workshop giftcard holder

7/30/2019 Workshop Giftcard Holder

http://slidepdf.com/reader/full/workshop-giftcard-holder 1/13

Workshop Giftcard Holder

Materials you need for this holder: 1 sheet Papicolor cardstock Nr. 12 Fiësta RedDesign Paper: It’s Christmas Time from Maja Design

Nellies Multi Frame Die MFD047 "Oval-4"Nellies Multi Frame Die MFD048 "Rectangle-3"Nellies Multi Frame Die MFD050 "Star-3"Nellies Shape Dies SD001 "Star swirl"Go Create Die for tekst stamp: NV203Go Create Die for tekst stamp: NV204Clear stamp Wild Rose Studio CL191 "Jolly Greetings"Clear stamp Wild Rose Studio Christmas Circles CL192Corner punchDouble sided tape



How to make this Holder: Cut the cardstock into the following size:4 1/4 x 10 Inch

Cut the design paper for the inside into the following size:

(2x) 2 3/4 x 4 Inch(1x) 1 3/4 x 4(2x) 4 x 3/4 Inch

Cut the design paper for the outside into the following size:(2x) 4 x 2 3/4 Inch(1x) 4 x 1 3/4 Inch

Scor the cardstock at: 3, 4, 5, 8 Inch and rond the 4 corners.



Glue the design papers for the inside at the cardstock. And round the corners at thetop and the bottom.

Glue the design papers for the outside at the cardstock. And round the corners at thetop and the bottom



Lay the holder before you with the inside towards you. And fold the top and thebottom at the scor lines.



Fold the little insides up at the scor lines, this is holding the giftcard later.



So is the holder looking while it is folded.



Lay the holder before you with the outside up and put some double sided tape at oneof the little insides, against the scor line.

Peel the backing from the tape and glue the little insides togetter. And is looking nowlike this:



Take your paper cutter and cut the top from the little inside, just cut it down till your design paper. Here you can put in your giftcard.



Take now Nellies Multi Frame Die MFD048 "Rectangle-3" and Die cut the Die, for this workshop i printed my own giftcard. Cut a little mat for the giftcard and glue thegiftcard on the mat.

Take Nellies Multi Frame Die MFD047 "Oval-4" and Die but the oval. Stamp the tekstinto the oval and decorate it with little golden sticker dots. Glue the oval at the bottomat the inside from the holder.



Take the Nellies Shape Dies SD001 "Star swirl" and Die cut it in Red and White. Cutthe White stars from the swirl and glue them on the red stars. Place little goldensticker dots in the heart of the stars. Glue the swirl at the inside of the holder.

Place the giftcard into the holder.



Cut for the belly band a piece of Red cardstock in the following size:

1 x 7 Inch. And scor it at 2 and 5.



Put some double sided tape at both of the ends of the belly band and glue it togetter.

Die cut Nellies Multi Frame Die MFD050 "Star-3" and glue it on the belly band. Diecut the stamp Dies, stamp your test and glue this into the star.

Slide the belly band on the giftcard holder.

workshop giftcard holder

Documents