Nickel WRSS82BNB-USB


Flat Plate 3 Pole Fan Isolator Switch

Polished Steel WFPS3PIPSW WFPS3PIPSB

Brushed Steel WFPS3PIBSW WFPS3PIBSB

Polished Brass WFPS3PIPBW WFPS3PIPBB

Black Nickel - WFPS3PIBNB

Isolator Switches Raised Plate

Socket Outlets Raised Plates

Isolator Switches Flat Plate

Characteristics: - Complies with BS EN 60669-2-4. - Capacity of each terminal 2 x 4.0mm² conductors. - For mounting boxes see selection chart on page 58. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

Characteristics: - Unique patented three part safety shutter. - Complies with BS 1363 Part 2, a.c only. - Double pole switching mechanism on switched sockets. - Twin socket comes with twin earth as standard. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal: 3 x 4mm² conductors, switched & unswitched (for other sized conductors see terminal capacities on page 59).

- For mounting boxes see selection chart on page 58. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws. - Sockets with USB connections - Warning: To avoid possible damage to the product or spurious insulation readings, please disconnect the product before carrying out insulation resistance testing.

- Sockets with USB connections: USB output: 5V d.c. 2.4A total max. - All decorative USB sockets come with spacer colour matched to insert and 30mm & 20mm screws.

WRPS3PIPSW

WFPS3PIBNB

WRSS81PBW

WRSS81BNB

WRSS82PBB

WRSS82PSW-USB


DecorativeDimmers, Cooker Control Unit


Raised Plate 45A Cooker Control Unit

Polished Steel WRCC50NPSW WRCC50NPSB

Brushed Steel WRCC50NBSW WRCC50NBSB

Polished Brass WRCC50NPBW WRCC50NPBB

Black Nickel - WRCC50NBNB


Flat Plate 45A Cooker Control Unit

Polished Steel WFCC50NPSW WFCC50NPSB

Brushed Steel WFCC50NBSW WFCC50NBSB

Polished Brass WFCC50NPBW WFCC50NPBB

Black Nickel - WFCC50NBNB


Flat Plate 1 Gang Double Pole Switched Socket

Polished Steel WFSS81PSW WFSS81PSB

Brushed Steel WFSS81BSW WFSS81BSB

Polished Brass WFSS81PBW WFSS81PBB

Black Nickel - WFSS81BNB

Flat Plate 2 Gang Double Pole Switched Socket Dual Earth

Polished Steel WFSS82PSW WFSS82PSB

Brushed Steel WFSS82BSW WFSS82BSB

Polished Brass WFSS82PBW WFSS82PBB

Black Nickel - WFSS82BNB

Flat Plate 5A 1 Gang Unswitched Socket

Polished Steel WFS51PSW WFS51PSB

Brushed Steel WFS51BSW WFS51BSB

Polished Brass WFS51PBW WFS51PBB

Black Nickel - WFS51BNB

Raised Plate 2 Gang Double Pole Dual Earth Switched Socket & Two USB Ports

Polished Steel WFSS82PSW-USB WFSS82PSB-USB

Brushed Steel WFSS82BSW-USB WFSS82BSB-USB

Polished Brass WFSS82PBW-USB WFSS82PBB-USB

Black Nickel WFSS82BNB-USB

Cooker Control Unit Raised Plate

Cooker Control Unit Flat Plate

Socket Outlets Flat Plates

Characteristics: - Complies with BS 4177. - Switch and socket are double pole with twin earth as standard. - Main switch is suitable for isolation. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of terminals 2 x 6.0mm², 1 x 16.0mm ². - For mounting boxes see selection chart on page 58. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WRCC50NPSB

WRCC50NBNB

WFSS81BSW

WFSS82PBW

WFSS82BNB-USB

WFSS82BSW-USB

WFCC50NPSW


DecorativeFused Connection Units


Raised Plate 13A FCU Switched

Polished Steel WRSSU83PSW WRSSU83PSB

Brushed Steel WRSSU83BSW WRSSU83BSB

Polished Brass WRSSU83PBW WRSSU83PBB

Black Nickel - WRSSU83BNB

Raised Plate 13A FCU Switched with Flex Outlet

Polished Steel WRSSU83FOPSW WRSSU83FOPSB

Brushed Steel WRSSU83FOBSW WRSSU83FOBSB

Polished Brass WRSSU83FOPBW WRSSU83FOPBB

Black Nickel - WRSSU83FOBNB

Raised Plate 13A FCU Unswitched

Polished Steel WRSU83PSW WRSU83PSB

Brushed Steel WRSU83BSW WRSU83BSB

Polished Brass WRSU83PBW WRSU83PBB

Black Nickel - WRSU83BNB


Flat Plate 13A FCU Switched

Polished Steel WFSSU83PSW WFSSU83PSB

Brushed Steel WFSSU83BSW WFSSU83BSB

Polished Brass WFSSU83PBW WFSSU83PBB

Black Nickel - WFSSU83BNB

Flat Plate 13A FCU Switched with Flex Outlet

Polished Steel WFSSU83FOPSW WFSSU83FOPSB

Brushed Steel WFSSU83FOBSW WFSSU83FOBSB

Polished Brass WFSSU83FOPBW WFSSU83FOPBB

Black Nickel - WFSSU83FOBNB

Flat Plate 13A FCU Unswitched

Polished Steel WFSU83PSW WFSU83PSB

Brushed Steel WFSU83BSW WFSU83BSB

Polished Brass WFSU83PBW WFSU83PBB

Black Nickel - WFSU83BNB

Fused Connection Units Raised Plate

Fused Connection Units Flat Plate

Characteristics: - Complies with BS 1363-4. - Single screw fast fix cable clamp accommodates up to 1.5mm² flexible cord. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal 2 x 6.0 mm² conductors. - For mounting boxes see selection chart on page 58. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WRSSU83FOBSW

WRSSU83PBB

WFSU83BSW

WFSSU83FOBNB


DecorativeDouble Pole Switches


Raised Plate 20A Double Pole Switch

Polished Steel WRDP84PSW WRDP84PSB

Brushed Steel WRDP84BSW WRDP84BSB

Polished Brass WRDP84PBW WRDP84PBB

Black Nickel - WRDP84BNB

Raised Plate 20A Double Pole Switch with Flex Outlet

Polished Steel WRDP84FOPSW WRDP84FOPSB

Brushed Steel WRDP84FOBSW WRDP84FOBSB

Polished Brass WRDP84FOPBW WRDP84FOPBB

Black Nickel - WRDP84FOBNB

Raised Plate 20A Double Pole Switch with LED Indicator

Polished Steel WRDP84NPSW WRDP84NPSB

Brushed Steel WRDP84NBSW WRDP84NBSB

Polished Brass WRDP84NPBW WRDP84NPBB

Black Nickel - WRDP84NBNB


Flat Plate 20A Double Pole Switch

Polished Steel WFDP84PSW WFDP84PSB

Brushed Steel WFDP84BSW WFDP84BSB

Polished Brass WFDP84PBW WFDP84PBB

Black Nickel - WFDP84BNB

Flat Plate 20A Double Pole Switch with Flex Outlet

Polished Steel WFDP84FOPSW WFDP84FOPSB

Brushed Steel WFDP84FOBSW WFDP84FOBSB

Polished Brass WFDP84FOPBW WFDP84FOPBB

Black Nickel - WFDP84FOBNB

Flat Plate 20A Double Pole Switch with LED Indicator

Polished Steel WFDP84NPSW WFDP84NPSB

Brushed Steel WFDP84NBSW WFDP84NBSB

Polished Brass WFDP84NPBW WFDP84NPBB

Black Nickel - WFDP84NBNB

Double Pole Switches Raised Plate (20A)

Double Pole Switches Flat Plate (20A)

Characteristics: - Complies with BS EN 60699-2-4 a.c. only. - Single screw fast fix cable clamp accommodates up to 1.5mm² flexible cord. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal 2 x 6.0mm² conductors. - For mounting boxes see selection chart on page 58. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WFDP84BSW

WRDP84PBW

WRDP84BNB

WFDP84FOPSW


DecorativeDouble Pole Switches, Shaver Sockets


Raised Plate 50A Double Pole Switch 1 Gang with LED Indicator

Polished Steel WRDP50NPSW WRDP50NPSB

Brushed Steel WRDP50NBSW WRDP50NBSB

Polished Brass WRDP50NPBW WRDP50NPBB

Black Nickel - WRDP50NBNB


Raised Plate 115/230V Shaver Socket

Polished Steel WRSO100PSW WRSO100PSB

Brushed Steel WRSO100BSW WRSO100BSB

Polished Brass WRSO100PBW WRSO100PBB

Black Nickel - WRSO100BNB


Flat Plate 115/230V Shaver Socket

Polished Steel WFSO100PSW WFSO100PSB

Brushed Steel WFSO100BSW WFSO100BSB

Polished Brass WFSO100PBW WFSO100PBB

Black Nickel - WFSO100BNB


Flat Plate 50A Double Pole Switch 1 Gang with LED Indicator

Polished Steel WFDP50NPSW WFDP50NPSB

Brushed Steel WFDP50NBSW WFDP50NBSB

Polished Brass WFDP50NPBW WFDP50NPBB

Black Nickel - WFDP50NBNB

Double Pole Switches Raised Plate (50A)

Shaver Socket Raised Plate

Shaver Socket Flat Plate

Double Pole Switches Flat Plate (50A)

Characteristics: - Complies with BS EN 60669-2-4. - Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B curve MCB. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal 2 x 6mm², 1 x 10mm². - For mounting boxes see selection chart on page 58. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

Characteristics: - Complies with BS EN 61558-2-5. - Capacity of each terminal 2 x 2.5mm² conductors. - Designed for use in bath/shower rooms & incorporates a double wound transformer for an earth free supply. - Designed to supply electric shavers rated 50 VA or less. - Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets. - Rating 20VA on either voltage. - Primary circuit protected by a self resetting thermal overload device. - Insertion of shaver plug automatically switches on the transformer. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WFDP50NPSB

WRDP50NPBB

WRSO100PSW

WFSO100PSW


DecorativeTelephone & Data


Raised Plate BT Master Telephone Outlet

Polished Steel WRBTMPSW WRBTMPSB

Brushed Steel WRBTMBSW WRBTMBSB

Polished Brass WRBTMPBW WRBTMPBB

Black Nickel - WRBTMBNB

Raised Plate BT Secondary Telephone Outlet

Polished Steel WRBTSPSW WRBTSPSB

Brushed Steel WRBTSBSW WRBTSBSB

Polished Brass WRBTSPBW WRBTSPBB

Black Nickel - WRBTSBNB

Raised Plate RJ45 Socket

Polished Steel WRRJ45PSW WRRJ45PSB

Brushed Steel WRRJ45BSW WRRJ45BSB

Polished Brass WRRJ45PBW WRRJ45PBB

Black Nickel - WRRJ45BNB


Flat Plate BT Master Telephone Outlet

Polished Steel WFBTMPSW WFBTMPSB

Brushed Steel WFBTMBSW WFBTMBSB

Polished Brass WFBTMPBW WFBTMPBB

Black Nickel - WFBTMBNB

Flat Plate BT Secondary Telephone Outlet

Polished Steel WFBTSPSW WFBTSPSB

Brushed Steel WFBTSBSW WFBTSBSB

Polished Brass WFBTSPBW WFBTSPBB

Black Nickel - WFBTSBNB

Flat Plate RJ45 Socket

Polished Steel WFRJ45PSW WFRJ45PSB

Brushed Steel WFRJ45BSW WFRJ45BSB

Polished Brass WFRJ45PBW WFRJ45PBB

Black Nickel - WFRJ45BNB

Telephone & Data Raised Plate

Telephone & Data Flat Plate

Characteristics: - BT sockets comply with BS 6312-2. - Supplied with fitted cable tie. - Quick connection with insulation displacement terminals. - Clearly printed terminal marking. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WRBTMBSW

WRBTMPBW

WFBTMPSW

WFBTMBNB


DecorativeTV & Satellite


Raised Plate Single F Type Satellite Outlet Screened

Polished Steel WRSATPSW WRSATPSB

Brushed Steel WRSATBSW WRSATBSB

Polished Brass WRSATPBW WRSATPBB

Black Nickel - WRSATBNB

Raised Plate Single CO-AX TV Outlet Female

Polished Steel WRTVFPSW WRTVFPSB

Brushed Steel WRTVFBSW WRTVFBSB

Polished Brass WRTVFPBW WRTVFPBB

Black Nickel - WRTVFBNB

Raised Plate Double TV & FM/DAB CO-AX Socket Outlet

Polished Steel WRDXPSW WRDXPSB

Brushed Steel WRDXBSW WRDXBSB

Polished Brass WRDXPBW WRDXPBB

Black Nickel - WRDXBNB

Raised Plate Triplexer TV, FM/DAB & Satellite Outlet

Polished Steel WRTXPSW WRTXPSB

Brushed Steel WRTXBSW WRTXBSB

Polished Brass WRTXPBW WRTXPBB

Black Nickel - WRTXBNB

Raised Plate Quadplexer TV, FM/DAB, Satellite 1 & Satellite 2 Outlet

Polished Steel WRQXPSW WRQXPSB

Brushed Steel WRQXBSW WRQXBSB

Polished Brass WRQXPBW WRQXPBB

Black Nickel - WRQXBNB


Flat Plate Single F Type Satellite Outlet Screened

Polished Steel WFSATPSW WFSATPSB

Brushed Steel WFSATBSW WFSATBSB

Polished Brass WFSATPBW WFSATPBB

Black Nickel - WFSATBNB

Flat Plate Single CO-AX TV Outlet Female

Polished Steel WFTVFPSW WFTVFPSB

Brushed Steel WFTVFBSW WFTVFBSB

Polished Brass WFTVFPBW WFTVFPBB

Black Nickel - WFTVFBNB

TV & Satellite Raised Plate

TV & Satellite Flat Plate

Characteristics: - TV outlets comply with BS 3041. - Satellite outlets comply with BS EN 50083-2. - Fully screened. - DAB compatible. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WRSATBSW

WRSATPSW

WRDXPBW

WRTXBNB

WFTVFBSW


DecorativeTV & Satellite, Euro Frontplates


Raised Plate 1 Module

Polished Steel WRP1EUPSW WRP1EUPSB

Brushed Steel WRP1EUBSW WRP1EUBSB

Polished Brass WRP1EUPBW WRP1EUPBB

Black Nickel - WRP1EUBNB

Raised Plate 2 Modules





Raised Plate 4 Modules





Euro Frontplates Raised Plate

TV & Satellite Flat Plate Continued

Characteristics: - Carrier plates facilitate installation of industry standard modules. - Easy to configure for all applications. - Quick release of modules for maintenance. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WFDXBSW


Flat Plate Double TV & FM/DAB CO-AX Socket Outlet

Polished Steel WFDXPSW WFDXPSB

Brushed Steel WFDXBSW WFDXBSB

Polished Brass WFDXPBW WFDXPBB

Black Nickel - WFDXBNB

Flat Plate Triplexer TV, FM/DAB & Satellite Outlet

Polished Steel WFTXPSW WFTXPSB

Brushed Steel WFTXBSW WFTXBSB

Polished Brass WFTXPBW WFTXPBB

Black Nickel - WFTXBNB

Flat Plate Quadplexer TV, FM/DAB, Satellite 1 & Satellite 2 Outlet

Polished Steel WFQXPSW WFQXPSB

Brushed Steel WFQXBSW WFQXBSB

Polished Brass WFQXPBW WFQXPBB

Black Nickel - WFQXBNB

WRP1EUPSB

WRP1EUPSB

WRP1EUPBW


DecorativeEuro Frontplates


Flat Plate 1 Module

Polished Steel WFP1EUPSW WFP1EUPSB

Brushed Steel WFP1EUBSW WFP1EUBSB

Polished Brass WFP1EUPBW WFP1EUPBB

Black Nickel - WFP1EUBNB

Flat Plate 2 Modules





Flat Plate 4 Modules





Euro Frontplates Flat Plate

Characteristics: - Carrier plates facilitate installation of industry standard modular data outlets. - Easy to configure for all applications. - Quick release of modules for maintenance. - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WFP1EUBSB

WFP1EUBNB


BT Telephone Master Euromodule 1 WMMBTM WMMBTMB

BT Telephone Secondary Euromodule 1 WMMBTS WMMBTSB

RJ11 - Modem Euromodule 1 WMMRJ11 WMMRJ11B

RJ45 - Cat 6 UTP Euromodule 1 WMMRJ45 WMMRJ45B

Phono Plugs - Red/Black - Gold Plated Euromodule 1 WMMPP -

Speaker Terminal Posts - Gold Plated Euromodule 1 WMMSP -

Single IEC Female Non Isolated Euromodule 1 WMMTVF WMMTVFB

Single IEC Male Non Isolated Euromodule 1 WMMTVM WMMTVMB

Single Satellite F Connector Euromodule 1 WMMSAT WMMSATB

Single Blank Euromodule 1 WMMB WMMBB

PIR Occupancy Sensor Euromodule 5m 1 WMMPIR05X -


HDMI Module 2 WMMHDMI WMMHDMIB

USB Euromodule with Twin USB 2 WMMUSB WMMUSBB

Diplexer - TV & FM Radio Euromodule 2 WMMDX WMMDXB

Triplexer - TV, Satellite & FM Radio Euromodule 2 WMMTX WMMTXB

Quadplexer - TV, Satellite, FM Radio & Return Euromodule 2 WMMQX WMMQXB

Euro Style Modules

WMMBTM WMMSAT

WMMQXB


DecorativeEuro Lounge Plates, Grid Plates


Flat Plate Lounge Plate for TV, Power & Data

Polished Steel WFTVLPPSW WFTVLPPSB

Brushed Steel WFTVLPBSW WFTVLPBSB

Black Nickel - WFTVLPBNB

White Metal WFTVLPWW -

Raised Plate Lounge Plate for TV, Power & Data

White Metal WRTVLPWW -

Lounge Plate Back Box

Steel WFTVBOX -

Euro Lounge Plates

Grid Plates Raised Plate

WFTVLPPSW


Raised Plate 1 Gang Grid Plate

Polished Steel WRGP1PS

Brushed Steel WRGP1BS

Polished Brass WRGP1PB

Black Nickel WRGP1BN
















Raised Plate 6 Gang (3 x 2) Grid Plate















WFGP1PS

WRGP12BS

WRGP1PB


DecorativeGrid Plates, Grid Frames


Frames for White Moulded and Decorative Raised Plate ranges

1 Gang Frame WMGF1

2 Gang Frame WMGF2

3/4 Gang Frame WMGF34

Frames for Decorative Flat Plate ranges

1 Gang Frame WFGF1

2 Gang Frame WFGF2

3/4 Gang Frame WFGF34

Grid Plates Flat Plate

Grid Frames


Flat Plate 1 Gang Grid Plate

Polished Steel WFGP1PS

Brushed Steel WFGP1BS

Polished Brass WFGP1PB

Black Nickel WFGP1BN
















Flat Plate 6 Gang (3 x 2) Grid Plate















WFGP1PS

WFGP2BS

WFGP3PB

WMGF34


DecorativeGrid Switches

WMINDRED

WMGKS

WMGSDP2/CHD

WMGB1

WMGSDP2/EF


Grid Switches


















13A Fused Connection Unit Unswitched with LED WMGSU83N -


























Grid Switches - White Moulded Finish




WMGSDP2N/CHD

WMGSDP2N/DW

WMGSDP2N/EF

WMGSDP2N/FF



















Grid Switches - Printed




WMGB1BSW

WMGS12PBW

WMGS12PSB

WMGB1BNB

WMGB1BSW


20AX 2 Way Single Pole Switch

Polished Steel WMGS12PSW WMGS12PSB

Brushed Steel WMGS12BSW WMGS12BSB

Polished Brass WMGS12PBW WMGS12PBB

Black Nickel - WMGS12BNB

20A Intermediate Switch

Polished Steel WMGS16PSW WMGS16PSB

Brushed Steel WMGS16BSW WMGS16BSB

Polished Brass WMGS16PBW WMGS16PBB

Black Nickel - WMGS16BNB

20A 2 Way Retractive Switch

Polished Steel WMGS22RPSW WMGS22RPSB

Brushed Steel WMGS22RBSW WMGS22RBSB

Polished Brass WMGS22RPBW WMGS22RPBB

Black Nickel - WMGS22RBNB

20A 1 Way Double Pole Switch

Polished Steel WMGSDP2PSW WMGSDP2PSB

Brushed Steel WMGSDP2BSW WMGSDP2BSB

Polished Brass WMGSDP2PBW WMGSDP2PBB

Black Nickel - WMGSDP2BNB

13A Fuse Carrier

Polished Steel WMGFU13PSW WMGFU13PSB

Brushed Steel WMGFU13BSW WMGFU13BSB

Polished Brass WMGFU13PBW WMGFU13PBB

Black Nickel - WMGFU13BNB

Blank Module

Polished Steel WMGB1PSW WMGB1PSB

Brushed Steel WMGB1BSW WMGB1BSB

Polished Brass WMGB1PBW WMGB1PBB

Black Nickel - WMGB1BNB

Grid Switches - Decorative Finish

Characteristics: - Complies with BS EN 606691-1 switches, BS 5733 fuse carrier. - Shallowest switch modules for ease of installation. - Modules clip from the front for ease of installation and maintenance. - Terminal screw can be accessed with modules clipped into frames. - Frames locate to finished wall level. - Frames clip to ease alignment for 6 gang and 8 gang applications.


Decorative Blank Plates


Raised Plate Switch Blank Plate

Polished Steel WRP1PS

Brushed Steel WRP1BS

Polished Brass WRP1PB

Black Nickel WRP1BN

Raised Plate Twin Blank Plate

Polished Steel WRP2PS

Brushed Steel WRP2BS

Polished Brass WRP2PB

Black Nickel WRP2BN


Flat Plate Switch Blank Plate

Polished Steel WFP1PS

Brushed Steel WFP1BS

Polished Brass WFP1PB

Black Nickel WFP1BN

Flat Plate Twin Blank Plate

Polished Steel WFP2PS

Brushed Steel WFP2BS

Polished Brass WFP2PB

Black Nickel WFP2BN

Blank Plates Raised Plate

Blank Plates Flat Plate

Characteristics: - WR references supplied with M3.5 x 30mm long fixing screws. - WF references supplied with M3.5 x 20mm long fixing screws.

WRP2PS

WFP1BS

WFP2PB

WRP2PB


MetalcladSwitches, Sockets

Description Cat ref. Plate OnlyCat ref. With Backbox Without Knockouts

Cat ref. With Backbox With Knockouts

Wall Switches White

10AX 1 Gang 2 Way Wall Switch WPPS12W WPPS12BW WPPS12BKOW



10AX Push Switch WPPS12RW WPPS12RBW WPPS12RBKOW

Wall Switches Grey

10AX 1 Gang 2 Way Wall Switch WPPS12 WPPS12B WPPS12BKO



10AX Push Switch WPPS12R WPPS12RB WPPS12RBKO

Metalclad Wall Switches (10A)



Characteristics: - Unique patented LOOP terminal to allow neutral looping at the switch. - Complies with BS EN 60669-1, a.c only. - ‘X’ rated - No need to de-rate for fluorescent loads. - Capacity of each terminal 2 x 4.0mm² conductors.

Characteristics: - Unique patented LOOP terminal to allow neutral looping at the switch. - Complies with BS EN 60669-1, a.c only. - Capacity of each terminal 2 x 6.0mm² conductors.

Characteristics: - Unique patented LOOP terminal to allow neutral looping at the switch. - Complies with BS EN 60669-2-4. - Capacity of each terminal 2 x 6.0mm² conductors.

WPPS12W

WPPS12

WPDP50N

WPDP84FO



Wall Switches White

50A Double Pole Switch 1 Gang with LED Indicator WPDP50NW WPDP50NBW WPDP50NBKOW

Wall Switches Grey

50A Double Pole Switch 1 Gang with LED Indicator WPDP50N WPDP50NB WPDP50NBKO



Wall Switches White

20A Double Pole Switch with Flex Outlet WPDP84FOW WPDP84FOBW WPDP84FOBKOW

20A Double Pole Switch with LED Indicator & Flex Outlet WPDP84FONW WPDP84FONBW WPDP84FONBKOW

Wall Switches Grey

20A Double Pole Switch with Flex Outlet WPDP84FO WPDP84FOB WPDP84FOBKO

20A Double Pole Switch with LED Indicator & Flex Outlet WPDP84FON WPDP84FONB WPDP84FONBKO


MetalcladFused Connection Units, Grid Plates



Switched Socket Outlets White

1 Gang Double Pole Switched Socket WPSS81W WPSS81BW WPSS81BKOW

1 Gang Double Pole Switched Socket with LED Indicator WPSS81NW WPSS81NBW WPSS81NBKOW

2 Gang Double Pole Switched Socket WPSS82W WPSS82BW WPSS82BKOW

2 Gang Double Pole Switched Socket with LED Indicator WPSS82NW WPSS82NBW WPSS82NBKOW

2 Gang Double Pole Switched Socket Outboard Rockers WPSS82OW WPSS82OBW WPSS82OBKOW

2 Gang Double Pole Switched Socket with Two USB Ports WPSS82W-USB WPSS82BW-USB WPSS82BKOW-USB

Switched Socket Outlets Grey

1 Gang Double Pole Switched Socket WPSS81 WPSS81B WPSS81BKO

1 Gang Double Pole Switched Socket with LED Indicator WPSS81N WPSS81NB WPSS81NBKO

2 Gang Double Pole Switched Socket WPSS82 WPSS82B WPSS82BKO

2 Gang Double Pole Switched Socket with LED Indicator WPSS82N WPSS82NB WPSS82NBKO

2 Gang Double Pole Switched Socket Outboard Rockers WPSS82O WPSS82OB WPSS82OBKO

2 Gang Double Pole Switched Socket with Two USB Ports WPSS82-USB WPSS82B-USB WPSS82BKO-USB

Metalclad Socket Outlets

Characteristics: - Unique patented three part safety shutter. - Complies with BS 1363-2, a.c only. - Double pole switching mechanism on switched sockets. - Twin socket comes with twin earth as standard. - Terminal screws grouped in-line and upward facing for ease of installation with clear printed and engraved terminal markings. - Capacity of each terminal: 5 x 2.5mm² conductors switched; 4 x 2.5mm² unswitched (for other sized conductors see terminal capacities on page 59).

- Sockets with USB - Warning: To avoid possible damage to the product or spurious insution readings, please disconnect the product before carrying out insulation resistance testing.

- Sockets with USB - USB output: 5V d.c. 2.4A total max. WPSS81W

WPSS81

WPSS82W-USB

Description Cat ref. Plate OnlyCat ref. With BackboxWithout Knockouts

Cat ref. With BackboxWith Knockouts

Fuse Connection Units White

13A FCU Unswitched with Flex Outlet WPSU83FOW WPSU83FOBW WPSU83FOBKOW

13A FCU Switched with Flex Outlet WPSSU83FOW WPSSU83FOBW WPSSU83FOBKOW

13A FCU Switched with LED Indicator & Flex Outlet WPSSU83FONW WPSSU83FONBW WPSSU83FONBKOW

Fuse Connection Units Grey

13A FCU Unswitched with Flex Outlet WPSU83FO WPSU83FOB WPSU83FOBKO

13A FCU Switched with Flex Outlet WPSSU83FO WPSSU83FOB WPSSU83FOBKO

13A FCU Switched with LED Indicator & Flex Outlet WPSSU83FON WPSSU83FONB WPSSU83FONBKO

Metalclad Fuse Connection Units

Characteristics: - Complies with BS 1363-4. - Single screw fast fix cable clamp accommodates up to 1.5mm² flexible cord. - All terminals are upward facing with clearly printed terminal markings for ease of installation. - Capacity of each terminal 2 x 6.0 mm² conductors.

WPSSU83FOW

WPSSU83FON




Grid Plates White

Grid plate 1 Gang WPGP1W WPGP1BW WPGP1BKOW






Grid Plates Grey

Grid plate 1 Gang WPGP1 WPGP1B WPGP1BKO






Metalclad Grid Plates

Characteristics: - For Grid Switches, please see page 42.

WPGP1

WPGP1W


Frames for White Moulded, Decorative & Metalclad Raised Plate ranges

1 Gang Frame WMGF1

2 Gang Frame WMGF2

3/4 Gang Frame WMGF34

Grid Frames

WMGF34

WMINDRED

WMGKS

WMGB1

Grid Switches - White Moulded Finish



Grid Switches


















13A Fused Connection Unit Unswitched with LED WMGSU83N -

MetalcladGrid Plates, Frames & Switches


WMGSDP2/CHD

WMGSDP2/EF












































Grid Switches with LED Indicator - Printed


WMGSDP2N/CHD

WMGSDP2N/DW

WMGSDP2N/EF

Metalclad Grid Switches


MetalcladEuro Plates, Modules



Euro Plates White1 Module Euro Plate WPP1EUW WPP1EUBW WPP1EUBKOW

2 Module Euro Plate WPP2EUW WPP2EUBW WPP2EUBKOW

4 Module Euro Plate WPP4EUW WPP4EUBW WPP4EUBKOW

Euro Plates Grey1 Module Euro Plate WPP1EU WPP1EUB WPP1EUBKO

2 Module Euro Plate WPP2EU WPP2EUB WPP2EUBKO

4 Module Euro Plate WPP4EU WPP4EUB WPP4EUBKO

Metalclad Euro Plates

Characteristics: - Carrier plates facilitate installation of industry standard modular data outlets. - Easy to configure for all applications. - Quick release of modules for maintenance. - Available as plate only for installation with standard wall box.

WPP1EUW

WPP1EU


BT Telephone Master Euromodule 1 WMMBTM WMMBTMB

BT Telephone Secondary Euromodule 1 WMMBTS WMMBTSB

RJ11 - Modem Euromodule 1 WMMRJ11 WMMRJ11B

RJ45 - Cat 6 UTP Euromodule 1 WMMRJ45 WMMRJ45B

Phono Plugs - Red/Black - Gold Plated Euromodule 1 WMMPP -

Speaker Terminal Posts - Gold Plated Euromodule 1 WMMSP -

Single IEC Female Non Isolated Euromodule 1 WMMTVF WMMTVFB

Single IEC Male Non Isolated Euromodule 1 WMMTVM WMMTVMB

Single Satellite F Connector Euromodule 1 WMMSAT WMMSATB

Single Blank Euromodule 1 WMMB WMMBB



HDMI Module 2 WMMHDMI WMMHDMIB

USB Euromodule with Twin USB 2 WMMUSB WMMUSBB

Diplexer - TV & FM Radio Euromodule 2 WMMDX WMMDXB

Triplexer - TV, Satellite & FM Radio Euromodule 2 WMMTX WMMTXB

Quadplexer - TV, Satellite, FM Radio & Return Euromodule 2 WMMQX WMMQXB

Euro Style Modules

WMMBTM WMMSAT

WMMQXB


MetalcladAccessories



Accessories WhiteSingle Backbox - WPB140W WPB140KOW

Twin Backbox - WPB240W WPB240KOW

Two Row Twin Backbox - WPB6840W WPB6840KOW

Accessories GreySingle Backbox - WPB140 WPB140KO

Twin Backbox - WPB240 WPB240KO

Two Row Twin Backbox - WPB6840 WPB6840KO

Metalclad Back Boxes

Metalclad Blank Plates

WPB140W

WPP1W

WPB140KO

WPP1



Blank Plates White

Single Blank Plate WPP1W WPP1BW WPP1BKOW

Twin Blank Plate WPP2W WPP2BW WPP2BKOW

Blank Plates Grey

Single Blank Plate WPP1 WPP1B WPP1BKO

Twin Blank Plate WPP2 WPP2B WPP2BKO


IP66Wall Switches, Socket Outlets, Fused Connection Units

Dimensions (mm)

Description (W x H) Cat ref.

10AX 1 Gang 2 Way Switch 90 x 90 WXPPS12

10AX 2 Gang 2 Way Switch 90 x 90 WXPPS22

20AX Double Pole 1 Gang 1 Way Switch 90 x 90 WXPDP84

10A 1 Gang Bell Push Switch 90 x 90 WXPPS12B

Dimensions (mm)


13A 1 Gang Double Pole Unswitched Socket 103 x 116.5 WXPS81

13A 1 Gang Double Pole Switched Socket 103 x 116.5 WXPSS81

13A 2 Gang Double Pole Unswitched Socket 164 x 116.5 WXPS82

13A 2 Gang Double Pole Switched Socket 164 x 116.5 WXPSS82

Dimensions (mm)


13A Double Pole Fused Connect Unit with Flex Outlet 103 x 116.5 WXPSSU83FO

Wall Switches

Socket Outlets

Fused Connection Units

Characteristics: - IP66 rating conforms to BS EN 60529 : 1992. - Functional products tested and certified to BS EN 60669-1, a.c. only. - Robust and rugged enclosures designed to withstand the elements. - Cable entries: 90 x 90 = 4x20, 1x20 & 1x25

Characteristics: - IP66 rating conforms to BS EN 60529 : 1992. - Functional products tested and certified to BS 1363 Part 2, a.c. only. - Robust and rugged enclosures designed to withstand the elements. - Unique double hinge allows lid to open a full 180 degrees. - Fixing point for padlock. - Cable entries: 103 x 116.5 = 4x20, 1x20 & 1x25

164 x 116.5 = 6x20, 1x20 & 1x25

Characteristics: - IP66 rating conforms to BS EN 60529 : 1992. - Functional products tested and certified to BS 1363-4. - Robust and rugged enclosures designed to withstand the elements. - Unique double hinge allows lid to open a full 180 degrees. - Fixing point for padlock. - Cable entries: 103 x 116.5 = 4x20, 1x20 & 1x25

WXPPS12

WXPSS82

WXPSSU83FO

Robust& SafeManufactured from a tough, durable thermoplastic, the Sollysta IP66 range is ideal for indoor and outdoor applications where wiring accessories may be vulnerable to the potentially harmful effects of dust or water ingress.

See more about Sollysta IP66 on our website www.hager.co.uk


Junction BoxesTraditional, Maintenance Free, Downlighter, Adaptable

Description Terminal capacity Pack qty. Cat ref.

Downlighter Junction Box 3 x (3 x 1.5mm²)1 x (2 x 1.5mm²)

10 J501


No Terminals - 10 J701

With Terminal Block, Cable Ties & Related Wiring Card 4 x 1.5mm² 10 J701/TB

Description Terminal capacity (mm2) Pack qty. Cat ref.

Knockout Slot Terminal Junction Box 20A 4 Terminal 3 x 1.5 10 J201

Selective Entry Slot Terminal Junction Box 20A 4 Terminal 3 x 1.5 10 J301




Maintenance Free 32A - 3 Terminals 4 x 4mm² x (0.5 - 4.0) 10 J803

Maintenance Free 20A - 4 Terminals 4 x 4mm² x (0.5 - 4.0) 10 J804

Downlighter Junction Box

Junction / Adaptable Box

Traditional Junction Box

Maintenance Free Junction Box

Characteristics: - Comes complete with incoming and outgoing cable clamps to prevent strain on terminations. - Three plate terminals with separate terminals for flexible cords. - Complies with BS EN 60670-22. - Fits through a 58mm diameter hole. - 3 plate terminal style with captive terminal screws. - Separate terminals for flexible cords. - Current rating: 16 Amp. - Junction box selection chart see page 61.

Characteristics: - Junction box cover secured by two screws - Accepts 16mm x 16mm and /or 16mm x 25mm mini-trunking. - Junction box selection chart see page 61.

Characteristics: - Complies with BS EN 60670-22. - Slot terminals are ideal for taking spurs off uncut ring or loop circuit cables. - Solid machined brass terminals. - Junction box covers secured by single centre screws. - Junction box selection chart see page 61.

Characteristics: - Complies with BS EN 60670-22. - Suitable for use in inaccessible areas. - Spring fit terminals do not relax over time. - Four separate cable terminations per connector. - Comes complete with incoming and outgoing cable clamps. - Junction box selection chart see page 61.

J501

J701/TB

J501

J804

PrintedFor you.We have an extensive range of printed options for Sollysta switches and we also offer a bespoke printing service for your individual requirements.

For a full list of the printing options available please visit hager.co.uk/printedproducts


Ceiling AccessoriesSafety Lampholders, Safety Pendants

Description Pack qty. Cat ref.

Safety Bayonet Cap Cord Grip Lampholders

Cord Grip Lampholders - Short Skirt 20 SEL212

Cord Grip Lampholders - Home Office Shield 20 SEL214

Safety Straight Batten Lampholders

Three Terminal - Home Office Shield 20 SEL354

Safety Access Batten Lampholders

Straight 2 Terminal Body, 3 Terminal and Earth Base - Home Office Shield 10 SEL96T

Angled 2 Terminal Body, 3 Terminal and Earth Base - Home Office Shield 10 SEL106T

Safety Access Batten Lampholder with Safety Cover

Batten Lampholder with Safety Cover 10 SEL96TSC


Safety Pendants Sets with Access Ceiling Rose

Pendant Set 6” - Short Skirt 10 624SEL212/6



Shield Pendant Set 6”- Home Office Shield 10 624SEL214/6

Pendant Set with Access Ceiling Rose with Safety Cover

Pendant Set 6” with Safety Cover 10 624SEL212SC6

Safety Lampholders

Safety Pendants Sets with Access Ceiling Rose

Characteristics: - Complies with BS EN 7895. - T2 heat resistance rating: 210ºC. - Automatically disconnect power at the contacts when the lamp is removed. - 50.8mm fixing centres for non-access versions. Use with mounting blocks MB326E/MT. - Body angle of angled battens set at 30º. - Access lampholders have integral RL624 ceiling rose base and heat resisting PVC tails.

Characteristics: - Pendant set complies with BS EN 60598-1. - Capacity of each terminal: 3 x 1.00mm² conductor. - Barriers between terminals. - Flexible pendant cord restraining hooks. - Fixing centres 50.8mm. - Feet on base to aid mounting on uneven surfaces. - Three separate knockouts accept 1, 2 or 3 x 1.5mm2 conductors. - Optional halo RL602.

SEL212

SEL354

SEL96T

624SEL212/6


Ceiling AccessoriesSafety Pendants

Description Dimensions Pack qty. Cat ref.

Three Terminals 81 Diameter x 26(halo = 108mm diameter)

10 RL624

Description Dimensions Pack qty. Cat ref.

Round Mounting Box with Earth Terminal 81 x 19 20 MB326E/MT

Round Surface Box 30mm Deep 84 x 30 10 MB2


Short Skirt 50 HAL70

Home Office Shield 50 HAL72


Halo (108mm Diameter) 20 RL602


Low Energy Pendant to accommodate GU10-L1 lamp 1 LEL212/6

Super Access Terminal Bank Type Ceiling Rose

Mounting Blocks

Lampholder Skirts

Halo

Low Energy Pendant

Characteristics: - Capacity of each terminal: 3 x 1.00mm² conductor - Common base with ‘access’ batten lampholders. - Barriers between terminals. - Flexible pendant cord restraining hooks. - Fixing centres 50.8mm. - Feet on base to aid mounting on uneven surfaces. - Three separate knockouts accept 1, 2 or 3 x 1.5mm2 conductors. - Optional halo RL602 (see below)

Characteristics: - Capacity of earth terminal for mounting blocks: 3 x 1.5mm². - Cable knockout entries: MB326E/MT - centrally in base. Four on periphery will accept 16mm x 16mm or 16mm x 25mm mini trunking.

Characteristics: - Suitable for use with any lampholder or batten lampholder.

LEL212/6

MB326E/MT

RL602

58 Data is subject to errors and technical modifications.

Sollysta Mounting Box Selection

Product Reference

Product DescriptionStandard Surface Box Reference

Deep Surface Box Reference

WMBTM BT Master Telephone Outlet WMPB1/28 WMPB1/46

WMBTS BT Secondary Telephone Outlet WMPB1/28 WMPB1/46

WMCC50 50A Cooker Control Unit WMPB2/46CC N/A

WMCC50N 50A Cooker Control Unit with LED Indicator WMPB2/46CC N/A

WMDP50N 50A Double Pole Switch 1 Gang with LED Indicator WMPB1/46 N/A

WMDP50VN 50A Double Pole Switch 2 Gang Vertical with LED Indicator WMPB2/46 N/A

WMDP84 20A Double Pole Switch WMPB1/28 WMPB1/46

WMDP84FO 20A Double Pole Switch with Flex Outlet WMPB1/28 WMPB1/46

WMDP84FON 20A Double Pole Switch with LED Indicator & Flex Outlet WMPB1/28 WMPB1/46

WMDP84N 20A Double Pole Switch with LED Indicator WMPB1/28 WMPB1/46

WMDP85FON 20A Double Pole Switch with LED Indicator & Flex Outlet Printed Water Heater WMPB1/28 WMPB1/46

WMDP85N 20A Double Pole Switch with LED Indicator Printed Water Heater WMPB1/28 WMPB1/46

WMDS1 1 Gang Dimmer WMPB1/28 WMPB1/46



WMDS4 4 Gang DImmer WMPB2/28 WMPB2/46

WMDX Double TV & FM/DAB CO-AX Socket Outlet WMPB1/28 WMPB1/46

WMP1 Single Blank Plate WMPB1/20 WMPB1/28

WMP2 Twin Blank Plate WMPB2/28 N/A

WMP2FO Flex Outlet Plate 20A WMPB1/20 WMPB1/28

WMP50FO Cooker Cable Outlet with Terminals WMPB1/46 N/A

WMPS11 10AX 1 Gang 1 Way Wall Switch WMPB1/20 WMPB1/28


WMPS12R Push Switch WMPB1/20 WMPB1/28

WMPS12RB Push Switch with Bell Symbol WMPB1/20 WMPB1/28

WMPS12W 10AX 1 Gang 2 Way Wall Switch Wide Rocker WMPB1/20 WMPB1/28

WMPS16 Intermediate Switch WMPB1/20 WMPB1/28


WMPS22W 10AX 2 Gang 2 Way Wall Switch Wide Rocker WMPB1/20 WMPB1/28


WMPS3PI 3 Pole Isolator Switch WMPB1/20 WMPB1/28

WMPS3PIF 3 Pole Isolator Switch with Fan Symbol WMPB1/20 WMPB1/28


WMQX Quadplexer TV & FM/DAB & SAT1 & SAT2 WMPB1/28 WMPB1/46

WMRJ11 RJ11 Socket WMPB1/28 WMPB1/46

WMRJ45 RJ45 Socket WMPB1/28 WMPB1/46

WMS51 5A 1 Gang Unswitched Socket WMPB1/28 WMPB1/46

WMS81 13A 1 Gang Unswitched Socket WMPB1/28 WMPB1/46

WMS82 13A 2 Gang Unswitched Socket Dual Earth WMPB2/28 WMPB2/46

WMSAT Single F Type Satellite Outlet Screened WMPB1/28 WMPB1/46

WMSO100 115/230V Shaver Outlet WMPB2/46 N/A

WMSS81 1 Gang Double Pole Switched Socket WMPB1/28 WMPB1/46

WMSS82 2 Gang Double Pole Switched Socket Dual Earth WMPB2/28 WMPB2/46

WMSS82O 2 Gang Double Pole Switched Outlet Outboard Rockers WMPB2/28 WMPB2/46

WMSSU83 13A Fused Connection Unit Switched WMPB1/28 WMPB1/46

WMSSU83FO 13A Fused Connection Unit Switched with Flex Outlet WMPB1/28 WMPB1/46

WMSSU83FON 13A Fused Connection Unit Switched with LED Indicator & Flex Outlet WMPB1/28 WMPB1/46

WMSSU83N 13A Fused Connection Unit Switched with LED Indicator WMPB1/28 WMPB1/46

WMSU83 13A Fused Connection Unit Unswitched WMPB1/28 WMPB1/46

WMSU83FO 13A Fused Connection Unit Unswitched with Flex Outlet WMPB1/28 WMPB1/46

WMTVF Single CO-AX TV Socket Outlet Female WMPB1/28 WMPB1/46

WMTVM Single CO-AX TV Socket Outlet Male WMPB1/28 WMPB1/46

WMTX TriplexerTV & FM/DAB & SAT Outlet WMPB1/28 WMPB1/46

59Data is subject to errors and technical modifications.

SollystaTerminal Capacities, Printed Products

Printed ProductsMany of our Sollysta wiring accessories are available with printed options, such as Washing Machine, Dishwasher etc.

For a full list of products generally available from stock please go to www.hager.co.uk/printedproducts

We also offer a bespoke printing service for your individual requirements. Please contact our Sales Service Centre on 01952 675612 for further details.

Unique Safety ShutterSocket outlets have apertures for plug pins and therefore will have a shutter mechanism that prevents access to live parts unless the earth pin is also present and has been inserted first. This however can be either intentionally or inadvertently defeated by inserting something into the earth pin aperture.

All Sollysta sockets have a unique patented three pin shutter system that not only requires the earth pin to be inserted first, but the simultaneous insertion of the live and neutral pins as well, before the shutter mechanism is activated. This enhances the safety by making it more difficult to defeat the mechanism and therefore reducing the risk of electric shock.

Neutral Loop TerminalToday it is increasingly likely that there is a decorative light fitting or even downlighters fitted in place of a standard pendant. These fittings are rarely provided with a neutral loop terminal.

It has also become more popular to make the loop connection at the switch. This has the advantage of the connections being accessible and at a more convenient working height.

However, this leaves the problem of terminating the neutral conductor.

One solution is to connect the neutral to a connector block inside the wall box, which takes up extra space. Another is to use the Sollysta light switch which has a unique neutral loop terminal.

Maximum number of conductors per terminal (Solid or Stranded conductors BS 6004)

Accessory Type Rating 1.0 mm2 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2

Plate & Ceiling Accessories 10AX 4 4 3 2 - - -

Dimmer Switches 10AX 4 3 - - - - -

BS 546 Socket Outlet 5A 3 3 3 2 2 - -

Shaver Socket 10A 4 3 2 - - - -

Fused Connection Units 13A - - 3 2 2 - -

BS 1363 Socket Outlets 13A - - 3 3 2 - -

BS546 Socket Outlet 15A - - 3 3 2 - -

Flex Outlet Plates 20A 5 4 3 2 2 - -

Double Pole Switches 20A - - 3 2 2 1 -

Double Pole Switches 45/50A - - - 3 2 1 1

Cooker Control Unit 45A - - - 3 2 1 1

Cooker Connection Outlet 45A - - - 2 3 - -

Grid Switches 20AX 4 4 3 2 - - -

L N L N L N

LOOP LOOP LOOP


IP66 International Protection (IP) Chart

The IP rating for all low voltage enclosures up to 1000 V a.c. and 1500 V d.c. is defined in identical fashion by the standards EN 60529 - IEC 529. It comprises the letters IP followed by two character numerals and or additional/supplementary letters.

The first character numeral indicates the degree of protection provided by the enclosure against access to hazardous parts by preventing or limiting the ingress of a part of the human body or an object held by a person and ingress of solid foreign objects.

The first character numeral:Protection against foreign objects

IP Description

0 Non-protected

1 Protected against solid objects ≥ than 50mm

2 Protected against solid objects ≥ than 12.5mm



5 Dust-protected

6 Dust-tight

The second character numeral indicates the degree of protection provided by the enclosure with respect to harmful effects on the equipment due to the ingress of water. An X signifies that the tests are not applicable to the product.

The second character numeral:Protection against ingress of water with harmful effects

IP Description

0 Non-protected

1 Protected against vertically falling water drops

2Protected against vertically falling water drops when enclosure titled up to 15°

3 Protected against spraying water

4 Protected against splashing water

5 Protected against water jets

6 Protected against powerful water jets

7Protected against the effect of temporary immersion in water

8Protected against continuous immersion in water

Additional letter (in option)Protection of people against access to hazardous parts

Description

A Protected against access to hazardous parts with the back of the hand

B Protected against access to hazardous parts with a finger

C Protected against access to hazardous parts with a tool - ø 2.5mm

D Protected against access to hazardous parts with a wire - ø 1mm

Additional letter (in option)Specific information on the product

Description

H High voltage apparatus

M Motion during water test

S Stationary during water test

W Weather conditions


Junction BoxesSelection Chart

Description No of Terminals Terminal Rating Reference Benefits / Considerations

Downlighter Junction Box3 x 3 x 1.5mm2

1 x 2 x 1.5mm2 16A J501Provided with cable clamps and separate terminals for flex

Maintenance Free Junction Box3 x 4 x (0.5-4.0mm2) 32A J803 Suitable for use in inaccessible

locations4 x 4 x (0.5 - 4.0mm2) 20A J804

Traditional Junction Boxes

4 20A J201

Acceptable for locations which are accessible

4 20A J301

3 30A J401

6 20A J601

Is the location accessible?

Maintenance Free Terminals Required

Cable Clamping Recommended

Yes

No No

YesIs there a suitable fixing position?

Traditional Junction Boxes Acceptable

Junction Box Selection Chart


Notes

SALESWA218

Hager Ltd.Hortonwood 50TelfordShropshireTF1 7FT

Sales Service Centre: 01952 675612Technical Service Centre: 01952 675689

[email protected]@hager.co.uk

Hager Ltd. - IrelandUnit M2Furry Park Industrial EstateSwords RoadSantry Dublin 9D09 NY19Ireland

Republic of Ireland Tel: 1890 551 502Republic of Ireland Fax: 1890 551 503Northern Ireland Tel: 00 44 7968 147444Northern Ireland Fax: 00 353 1 8869520

[email protected]

wiring accessories - electrika...sollysta wiring accessories sollysta offers a complete range of...

Documents