with dupont™ kevlar®cut resistant-work gloves … · x kevlar® fiber blend with steel x...
TRANSCRIPT
PREMIU
M CU
T RESISTAN
T-WO
RK GLO
VESCU
T RESISTAN
T-WO
RK GLO
VES W
ITH D
UPO
NT™
KEVLAR®
MU
LTI-PURPO
SE WO
RK GLO
VES
Safety at work ™
Professional Grade Coated Work Gloves
Whatever the job, there is a Magid® ROC® glove to keep workers’ hands comfortable, productive and protected.
K E Y F E A T U R E S & B E N E F I T S
Lightweight materials optimized to provide the highest levels of protection and dexterity.
Over 50 styles for the right combination of cut, abrasion and puncture protection and comfort.
Durability & GripSpecialized coatings to repel liquids, improve durability and provide excellent grip in dry, wet or oily conditions.
Color IdentificationColor-coded overedge for easy size identification.
Fit & FlexibilitySeamless, form-fitting knit shells for an excellent fit with long-lasting flexibility.
Comfort & ProtectionKnit wrist cuffs for added comfort and protection.
ANSI Cut Level 2-5 ANSI Cut Level 2-4 ANSI Cut Level 0-1
CUT RESISTANT WORK GLOVES WITH
DUPONT™ KEVLAR®
Five times stronger
than steel, inherently flame resistant and offers excellent
cut protection.
PREMIUM CUT RESISTANT WORK GLOVES
Made using engineered yarns
and materials such as High Performance Polyethylene
(HPPE) and proprietary fibers such as Magid Durablend™.
MULTI-PURPOSE WORK GLOVES
Available in a variety
of styles for comfort, dexterity and grip for
general-purpose use.
ROC® is...R eliable protection.
Outstanding dexterity. C omfortable fit.
For jobs that require handling materials with sharp edges or rough surfaces, coated work gloves are a necessity. These gloves are proven to reduce hand injuries by as much as 60%.
There are many specialized gloves to protect workers’ hands from cuts or abrasions. These gloves are made using a variety of materials and thicknesses, each offering a different level of protection. Some use specialized coatings for added protection or grip when handling different materials, such as glass or metal. Use this guide to choose the right glove for each application.
High-Performance Polyethylene (HPPE)XX 15x stronger than steel
XX Resistant to chemicals, water and ultra-violet light
XX Low-linting
XX Soft material offers superior comfort
Para-Aramid/ Aramid FiberXX 5x stronger than steel
XX Inherently flame, heat and cut resistant
XX Available in different weights
DuraBlend™XX Long-lasting proprietary yarn blend
XX Delivers ANSI Level 2 Cut Resistance
1. Consider Cut Level and Application
ROC professional grade cut resistant gloves use different types of cut resistant materials, each with different benefits to consider.
2. Consider Materials and Their Characteristics
Selecting the Right Coated Work Glove
FR/Heat Resistant | Protects from flame and contact heat
Silicone-Free | Avoids contamination in painting applications
Touchscreen | Compatible with smartphones or touchscreen enabled tablets
Additional Selection Criteria
SILICONE ISO
SILICONE ISO
ANSI vs EN StandardTo make the right choice, you must understand the two common standards for defining levels of cut protection: ANSI and EN. There are some fundamental differences between the ANSI and EN standards, which include the rotation and pressure of the blade, as well as the general test methods. While they both show the different cut resistant properties of a material, there is no direct correlation between the two ratings other than the higher numbers indicating a greater level of cut protection.
*See more information on back folder.
X
X
ANSI Classification
Cut Level Cut Resistance (Grams) Application
< 200 gAssembly, Maintenance, Material Handling and Shipping and Receiving≥ 200 g and < 500 g
≥ 500 g and < 1000 g Assembly, Appliance Manufacturing, Automotive, Construction Maintenance, Material Handling and Metal Handling≥ 1000 g and < 1500 g
≥ 1500 g and < 3500 g Appliance Manufacturing, Automotive, Construction, Glass Handling, Machining, Metal Handling and Metal Stamping≥ 3500 g
0
1
2
3
4
5
Touch screen
Coatings affect a glove’s comfort, grip and dexterity. In the same way the application is important when choosing a shell material, consider the application when deciding which coating will work best.
3. Consider Coatings and Grip
4. Consider Comfort and Dexterity
• Thicker construction• Less dexterity
• Thinner construction• Improved dexterity
X
XConsider desired dexterity for the job.
LIMITED
LIMITED
LIMITED
LIMITED
LIMITED
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
GOOD
GOOD
GOOD
GOOD
GOOD
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
LIMITED EXCELLENTGOOD
Abrasion
Abrasion
NOT RECOMMENDED
Dexterity
Oil
Dexterity
Oil
X Soft and flexible coating offers best dexterity and tactile sensitivity
X Most popular palm coating choice based on comfort and grip
Polyurethane (PU) LIMITED
LIMITED
LIMITED
LIMITED
LIMITED
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
GOOD
GOOD
GOOD
GOOD
GOOD
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
LIMITED EXCELLENTGOOD
Abrasion
Abrasion
NOT RECOMMENDED
Dexterity
Oil
Dexterity
Oil
X Tough coating offers best abrasion and puncture resistance
X Stands up well against oil
Nitrile
LIMITED
LIMITED
LIMITED
LIMITED
LIMITED
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
GOOD
GOOD
GOOD
GOOD
GOOD
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
LIMITED EXCELLENTGOOD
Abrasion
Abrasion
NOT RECOMMENDED
Dexterity
Oil
Dexterity
Oil
X Foam texture improves non-slip grip when working with oils and liquids
X Excellent abrasion, puncture and snag resistance
Foam Nitrile
LIMITED
LIMITED
LIMITED
LIMITED
LIMITED
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
GOOD
GOOD
GOOD
GOOD
GOOD
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
LIMITED EXCELLENTGOOD
Abrasion
Abrasion
NOT RECOMMENDED
Dexterity
Oil
Dexterity
Oil
X Sandy texture improves non-slip grip when working with heavy oils and liquids
X Excellent abrasion, puncture, cut and snag resistance
X Excellent for oil
Sandy Nitrile
LIMITED
LIMITED
LIMITED
LIMITED
LIMITED
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
EXCELLENT
GOOD
GOOD
GOOD
GOOD
GOOD
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
Dexterity
Oil
Abrasion
LIMITED EXCELLENTGOOD
Abrasion
Abrasion
NOT RECOMMENDED
Dexterity
Oil
Dexterity
Oil
X Provides best overall dry grip of any coating
X Products containing latex may cause allergic reactions in some individuals
Latex
7 1810 13 15LOWER GAUGE
HEAVIER WEIGHT
HIGHER GAUGE
LIGHTER WEIGHT
Magid® D-ROC® premium line of cut-resistant work gloves are made using glass, steel and durable yarns.
XXANSI Cut Levels | 2-5XXMaterials | HPPE fiber blends, DuraBlend™XXCoatings | Polyurethane, Nitrix® sandy nitrile and micro-foam nitrileXXApplications | Material, metal and glass handling
Premium Cut-Resistant D-ROC® Work Gloves
Standard Grade GPD510
ANSIPuncture
5ANSI
Abrasion
6ANSICut
2
X HPPE fiber blendX 13-gauge
Ultra Grade GPD530
ANSIPuncture
4ANSI
Abrasion
6ANSICut
2
X HPPE fiber blendX 13-gauge
Extra Tough GPD546
ANSIPuncture
3ANSI
Abrasion
6ANSICut
2
X HPPE fiber blendX 13-gauge
Ultra-Lightweight GPD580
ANSIPuncture
3ANSI
Abrasion
4ANSICut
2
X HPPE fiber blendX 18-gauge
Long Wearing SD250
ANSIPuncture
4ANSI
Abrasion
6ANSICut
2
X HPPE fiber blendX 13-gauge
Advanced Comfort PF540
ANSIPuncture
3ANSI
Abrasion
2ANSICut
2
X HPPE fiber blendX 13-gauge
Conceals Dirt & Grime GPD520B
ANSIPuncture
2ANSI
Abrasion
4ANSICut
2
X DuraBlend™X 15-gauge
Most Comfortable CT500
ANSIPuncture
4ANSI
Abrasion
6ANSICut
2
X 100% HPPEX 15-gaugeX Available in multiple colors
Hi-Viz GPD525HV
ANSIPuncture
2ANSI
Abrasion
4ANSICut
2
X DuraBlend™X 15-gauge
Polyurethane Coating
Available in multiple colors Available in multiple colors
Gloves are categorized by coating and then by cut level within each coating.
800-444-8030 [email protected] magidglove.com
Conceals Dirt & Grime
Polyurethane Coating
Polyurethane Coating
SILICONE ISO
SILICONE ISO
Neither this nor any statement made by or on behalf of Magid Glove & Safety Mfg. Co. LLC herein is a warranty that any product is fit for a particular purpose,and Magid Glove & Safety Mfg. Co. LLC shall not be liable to anyone with respect to this information. Specifications are subject to change without notice.
Trademarks are the property of their respective owners.Printed in the U.S.A. ©2015 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved.FLYROCD Rev. 06/15
800-444-8030 [email protected] magidglove.com
Standard Grade GPD514
ANSIPuncture
5ANSI
Abrasion
5ANSICut
4
X HPPE blendX 13-gauge
Utra Grade GPD534
ANSIPuncture
3ANSI
Abrasion
6ANSICut
4
X HPPE fiber blendX 10-gauge
Extra Tough GPD590
ANSIPuncture
3ANSI
Abrasion
6ANSICut
4
X HPPE fiber blendX 10-gauge
Hi-Viz GPD545HV
ANSIPuncture
4ANSI
Abrasion
4ANSICut
4
X HPPE fiber blendX 13-gauge
Best-in-Class GPD800
ANSIPuncture
4ANSI
Abrasion
6ANSICut
5
X HPPE fiber blend with steel
X 13-gaugeX Flexible weight
Superior Grip GPD700
ANSIPuncture
4ANSI
Abrasion
6ANSICut
2
X HPPE fiber blendX 13-gauge
Full Protection GPD730
ANSIPuncture
4ANSI
Abrasion
6ANSICut
2
X 100% HPPEX 13-gauge
Superior Grip GPD780
ANSIPuncture
4ANSI
Abrasion
4ANSICut
4
X HPPE fiber blendX 10-gauge
Ultra-Lightweight GPD583
ANSIPuncture
4ANSI
Abrasion
4ANSICut
3
X HPPE fiber blendX 18-gauge
Full Protection GPD750
ANSIPuncture
4ANSI
Abrasion
6ANSICut
3
X HPPE fiber blendX 10-gauge
Hi-Viz GPD790HV
ANSIPuncture
5ANSI
Abrasion
5ANSICut
5
X HPPE fiber blend with steel
X 10-gauge
Conceals Dirt & Grime GP600W
ANSICut
2
X 100% polyester with acrylic fleece liner
X 7-gaugeX Insulated
Hi-Viz HV200W
ANSIPuncture
3ANSI
Abrasion
4ANSICut
2
X 100% polyester with acrylic fleece liner
X 13-gaugeX Insulated
Polyurethane Coating
Polyurethane Coating
Conceals Dirt & Grime
100% polyester with acrylic
Touch screen
Nitrix® Grip Sandy Nitrile Coating
Winter
Micro-Foam Nitrile Coating
Cut-Resistant K-ROC® WorkGloves with DuPont™ Kevlar®
Magid® K-ROC® cut-resistant gloves are made with specialized blends and durable DuPont™ Kevlar® that’s five times stronger than steel, is inherently flame resistant and offers excellent cut protection.
XXANSI Cut Levels | 2-4XXMaterials | Kevlar fiber blendsXXCoatings | Polyurethane, foam nitrile, rough nitrile and latexXXApplications | Material, metal and glass handling
Advanced Comfort KEV4326
ANSIAbrasion
4ANSICut
2
X Kevlar® blendX 13-gauge
Extra Tough KEV4327
ANSIPuncture
4ANSI
Abrasion
5ANSICut
2
X Kevlar® blendX 13-gauge
Super Strong KEV8627
ANSIPuncture
3ANSI
Abrasion
3ANSICut
4
X Kevlar® fiber blend with steel
X 13-gauge
Flexible Weight KEV4308
ANSIAbrasion
4ANSICut
1
X Kevlar® blendX 13-gauge
Superior Grip KEV4316
ANSIAbrasion
4ANSICut
2
X Kevlar® blendX 13-gauge
Super Strong KEV8616
ANSIPuncture
3ANSI
Abrasion
4ANSICut
4
X Kevlar® fiber blend with steel
X 13-gauge
Flexible Grip KEV4319
ANSIAbrasion
4ANSICut
2
X Kevlar® blendX 13-gauge
Best Dry Grip KEV6529
ANSIAbrasion
3ANSICut
3
X 100% Kevlar®X 10-gaugeX Heavy duty
Neither this nor any statement made by or on behalf of Magid Glove & Safety Mfg. Co. LLC herein is a warranty that any product is fit for a particular purpose,and Magid Glove & Safety Mfg. Co. LLC shall not be liable to anyone with respect to this information. Specifications are subject to change without notice.
Trademarks are the property of their respective owners.Printed in the U.S.A. ©2015 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved.FLYROCK Rev. 06/15
800-444-8030 [email protected] magidglove.com
Gloves are categorized by coating and then by cut level within each coating.
Polyurethane Coating
Rough Nitrile Coating
Foam Nitrile Coating Latex Coating
Magid® ROC® multi-purpose work gloves are available in dozens of styles with a variety of comfort, dexterity and grip combinations for general use.
XXANSI Cut Levels | 0-1XXMaterials | Nylon, polyester and spandex blendsXXCoatings | Polyurethane, nitrile, foam and micro-foam nitrile, Nitrix® sandy nitrile and latexXXApplications | General purpose
Multi-Purpose ROC® Work Gloves
Polyurethane Coating
Polyurethane Coating
Polyurethane Coating
Gloves are categorized by coating and then by cut level within each coating.
800-444-8030 [email protected] magidglove.com
SILICONE ISO
Standard GradeJDW150
ANSIPuncture
2ANSI
Abrasion
4ANSICut
0
X 100% polyesterX 13-gauge
Advanced Comfort PU50
ANSIAbrasion
2ANSICut
0
X 100% nylonX 15-gauge
Ultra-Lightweight GP180
ANSIAbrasion
3ANSICut
0
X 100% polyesterX 18-gauge
Standard Grade GP129
ANSIPuncture
2ANSI
Abrasion
3ANSICut
1X 100% polyesterX 13-gauge
Advanced Comfort GP150
ANSIPuncture
2ANSI
Abrasion
4ANSICut
1
X 100% nylonX 15-gauge
Conceals Dirt & Grime BP169
ANSIPuncture
2ANSI
Abrasion
4ANSICut
1
X 100% polyesterX 13-gauge
Conceals Dirt & Grime BP170
ANSIAbrasion
3ANSICut
1 X 100% nylonX 15-gauge
Standard Grade GP139
ANSIAbrasion
3ANSICut
1X 100% polyesterX 13-gauge
Standard Grade JPS2
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 13-gauge
SILICONE ISO SILICONE ISOSILICONE SILICONE
Neither this nor any statement made by or on behalf of Magid Glove & Safety Mfg. Co. LLC herein is a warranty that any product is fit for a particular purpose,and Magid Glove & Safety Mfg. Co. LLC shall not be liable to anyone with respect to this information. Specifications are subject to change without notice.
Trademarks are the property of their respective owners.Printed in the U.S.A. ©2015 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved.FLYROCR Rev. 06/15
800-444-8030 [email protected] magidglove.com
Advanced Comfort PU58
ANSIPuncture
2ANSI
Abrasion
3ANSICut
0
X 100% nylonX 15-gauge
Hi-Viz HV144
ANSIPuncture
2ANSI
Abrasion
2ANSICut
1
X 100% nylonX 13-gauge
Compliance Enhancing GP140
ANSIAbrasion
3ANSICut
1
X 100% nylonX 15-gauge
Touchscreen TOU-ROC
ANSIAbrasion
4ANSICut
1
X Nylon/polyester/copper blend
X 15-gauge
Advanced Comfort GP160
ANSIPuncture
2ANSI
Abrasion
4ANSICut
1
X 100% polyesterX 13-gauge
Hides Dirt GP161
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 13-gauge
Full Protection GP163
ANSIAbrasion
4ANSICut
1
X 100% nylonX 13-gauge
Advanced Comfort GP560
ANSIAbrasion
3ANSICut
1
X 100% polyesterX 13-gauge
Standard Grade GP561
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 13-gauge
Flexible Grip GP100
ANSIAbrasion
4ANSICut
1
X Nylon/spandex blendX 15-gauge
Hi-Viz HV100
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 15-gauge
Full Protection GP110
ANSIPuncture
2ANSI
Abrasion
4ANSICut
1
X Nylon/Spandex® blendX 13-gauge
Superior Grip GP500
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 13-gauge
Full Protection GP630
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 15-gauge
Best Dry Grip GP190
ANSIAbrasion
4ANSICut
1
X 100% polyesterX 13-gauge
Polyurethane Coating
Polyurethane Coating
Nitrile Coating Foam Nitrile Coating
Nitrile Coating
Latex CoatingNitrix® Grip Sandy Nitrile Coating
Micro-foam Nitrile Coating
Touch screen
Cut-ResistantGlove Comparison ChartGloves are categorized by coating and then by cut level within each coating.
Gauge Shell Color
Coating Color
Coating Area
ANSI Levels EN388 Cut Level
Sizes
Silicone Free
Cut
Abrasion
PunctureStyle # Shell Composition
Polyurethane Coating
GPD510 HPPE fiber blend 13 Salt & Pepper Grey Palm 2 6 3 5-12
GPD530 HPPE fiber blend 13 Salt & pepper Black Palm 2 6 4 3 6-12
GPD546 HPPE fiber blend 13 Salt & pepper Grey Palm 2 6 3 3 5-12 4
GPD580 HPPE fiber blend 18 Salt & pepper Black Palm 2 4 3 3 6-12
SD250 HPPE fiber blend 13 White Grey Palm 2 6 4 2 5-12 4
PF540 HPPE fiber blend 13 White White Palm 2 2 3 3 6-10
GPD520B DuraBlend™ 15 Black Black Palm 2 4 2 2 5-12
CT500 (ChromaTek®) 100% HPPE 15 Black, blue, red Black Palm 2 6 4 3 5-12
GPD525HV DuraBlend™ 15 Hi-viz yellow Hi-viz yellow Palm 2 4 2 3 5-12
GPD514 HPPE fiber blend 13 Salt & Pepper Grey Palm 4 5 5 5-12
GPD534 HPPE fiber blend 10 Salt & pepper Grey Palm 4 6 3 5 6-11
GPD590 HPPE fiber blend 10 Salt & pepper Grey Palm 4 6 3 5 4-12
GPD545HV HPPE fiber blend 13 Hi-viz yellow Hi-viz yellow Palm 4 4 4 5 5-12
GPD800 HPPE fiber blend with steel 13 Dark Grey Grey Palm 5 5 4 5 6-11
Micro-Foam Nitrile CoatingGPD583 HPPE fiber blend 18 Salt & pepper Black Palm 3 4 4 4 5-11
GPD750 HPPE fiber blend 10 White Green Full To Wrist 3 6 4 5 7-12
GPD790HV HPPE fiber blend with steel 10 Hi-viz yellow Hi-viz orange Palm 5 5 5 5 6-12
NitriX® Grip Technology Sandy Nitrile CoatingGPD700 HPPE fiber blend 13 Salt & pepper Black Palm 2 6 4 3 6-12
GPD730 (Double-dip) 100% HPPE 13 Salt & pepper Black Full 2 6 4 2 5-10
GPD780 HPPE fiber blend 10 Salt & pepper Black Palm 4 4 4 5 6-12
WinterGP600W (Double-dip) 100% Polyester with acrylic fleece liner 7 Black Black Palm 2 3 7-11
HV200W 100% Polyester with acrylic fleece liner 13 Hi-viz Yellow Black ¾ Dip 2 4 3 3 7-11
Gauge Shell Color
Coating Color
Coating Area
ANSI Levels EN388 Cut Level
Sizes
Silicone Free
Cut
Abrasion
PunctureStyle # Shell Composition
Polyurethane CoatingKEV4326 Kevlar® blend 13 Yellow Grey Palm 2 4 3 6-11
KEV4327 Kevlar® blend 13 Yellow Grey Palm 2 5 4 3 6-12
KEV8627 Kevlar® fiber blend with steel 13 Yellow Grey Palm 4 3 3 5 6-11
Rough Nitrile CoatingKEV4308 Kevlar® blend 13 Yellow Black Palm 1 4 2 6-10
KEV4316 Kevlar® blend 13 Yellow Black Palm 2 4 4 6-12
KEV8616 Kevlar® fiber blend with steel 13 Yellow Black Palm 4 4 3 5 7-12
Foam Nitrile CoatingKEV4319 Kevlar® blend 13 Yellow Grey Palm 2 4 4 6-11
Latex CoatingKEV6529 100% Kevlar® 10 Yellow Blue Palm 3 3 4 S-2XL
Appl
icati
ons G
uide
ANSI Cut Level 1 Assembly, Maintenance, Material Handling, Shipping & Receiving
ANSI Cut Level 2 & 3 Assembly, Appliance Manufacturing, Automotive, Construction Maintenance, Material Handling and Metal Handling
ANSI Cut Level 4 & 5 Appliance Manufacturing, Automotive, Construction, Glass Handling, Machining, Metal Handling and Metal Stamping
Approved PPG Coated Glass Products
GP150, GPD530, GPD534, GPD580, SD250, GPD546, GPD590, CT500, GPD700,GPD730, GPD790HV, KEV8627, KEV8616, KEV4319 and KEV6529
Silicone Free Gloves Aerospace and Painting applications typically require silicone-free gloves
General PurposeGlove Comparison Chart
Neither this nor any statement made by or on behalf of Magid Glove & Safety Mfg. Co. LLC herein is a warranty that any product is fit for a particular purpose,and Magid Glove & Safety Mfg. Co. LLC shall not be liable to anyone with respect to this information. Specifications are subject to change without notice.
Trademarks are the property of their respective owners.Printed in the U.S.A. ©2015 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved.FLYROCK Rev. 06/15
800-444-8030 [email protected] magidglove.com
Gloves are categorized by coating and then by cut level within each coating.
Gauge Shell Color
Coating Color
Coating Area
ANSI Levels EN388 Cut Level
Sizes
Silicone Free
Cut
Abrasion
PunctureStyle # Shell Composition
Polyurethane CoatingJDW150 100% polyester 13 Grey Grey Palm 0 4 2 6-11
PU50 100% nylon 15 White White Palm 0 3 2 6-11
GP180 100% polyester 18 Black Black Palm 0 3 5-12
GP129 100% polyester 13 Grey Black Palm 1 3 2 5-11
GP150 100% nylon 15 Grey Grey Palm 1 4 2 5-11 4
BP169 100% polyester 13 Black Black Palm 1 4 2 5-11
BP170 100% nylon 15 Black Black Palm 1 3 7-11
GP139 100% polyester 13 White Grey Palm 1 3 6-11
JPS2 100% polyester 13 White White Palm 1 4 6-11
PU58 100% nylon 15 White White Fingertip 1 2 6-9
HV144 100% nylon 13 Hi-viz yellow Hi-viz orange Palm 1 2 2 6-11
GP140 100% nylon 15 Orange Grey Palm 1 3 5-11
TOU-ROC (Touchscreen) Nylon & polyester with elemental copper blend 15 Tan Black Palm 1 4 S-XL
Nitrile CoatingGP160 100% polyester 13 White Grey Palm 1 4 2 6-11
GP161 100% polyester 13 Black Black Palm 1 4 6-11
GP163 100% nylon 13 White Grey Full 1 4 7-10
Foam Nitrile CoatingGP560 100% polyester 13 White Grey Palm 1 3 6-11
GP561 100% polyester 13 White Grey Palm 1 4 6-11
Micro-Foam Nitrile CoatingGP100 Nylon & spandex blend 15 Grey Black Palm 1 4 6-12 4
HV100 100% polyester 15 Hi-viz yellow Hi-viz yellow Palm 1 4 6-11 4
GP110 Nylon & spandex blend 13 Grey Black Full 1 4 2 6-11
NitriX® Grip Technology Sandy Nitrile CoatingGP500 100% polyester 13 Grey Black Palm 1 4 6-11
GP630 (Double-dip) 100% polyester 15 Grey Black Full 1 4 6-11
Latex CoatingGP190 100% polyester 13 Grey Black Palm 1 4 6-11
Is there a glove you’d like to sample?Need more help identifying the right glove for an application?
Contact a Magid safety specialist today.Call 800-444-8030 or email [email protected]
ANSI Classifications
Cut Resistance
Level
Weight (grams) needed to cut through material
(25 mm of blade travel - ASTM F1790-97)(20 mm of blade travel - ASTM F1790-05)
< 200
≥ 200
≥ 500
≥ 1000
≥ 1500
≥ 3500
ASTM F1790-97 & ASTM F1790-05 test standards*
EN388 Classifications
Test Level 1
Level 2
Level 3
Level 4
Level 5
6.1 Abrasion resistance (number of cycles) 100 500 2000 8000 —
6.2 Blade cut resistance (index) 1,2 2,5 5,0 10,0 20,0
6.3 Tear resistance (N) 10 25 50 75 —
6.4 Puncture resistance (N) 20 60 100 150 —
EN 388:2003 test standard**
Abrasion Resistance
Level (tested at 500 g load) Abrasion cycles to fail
< 100
≥ 100
≥ 500
≥ 1000
Level (tested at 1000 g load)
≥ 3000
≥ 10000
≥ 20000
ASTM D3389-05 test standard*
Puncture Resistance
Level Puncture (Newtons)
< 10
≥ 10
≥ 20
≥ 60
≥ 100
≥ 150
EN 388:2003 test method*
Sources:* International Safety Equipment Association’s American National Standard for Hand Protection Selection Criteria. ** British Standards Institution.
Protection ClassificationsBelow are accepted industry standards for cut, abrasion and puncture resistance. When choosing a glove, safety managers and end-users must determine the acceptable levels of protection and performance required for the job. Other factors include worker comfort, dexterity, coatings and cost.
0 0
0
1 1
1
2 2
2
3 3
3
4 44
5 55
6
Neither this nor any statement made by or on behalf of Magid Glove & Safety Mfg. Co. LLC herein is a warranty that any product is fit for a particular purpose, and Magid Glove & Safety Mfg. Co. LLC shall not be liable to anyone with respect to this information. Specifications are subject to change without notice.
Trademarks are the property of their respective owners.Printed in the U.S.A. ©2015 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved.FLYROCFOL Rev. 06/15
800-444-8030 [email protected] magidglove.com
Headquartered in Romeoville, IL, Magid is a leading manufacturer, importer, distributor and direct supplier ofpersonal protective equipment (PPE) and value-added services for the industrial and consumer markets. Magidsafety solutions address customer challenges including compliance, accident prevention, cost containment andinventory management. A valued partner in safety to thousands of companies since 1946, Magid offers 700 ofsafety’s leading brands including its own signature Magid branded products along with 3M™, Ansell®, DuPont™,Honeywell, Carhartt®, MAPA®, MSA, Showa and many more.
Safety at work ™