workplace compliance product solutions solutions bro… · this technology is suitable for a range...

WORKPLACE COMPLIANCE PRODUCT SOLUTIONS

www.euroenvironmental.co.ukE: [email protected]: 0870 701 9170

2

KNOWLEDGE, TECHNOLOGY AND INNOVATION COMBINED TO DELIVER COMPLIANCE SOLUTIONS

Could your organisation benefit from the latest technological developments in workplace exposure and air quality monitoring systems?

Using our expertise in this area, we can offer a range of products that

provide cost-effective solutions across a range of industries and environments. Our technologies can provide a solution where ongoing health and safety compliance is the issue or for scenarios where an enhanced level of reassurance is needed.

Diesel Engine Exhaust Emissions (DEEE) Monitoring

Industrial Hygiene Compliance Monitoring

Air Purification Solutions

WIRELESS REAL-TIME MONITORING DATA FOR A RANGE OF APPLICATIONS

Time

VO

C’s

9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00

Dus

t Pa

rtic

les

Legionella Monitoring Solutions

Indoor Air Quality (IAQ ) Monitoring


3

Get 24/7 peace of mind with our state of the art remote monitoring systems


4

ACCURATE DEEE MONITORING, ENSURING A COMPLIANT AND SAFE WORKPLACE

If vehicle exhaust emissions are an ongoing concern in your workplace, we can offer a solution. Our DEEE monitoring devices are designed to detect the most significant target contaminants associated with this type of exposure.

Depending on the application we are able to offer devices for internal or external environments

that will detect all four targets simultaneously, providing real-time data that can be accessed live on the cloud using ethernet or 4G connectivity. Our occupational hygiene technicians will install and setup the devices at your site, as well as providing an ongoing monthly consultancy overview of the data

Diesel Engine Exhaust Emissions (DEEE) Monitoring

along with an annual maintenance/calibration service. Typical scenarios that might benefit from this type of technology include buildings close to high traffic areas (schools, offices) RORO ferries, warehousing and vehicle handling organisations (car auctions, vehicle repair garages).

The particulate sensor will detect DEEE soot levels as small as 1 micron in size using laser light scattering technology.

Particulates

The MEMS based carbon monoxide sensor has a resolution of 1ppm.

Carbon monoxide (CO)

The levels of total volatile organic compounds are detected using a photo ionisation sensor capable of achieving a resolution of 0.1 ppm.

Volatile organic compounds (VOC’s)

Fuel cell sensor technology achieves detection levels for NO2 as low as 50 ppb.

Nitrogen dioxide (NO2)2


5

INDOOR AIR QUALITY MONITORING, PROTECTING YOUR PEOPLE AND BUILDINGS

If maintaining good indoor air quality within your workplace is a priority, we can help with a range of wireless cloud-based sensors. The monitoring data from our devices will provide ongoing guidance for the operation of your ventilation and air purification systems.

Our occupational hygiene technicians will install and setup the devices at your site. Providing an ongoing monthly consultancy overview of the data along with an annual maintenance/calibration service.

Indoor Air Quality (IAQ ) Monitors

The following targets are available within our IAQ range of sensors and when combined with our expertise, they can be tailored to meet the specific needs of your environment.

The particulate sensor will detect dust levels as small as 1 micron in size using laser light scattering technology.

Particulates

The levels of total volatile organic compounds are detected using a photo ionisation sensor capable of achieving a resolution of 0.1 ppm.

Volatile organic compounds

Accurately monitoring relative humidity and temperature levels with a resolution of 1%.

Humidity and Temperature

The carbon dioxide sensor uses a non-dispersive infrared (NDIR) absorption sensor which has a resolution of 45ppm and a detection range of 0-10000ppm.

Carbon dioxide2


6

ENSURING A SAFE WORKING ENVIRONMENT IN ALL INDUSTRIAL WORKPLACES

If workplace exposure and air quality is an ongoing concern in your workplace, we can offer a solution. Our industrial hygiene monitoring devices are designed to detect levels of the most significant airborne contaminants associated with industrial activities.

Our sensors can be strategically positioned throughout your workplace to provide a representative picture of potential exposure and air quality. Our technology will provide real-time data that can be accessed live on the cloud using our wireless ethernet or 4G connectivity.

One of our occupational hygiene technicians will install and setup the devices at your site, we will

Industrial Hygiene Compliance Monitors

then provide ongoing monthly reviews of the data along with an annual maintenance/calibration service.

Typical scenarios that might benefit from this type of technology include environments where air quality needs to be maintained to protect processes and products along with preventing exposure to workers.

The particulate sensor will detect dust levels as small as 1 micron in size using laser light scattering technology. These sensors allow PM2.5 and PM10 alerts to be set to ensure workplace exposure limits are not exceeded.

Dust

The levels of volatile organic compounds are detected using a photo ionisation sensor capable of achieving a resolution of 0.1 ppm. Monitoring levels of total volatiles within the workplace, covering an extensive range of potentially harmful vapours that may be generated from industrial processes.

Volatile organic compounds (VOC’s)


7

TOTAL LEGIONELLA COMPLIANCE WITH OUR INNOVATIVE CONTROL SCHEME TECHNOLOGY

Does your organisation need help to keep on top of your Legionella control scheme monitoring? Using our wireless real-time temperature sensor technology, we can take on the responsibility of your ongoing control scheme requirements with just a single site visit per year.

Our technician will strategically install sensors to sentinel points, tanks and calorifiers. The data

from these devices will allow us to remotely monitor the condition of your water systems and provide you with monthly reports that ensure you are remaining compliant.

Annually we will service and calibrate the sensor devices, carry out inspections of your water storage vessels and ensure all your systems and records are up to date and meeting the requirements of ACoP L8.


This remote wireless technology, combined with our expertise offers a superior alternative to traditional Legionella monitoring which typically requires monthly checks carried out by a responsible person. Over 3+ years, we are confident that our solution will provide a cost-saving whilst at the same time delivering an enhanced level of control data.

We install sensors on the flow and return of calorifiers, ensuring they achieve temperatures of above 60 and 50 degrees respectively.

Calorifiers

Hot water sentinel points are monitored to ensure that they are achieving temperatures in excess of 50 degrees.

Hot water Outlets

Sensors are installed within cold water storage tanks to ensure water temperatures remain below 20 degrees.

Water Storage Tanks

Cold water sentinel points are monitored to ensure the supply temperatures remains below 20 degrees.

Cold Water Outlets


8

DISCOVER THE SUPERIOR ALTERNATIVE TO CONVENTIONAL LEGIONELLA MONITORING...


3.

2.

1.

Ethernet/4G Gateway

Ongoing data review

Monthly control scheme reports

Yearly compliance &system checks

Water Tanks

SentinelPoints

Calorifier


9

A RANGE OF EFFICIENT AIR DECONTAMINATION UNITS SUITABLE FOR A VARIETY OF WORKPLACES

For those environments where air quality is paramount or additional reassurance is needed, we can offer plasma ionisation air purification technology that is capable of removing the smallest of airborne contaminants.

This technology is suitable for a range of environments such as offices, hotels, care homes, event rooms and healthcare settings. The air purification units are non-intrusive and have a relatively low running cost compared to alternative technologies, only requiring annual servicing.

Air Purification Solutions

Genano® 350

Efficient and compact air decontamination unit suitable for offices and general environments of up to 100m2.

Genano® 5250M/5250A

Air decontamination unit with superior cleaning capacity for environments with a high contamination risk. Where ultra-pure air is required, such as healthcare settings and clean rooms, this unit is suitable for areas up to 250m2.

Genano® Tube

Wall or ceiling mounted unit suitable for hallways or lobby areas, which can also be integrated into an existing ventilation system.

PLASMA IONISATION TECHNOLOGY OFFERS A SUPERIOR LEVEL OF AIR PURIFICATION

GENANO (0.003 µm)

pollen

0.001 µm0.01 µm0.1 µm1 µm

Particle size

CLE

AN

ING

EFF

ECIE

NC

Y

10 µm100 µm1000 µm

mold spores

house dust allergenes

bacteria

cat allergenes virusesheavy dust

settling dust suspended atmospheric dust

smog

tabacco smoke

sootoil smoke

fly ash

cement dust

gaseous contaminants

0.0001 µm


10

Keeping workplaces safe with knowledge and innovation

Our offices hours are Monday to Friday 8:30am to 5:00pm GMT. If you contact us via email we aim to respond with 24 hours if over a weekend or within the same working day.

GET IN TOUCHHEAD OFFICEAtlas 6, Balby Carr Bank, Doncaster,South Yorkshire, DN4 5JT.

T: 0870 701 9170

LONDON OFFICE2nd Floor, Unit 3, Gateway 1000, Arlington Business Park, Stevenage, SG1 2FP.

T: 0870 120 1188

E: [email protected]

workplace compliance product solutions solutions bro… · this technology is suitable for a range...

Documents