wolf atex led torch tr-40 range - onceguvenlik · 2014. 3. 5. · e-mail: [email protected]...

2
1180 ATEX and IECEx certified for explosive gas and dust atmospheres LED light source ‘fitted for life’, no bulb replacement required High output focussed spot beam with flood of lower level fringe light Over 7.5 hours high power output from 4 x AA alkaline primary cells Compact and lightweight torch design Low battery indicator fitted on TR-40+ model Zone 0 version available All models with Group I Mining Approval WOLF ATEX LED TORCH TR-40 RANGE 60mm 80mm 195mm Wolf ATEX LED Torch TR-40 Range 1.4W LED beam (approx 6°) Peak luminous intensity at 5m, 550lux TR-40/TR-40+ TR-45

Upload: others

Post on 13-Sep-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: WOLF ATEX LED TORCH TR-40 RANGE - Onceguvenlik · 2014. 3. 5. · E-mail: info@wolf-safety.co.uk Website: SL016 issue 04 Wolf ATEX LED Torch TR-40 Range Technical Specification Product

1180

ATEX and IECEx certified

for explosive gas and dust

atmospheres

LED light source ‘fitted for

life’, no bulb replacement

required

High output focussed spot

beam with flood of lower level

fringe light

Over 7.5 hours high power

output from 4 x AA alkaline

primary cells

Compact and lightweight

torch design

Low battery indicator fitted

on TR-40+ model

Zone 0 version available

All models with Group I

Mining Approval

WOLF ATEX LED TORCH TR-40 RANGE

60mm

80mm

195mm

Wolf ATEX LED Torch TR-40 Range

1.4W LED beam (approx 6°)Peak luminous intensity at 5m, 550lux

TR-40/TR-40+TR-45

Page 2: WOLF ATEX LED TORCH TR-40 RANGE - Onceguvenlik · 2014. 3. 5. · E-mail: info@wolf-safety.co.uk Website: SL016 issue 04 Wolf ATEX LED Torch TR-40 Range Technical Specification Product

The high-tech Wolf ATEX LED Torch TR-40 range uses the latestLED technology to give excellentperformance and reliability in the most extreme conditions.

The Wolf ATEX LED Torch is CEmarked to the 94/9/EC ATEXDirective and certified to the IECExScheme, with versions allowing usein M1 and M2 mining applicationsas well as Zones 0, 1 and 2potentially explosive gas, vapour,mist and dust atmospheres, with T4 or T3 temperature classdependent on cell type used.

The compact and lightweight right-angle torch design has a high-gripergonomic form with easy singlehanded switching, even with glovedhands. The high strength torch body

has proven impact resistance at sub zero temperatures. The rubberarmoured lens ring and end capgive enhanced grip and shockprotection. The lens is resistant to scratch and chemical attack. The torch is sealed dust tight andprotected from water immersion,with a certified IP67 enclosure. The right-angle body arrangementincorporates a replaceable highstrength thermoplastic belt clip for hands free use.

The TR-40, TR-40+ and TR-45 giveoutstanding light output from uniqueoptics that deliver a piercing spotbeam, combined with a flood oflower level fringe light, giving a peakof 50 lumens light output from ahigh power Luxeon LED. The lightsource has a 25,000 hour life and

should be regarded as ‘fitted forlife’. Powered by four AA/LR6primary alkaline cells fitted in acassette, Wolf ATEX LED Torchesprovide over 7.5 hours of light at full brightness, and thereafter atreducing brightness for up to 72hours of total light output. The TR-40+ model is fitted with a lowbattery power indicator, emitting ared flashing light through the side of the torch body while batterypower is high, but switching tocontinuous red to show low batterypower when only a short period offull brightness light output remains.

Very low maintenance and quickcomponent replacement are keybenefits of this product range. All models are supplied with wrist straps and clip rings.

WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: [email protected] Website: www.wolf-safety.co.ukSL016 issue 04

Wolf ATEX LED Torch TR-40 RangeTechnical Specification

Product reference TR-40 TR-40+ TR-45

Description High Power LED right angle safety torchYellow Body - Zone 1 Yellow Body - Zone 1 Black Body - Zone 0

+ low battery indicatorCode Industrial II 2 GD Ex ib IIC T4/T3 tD A21 IP67 T85°C II 1 G Ex ia IIC

T4/T3 IP67Mining I M2 Ex ib I IP67 I M1 Ex ia I IP67

Type of protection ‘ia/ib’ Intrinsic Safety, ‘tD’ Enclosure ProtectionArea of classification (Gases) Zones 1 & 2 Zones 0, 1 & 2

gas groups IIA, IIB, IIC gas groups IIA, IIB, IICTemp. classification (Gases) T4/T3Area of classification (Dust) Zones 21 and 22 –Max surface temp. (Dusts) 85°C –Ambient Temperature -20°C to +40°CCertificate Baseefa07ATEX0091

IECEx BAS 06.0089Enclosure Material High impact thermoplastic, chemical resistant, electrostatic non-hazardousLens Shatterproof polycarbonate with scratch and chemical Toughened glass

resistant hardcoatBeam type High output beam with focussed spot with wide angle fringe of lightLight source: Type High power LED

Power 1.4 WattsOutput up to 145 lmBulb Life 25,000 hrs plus (fitted for life)

Power Supply: Pt. no. TP-295 (4 x LR6 Cells)Cell Type LR6 primary cells to IEC60086, Alkaline AA cellsVolts 4 x 1.5V

Low Battery Indicator – Yes –Light duration Up to 7.5 hours at full brightness, up to 72 hours total light durationIngress protection IP67Weight (incl. cells) 0.350 Kg

Note: all information has been gathered under laboratory conditions, the user must regard the values given as approximate.