workholding devices and clamping elements clamps...
TRANSCRIPT
WORKHOLDING DEVICES AND CLAMPING ELEMENTS
USC-12(a)USC-12(b)USC-16(a)USC-16(b)USC-20(a)USC-20(b)USC-24(a)USC-24(b)
1214161820222428
0-60 0-60 0-80 0-80
0-100 0-100 0-120 0-120
MODELSUITABLE FOR T-SLOT SIZE
CLAMPING RANGE
UNIVERSAL STRAP CLAMP
For power presses, milling, drilling, shaping and boring. Supplied complete with
T-Bolt, Nut etc.
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied complete with T-Bolt or Stud and Nut etc.
MOULD CLAMP - WITH CLAMPING STUD
MC-12MC-16MC-20MC-24
0-350-400-500-60
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
HEIGHTRANGE
MOULD CLAMP - WITH T- BOLT
MC-12(a)MC-12(b)MC-16(a)MC-16(b)MC-20(a)MC-20(b)MC-24(a)MC-24(b)
1214161820222428
0-35 0-35 0-40 0-40 0-50 0-50 0-60 0-60
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP
TAPPED END CLAMP WITH ADJUSTABLE SUPPORT
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied only with threaded support.
TTUC-12TTUC-16TTUC-20TTUC-24
M-12M-16M-20M-24
SUITABLE FOR BOLTMODEL
110125160200
LENGTH
LOW HEIGHT PINCH CLAMP
For side clamping on VMC, milling, shaping, planning, jig boring etc.
MODEL
PC-1(a)PC-1(b)PC-2PC-3PC-4(a)PC-4(b)PC-5(a)PC-5(b)
1214161820222428
SUITABLE FOR T-SLOT SIZE
1515181824242424
CLAMP THICKNESS
TOTALLENGTH
115115145145180180180180
HEAVY DUTY PINCH CLAMP
For side clamping of thicker plates on VMC, milling, planning, plano-milling etc.
MODELSUITABLE FOR
T-SLOT SIZE
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)HDPC-3
1820222428
CLAMPTHICKNESS
3838383838
185185185185185
TOTALLENGTH
FORGED STRAP CLAMP WITH TAPPED END
Most suitable for mould clamping on Plastic Injection Moulding Machine.
Forged, Hardened & Tempered
TTFC -16 M-16
MODELSUITABLE FOR BOLT
152
TOTAL LENGTH
M -16
TAPPED END
Also available as Model TTFC-16S with threaded support TS-16 (M-16X70 Long).
'TOOLFAST' mould clamp is now available in forged steel body for extra strength.
MOULD CLAMP - WITH CLAMPING STUD
MCF-12MCF-16MCF-20MCF-24
0-350-500-650-75
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
RANGE
MOULD CLAMP - WITH T- BOLT
MCF-12(a)MCF-12(b)MCF-16(a)MCF-16(b)MCF-20(a)MCF-20(b)MCF-24(a)MCF-24(b)
1214161820222428
0-35 0-35 0-50 0-50 0-65 0-65 0-75 0-75
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP - FORGED
COMPACT MILLING CLAMP
The most multi-purpose, quick and easy to use down-hold milling clamp.
MODEL
CMC-12CMC-14CMC-16CMC-18
0-1250-1250-1250-125
CLAMPING HEIGHT RANGE
12141618
SUITABLE FOR
T-SLOT SIZE
1600kgs.1600kgs.1600kgs.1600kgs.
HEIGHT BLOCK FOR CMC CLAMP :
By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block modelHB-CMC-75 increases clamping height range by 75mm.
Height Block HB-CMC-75
ST-PC-1AST-PC-1BST-PC-2ST-PC-3ST-PC-4AST-PC-4BST-PC-5AST-PC-5BST-HDPC-1AST-HDPC-1BST-HDPC-2AST-HDPC-2BST-HDPC-3
15151818242424243838383838
THICKNESSMODELSUITABLE
FOR PINCH CLAMP MODEL
PC-1(a)PC-1(b)
PC-2PC-3
PC-4(a)PC-4(b)PC-5(a)PC-5(b)
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)
HDPC-3
STOP FOR PINCH CLAMPS
PCS-1APCS-1BPCS-2PCS-3
12141618
55556666959595959595959595
TOTAL LENGTH
LOW HEIGHT PINCH CLAMP AND STOP WITH STEP
Stop For Above Pinch Clamp With Step
Low Height Pinch Clamp With Step
Stop or Stopper block to be mounted on the opposite side of workpiece while clamping with PC Series or HDPC series pinch clamps.
This is a new version of low height pinch clamp (PC Series) having step to support the workpiece above the machine table for through milling and drilling.
MINI PINCH CLAMP
For side clamping of thin plates on VMC, milling, shaping & planning.
MPC-1MPC-2MPC-3
141618
MODEL SUITABLE FOR T-SLOT SIZE
MODE
4
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
MODEL
ADJUSTABLE SUPPORT PLATES
TASP-250
TASP-2100
TASP-2150
TASP-L-250
TASP-L-2100
TASP-L-2150
50
100
150
50
100
150
MAXIMUM HEIGHT
For clamp support.
25 X 35
25 X 35
25 X 35
35 X 50
35 X 50
35 X 50
CLAMP RESTAREA
2
2
2
2
2
2
PLATETHICKNESS
THREADED SUPPORT FOR TAPPED END CLAMPS
These have large resting base and hexagon at bottom for
height adjustment.
STRAP CLAMP - FORGED BODY
M-12
M-16
M-20
M-24
120
140
180
220
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TSCF-12TSCF-16TSCF-20TSCF-24
Hardened & tempered, tapped end.
GOOSE NECK CLAMP- FORGED - TAPPED END
TGNCF-16TGNCF-20TGNCF-24
M-16M-20M-24
125165200
MODEL SUITABLE FOR BOLT LENGTH
PLAIN CLAMP
M-12
M-16
70
90
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TES-12TES-16
Hardened & Tempered
These are economy models of strap clamps. Can be used where simple shape of a plain strap can serve the purpose.
U - CLAMP Hardened & Tempered, black nish based on IS:4293
MODEL SUITABLE FOR BOLT LENGTH
TUC-12-160TUC-16-200TUC-20-250TUC-24-250
M-12M-16M-20M-24
160200250250
FINGER STRAP CLAMP
TCF -16 M-16
MODEL SUITABLE FOR BOLT
152
TOTAL LENGTH
Hardened & Tempered
TS-12TS-16TS-20TS-24
M-12 x 1.75 PM-16 x 2.0 PM-20 x 2.5 PM-24 x 3.0 P
60708085
30354050
DIA AT BOTTOM
THREAD SIZE
OVERALL LENGTH
MODEL
LEVELLING JACK - HEAVY DUTY
LEVELLING JACKS & HEIGHT BLOCKS
LEVELLING JACK
LJ-HD 160 230 FLAT 50Ø
MODELMIN.
HEIGHTMAX.
HEIGHTTYPE OF
TOP FACE
HEIGHT BLOCK FOR LEVELLING JACK
HBLJ-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
HIGHT BLOCK FOR LEVELLING JACK - HEAVY DUTY
HBLJ-HD-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
32Ø
SCREWTHREAD
LEVELLING JACK - HEAVY DUTY FLANGE MOUNTING
LJ-HD-FB 160 230 FLAT 50Ø
MODEL MIN.
HEIGHT MAX.
HEIGHTTYPE OF
TOP FACE
32Ø
SCREWTHREAD
MODEL
STEP BLOCKS
STEP BLOCK
TSB-1L
TSB-1
TSB-2L
TSB-2
TSB-3L
TSB-3
24
30
24
30
24
30
20
20
40
40
60
60
44
44
100
100
155
155
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
MODEL
STEP BLOCK - HEAVY DUTY
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
THSB-5THSB-6
4848
4072
100180
For clamp support.
MODEL
LJ-1(a)LJ-1(b)LJ-2LJ-3
75100120105
100150170155
FLAT 38ØFLAT 38ØCONICAL
‘V’
M-24M-24M-24M-24
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
5.05.05.05.0
MAX.LOAD TONS
8.0
MAX.LOAD TONS
8.0
CAM CLAMP Hold Down Type
Most ideal for quick Hold Down Clamping in fixtures. Conventional Strap Clamps in
fixtures can be replaced by these quick acting Cam clamps without much effort.
These clamps have high clamping force suitable for machining fixtures.
MODEL CLAMPING BOLT HOLDING CAPACITY
TCC-10
TCC-12
M-10
M-12
1400 Kgs.
2000 Kgs.
2D / 3D CAD files available on request
SCREW JACK - HEAVY DUTY
MODEL
SJ-HD-1SJ-HD-2
250380
400660
FLAT 75ØFLAT 75Ø
40Ø40Ø
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
2525
5
HEIGHT
SUITABLE FOR T-SLOT SIZE
CLAMPING FORCE
STRAP CLAMP Hardened & tempered, Black Finish based on IS:4292
MODEL
TSC-8-60 M-8 60TSC-10-80 M-10 80TSC-12-100 M-12 100TSC-12-125 M-12 125TSC-14-125 M-14 125TSC-16-125 M-16 125TSC-16-160 M-16 160TSC-20-160 M-20 160
TSC-24-200 M-24 200
TSC-30-250 M-30 250
SUITABLE FOR BOLT LENGTH
TSC-20-200 M-20 200
TSC-24-250 M-24 250
STEPPED STRAP CLAMP Hardened & Tempered, Black Finish
To be used with step block.
TSSC-12-65TSSC-12-100TSSC-12-125TSSC-16-75TSSC-16-125TSSC-16-160TSSC-20-160TSSC-24-200
M-12M-12M-12M-16M-16M-16M-20M-24
6510012575
125160160200
MODEL SUITABLE FOR BOLT LENGTH
TSSC-10-120 M-10 120TSSC-10-80 M-10 80TSSC-10-60 M-10 60
WORKHOLDING DEVICES AND CLAMPING ELEMENTS
USC-12(a)USC-12(b)USC-16(a)USC-16(b)USC-20(a)USC-20(b)USC-24(a)USC-24(b)
1214161820222428
0-60 0-60 0-80 0-80
0-100 0-100 0-120 0-120
MODELSUITABLE FOR T-SLOT SIZE
CLAMPING RANGE
UNIVERSAL STRAP CLAMP
For power presses, milling, drilling, shaping and boring. Supplied complete with
T-Bolt, Nut etc.
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied complete with T-Bolt or Stud and Nut etc.
MOULD CLAMP - WITH CLAMPING STUD
MC-12MC-16MC-20MC-24
0-350-400-500-60
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
HEIGHTRANGE
MOULD CLAMP - WITH T- BOLT
MC-12(a)MC-12(b)MC-16(a)MC-16(b)MC-20(a)MC-20(b)MC-24(a)MC-24(b)
1214161820222428
0-35 0-35 0-40 0-40 0-50 0-50 0-60 0-60
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP
TAPPED END CLAMP WITH ADJUSTABLE SUPPORT
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied only with threaded support.
TTUC-12TTUC-16TTUC-20TTUC-24
M-12M-16M-20M-24
SUITABLE FOR BOLTMODEL
110125160200
LENGTH
LOW HEIGHT PINCH CLAMP
For side clamping on VMC, milling, shaping, planning, jig boring etc.
MODEL
PC-1(a)PC-1(b)PC-2PC-3PC-4(a)PC-4(b)PC-5(a)PC-5(b)
1214161820222428
SUITABLE FOR T-SLOT SIZE
1515181824242424
CLAMP THICKNESS
TOTALLENGTH
115115145145180180180180
HEAVY DUTY PINCH CLAMP
For side clamping of thicker plates on VMC, milling, planning, plano-milling etc.
MODELSUITABLE FOR
T-SLOT SIZE
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)HDPC-3
1820222428
CLAMPTHICKNESS
3838383838
185185185185185
TOTALLENGTH
FORGED STRAP CLAMP WITH TAPPED END
Most suitable for mould clamping on Plastic Injection Moulding Machine.
Forged, Hardened & Tempered
TTFC -16 M-16
MODELSUITABLE FOR BOLT
152
TOTAL LENGTH
M -16
TAPPED END
Also available as Model TTFC-16S with threaded support TS-16 (M-16X70 Long).
'TOOLFAST' mould clamp is now available in forged steel body for extra strength.
MOULD CLAMP - WITH CLAMPING STUD
MCF-12MCF-16MCF-20MCF-24
0-350-500-650-75
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
RANGE
MOULD CLAMP - WITH T- BOLT
MCF-12(a)MCF-12(b)MCF-16(a)MCF-16(b)MCF-20(a)MCF-20(b)MCF-24(a)MCF-24(b)
1214161820222428
0-35 0-35 0-50 0-50 0-65 0-65 0-75 0-75
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP - FORGED
COMPACT MILLING CLAMP
The most multi-purpose, quick and easy to use down-hold milling clamp.
MODEL
CMC-12CMC-14CMC-16CMC-18
0-1250-1250-1250-125
CLAMPING HEIGHT RANGE
12141618
SUITABLE FOR
T-SLOT SIZE
1600kgs.1600kgs.1600kgs.1600kgs.
HEIGHT BLOCK FOR CMC CLAMP :
By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block modelHB-CMC-75 increases clamping height range by 75mm.
Height Block HB-CMC-75
ST-PC-1AST-PC-1BST-PC-2ST-PC-3ST-PC-4AST-PC-4BST-PC-5AST-PC-5BST-HDPC-1AST-HDPC-1BST-HDPC-2AST-HDPC-2BST-HDPC-3
15151818242424243838383838
THICKNESSMODELSUITABLE
FOR PINCH CLAMP MODEL
PC-1(a)PC-1(b)
PC-2PC-3
PC-4(a)PC-4(b)PC-5(a)PC-5(b)
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)
HDPC-3
STOP FOR PINCH CLAMPS
PCS-1APCS-1BPCS-2PCS-3
12141618
55556666959595959595959595
TOTAL LENGTH
LOW HEIGHT PINCH CLAMP AND STOP WITH STEP
Stop For Above Pinch Clamp With Step
Low Height Pinch Clamp With Step
Stop or Stopper block to be mounted on the opposite side of workpiece while clamping with PC Series or HDPC series pinch clamps.
This is a new version of low height pinch clamp (PC Series) having step to support the workpiece above the machine table for through milling and drilling.
MINI PINCH CLAMP
For side clamping of thin plates on VMC, milling, shaping & planning.
MPC-1MPC-2MPC-3
141618
MODEL SUITABLE FOR T-SLOT SIZE
MODE
4
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
MODEL
ADJUSTABLE SUPPORT PLATES
TASP-250
TASP-2100
TASP-2150
TASP-L-250
TASP-L-2100
TASP-L-2150
50
100
150
50
100
150
MAXIMUM HEIGHT
For clamp support.
25 X 35
25 X 35
25 X 35
35 X 50
35 X 50
35 X 50
CLAMP RESTAREA
2
2
2
2
2
2
PLATETHICKNESS
THREADED SUPPORT FOR TAPPED END CLAMPS
These have large resting base and hexagon at bottom for
height adjustment.
STRAP CLAMP - FORGED BODY
M-12
M-16
M-20
M-24
120
140
180
220
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TSCF-12TSCF-16TSCF-20TSCF-24
Hardened & tempered, tapped end.
GOOSE NECK CLAMP- FORGED - TAPPED END
TGNCF-16TGNCF-20TGNCF-24
M-16M-20M-24
125165200
MODEL SUITABLE FOR BOLT LENGTH
PLAIN CLAMP
M-12
M-16
70
90
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TES-12TES-16
Hardened & Tempered
These are economy models of strap clamps. Can be used where simple shape of a plain strap can serve the purpose.
U - CLAMP Hardened & Tempered, black nish based on IS:4293
MODEL SUITABLE FOR BOLT LENGTH
TUC-12-160TUC-16-200TUC-20-250TUC-24-250
M-12M-16M-20M-24
160200250250
FINGER STRAP CLAMP
TCF -16 M-16
MODEL SUITABLE FOR BOLT
152
TOTAL LENGTH
Hardened & Tempered
TS-12TS-16TS-20TS-24
M-12 x 1.75 PM-16 x 2.0 PM-20 x 2.5 PM-24 x 3.0 P
60708085
30354050
DIA AT BOTTOM
THREAD SIZE
OVERALL LENGTH
MODEL
LEVELLING JACK - HEAVY DUTY
LEVELLING JACKS & HEIGHT BLOCKS
LEVELLING JACK
LJ-HD 160 230 FLAT 50Ø
MODELMIN.
HEIGHTMAX.
HEIGHTTYPE OF
TOP FACE
HEIGHT BLOCK FOR LEVELLING JACK
HBLJ-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
HIGHT BLOCK FOR LEVELLING JACK - HEAVY DUTY
HBLJ-HD-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
32Ø
SCREWTHREAD
LEVELLING JACK - HEAVY DUTY FLANGE MOUNTING
LJ-HD-FB 160 230 FLAT 50Ø
MODEL MIN.
HEIGHT MAX.
HEIGHTTYPE OF
TOP FACE
32Ø
SCREWTHREAD
MODEL
STEP BLOCKS
STEP BLOCK
TSB-1L
TSB-1
TSB-2L
TSB-2
TSB-3L
TSB-3
24
30
24
30
24
30
20
20
40
40
60
60
44
44
100
100
155
155
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
MODEL
STEP BLOCK - HEAVY DUTY
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
THSB-5THSB-6
4848
4072
100180
For clamp support.
MODEL
LJ-1(a)LJ-1(b)LJ-2LJ-3
75100120105
100150170155
FLAT 38ØFLAT 38ØCONICAL
‘V’
M-24M-24M-24M-24
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
5.05.05.05.0
MAX.LOAD TONS
8.0
MAX.LOAD TONS
8.0
CAM CLAMP Hold Down Type
Most ideal for quick Hold Down Clamping in fixtures. Conventional Strap Clamps in
fixtures can be replaced by these quick acting Cam clamps without much effort.
These clamps have high clamping force suitable for machining fixtures.
MODEL CLAMPING BOLT HOLDING CAPACITY
TCC-10
TCC-12
M-10
M-12
1400 Kgs.
2000 Kgs.
2D / 3D CAD files available on request
SCREW JACK - HEAVY DUTY
MODEL
SJ-HD-1SJ-HD-2
250380
400660
FLAT 75ØFLAT 75Ø
40Ø40Ø
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
2525
5
HEIGHT
SUITABLE FOR T-SLOT SIZE
CLAMPING FORCE
STRAP CLAMP Hardened & tempered, Black Finish based on IS:4292
MODEL
TSC-8-60 M-8 60TSC-10-80 M-10 80TSC-12-100 M-12 100TSC-12-125 M-12 125TSC-14-125 M-14 125TSC-16-125 M-16 125TSC-16-160 M-16 160TSC-20-160 M-20 160
TSC-24-200 M-24 200
TSC-30-250 M-30 250
SUITABLE FOR BOLT LENGTH
TSC-20-200 M-20 200
TSC-24-250 M-24 250
STEPPED STRAP CLAMP Hardened & Tempered, Black Finish
To be used with step block.
TSSC-12-65TSSC-12-100TSSC-12-125TSSC-16-75TSSC-16-125TSSC-16-160TSSC-20-160TSSC-24-200
M-12M-12M-12M-16M-16M-16M-20M-24
6510012575
125160160200
MODEL SUITABLE FOR BOLT LENGTH
TSSC-10-120 M-10 120TSSC-10-80 M-10 80TSSC-10-60 M-10 60
T-BOLT Forged Head, Hardened & Tempered, High Tensile Steel, Black Finish
MODEL LENGTHL
80
100
160
60
80
100
125
160
200
80
130
200
80
100
130
160
200
250
290
110
150
210
110
150
210
285
150
210
110
150
210
250
300
200
250
300
THREADSIZE
M12
M12
SUITABLE FOR
T-SLOT SIZE
12
14
TTB-1212-80
TTB-1212-100
TTB-1212-160
TTB-1214-60
TTB-1214-80
TTB-1214-100
TTB-1214-125
TTB-1214-160
TTB-1214-200
TTB-1616-80
TTB-1616-130
TTB-1616-200
TTB-1618-80
TTB-1618-100
TTB-1618-130
TTB-1618-160
TTB-1618-200
TTB-1618-250
TTB-1618-290
TTB-2020-110
TTB-2020-150
TTB-2020-210
TTB-2022-110
TTB-2022-150
TTB-2022-210
TTB-2022-285
TTB-2424-150
TTB-2424-210
TTB-2428-110
TTB-2428-150
TTB-2428-210
TTB-2428-250
TTB-2428-300
TTB-3036-200
TTB-3036-250
TTB-3036-300
SIZEE
18
22
M1616 25
M1618 28
M2020 32
M2022 35
M2424 40
M24 28 44
M3036 54
E
L
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
With hex key hole at top face for use on machine beds having tapped holes.
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
For use with T-nuts.
MODELTHREAD
SIZETOTAL
LENGTHTHREADLENGTH
TCS-8-75
TCS-8-100
TCS-8-150
TCS-10-75
TCS-10-100
TCS-10-125
TCS-10-150
TCS-10-175
TCS-10-200
TCS-12-75
TCS-12-100
TCS-12-125
TCS-12-150
TCS-12-175
TCS-12-200
TCS-12-250
TCS-12-300
TCS-14-100
TCS-14-150
TCS-14-200
TCS-14-250
TCS-16-75
TCS-16-100
TCS-16-125
TCS-16-150
TCS-16-175
TCS-16-200
TCS-16-250
TCS-16-300
TCS-20-100
TCS-20-150
TCS-20-200
TCS-20-250
TCS-20-300
TCS-20-400
TCS-20-500
TCS-24-150
TCS-24-200
TCS-24-250
TCS-24-300
TCS-24-400
TCS-24-500
TCS-30-150
TCS-30-200
TCS-30-250
TCS-30-300
TCS-30-400
TCS-30-500
75
100
150
75
100
125
150
175
200
75
100
125
150
175
200
250
300
100
150
200
250
75
100
125
150
175
200
250
300
100
150
200
250
300
400
500
150
200
250
300
400
500
150
200
250
300
400
500
M-8
M-10
M-12
M-14
M-16
M-20
11 X 48
11 X 63
11 X 95
13 X 48
13 X 63
13 X 75
13 X 95
13 X 110
13 X 125
15 X 48
15 X 63
15 X 75
15 X 95
15 X 110
15 X 125
15 X 160
15 X 190
17 X 63
17 X 95
17 X 125
17 X 160
19 X 50
19 X 63
19 X 75
19 X 95
19 X 110
19 X 125
19 X 160
19 X 190
27 X 60
27 X 95
27 X 125
27 X 160
27 X 190
27 X 250
27 X 250
35 X 95
35 X 120
35 X 160
35 X 190
35 X 250
35 X 250
43 X 95
43 X 120
43 X 160
43 X 190
43 X 250
43 X 250
M-24
M-30
MODELTHREAD
SIZESUITABLE FOR T-SLOT SIZE
T- NUT Hardened & Tempered, Black Finish based on IS:2015
TTN-10-8
TTN-12-10*
TTN-14-10
TTN-14-12*
TTN-16-12
TTN-16-14*
TTN-18-12
TTN-18-16*
TTN-20-16
TTN-22-16
TTN-22-20*
TTN-24-20
TTN-28-24
TTN-36-24
TTN-36-30
10
12
14
14
16
16
18
18
20
22
22
24
28
36
36
15
18
22
22
25
25
28
28
32
35
35
40
44
54
54
M-8
M-10
M-10
M-12
M-12
M-14
M-12
M-16
M-16
M-16
M-20
M-20
M-24
M-24
M-30
S
SIZES
* marked models are not recommended for heavy duty use because of less wall thickness outside the threading.
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
Knurled outside diameter for easy gripping while quick insertion or removal.
C-WASHER Case Hardened, Ground Faces, Black Finish
MODELSUITABLE
FOR BOLT
TCW-10TCW-12TCW-14TCW-16TCW-20TCW-24TCW-30
M-10M-12 M-14M-16M-20M-24M-30
based on IS : 4291
THICKNESS
991111111114
OUTSIDE
DIA
4048636380
100100
PLAIN WASHER Case Hardened, Black Finish based on IS : 4291
MODELSUITABLE FOR
BOLTTHICKNESS
OUTSIDE
DIA
TPW-8 M-8 4 23TPW-10 M-10 4 28TPW-12 M-12 5 35TPW-14 M-14 6 40TPW-16 M-16 7 45TPW-18 M-18 7 48TPW-20 M-20 7 48TPW-22 M-22 8 48
TPW-30 M-30 11 70
Consists of :T-Nuts : 6 Nos.Clamping Studs of six different lengths : 4 Nos. eachFlanged Nuts : 6 Nos.Extension Nuts : 4 Nos.Stepped Strap Clamps of three different lengths : 2 Nos. each Step blocks of three different sizes : 2 pairs (4 Nos.) each
CLAMPING KIT - 58 PIECE with step blocks & stepped strap clamps
TCK-58-1412TCK-58-1612L
TCK-58-1210TCK-58-1410TCK-58-1412L
M-12M-12
M-10M-10M-12
1312
99
12
TCK-58-1612TCK-58-1812TCK-58-1816TCK-58-2016TCK-58-2216
1416
121414
1618182022
M-12M-12M-16M-16M-16
1313181819
MODEL SUITABLE FOR T-SLOT SIZE N.W. Kgs.
Also Included T-Slot
Cleaner FFFREE
CLAMPING KIT - 34 PIECE with adjustable support plates & strap clamps
141618
M-12M-12M-12
TCK-34-1412TCK-34-1612TCK-34-1812
MODEL SUITABLE FOR T-SLOT SIZE THREAD SIZE
Consists of :
T-Nuts : 4 nos.Clamping Studs of four different lengths : 4 nos. eachFlanged Nuts : 4 nos.Extension Nuts : 2 nos.Strap Clamps of two different lengths : 2 nos. eachAdjustable Support Plates of two different sizes : 2 nos. each
CMM CLAMPING KIT - 62 PIECE with Aluminum / plastic clamping elements
Specially designed for 3D coordinate measuring machine and other inspection and gaging applications.
Model CMMCK-62 consists of :
28 nos. Aluminum M-8 studs of different lengths upto 200mm long.8 nos. M-8 Aluminum flanged nuts (Hand Tightening Type).6 nos. Aluminum alloy strap clamps.8 nos. Aluminum screw jacks.4 nos. Aluminum top rest pads for screw jacks.8 nos. Plastic bottom rest pads for screw jacks and studs.
Adaptor available on request for CMM’s with M-10 or M-12 threaded beds.
EXTENSION NUT Hardened & Tempered, Black Finish
These nuts are used to couple the studs with studs or T- bolts in order to increase their length.
TEN-8TEN-10TEN-12TEN-14TEN-16TEN-20TEN-24TEN-30
M-8M-10M-12 M-14M-16M-20M-24M-30
2430364248607290
MODEL THREAD SIZE TOTAL LENGTH
Visit for online details of above products or write to us for a print copy www.toolfastclamps.com
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
7
Also Included T-Slot
Cleaner FFFREE
THREAD SIZE
T-Slot size mentioned in these pages is size ‘A’ of the T-Slot as shown here.A
MODEL THREAD SIZE TOTAL
LENGTH
These nuts have longer life as they have more number of threads than ordinary nuts.
EXTRA LONG NUT Hardened & Tempered, Black Finish
TELN-8 M-8 12
TELN-10 M-10 15
TELN-12 M-12 18
TELN-14 M-14 21
TELN-16 M-16 24
TELN-20 M-20 30
TELN-24 M-24 36
TELN-30 M-30 45
TELN-18 M-18 27
TELN-22 M-22 32
MODELTHREAD
SIZETOTAL
LENGTH
TCSB-12-100
TCSB-12-125
TCSB-12-150
TCSB-12-175
TCSB-16-125
TCSB-16-150
TCSB-16-175
TCSB-16-200
TCSB-20-150
TCSB-20-175
TCSB-20-200
TCSB-24-175
TCSB-24-200
TCSB-24-225
100
125
150
175
125
150
175
200
150
175
200
175
200
225
M-12
M-16
M-20
M-24
THREADLENGTH
30 X 40
30 X 50
30 X 65
30 X 80
40 X 50
40 X 65
40 X 80
40 X 100
40 X 65
40 X 80
40 X 100
50 X 60
50 X 70
50 X 80
50 X 60
50 X 70
50 X 80
60 X 70
60 X 80
60 X 90
TCSB-18-150
TCSB-18-175
TCSB-18-200
150
175
200
M-18
TCSB-22-150
TCSB-22-175
TCSB-22-200
150
175
200
M-22
TPW-24 M-24 9 60
FLANGED NUT Forged, Hardened & Tempered, Black Finish
These nuts have flanged face for larger face contact with the surface tobe tightened on
TFN-10 15M-10
TFN-16 24M-16
TFN-20 30M-20
TFN-24 36M-24
MODEL THREAD SIZE TOTAL
LENGTH
TFN-12 18M-12
T-BOLT Forged Head, Hardened & Tempered, High Tensile Steel, Black Finish
MODEL LENGTHL
80
100
160
60
80
100
125
160
200
80
130
200
80
100
130
160
200
250
290
110
150
210
110
150
210
285
150
210
110
150
210
250
300
200
250
300
THREADSIZE
M12
M12
SUITABLE FOR
T-SLOT SIZE
12
14
TTB-1212-80
TTB-1212-100
TTB-1212-160
TTB-1214-60
TTB-1214-80
TTB-1214-100
TTB-1214-125
TTB-1214-160
TTB-1214-200
TTB-1616-80
TTB-1616-130
TTB-1616-200
TTB-1618-80
TTB-1618-100
TTB-1618-130
TTB-1618-160
TTB-1618-200
TTB-1618-250
TTB-1618-290
TTB-2020-110
TTB-2020-150
TTB-2020-210
TTB-2022-110
TTB-2022-150
TTB-2022-210
TTB-2022-285
TTB-2424-150
TTB-2424-210
TTB-2428-110
TTB-2428-150
TTB-2428-210
TTB-2428-250
TTB-2428-300
TTB-3036-200
TTB-3036-250
TTB-3036-300
SIZEE
18
22
M1616 25
M1618 28
M2020 32
M2022 35
M2424 40
M24 28 44
M3036 54
E
L
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
With hex key hole at top face for use on machine beds having tapped holes.
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
For use with T-nuts.
MODELTHREAD
SIZETOTAL
LENGTHTHREADLENGTH
TCS-8-75
TCS-8-100
TCS-8-150
TCS-10-75
TCS-10-100
TCS-10-125
TCS-10-150
TCS-10-175
TCS-10-200
TCS-12-75
TCS-12-100
TCS-12-125
TCS-12-150
TCS-12-175
TCS-12-200
TCS-12-250
TCS-12-300
TCS-14-100
TCS-14-150
TCS-14-200
TCS-14-250
TCS-16-75
TCS-16-100
TCS-16-125
TCS-16-150
TCS-16-175
TCS-16-200
TCS-16-250
TCS-16-300
TCS-20-100
TCS-20-150
TCS-20-200
TCS-20-250
TCS-20-300
TCS-20-400
TCS-20-500
TCS-24-150
TCS-24-200
TCS-24-250
TCS-24-300
TCS-24-400
TCS-24-500
TCS-30-150
TCS-30-200
TCS-30-250
TCS-30-300
TCS-30-400
TCS-30-500
75
100
150
75
100
125
150
175
200
75
100
125
150
175
200
250
300
100
150
200
250
75
100
125
150
175
200
250
300
100
150
200
250
300
400
500
150
200
250
300
400
500
150
200
250
300
400
500
M-8
M-10
M-12
M-14
M-16
M-20
11 X 48
11 X 63
11 X 95
13 X 48
13 X 63
13 X 75
13 X 95
13 X 110
13 X 125
15 X 48
15 X 63
15 X 75
15 X 95
15 X 110
15 X 125
15 X 160
15 X 190
17 X 63
17 X 95
17 X 125
17 X 160
19 X 50
19 X 63
19 X 75
19 X 95
19 X 110
19 X 125
19 X 160
19 X 190
27 X 60
27 X 95
27 X 125
27 X 160
27 X 190
27 X 250
27 X 250
35 X 95
35 X 120
35 X 160
35 X 190
35 X 250
35 X 250
43 X 95
43 X 120
43 X 160
43 X 190
43 X 250
43 X 250
M-24
M-30
MODELTHREAD
SIZESUITABLE FOR T-SLOT SIZE
T- NUT Hardened & Tempered, Black Finish based on IS:2015
TTN-10-8
TTN-12-10*
TTN-14-10
TTN-14-12*
TTN-16-12
TTN-16-14*
TTN-18-12
TTN-18-16*
TTN-20-16
TTN-22-16
TTN-22-20*
TTN-24-20
TTN-28-24
TTN-36-24
TTN-36-30
10
12
14
14
16
16
18
18
20
22
22
24
28
36
36
15
18
22
22
25
25
28
28
32
35
35
40
44
54
54
M-8
M-10
M-10
M-12
M-12
M-14
M-12
M-16
M-16
M-16
M-20
M-20
M-24
M-24
M-30
S
SIZES
* marked models are not recommended for heavy duty use because of less wall thickness outside the threading.
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
Knurled outside diameter for easy gripping while quick insertion or removal.
C-WASHER Case Hardened, Ground Faces, Black Finish
MODELSUITABLE
FOR BOLT
TCW-10TCW-12TCW-14TCW-16TCW-20TCW-24TCW-30
M-10M-12 M-14M-16M-20M-24M-30
based on IS : 4291
THICKNESS
991111111114
OUTSIDE
DIA
4048636380
100100
PLAIN WASHER Case Hardened, Black Finish based on IS : 4291
MODELSUITABLE FOR
BOLTTHICKNESS
OUTSIDE
DIA
TPW-8 M-8 4 23TPW-10 M-10 4 28TPW-12 M-12 5 35TPW-14 M-14 6 40TPW-16 M-16 7 45TPW-18 M-18 7 48TPW-20 M-20 7 48TPW-22 M-22 8 48
TPW-30 M-30 11 70
Consists of :T-Nuts : 6 Nos.Clamping Studs of six different lengths : 4 Nos. eachFlanged Nuts : 6 Nos.Extension Nuts : 4 Nos.Stepped Strap Clamps of three different lengths : 2 Nos. each Step blocks of three different sizes : 2 pairs (4 Nos.) each
CLAMPING KIT - 58 PIECE with step blocks & stepped strap clamps
TCK-58-1412TCK-58-1612L
TCK-58-1210TCK-58-1410TCK-58-1412L
M-12M-12
M-10M-10M-12
1312
99
12
TCK-58-1612TCK-58-1812TCK-58-1816TCK-58-2016TCK-58-2216
1416
121414
1618182022
M-12M-12M-16M-16M-16
1313181819
MODEL SUITABLE FOR T-SLOT SIZE N.W. Kgs.
Also Included T-Slot
Cleaner FFFREE
CLAMPING KIT - 34 PIECE with adjustable support plates & strap clamps
141618
M-12M-12M-12
TCK-34-1412TCK-34-1612TCK-34-1812
MODEL SUITABLE FOR T-SLOT SIZE THREAD SIZE
Consists of :
T-Nuts : 4 nos.Clamping Studs of four different lengths : 4 nos. eachFlanged Nuts : 4 nos.Extension Nuts : 2 nos.Strap Clamps of two different lengths : 2 nos. eachAdjustable Support Plates of two different sizes : 2 nos. each
CMM CLAMPING KIT - 62 PIECE with Aluminum / plastic clamping elements
Specially designed for 3D coordinate measuring machine and other inspection and gaging applications.
Model CMMCK-62 consists of :
28 nos. Aluminum M-8 studs of different lengths upto 200mm long.8 nos. M-8 Aluminum flanged nuts (Hand Tightening Type).6 nos. Aluminum alloy strap clamps.8 nos. Aluminum screw jacks.4 nos. Aluminum top rest pads for screw jacks.8 nos. Plastic bottom rest pads for screw jacks and studs.
Adaptor available on request for CMM’s with M-10 or M-12 threaded beds.
EXTENSION NUT Hardened & Tempered, Black Finish
These nuts are used to couple the studs with studs or T- bolts in order to increase their length.
TEN-8TEN-10TEN-12TEN-14TEN-16TEN-20TEN-24TEN-30
M-8M-10M-12 M-14M-16M-20M-24M-30
2430364248607290
MODEL THREAD SIZE TOTAL LENGTH
Visit for online details of above products or write to us for a print copy www.toolfastclamps.com
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
7
Also Included T-Slot
Cleaner FFFREE
THREAD SIZE
T-Slot size mentioned in these pages is size ‘A’ of the T-Slot as shown here.A
MODEL THREAD SIZE TOTAL
LENGTH
These nuts have longer life as they have more number of threads than ordinary nuts.
EXTRA LONG NUT Hardened & Tempered, Black Finish
TELN-8 M-8 12
TELN-10 M-10 15
TELN-12 M-12 18
TELN-14 M-14 21
TELN-16 M-16 24
TELN-20 M-20 30
TELN-24 M-24 36
TELN-30 M-30 45
TELN-18 M-18 27
TELN-22 M-22 32
MODELTHREAD
SIZETOTAL
LENGTH
TCSB-12-100
TCSB-12-125
TCSB-12-150
TCSB-12-175
TCSB-16-125
TCSB-16-150
TCSB-16-175
TCSB-16-200
TCSB-20-150
TCSB-20-175
TCSB-20-200
TCSB-24-175
TCSB-24-200
TCSB-24-225
100
125
150
175
125
150
175
200
150
175
200
175
200
225
M-12
M-16
M-20
M-24
THREADLENGTH
30 X 40
30 X 50
30 X 65
30 X 80
40 X 50
40 X 65
40 X 80
40 X 100
40 X 65
40 X 80
40 X 100
50 X 60
50 X 70
50 X 80
50 X 60
50 X 70
50 X 80
60 X 70
60 X 80
60 X 90
TCSB-18-150
TCSB-18-175
TCSB-18-200
150
175
200
M-18
TCSB-22-150
TCSB-22-175
TCSB-22-200
150
175
200
M-22
TPW-24 M-24 9 60
FLANGED NUT Forged, Hardened & Tempered, Black Finish
These nuts have flanged face for larger face contact with the surface tobe tightened on
TFN-10 15M-10
TFN-16 24M-16
TFN-20 30M-20
TFN-24 36M-24
MODEL THREAD SIZE TOTAL
LENGTH
TFN-12 18M-12
WEDGE CLAMPS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
WEDGE CLAMP - TWC SERIES Serrated Hardened Jaws
TWC-8
TWC-12
TWC-16
MODEL
M8
M12
M16
CLAMPING
SCREW
If your workpiece is suitable for clamping with 'TOOLFAST' Wedge clamps, our team can design and manufacture a multiple clamping fixture for you as the one shown in the picture.
Please send in your enquiries with workpiece / machine table specifications to us if you feel that 'TOOLFAST' wedge clamps are suitable for your workpiece or simply send your workpiece/ machine details to us and let us decide it.
MULTIPLE WORKPIECE CLAMPING FIXTURES WITH TWC SERIES WEDGE CLAMPS DESIGNED & MANUFACTURED BY TOOLFAST
FixtureBase Plate
Wedge Clamp
WorkpiecesUnusual Shape
Workpiece
Machinable Wedge Clamp
WEDGE CLAMP - RIGID BODY, HARDENED TOOL STEEL, DOWNWARD FORCE
‘TOOLFAST’ manufactures all models of wedge clamps with new patented design now in India.
¦ Patented design with bottom spring ensures downward Clamping force
¦ Hidden spring eliminates clogging of chips in spring coil
These have plain hardened jaws with added two tapped holes for attaching additional jaw inserts if need be.
WEDGE CLAMP - TWC-P SERIES Plain Hardened Jaws with Tapped Holes
M8
M12
M16
CLAMPING
SCREW
TWC-8 P
TWC-12 P
TWC-16 P
MODEL
These have extra material on jaws (soft) to machine as per the workpiece shape enabling fixturing of uneven or unusual shape work pieces.
WEDGE CLAMP - TWC-M SERIES Machinable Jaws
M8
M12
M16
CLAMPING
SCREW
• Model VTWC-16-60-350 available as standard having overall length 350mm capable of jaw opening 91mm in case of two workpieces.
• Above vice can be supplied in custom built lengths to suit different sizes of workpieces. Send your enquiries to us if you feel that 60mm jaw width vice can hold your workpiece. Additional fixed jaws and TWC series clamps can be included in the vice if more than two workpieces to be clamped.
• For uneven or unusual shape workpieces, TWC-M and TWC-P series wedge clamps can also be used in above vice.
TOOLFAST offers a 60mm jaw width vice which is capable of clamping multiple workpieces. All parts such as TWC wedge clamp, fixed jaws and the main body are modular and interchangeable.
MULTIPLE CLAMPING VICE WITH TWC-16 WEDGE CLAMPS
Wedge Clamp TWC-16
Workpieces
Adjustable PositionFixed Jaw
4 Nos. Mounting Clamps included
TWC-8 M
TWC-12 M
TWC-16 M
MODEL
2D / 3D CAD les available on request
8
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
Material SS440, Hardened & Ground
WEDM CLAMP
MODEL
TWEC - 1
TWEC - 2
70 X 23 X 8
70 X 23 X 12
M-8
M-8
OVERALL SIZESUITABLE FOR
CLAMPING SCREW
Material SS440, Hardened & Ground
Parallelism within +0.005 mm
WEDM ADJUSTABLE FIXTURE Model TWEF-1
120
160
240
200
22
Material SS440, Hardened & Ground
Parallelism within + 0.005 mm
WEDM RULER
MODEL
TWER - 370
TWER - 450
TWER - 550
TWER - 650
TWER - 750
TWER - 950
LENGTH
370
450
550
650
750
950
BREADTH
45
60
60
80
80
80
HEIGHT
30
30
30
36
36
40
WEDM VICE - Type B
Material SS440, Hardened & Ground
Parallelism and Squareness within + 0.005 mm
MODEL
WEVB - 75
WEVB - 100
A B C D G Max.
127
152
100
100
21
21
72
72
75
100
A
B
D
G
C
LevelAdjustment
Screws
BD
C
A
G
E
Material SS440, Hardened & Ground
Parallelism and Squareness within + 0.005 mm
WEDM VICE - 3 Axis Level Adjustable
MODEL
WEVB - 160
A B C D E G Max.
300 170 24 50 16060
MODEL
WEVE - 75
WEVE - 100
A B C D G Max.
140
165
210
210
20
20
28
28
75
100
Material SS440, Hardened & Ground
Parallelism and Squareness within + 0.005 mm
WEDM VICE WITH EXTENSION
B
D
A
C
G
Material SS440, Hardened & Ground
Parallelism and Squareness within + 0.005 mm
EDM ELECTRODE HOLDER
MODEL
EDV - 20
EDV - 45
A B C D E G Max.
65
100
25
35
32
35
12
16
20
45
20
25
B
A
CD
E
G
WIRE CUT EDM WORKHOLDERS
Material SS440, Hardened & Ground
Parallelism within + 0.005 mm
WEDM EXTENSIONS
TWEE - 1 TWEE - 2
MODEL
TWEE - 1
TWEE - 2
120 X 50 X 15
120 X 100 X 15
OVERALL SIZE
Material SS440, Hardened & Ground
Parallelism within + 0.005 mm
WEDM EXTENSION WITH CLAMP
Application View
MODEL
TWEEC - 1 40 140
OVERALL WIDTH OVERALL LENGTH
Material SS440, Hardened & Ground
Parallelism within + 0.005 mm
WEDM CORNER FIXTURE
MODEL
TWCF - 1
TWCF - 2
0 - 50
0 - 100
100 x 120
150 x 170
CLAMPING RANGE OVERALL SIZE
Material SS440, Hardened & Ground
Parallelism and Squareness within + 0.005 mm
WEDM VICE - Type A
MODEL
WEVA - 50
WEVA - 150
A B C D E G Max.
120
225
85
100
28
32
25
35
50
150
30
30
AC
B
D
E
G
New