www.wmtr-messtechnik.de

Compact · High Performance · Micro Precise

TC-210OPTICAL MEASURING TECHNOLOGY IN PERFECTION

This is how precision works.

WERKZEUG-MESSTECHNIK RITTER

W M T R

WERKZEUG-MESSTECHNIK RITTER

W M T R Werkzeug-Messtechnik RitterOb dem Beurental 40 · 72469 Meßstetten/GermanyPhone +49 172 7414380 · info@wmtr-messtechnik.dewww.wmtr-messtechnik.de

The TC-210 is excellently suited for incoming goods inspection, tool repair, production and final inspection. The best solution for general tool measurement of drills, milling cutters and reamers. The TC-210 measuring instrument combines ergonomic design with modular and low-maintenance components with excellent technology.

This highly accurate Measuring System is designed for the rapid and simple non-contact measuring of any kind of Cutting Tools with Cylindrical Shank, MT or even HSK. User-friendly, sophisticated and precise. Any kind of cutting geometries, step lengths and radii of precision tools made from PCD, CBN, Carbide or HSS can be measured with the use of the high-resolution camera, zoom lens and user friendly software from IPM.

The new TC-210 is ideal in the areas of material control, tool repair, production and final inspection. Tools up to a Diameter of 80 mm can be measured with the Measuring System TC-210. There are several different prism accessories and indexing units available. The new Measuring System IPM TC-210 combines ergonomic design with modular, low-maintenance components and excellent technology.

YOUR ADVANTAGES: PERFECT FOR THE MEASURING OF:

> Front angles> Step angles> Step lengths> 1st and 2nd cutting angle> Clearance angles> Circular grinding angles> Front and peripherical geometry> Drill point thinning> Dead center > Coolant channels> Flute spacing> Different cutting geometries, i.e. double land, 4-facet grinding etc.> Cutting angle> Countours measuring via dxf-files

> Modular system

> Fast image processing

> Fast and precise adjustment

> Manual fine adjustment of all axes

> Measure any cutting geometries

> No damage to the blades

> Precise measurement results

> Can be used directly in the production facility

> User-friendly software

> Resolution 0.001 mm

> Switch from mm to inch

> Switch from radius to diameter

> Data halving

> Calculated Ads

> Various adaptive recording possibilities of the tools

> Many special software modules

TC-210This is how precision works.

Schmeißer WerkzeugmaschinenLochfelbenstraße 2 · 89312 Günzburg/GermanyPhone +49 8221 368 96 30 · Fax +49 8221 368 96 32info@schmeisser.de · www.schmeisser.de

The TC-210 is excellently suited for incoming goods inspection, tool repair, production and final inspection. The best solution for general tool measurement of drills, milling cutters and reamers. The TC-210 measuring instrument combines ergonomic design with modular and low-maintenance components with excellent technology.

This highly accurate Measuring System is designed for the rapid and simple non-contact measuring of any kind of Cutting Tools with Cylindrical Shank, MT or even HSK. User-friendly, sophisticated and precise. Any kind of cutting geometries, step lengths and radii of precision tools made from PCD, CBN, Carbide or HSS can be measured with the use of the high-resolution camera, zoom lens and user friendly software from IPM.

The new TC-210 is ideal in the areas of material control, tool repair, production and final inspection. Tools up to a Diameter of 80 mm can be measured with the Measuring System TC-210. There are several different prism accessories and indexing units available. The new Measuring System IPM TC-210 combines ergonomic design with modular, low-maintenance components and excellent technology.

YOUR ADVANTAGES: PERFECT FOR THE MEASURING OF:

> Front angles> Step angles> Step lengths> 1st and 2nd cutting angle> Clearance angles> Circular grinding angles> Front and peripherical geometry> Drill point thinning> Dead center > Coolant channels> Flute spacing> Different cutting geometries, i.e. double land, 4-facet grinding etc.> Cutting angle> Countours measuring via dxf-files

> Modular system

> Fast image processing

> Fast and precise adjustment

> Manual fine adjustment of all axes

> Measure any cutting geometries

> No damage to the blades

> Precise measurement results

> Can be used directly in the production facility

> User-friendly software

> Resolution 0.001 mm

> Switch from mm to inch

> Switch from radius to diameter

> Data halving

> Calculated Ads

> Various adaptive recording possibilities of the tools

> Many special software modules

TC-210This is how precision works.