world class strength equipment made in...

4
LEGEND FITNESS PRODUCT SPECIFICATIONS Frame Materials: All equipment is CAD drawn and machined to a minimum tolerance of +/- .030. Construction is primarily of three-by-three inch 11 gauge square tubing, or four-by-two inch and three-by-two inch 11 gauge rectangular tubing. Frame Finish: Each piece of equipment is prepared both mechanically and chemically for powder-coating. This is an engineered powder that is scuff resistant and long wearing. Padding & Upholstery: All padding foam has a density of 10 pounds per cubic foot. Upholstery is 32-ounce Naugahyde. All pads are top double-stitched. Support board corners are radiused and edges are chamfered on both top and bottom for comfort and durability. Bearings: Non-friction roller bearings contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment. Weight Transport: All cables are ultra-flexible 3/16” diameter aircraft-grade cable with a seven-by-nineteen construction and black nylon coating. Our cables are rated at a minimum breaking strength of 2,000 pounds. Pulleys: Pulleys are 4 1/2” diameter fiberglass-impregnated nylon with a precision fit cable groove and double sealed non-friction roller bearings. Weight Plates: Weight stacks on selectorized equipment feature solid steel weight stack plates with a black finish and are located with a coiled, self-storing cord to prevent pin removal or loss. Self aligning, low friction sleeve bearings surround the guide rods on every weight stack plate. Spring Suspension: Heavy duty springs are used under the weight stack to reduce shock and vibration stress. Guide Rods: Guide rods are solid steel and hard chrome-plated to ensure quiet operation and low friction. Hand Grips: 45 durometer rubber hand grips are used for comfort, safety and durability. Legend Fitness is an international fitness equipment manufacturer based in East Tennessee. The folks here are more likely to speak of pickup trucks than private jets and we have brought the Southern sense of value and hard work to the strength and fitness equipment world since 1977. WORLD CLASS STRENGTH EQUIPMENT MADE IN AMERICA PAGE 4

Upload: others

Post on 27-Sep-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: WORLD CLASS STRENGTH EQUIPMENT MADE IN AMERICAlegendfitness.com/wp-content/uploads/legendfitness_8-2_lfadvantage.pdf3Includes end caps, end covers, grip ends, foam rubber grips, smooth

LEGEND FITNESS PRODUCT SPECIFICATIONS

Frame Materials: All equipment is CAD drawn and machined to a minimum tolerance of +/- .030. Construction is primarily of three-by-three inch 11 gauge square tubing, or four-by-two inch and three-by-two inch 11 gauge rectangular tubing.

Frame Finish: Each piece of equipment is prepared both mechanically and chemically for powder-coating. This is an engineered powder that is scuff resistant and long wearing.

Padding & Upholstery: All padding foam has a density of 10 pounds per cubic foot. Upholstery is 32-ounce Naugahyde. All pads are top double-stitched. Support board corners are radiused and edges are chamfered on both top and bottom for comfort and durability.

Bearings: Non-friction roller bearings contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment.

Weight Transport: All cables are ultra-flexible 3/16” diameter aircraft-grade cable with a seven-by-nineteen construction and black nylon coating. Our cables are rated at a minimum breaking strength of 2,000 pounds.

Pulleys: Pulleys are 4 1/2” diameter fiberglass-impregnated nylon with a precision fit cable groove and double sealed non-friction roller bearings.

Weight Plates: Weight stacks on selectorized equipment feature solid steel weight stack plates with a black finish and are located with a coiled, self-storing cord to prevent pin removal or loss. Self aligning, low friction sleeve bearings surround the guide rods on every weight stack plate.

Spring Suspension: Heavy duty springs are used under the weight stack to reduce shock and vibration stress.

Guide Rods: Guide rods are solid steel and hard chrome-plated to ensure quiet operation and low friction.

Hand Grips: 45 durometer rubber hand grips are used for comfort, safety and durability.

Legend Fitness is an international fitness equipment manufacturer based in East Tennessee. The folks here are more likely to speak of pickup trucks than private jets and we have brought the Southern sense of value and hard work to the strength and fitness equipment world since 1977.

WORLD CLASS STRENGTH EQUIPMENT

MADE IN AMERICA

PAGE 4

Page 2: WORLD CLASS STRENGTH EQUIPMENT MADE IN AMERICAlegendfitness.com/wp-content/uploads/legendfitness_8-2_lfadvantage.pdf3Includes end caps, end covers, grip ends, foam rubber grips, smooth

Legend Fitness warrants to the original purchaser that Legend Fitness equipment will be free from defects in material and workmanship under normal use and service for the following periods and in the following respects:

1Frames are defined as the welded structural element of the product, but not any removable fasteners, parts or powder coat finishes.2Includes ABS scuff guards, adder plates, aluminum diamond plates, ball bearings, cables, cable retainers, chains, chrome finishes, docking spacers, flex tube (covers raw shafts), guide rods, fasteners, linear bearings, linear rods, Monster Hook wear surfaces, placard spacers, platform rubber, pop pins, powder coating, roller bearings, rubber bumpers, rubber donuts, rubber grommets, rubber saddles (for pro style dumbbell racks), selector pins, shaft collars, snap links, snap rings, springs, thrust bearings, toe stops, UHMW peg guards, weight stacks, and wheels.3Includes end caps, end covers, grip ends, foam rubber grips, smooth rubber grips, hole plugs, self-adhesive rubber, spring collars, stickers and decals, grip tape, and turn knobs.

EXCLUSIVE REMEDYLegend Fitness’ solution for any of the above warranties shall be repair or replacement of defective parts, or the supply of labor to remedy any defect.

EXCLUSIONS AND LIMITATIONSUNAUTHORIZED SALES AND WARRANTY POLICYAny sale of Legend Fitness products by an unauthorized source or by any other manner not authorized by Legend Fitness shall void the warranty on the applicable product(s). Authorized Legend Fitness dealers and resellers have the knowledge and training to supply you with Legend Fitness products that best meet your needs and to install those products so that you’ll enjoy their maximum performance. Legend Fitness factory warranty is only valid on products purchased direct from a Legend Fitness Sales Representative or from an authorized Legend Fitness Dealer or approved Reseller.

This warranty applies to only the original purchaser and is not transferable.

Under no circumstances will Legend Fitness be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, incidental, secondary or consequential losses, damages, or expenses in connection with exercise products.

This warranty is expressly limited to the repair or replacement of a defective component of Legend Fitness manufacture. Repair or replacement will be at the discretion of Legend Fitness and is the sole remedy of the warranty.

Use of the equipment in any environment that is subject to excessive temperatures or moisture may void the warranty.

This warranty does not cover normal wear and tear – including, but not limited to: cables, belts, chains, wearguards, powder coat finishes, upholstery cuts or any other incidental damage as a result of regular use and attrition.

This warranty does not cover damage that is not a result of a manufacturer defect, including improper assembly, inadequate maintenance, or installation of other parts or components not manufactured or supplied by Legend Fitness.

This warranty does not cover damage or failure as a result of an accident, abuse, corrosion, use of the device other than its intended purpose, discoloration of paint or plastic, neglect, theft, vandalism, fire, flood, lightning, freezing or other natural disasters, collision, or unauthorized modifications.

OUR FACTORY WARRANTY IS VOID IF• You purchase Legend product(s) from an unauthorized dealer or reseller.• You purchase used or pre-owned Legend product(s) from a private party, facility or unauthorized source.• You purchase Legend Fitness product(s) from an Internet site not authorized by Legend Fitness.

Legend Fitness recommends that you verify if the Dealer or Reseller you are considering is an authorized Legend equipment dealer by contacting the Legend Fitness headquarters. This is especially important when considering purchasing Legend Fitness products over the Internet.

Pro Series, LeverEDGE, SelectEDGE Performance Series Varsity Series

Structural Frames1 (excluding powder coat) 15 Years 15 Years 15 Years

Bronze Bushings, Pillow Block Bearings, & Pulleys 5 Years 5 Years 5 Years

Platforms 1 Year 1 Year --

Wood/Foam Plyo Boxes -- 1 Year --

Other Components2 (specified below) 1 Year 1 Year 1 Year

Wear Items & Soft Components3 (specified below) 90 Days 90 Days 90 Days

Upholstery 90 Days 90 Days 90 Days

Legend Fitness Barbells -- 2 Years --

Handles, Grips, & Accessories Not Manufactured By Legend Fitness Refer to Applicable Manufacturer Warranty

THE

GUARANTEE

PAGE 5

Page 3: WORLD CLASS STRENGTH EQUIPMENT MADE IN AMERICAlegendfitness.com/wp-content/uploads/legendfitness_8-2_lfadvantage.pdf3Includes end caps, end covers, grip ends, foam rubber grips, smooth

AlabasterTaupePuttyBlue Ridge Gunmetal DoveGreystoneGraphiteBlack

Parchment

Bone

BisqueDewberry WoodroseChestnutBronzeMochaRustic BrownEspresso

Adobe WhiteIvoryPaprika British TanGingersnapCinnabar VicunaCamelOakTerra CottaCinnamon

PinkMauveTea RoseRaspberry Rouge Red SunsetRosalee Dark Cherry Shell PeachRose

American Beauty Tomato Mandarin OrangeClaretBurgundy GoldenrodGolden CornSun Yellow Bonanza GoldCandy Apple Red Nasturtium

Sand

Grape SurfDusty JadeNorthwoodsCrocusDeep VioletSangriaPlumDark PurpleConcord Dutch Blue

Bristol BlueWedgewoodSpace BlueRoyalRegimental BlueImperial Blue Sky Blue Capri BlueFjord Blue Turquoise Grotto

China Green Olive GreenForestYew Green Emerald Desert Camo*Gray Moss Woodland Camo*SageArtichokeAlpine

MAKE OUR EQUIPMENT YOUR OWN. Legend Fitness offers the largest standard color selection in the industry, with 30 standard powder coat colors to choose from for frames, attachments, and more. All of these wonderful shades and hues are available to you at no additional cost. Have something different in mind? Custom colors are available for an additional fee.

White

87 STANDARD HUES AND PATTERNS OF UPHOLSTERY. Our upholstery choices are stain- and chemical-resistant 32-ounce vinyl which is rated for marine duty, with the exception of the noted choices, which are constructed from a heavy duty synthetic fabric. When combined with our standard powder coat color options, there are thousands of ways to make Legend Fitness equipment your own.

THE LARGEST SELECTION OFSTANDARD COLORS IN THE INDUSTRY

Olympia WhiteCoffee Brown Stone Gray Storm GraySun GoldClear Coat

Reseda Green Evergreen Mint Green

Chocolate Brown

Signal Yellow Rush Green Yellow Submarine

Organic Orange Burnt Orange Wine Red Red Rock Mars Red

Textured BlackSilver VeinPlatinum Sparkle Ebony Chrome Jet BlackSlate Gray

Purple Lilac Purple WavePost Office Blue Patriot Blue Light Blue Pink HV

Due to print variations, the samples on this page should only be used as an approximation. If color choice is critical, please ask your Legend Fitness representative to have color samples sent to you.*These upholstery options are fabric and may not be as stain resistant as our Naugahyde options.

Doe

Page 4: WORLD CLASS STRENGTH EQUIPMENT MADE IN AMERICAlegendfitness.com/wp-content/uploads/legendfitness_8-2_lfadvantage.pdf3Includes end caps, end covers, grip ends, foam rubber grips, smooth

MORE OFFERINGS FROM

MORE THAN JUST TOP-OF-THE-LINE WEIGHT LIFTING EQUIPMENT. In addition to offering high-end equipment for weight lifting and athletic training, Legend Fitness has all you need to complete your facility, from the planning stages to completion. Be sure to ask your Legend Fitness rep for details on our expanded selection of products.

The most extensive cage configurator on the market, the Legend Fitness Build-A-Cage allows you to choose one of 15 cages and then add accessories, change colors, save, and even email your creations. The ultimate in visualizing the cage of your dreams.

Designing a training facility is no easy task, but it can be with the Legend Fitness Room Planner. Start with your own dimensions and add any and all of the pieces of Legend Fitness equipment your users desire. Design a functional space with minimal effort, and then save it to share.

Robust flooring is one of the most important parts of a workout facility. Legend Fitness has excellent partnerships with leaders in athletic flooring, plus installation experience. Whether you need rolled rubber, rubber tiles, or turf, let us help you meet your flooring needs.

Legend Fitness is a certified retailer of several popular brands of cardio equipment. From treadmills and ellipical machines to upright and recumbent cycles, and more, we can work with you to fill your space with top-of-the-line cardio equipment.

It should come as no suprise that we have relationships with some of the best weight manufacturers. When it comes to Olympic bars, free weights, kettlebells, medicine balls, and more, we can help you make sure everything is ready to go.

Without mirrors, users can’t see whether or not they are using the proper form, which can result in injury. Since safety is important to us, we work with mirror companies to make sure your facility has what it needs to help keep your users safe.

“After looking at several companies, it became obvious that Legend Fitness was a leader in the market. They were able to provide the exact equipment we needed to fit our space and our budget. Working with Legend enabled us to come up with the best possible solution for our students and athletes. We now have a facility that is dedicated to those looking for significant gains in the overall and sport-specific strength. By considering all aspects, Legend has created a facility that is appealing to our male and female users, and a showpiece for all of our visitors.” DAVID “GEORDIE” BROWN, ASSISTANT ATHLETIC DIRECTOR, COLLEGE OF WOOSTER

“We looked at every available manufacturer out there on the market, and what I needed was I needed someone who could take our design and customize it. And I also needed to know it was gonna look right, look well, because obviously this is not only a functional facility, it’s a facility where we’re gonna bring recruits in and show it off, as well as to boosters and to help us raise even more money. So we needed to look nice, needed to be functional, needed to work with our design and be strong and durable, and Legend Fitness was the one I was really drawn to because they provided all those factors for me. They made it look strong, I knew it was durable, and it looked nice, but they could customize and some companies were unable to do that. It’s far exceeded our expectations.” CHIP PUGH, MS, CSCS, SCCC, DIRECTOR OF STRENGTH & CONDITIONING, TENNESSEE TECH UNIVERSITY & USA WEIGHTLIFTING CLUB COACH

PAGE 7

BUILD-A-CAGE CONFIGURATOR ROOM PLANNER FLOORING

CARDIO EQUIPMENT WEIGHTS MIRRORS