worldwide standards plus issue 98-08 reproduced from ...weldingcode.com/uploads/1583485650.pdfapi...

Worldwide Standards Plus Issue 98-08Reproduced from Information Handling Services®Mon Oct 03 10:22:57 2005

Your results are based on the following search criteria: Organization: API

API 82-42 Influence of Loading Rate on Axially Loaded Pilesin Clay

API MPMS 1 Manual of Petroleum Measurement Standards Chapter1 - Vocabulary

API MPMS 2.2A Manual of Petroleum Measurement Standard Chapter2 - Tank Calibration Section 2A - Measurement andCalibration of Upright Cylindrical Tanks by theManual Tank Strapping Method First Edition; Supersedes STD 2550

API MPMS 2.2B Manual of Petroleum Measurement Standards Chapter2 - Tank Calibration Section 2B - Calibration ofUpright Cylindrical Tanks Using the OpticalReference Line Method First Edition; SupersedesSTD 2550; Erratum - 1990 R(1996)

API MPMS 2.7 Manual of Petroleum Measurement Standards Chapter2 - Tank Calibration Section 7 - Calibration ofBarge Tanks First Edition R(1996)

API MPMS 2.8A Manual of Petroleum Measurement Standards Chapter2 - Tank Calibration Section 8A - Calibration ofTanks on Ships and Oceangoing Barges FirstEdition R(1996)

API MPMS 2.8B Manual of Petroleum Measurement Standards Chapter2 - Tank Calibration Section 8B - RecommendedPractice for the Establishment of the Location ofthe Reference Gauge Point and the Gauge Height ofTanks on Marine Tank Vessels First Edition

API MPMS 3.1A Manual of Petroleum Measurement Standards Chapter3 - Tank Gauging Section 1A - Standard Practicefor the Manual Gauging of Petroleum and PetroleumProducts First Edition; Replaces STD 2545

API MPMS 3.1B Manual of Petroleum Measurement Standards Chapter3 - Tank Gauging Section 1B - Standard Practicefor Level Measurement of Liquid Hydrocarbons inStationary Tanks by Automatic Tank Gauging FirstEdition; Replaces STD 2545 R(1997)

API MPMS 3.2 Manual of Petroleum Measurement Standards Chapter3 - Tank Gauging Section 2 - Standard Practicefor Gauging Petroleum and Petroleum Products inTank Cars First Edition; Replaces STD 2545

API MPMS 3.3 Manual of Petroleum Measurement Standards Chapter3 - Tank Gauging Section 3 - Standard Practicefor Level Measurement of Liquid Hydrocarbons inStationary Pressurized Storage Tanks by AutomaticTank Gauging First Edition; Replaces STD 2545

API MPMS 3.4 Manual of Petroleum Measurement Standards Chapter3 - Tank Gauging Section 4 - Standard Practicefor Level Measurement of Liquid Hydrocarbons onMarine Vessels by Automatic Tank Gauging FirstEdition; Replaces STD 2545

API MPMS 3.5 Manual of Petroleum Measurement Standards Chapter3 - Tank Gauging; Section 5 - Standard Practicefor Level Measurement of Light HydrocarbonLiquids Onboard Marine Vessels by Automatic TankGauging First Edition

API MPMS 4.1 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 1 - IntroductionFirst Edition R(1993)

API MPMS 4.2 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 2 - Conventional Pipe


Provers First Edition; API STD 1101, 2531, 2533, 2534 R(1993)

API MPMS 4.3 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 3 - Small VolumeProvers First Edition R(1993)

API MPMS 4.4 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 4 - Tank ProversFirst Edition R(1993)

API MPMS 4.5 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 5 - Master-MeterProvers First Edition; Supercedes 1101, 2531, 2533, 2534 R(1993)

API MPMS 4.6 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 6 - PulseInterpolation First Edition; Supercedes 1101, 2531, 2533, 2534 R(1993)

API MPMS 4.7 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 7 - Field - StandardTest Measures First Edition; API STD 1101, 2531, 2533, 2534 R(1993)

API MPMS 4.8 Manual of Petroleum Measurement Standards Chapter4 - Proving Systems Section 8 - Operation ofProving Systems

API MPMS 5.1 Manual of Petroleum Measurement Standards Chapter5 - Metering Section 1 - General Considerationsfor Measurement by Meters Third Edition

API MPMS 5.2 Manual of Petroleum Measurement Standards Chapter5 - Liquid Metering Section 2 - Measurement ofLiquid Hydrocarbons by Displacement Meters SecondEdition R(1992)

API MPMS 5.2 (WITHDRAWN) Manual of Petroleum MeasurementStandards Chapter 5 - Liquid Metering Section 2 - Measurement of Liquid Hydrocarbons byDisplacement Meters Second Edition

API MPMS 5.3 Manual of Petroleum Measurement Standards Chapter5 - Metering Section 3 - Measurement of LiquidHydrocarbons by Turbine Meters

API MPMS 5.4 Manual of Petroleum Measurement Standards Chapter5 - Metering Section 4 - Accessory Equipment forLiquid Meters Third Edition; Errata - March 1996

API MPMS 5.5 Manual of Petroleum Measurement Standards Chapter5 - Metering Section 5 - Fidelity and Security ofFlow Measurement Pulsed-Data Transmission SystemsFirst Edition R(1997)

API MPMS 6.1 Manual of Petroleum Measurement Standards Chapter6 - Metering Assemblies Section 1 - LeaseAutomatic Custody Transfer (LACT) Systems SecondEdition R(1996)

API MPMS 6.2 Manual of Petroleum Measurement Standards Chapter6 - Metering Assemblies Section 2 - Loading-Rackand Tank-Truck Metering Systems for Non-LPGProducts

API MPMS 6.3 Manual of Petroleum Measurement Standards Chapter6 - Metering Assemblies Section 3 - ServiceStation Metered Fuel - Dispensing Systems

API MPMS 6.4 Manual of Petroleum Measurement Standards Chapter6 - Metering Section 4 - Metering Systems forAviation Fueling Facilities First Edition R(1996)

API MPMS 6.5 Manual of Petroleum Measurement Standards Chapter


6 - Metering Assemblies Section 5 - MeteringSystems for Loading and Unloading Marine BulkCarriers Second Edition R(1996)

API MPMS 6.6 Manual of Petroleum Measurement Standards Chapter6 - Metering Assemblies Section 6 - PipelineMetering Systems Second Edition

API MPMS 6.7 Manual of Petroleum Measurement Standards Chapter6 - Metering Assemblies Section 7 - MeteringViscous Hydrocarbons

API MPMS 7.1 Manual of Petroleum Measurement Standards Chapter7 - Temperature Determination Section 1 - StaticTemperature Determination Using Mercury-in-GlassTank Thermometers First Edition; Replaces STD2543

API MPMS 7.2 Manual of Petroleum Measurement Standards Chapter7 - Temperature Determination Section 2 - DynamicTemperature Determination Second Edition

API MPMS 7.3 Manual of Petroleum Measurement Standards Chapter7 - Temperature Determination Section 3 - StaticTemperature Determination Using PortableElectronic Thermometers First Edition

API MPMS 7.4 Manual of Petroleum Measurement Standards Chapter7 - Temperature Determination Section 4 - StaticTemperature Determination Using Fixed AutomaticTank Thermometers

API MPMS 8.1 Manual of Petroleum Measurement Standards Chapter8 - Sampling Section 1 - Standard Practice forManual Sampling of Petroleum and PetroleumProducts Third Edition; ASTM D4057

API MPMS 8.2 Manual of Petroleum Measurement Standards Chapter8 - Sampling Section 2 - Standard Practice forAutomatic Sampling of Liquid Petroleum andPetroleum Products Second Edition; ASTM D4177

API MPMS 8.3 Manual of Petroleum Measurement Standards Chapter8 - Sampling Section 3 - Standard Practice forMixing and Handling of Liquid Samples ofPetroleum and Petroleum Products First Edition; ASTM D5854

API MPMS 8.4 Manual of Petroleum Measurement Standards Chapter8 - Sampling Section 4 - Standard Practice forManual Sampling and Handling of Fuels forVolatility Measurement First Edition; ASTM D5842

API MPMS 9.1 Manual of Petroleum Measurement Standards Chapter9 - Density Determination Section 1 - HydrometerTest Method for Density, Relative Density (Specific Gravity), or API Gravity of CrudePetroleum and Liquid Petroleum Products ASTMD1298 - 80 R(1992)

API MPMS 9.2 Manual of Petroleum Measurement Standards Chapter9 - Density Determination Section 2 - PressureHydrometer Test Method for Density or RelativeDensity First Edition R(1992)

API MPMS 9.3 Manual of Petroleum Measurement Standards Chapter9 - Density Determination Section 3 - Thermohydrometer Test Method for Density andAPI Gravity of Crude Petroleum and LiquidPetroleum Products

API MPMS 10.1 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 1 - Determination


of Sediment in Crude Oils and Fuel Oils by theExtraction Method ASTM D473 R(1993)

API MPMS 10.2 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 2 - Determinationof Water in Crude Oil by the Distillation MethodASTM D4006 R(1993)

API MPMS 10.3 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 3 - Determinationof Water and Sediment in Crude Oil by theCentrifuge Method (Laboratory Procedure) ASTMD4007 R(1993)

API MPMS 10.4 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 4 - Determinationof Sediment and Water in Crude Oil by theCentrifuge Method (Field Procedure) ASTM D96-88R(1993)

API MPMS 10.5 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 5 - WaterDetermination in Petroleum Products andBituminous Materials by Distillation

API MPMS 10.6 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 6 - Determinationof Water and Sediment in Fuel Oils by theCentrifuge Method (Laboratory Procedure) SecondEdition; ASTM D1796

API MPMS 10.7 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 7 - Standard TestMethod for Water in Crude Oils by Karl FischerTitration (Volumetric) First Edition; ASTM D4377; IP 356/87; (R 1996)

API MPMS 10.8 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 8 - Standard TestMethod for Sediment in Crude Oil by MembraneFiltration First Edition; ASTM D 4807-88 R(1993)

API MPMS 10.9 Manual of Petroleum Measurement Standards Chapter10 - Sediment and Water Section 9 - Standard TestMethod for Water in Crude Oils by CoulometricKarl Fischer Titration

API MPMS 11.1 VOL I Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume I Table5A - Generalized Crude Oils and JP-4 Correctionof Observed API Gravity to API Gravity at 60Degrees F Table 6A - Generalized Crude Oils andJP-4 Correction of Volume to 60 Degrees F AgainstAPI Gravity at 60 Degrees F First Edition; ASTMD1250; IP 200; (R 1993)

API MPMS 11.1 VOL II Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume II Table5B - Generalized Products Correction of ObservedAPI Gravity to API Gravity at 60 Degrees F Table6B - Generalized Products Correction of Volume to60 Degrees F Against API Gravity at 60 Degrees FFirst Edition; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL III Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume III Table6C - Volume Correction Factors for Individual andSpecial Applications Volume Correction to 60Degrees F Against Thermal Expansion Coefficientsat 60 Degrees F First Edition; ASTM D1250; IP


200; Addendum - 1995 R(1993) API MPMS 11.1 VOL IV Manual of Petroleum Measurement Standards Chapter

11.1 - Volume Correction Factors Volume IV Table23A - Generalized Crude Oils Correction ofObserved Relative Density to Relative Density60/60 Degrees F Table 24A - Generalized CrudeOils Correction of Volume to 60 Degrees F AgainstRelative Density 60/60 Degrees F First Edition; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL V Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume V Table23B - Generalized Products Correction of ObservedRelative Density to Relative Density 60/60Degrees F Table 24B - Generalized ProductsCorrection of Volume to 60 Degrees F AgainstRelative Density 60/60 Degrees F First Edition; Errata - 1981 (ASTM D1250) (IP 200) (R 1993)

API MPMS 11.1 VOL VI Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume VI Table24C - Volume Correction Factors for Individualand Special Applications Volume Correction to 60Degrees F Against Thermal Expansion Coefficientsat 60 Degrees F First Edition; ASTM D1250; IP200; (R 1993)

API MPMS 11.1 VOL VII Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume VII Table53A - Generalized Crude Oils Correction ofObserved Density to Density at 15 Degrees C Table54A - Generalized Crude Oils Correction of Volumeto 15 Degrees C Against Density at 15 Degrees CFirst Edition; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL VIII Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume VIIITable 53B - Generalized Products Correction ofObserved Density to Density at 15 Degrees C Table54B - Generalized Products Correction of Volumeto 15 Degrees C Against Density at 15 Degrees CFirst Edition; Errata - 1981; ASTM D1250; IP200; (R 1993)

API MPMS 11.1 VOL IX Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume IX Table54C - Volume Correction Factors for Individualand Special Applications Volume Correction to 15Degrees C Against Thermal Expansion Coefficientsat 15 Degrees C First Edition; ASTM D1250; IP200; Addendum - 1995 R(1980)

API MPMS 11.1 VOL X Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume X - Background, Development, and ProgramDocumentation First Edition; EditorialAmplification; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL XI/XII (WITHDRAWN) Petroleum Measurement TablesIntraconversion between Volume Measures andDensity Measures; Volume XI - Tables 1, 2, 3, 4, 8, 9, 10, 11, 12, 13, and 14 Volume XII - Tables21, 22, 26, 27, 28, 29, 30, 31, 33, 34, 51, 52, 56, 57, and 58 ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL XIII Manual of Petroleum Measurement Standards Chapter11.1 - Volume Correction Factors Volume XIIITable 5D-Generalized Lubricating Oils Correction


of Observed API Gravity to API Gravity at 60Degrees F Table 6D-Generalized Lubricating OilsCorrection of Volume to 60 Degrees F Against APIGravity at 60 Degrees F ASTM D1250; (R 1993)

API MPMS 11.1 VOL XIV Manual of Petroleum Measurement Standards Chapter11.1-Volume Correction Factors, Volume XIV, Table53D- Generalized Lubricating Oils Correction ofObserved Density to Density at 15 Degrees C Table54D-Generalized Lubricating Oils Correction ofVolume to 15 Degrees C Against Density at 15Degrees C Errata - August 1982; ASTM D1250; (R1993)

API MPMS 11.2.1 Manual of Petroleum Measurement Standards Chapter11.2.1 - Compressibility Factors forHydrocarbons: 0-90 Degrees API Gravity Range

API MPMS 11.2.1M Manual of Petroleum Measurement Standards Chapter11.2.1M - Compressibility Factors forHydrocarbons: 638-1074 Kilograms per Cubic MetreRange Erratum - February 1985; (R 1996)

API MPMS 11.2.2 Manual of Petroleum Measurement Standards Chapter11.2.2 - Compressibility Factors forHydrocarbons: 0.350-0.637 Relative Density (60Degrees F/ 60 Degrees F) and -50 Degrees F to 140Degrees F Metering Temperature Second Edition; GPA 8286-86 R(1992)

API MPMS 11.2.2 ADDENDUM Manual of Petroleum Measurement Standards Chapter11 - Physical Properties Data Addendum to Section2, Part 2 - Compressibility Factors forHydrocarbons, Correlation of Vapor Pressure forCommercial Natural Gas Liquids First Edition; Errata 1996

API MPMS 11.2.2M Manual of Petroleum Measurement Standards Chapter11.2.2M - Compressibility Factors forHydrocarbons: 350-637 Kilograms per Cubic MetreDensity (15 Degrees C) and -46 Degrees C to 60Degrees C Metering Temperature GPA 8286M-86; (R1992)

API MPMS 11.2.3 Manual of Petroleum Measurement Standards Chapter11.2.3 - Water Calibration of Volumetric Provers

API MPMS 11.2.3M Manual of Petroleum Measurement Standards Chapter11.2.3M - Water Calibration of VolumetricProvers (R 1996)

API MPMS 12.1.1 Manual of Petroleum Measurement Standards Chapter12 - Calculation of Petroleum Quantities Section1 - Calculation of Static Petroleum QuantitiesPart 1 - Upright Cylindrical Tanks and MarineVessels First Edition; Errata April 24, 1997; Interim Report 4/24/1998

API MPMS 12.2 Manual of Petroleum Measurement Standards Chapter12 - Calculation of Petroleum Quantities Section2 - Calculation of Liquid Petroleum QuantitiesMeasured by Turbine or Displacement Meters

API MPMS 12.2.1 Manual of Petroleum Measurement Standards Chapter12 - Calculation of Petroleum Quantities Section2 - Calculation of Petroleum Quantities UsingDynamic Measurement Methods and VolumetricCorrection Factors Part 1 - Introduction SecondEdition

API MPMS 12.2.2 Manual of Petroleum Measurement Standards Chapter


12 - Calculation of Petroleum Quantities Section2 - Calculation of Petroleum Quantities UsingDynamic Measurement Methods and VolumetricCorrection Factors Part 2 - Measurement TicketsSecond Edition

API MPMS 12.2.4 Manual of Petroleum Measurement Standards Chapter12 - Calculation of Petroleum Quantities Section2 - Calculation of Petroleum Quantities UsingDynamic Measurement Methods and VolumetricCorrection Factors Part 4 - Calculation of BaseProver Volumes by the Waterdraw Method FirstEdition

API MPMS 12.3 Manual of Petroleum Measurement Standards Chapter12 - Calculation of Petroleum Quantities Section3 - Volumetric Shrinkage Resulting from BlendingLight Hydrocarbons with Crude Oils

API MPMS 13.1 Manual of Petroleum Measurement Standards Chapter13 - Statistical Aspects of Measuring andSampling Section 1 - Statistical Concepts andProcedures in Measurement

API MPMS 13.2 Manual of Petroleum Measurement Standards Chapter13 - Statistical Aspects of Measuring andSampling Section 2 - Methods of Evaluating MeterProving Data

API MPMS 14.1 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 1 - Collecting and Handling of Natural Gas Samplesfor Custody Transfer Fourth Edition

API MPMS 14.3.1 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 1 - General Equations and Uncertainty GuidelinesThird Edition; Errata - 1991; Errata - 1993; Replaces API MPMS 14.3; (R 1995)

API MPMS 14.3.2 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Mst. Section 3 - Concentric, Square-Edged Orifice Meters Part 2 - Spec. and Installation Requirements (AGA ReportNo. 3, Part 2 and GPA 8185-90, Part 2)

API MPMS 14.3.3 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 3 - Natural Gas Applications

API MPMS 14.3.4 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 4 - Background, Development, Implementation Proc. and Subroutine Doc. Third Edition; Replaces APIMPMS 14.3

API MPMS 14.4 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids andVapors to Equivalent Liquid Volumes First Edition

API MPMS 14.5 Calculation of Gross Heating Value, RelativeDensity and Compressibility Factor for NaturalGas Mixtures from Compositional Analysis GPA STD2172-96

API MPMS 14.6 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 6


- Continuous Density Measurement API MPMS 14.7 Manual of Petroleum Measurement Standards Chapter

14 - Natural Gas Fluids Measurement Section 7 - Mass Measurement of Natural Gas Liquids GPA STD8182-95

API MPMS 14.8 Manual of Petroleum Measurement Standards Chapter14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement SecondEdition

API MPMS 15 Manual of Petroleum Measurement Standards Chapter15 - Guidelines for the Use of the InternationalSystem of Units (SI) in the Petroleum and AlliedIndustries API PUBL 2564 R(1992)

API MPMS 16.2 Manual of Petroleum Measurement Standards Chapter16 - Measurement of Hydrocarbon Fluids by Weightor Mass Section 2 - Mass Measurement of LiquidHydrocarbons in Vertical Cylindrical StorageTanks by Hydrostatic Tank Gauging

API MPMS 17.1 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 1 - Guidelinesfor Marine Cargo Inspection

API MPMS 17.2 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 2 - Measurementof Cargoes on Board Tank Vessels

API MPMS 17.2A Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 2A - Closed andRestricted Systems

API MPMS 17.3 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 3 - Guidelinesfor Identification of the Source of Free WatersAssociated with Marine Petroleum Cargo MovementsFirst Edition; Errata - 1992 R(1997)

API MPMS 17.4 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 4 - Method forQuantification of Small Volumes on MarineVessels (OBQ/ROB)

API MPMS 17.5 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 5 - Guidelinesfor Cargo Analysis and Reconciliation

API MPMS 17.6 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 6 - Guidelinesfor Determining the Fullness of Pipelines betweenVessels and Shore Tanks

API MPMS 17.7 Manual of Petroleum Measurement Standards Chapter17 - Marine Measurement Section 7 - RecommendedPractices for Developing Barge Control Factors (Volume Ratio)

API MPMS 18.1 Manual of Petroleum Measurement Standards Chapter18 - Custody Transfer; Section 1 - MeasurementProcedures for Crude Oil Gathered From SmallTanks by Truck Second Edition

API MPMS 19.1 Manual of Petroleum Measurement Standards Chapter19 - Evaporative Loss Measurement Section 1 - Evaporative Loss from Fixed-Roof Tanks SecondEdition; Supersedes BULL 2518

API MPMS 19.1D Documentation File for API Manual of PetroleumMeasurement Standards Chapter 19.1 - EvaporativeLoss from Fixed Roof Tanks First Edition; Erratum - 1994; API Bulletin 2518


API MPMS 19.2 Manual of Petroleum Measurement Standards Chapter19 - Evaporative Loss Measurement; Section 2 - Evaporative Loss from Floating-Roof Tanks FirstEdition; Formerly, API Publications 2517 and 2519

API MPMS 19.3 PART A Manual of Petroleum Measurement Standards Chapter19.3 - Evaporative Loss Measurement Part A - WindTunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-RoofTanks First Edition

API MPMS 19.3 PART B Manual of Petroleum Measurement Standards Chapter19.3 - Evaporative Loss Measurement Part B - AirConcentration Test Method - Rim-Seal Loss Factorsfor Floating-Roof Tanks First Edition

API MPMS 19.3 PART E Manual of Petroleum Measurement Standards Chapter19.3 - Evaporative Loss Measurement; Part E - Weight Loss Test Method for the Measurement ofDeck-Fitting Loss Factors for Internal Floating-Roof Tanks First Edition

API MPMS 19.3 PART F Manual of Petroleum Measurement Standards Chapter19.3 - Evaporative Loss Measurement; Part F - Evaporative Loss Factor for Storage TanksCertification Program First Edition

API MPMS 19.3 PART G Manual of Petroleum Measurement Standards Chapter19.3 - Evaporative Loss Measurement; Part G - Certified Loss Factor Testing LaboratoryRegistration First Edition

API MPMS 19.4 Manual of Petroleum Measurement Standards Chapter19.4 - Recommended Practice for Specification ofEvaporative Losses First Edition

API MPMS 20.1 Manual of Petroleum Measurement Standards Chapter20 - Allocation Measurement Section 1 - Allocation Measurement

API MPMS 21.1 Manual of Petroleum Measurement Standards Chapter21 - Flow Measurement Using Electronic MeteringSystems Section 1 - Electronic Gas Measurement

API MPMS COMP Manual of Petroleum Measurement Standards Chapter11.2.1 and 11.2.1M; Chapter 11.2.3 and 11.2.3M; Computer Tape Information and DocumentationErratum - October 1984

API RP T-1 Orientation Programs for Personnel Going Offshorefor the First Time Fourth Edition

API RP T-4 Training of Offshore Personnel in NonoperatingEmergencies Second Edition

API (WITHDRAWN) Vocational Training - Book 4 - WellTesting Second Edition R(1986)

API RP T-7 Training of Personnel in Rescue of Persons inWater Second Edition

API Vocational Training - Book 1 - Introduction toOil and Gas Production Fifth Edition

API Vocational Training - Book 2 - Corrosion of Oil- and Gas-Well Equipment Second Edition

API Vocational Training - Book 3 - Subsurface SaltWater Injection and Disposal Third Edition

API Vocational Training - Book 5 - WirelineOperations and Procedures Third Edition

API Vocational Training - Book 6 - Gas Lift ThirdEdition

API PUBL 1200 Federally Mandated Training and Information Third


Edition API PUBL 1210 Trainer Competencies API Central Committee on

Training and Development First Edition API TR 10TR2 Shrinkage and Expansion in Oilwell Cements First

Edition API 1986 Interpretations - Technical Publications

Answers to Technical Inquiries API 1988 Interpretations - Technical Publications

Answers to Technical Inquiries API 1989 and 1990 Interpretations - Technical

Publications Answers to Technical Inquiries API 1991 Interpretations - Technical Publications



Answers to Technical Inquiries API 1994 and 1995 Interpretations - Technical

Publications Answers to Technical Inquiries API BULL E1 Bulletin on the Generic Hazardous Chemical

Category List and Inv. for the Oil and GasExploration and Production Ind. SuperfundAmendments and Reauthorization Act of 1986, Emer. Planning & Comm. Right-to-Know Act, TitleIII Sec. 311 and 312

API SPEC Q1 Specification for Quality Programs API Cumulative Impact of Environmental Regulations on

the U.S. Petroleum Refining, Transportation andMarketing Industries

API API S1 Organization and Procedures for Standardizationof Oilfield Equipment and Materials NineteenthEdition

API TR IOSC-001 1995 International Oil Spill ConferenceImplementing an Effective Response ManagementSystem

API Companies Licensed to Use the API Monogram andAPIQR ISO 9000 Registration Mark Volume 6, Number2

API SPEC 1B Specification for Oil-Field V-Belt API BULL E2 Bulletin on Management of Naturally Occurring

Radioactive Materials (NORM) in Oil & GasProduction

API TR IOSC-002 1995 International Oil Spill Conference Use andMisuse of Science in Natural Resource DamageAssessment

API RP 2A-LRFD Recommended Practice for Planning, Designing andConstructing Fixed Offshore Platforms - Load andResistance Factor Design First Edition; Errata - October 1993; Supplement 1 - February 1997

API RP 2A-WSD Recommended Practice for Planning, Designing andConstructing Fixed Offshore Platforms - WorkingStress Design Twentieth Edition; Supplement1-1996

API SPEC 2B Specification for the Fabrication of StructuralSteel Pipe

API SPEC 2C Specification for Offshore Cranes API RP 2D Recommended Practice for Operation and

Maintenance of Offshore Cranes


API SPEC 2F Specification for Mooring Chain Sixth Edition API RP 2FP1 (WITHDRAWN) Recommended Practice for Design,

Analysis, and Maintenance of Moorings forFloating Production Systems First Edition; Replaced by RP 2SK

API SPEC 2H Specification for Carbon Manganese Steel Platefor Offshore Platform Tubular Joints

API RP 2I In-Service Inspection of Mooring Hardware forFloating Drilling Units Second Edition

API RP 2L Recommended Practice for Planning, Designing, andConstructing Heliports for Fixed OffshorePlatforms

API RP 2M Recommended Practice for Qualification Testing ofSteel Anchor Designs for Floating Structures

API SPEC 2MT1 Specification for As-Rolled Carbon ManganeseSteel Plate with Improved Toughness for OffshoreStructures

API RP 2N Recommended Practice for Planning, Designing, andConstructing Structures and Pipelines for ArcticConditions

API RP 2P Recommended Practice for the Analysis of SpreadMooring Systems for Floating Drilling Units

API RP 2R Recommended Practice for Design, Rating, andTesting of Marine Drilling Riser Couplings

API 2S Design of Windlass Wildcats for Floating OffshoreStructures Second Edition

API RP 2SK Recommended Practice for Design and Analysis ofStationkeeping Systems for Floating StructuresSecond Edition; Replaces RP 2FP1

API RP 2T Recommended Practice for Planning, Designing, andConstructing Tension Leg Platforms Second Edition

API BULL 2U Bulletin on Stability Design of CylindricalShells

API BULL 2V Bulletin on Design of Flat Plate Structures API SPEC 2W Specification for Steel Plates for Offshore

Structures, Produced by Thermo-Mechanical ControlProcessing (TMCP)

API RP 2X Recommended Practice for Ultrasonic and MagneticExamination of Offshore Structural Fabricationand Guidelines for Qualification of Technicians

API SPEC 2Y Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures Third Edition

API RP 2Z Recommended Practice for PreproductionQualification for Steel Plates for OffshoreStructures

API BULL E3 Environmental Guidance Document: Well Abandonmentand Inactive Well Practices for U.S. Explorationand Production Operations

API National Used Oil Collection Study Addendum - August 1997

API TR IOSC-003 1995 International Oil Spill ConferencePerspectives on Establishing and Maintaining OilPollution Response Capabilities

API Onshore Solid Waste Management in Exploration andProduction Operations

API BULL E4 Environmental Guidance Document: ReleaseReporting for the Oil and Gas Exploration andProduction Industry as Required by the CWA,


CERCLA, and SARA Title III First Edition API SPEC 4F Specification for Drilling and Well Servicing

Structures API RP 4G Recommended Practice for Maintenance and Use of

Drilling and Well Servicing Structures API Proceedings of the 1990 API Pipeline Conference API API E5 Environmental Guidance Document: Waste Management

in Exploration and Production Operations SecondEdition

API BULL 5A2 Bulletin on Thread Compounds for Casing, Tubing, and Line Pipe Sixth Edition; Superseded by RP 5A3

API RP 5A3 Recommended Practice on Thread Compounds forCasing, Tubing, and Line Pipe First Edition; Supersedes Bull 5A2

API RP 5A5 Field Inspection of New Casing, Tubing, and PlainEnd Drill Pipe Sixth Edition

API SPEC 5B Specification for Threading, Gauging, and ThreadInspection of Casing, Tubing, and Line PipeThreads (U.S. Customary Units) FourteenthEdition; Errata 4/9/1998

API RP 5B1 Gauging and Inspection of Casing, Tubing, andLine Pipe Threads Fourth Edition

API RP 5C1 Recommended Practice for Care and Use of Casingand Tubing

API BULL 5C2 Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe

API BULL 5C3 Bulletin on Formulas and Calculations forCasing, Tubing, Drill Pipe and Line PipeProperties

API BULL 5C4 Bulletin on Round Thread Casing Joint Strengthwith Combined Internal Pressure and Bending

API RP 5C5 Recommended Practice for Evaluation Proceduresfor Casing and Tubing Connection Second Edition

API RP 5C6 Welding Connections to Pipe First Edition API RP 5C7 Coiled Tubing Operations in Oil and Gas Well

Services First Edition API SPEC 5CT Specification for Casing and Tubing (U.S.

Customary Units) Fifth Edition; Errata 04/01/1995 API SPEC 5CT (METRIC) Specification for Casing and Tubing (Metric

Units) Fifth Edition API SPEC 5D Specification for Drill Pipe API SPEC 5L Specification for Line Pipe Forty-First Edition API RP 5L1 Recommended Practice for Railroad Transportation

of Line Pipe Fifth Edition API RP 5L2 Recommended Practice for Internal Coating of Line

Pipe for Non-Corrosive Gas Transmission Service API RP 5L3 Recommended Practice for Conducting Drop-Weight

Tear Tests on Line Pipe API RP 5L7 Recommended Practices for Unprimed Internal

Fusion Bonded Epoxy Coating of Line Pipe API RP 5L8 Recommended Practice for Field Inspection of New

Line Pipe Second Edition API SPEC 5LC Specification for CRA Line Pipe API SPEC 5LD Specification for CRA Clad or Lined Steel Pipe API RP 5LW Recommended Practice for Transportation of Line

Pipe on Barges and Marine Vessels Second Edition API STD 5T1 Standard on Imperfection Terminology Tenth


Edition; Formerly Bull 5T1 API MF 5U01 Model Form of Voluntary Unit Agreement Fourth

Edition API MF 5U02 Model Form of Voluntary Unit Operating Agreement

Fourth Edition API MF 5U03 Model Form of Statutory Unit Agreement Second

Edition API MF 5U04 Model Form of Statutory Unit Operating Agreement

Second Edition API MF 5UO5 (WITHDRAWN) Model Form of Offshore Operating

Agreement Second Edition API Proceedings of the 1990 API Pipeline Cybernetics

Symposium API SPEC 6A Specification for Wellhead and Christmas Tree

Equipment API BULL 6AF Technical Report on Capabilities of API Flanges

under Combinations of Load Second Edition API BULL 6AF1 Bulletin on Temperature Derating of API Flanges

under Combination of Loading First Edition API BULL 6AF2 Bulletin on Capabilities of API Integral Flanges

under Combination of Loading - Phase II FirstEdition

API 6AM Technical Report on Material Toughness SecondEdition; Formerly Bulletin 6AM

API BULL 6AR Recommended Practice for Repair and Remanufactureof Wellhead and Christmas Tree Equipment

API SPEC 6AV1 Specification for Verification Test of WellheadSurface Safety Valves and Underwater SafetyValves for Offshore Service First Edition

API SPEC 6D Specification for Pipeline Valves (Gate, Plug, Ball, and Check Valves)

API BULL 6F1 Bulletin on Performance of API and ANSI EndConnections in a Fire Test According to APISpecification 6FA

API BULL 6F2 Bulletin on Fire Resistance Improvements for APIFlanges

API SPEC 6FA Specification for Fire Test for Valves API SPEC 6FB API Specification for Fire Test for End

Connections API SPEC 6FC Specification for Fire Test for Valves with

Automatic Backseats API SPEC 6FD Specification for Fire Test for Check Valves API SPEC 6H Specification on End Closures, Connectors and

Swivels API BULL 6J Bulletin on Testing of Oilfield Elastomers - A

Tutorial API BULL 6RS Bulletin on Referenced Standards for Committee

6, Standardization of Valves and WellheadEquipment

API Proceedings of the 1994 API Tanker ConferenceImage - A Global Maritime Mission

API SPEC 7 Specification for Rotary Drill Stem ElementsThirty-Ninth Edition

API RP 7A1 Recommended Practice for Testing of ThreadCompound for Rotary Shouldered Connections

API SPEC 7B-11C Specification for Internal-CombustionReciprocating Engines for Oil-Field Service

API RP 7C-11F Recommended Practice for Installation,


Maintenance, and Operation of Internal-CombustionEngines

API SPEC 7F Specification for Oil-Field Chain and Sprockets API RP 7G Recommended Practice for Drill Stem Design and

Operating Limits API SPEC 7K Specification for Drilling Equipment Second

Edition; Errata 4/20/1998 API RP 7L Procedures for Inspection, Maintenance, Repair,

and Remanufacture of Drilling Equipment API Product/Service Certification in the Exploration

& Production Sector of the Worldwide Oil and GasIndustry Needs Assessment Survey Report

API BULL D8 Tabular Method for Determining the Change of theOverall Angle and Dog-Leg Severity (for HoleInclinations up to 70 Degrees)

API SPEC 8A Specification for Drilling and ProductionHoisting Equipment Thirteenth Edition

API RP 8B Recommended Practice for Procedures forInspections, Maintenance, Repair, andRemanufacture of Hoisting Equipment Sixth Edition

API SPEC 8C Specification for Drilling and ProductionHoisting Equipment (PSL 1 and PSL 2) ThirdEdition

API Summary of U.S. Occupational Injuries, Illnesses, and Fatalities in the PetroleumIndustry

API SPEC 9A Specification for Wire Rope API RP 9B Recommended Practice on Application, Care, and

Use of Wire Rope for Oil Field Service API Worldwide Cementing Practices First Edition (R

1995) API BULL D10 Selecting Rotary Drilling Equipment, Procedure

for API SPEC 10 Specification for Materials and Testing for Well

Cements API SPEC 10A Specification for Cements and Materials for Well

Cementing API RP 10B Recommended Practice for Testing Well Cements

Twenty-Second Edition API SPEC 10D Specification for Bow-Spring Casing Centralizers API RP 10E Recommended Practice for Application of Cement

Lining to Steel Tubular Goods, Handling, Installation and Joining Third Edition; ISO 10409

API RP 10F Recommended Practice for Performance Testing ofCementing Float Equipment

API TR 10TR1 Cement Sheath Evaluation API RP 11AR Recommended Practice for Care and Use of

Subsurface Pumps API SPEC 11AX Specification for Subsurface Sucker Rod Pumps and

Fittings API SPEC 11B Specification for Sucker Rods Twenty-Sixth

Edition API RP 11BR Recommended Practice for Care and Handling of

Sucker Rods Eighth Edition; Supplement 110-1-1990; Supplement 2 7-1-1991

API SPEC 11E Specification for Pumping Units API RP 11ER Recommended Practice for Guarding of Pumping


Units API RP 11G Recommended Practice for Installation and

Lubrication of Pumping Units API BULL 11K Bulletin Data Sheet for the Design of Air

Exchange Coolers API RP 11L Recommended Practice for Design Calculations for

Sucker Rod Pumping Systems (Conventional Units) API BULL 11L2 Catalog of Analog Computer Dynamometer Cards API BULL 11L3 Sucker Rod Pumping System Design Book Errata

- November 1973, Supplement 1 - 1977 (R 1994) API BULL 11L4 Curves for Selecting Beam Pumping Units API BULL 11L5 Bulletin on Electric Motor Performance Data

Request Form API SPEC 11L6 Specification for Electric Motor Prime Mover for

Beam Pumping Unit Service First Edition; Supplement 1 1996

API SPEC 11N Specification for Lease Automatic CustodyTransfer (LACT) Equipment

API SPEC 11P Specification for Packaged ReciprocatingCompressors for Oil and Gas Production Services

API RP 11PGT Recommended Practice for Packaged Combustion GasTurbines

API RP 11S Recommended Practice for the Operation, Maintenance and Troubleshooting of ElectricSubmersible Pump Installations

API RP 11S1 Recommended Practice for Electrical SubmersiblePump Teardown Report Third Edition

API RP 11S2 Recommended Practice for Electric SubmersiblePump Testing Second Edition; Effective Date: 10/01/1997

API RP 11S3 Recommended Practice for Electric SubmersiblePump Installations First Edition; Formerly API RP11R

API RP 11S4 Recommended Practice for Sizing and Selection ofElectric Submersible Pump Installations FirstEdition; Replaces API RP 11U

API RP 11S5 Recommended Practice for Application of ElectricSubmersible Cable Systems

API RP 11S6 Recommended Practice for Testing of ElectricSubmersible Pump Cable Systems

API RP 11S7 Recommended Practice on Application and Testingof Electric Submersible Pump Seal ChamberSections

API RP 11S8 Recommended Practice on Electric Submersible PumpSystem Vibrations

API RP 11T Recommended Practice for Installation andOperation of Wet Steam Generators

API SPEC 11V1 Specification for Gas Lift Equipment API RP 11V2 Recommended Practice for Gas Lift Valve

Performance Testing API RP 11V5 Recommended Practice for Operation, Maintenance,

and Trouble-Shooting of Gas Lift Installations API RP 11V6 Recommended Practice for Design of Continuous

Flow Gas Lift Installations Using InjectionPressure Operated Valves First Edition; Errata - 1994

API RP 11V7 Recommended Practice for Repair, Testing, andSetting Gas Lift Valves


API SPEC 12B Specification for Bolted Tanks for Storage ofProduction Liquids

API SPEC 12D Specification for Field Welded Tanks for Storageof Production Liquids

API SPEC 12F Specification for Shop Welded Tanks for Storageof Production Liquids

API SPEC 12GDU Specification for Glycol-Type Gas DehydrationUnits

API SPEC 12J Specification for Oil and Gas Separators API SPEC 12K Specification for Indirect Type Oil-Field Heaters API SPEC 12L Specification for Vertical and Horizontal

Emulsion Treaters API RP 12N Recommended Practice for the Operation,

Maintenance and Testing of Firebox FlameArrestors

API SPEC 12P Specification for Fiberglass Reinforced PlasticTanks

API RP 12R1 Recommended Practice for Setting, Maintenance, Inspection, Operation and Repair of Tanks inProduction Service Fifth Edition; EffectiveDate: 10/01/1997

API SPEC 13A Specification for Drilling-Fluid Materials API RP 13B-1 Recommended Practice Standard Procedure for Field

Testing Water-Based Drilling Fluids SecondEdition

API RP 13B-2 Recommended Practice Standard Procedure for FieldTesting Oil-Based Drilling Fluids Third Edition

API RP 13C Recommended Practice for Drilling FluidProcessing Systems Evaluation

API RP 13D Recommended Practice on the Rheology andHydraulics of Oil-Well Drilling Fluids

API RP 13E Recommended Practice for Shale Shaker ScreenCloth Designation

API RP 13G Recommended Practice Standard Procedure forDrilling Mud Report Form

API RP 13I Recommended Practice Standard Procedure forLaboratory Testing Drilling Fluids Supplement 1 - July 1996; Supplement 2 - June 1997

API RP 13J Testing of Heavy Brines API RP 13K Recommended Practice for Chemical Analysis of

Barite Second Edition; Errata 4/25/1998 API BULL D14 Statistical Analysis of Crude Oil Recovery and

Recovery Efficiency API SPEC 14A Specification for Subsurface Safety Valve

Equipment API RP 14B Design, Installation, Repair and Operation of

Subsurface Safety Valve Systems Fourth Edition; ISO 10417; Errata - 1996

API RP 14C Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface SafetySystems for Offshore Production Platforms SixthEdition

API SPEC 14D Specification for Wellhead Surface Safety Valvesand Underwater Safety Valves for Offshore Service

API RP 14E Recommended Practice for Design and Installationof Offshore Production Platform Piping Systems

API RP 14F Recommended Practice for Design and Installation


of Electrical Systems for Offshore ProductionPlatforms

API RP 14G Recommended Practice for Fire Prevention andControl on Open Type Offshore ProductionPlatforms

API RP 14H Recommended Practice for Installation, Maintenance and Repair of Surface Safety Valvesand Underwater Safety Valves Offshore FourthEdition; ISO 10419

API RP 14J Recommended Practice for Design and HazardsAnalysis for Offshore Production Facilities

API SPEC 15HR Specification for High Pressure Fiberglass LinePipe

API SPEC 15LE Specification for Polyethylene Line Pipe (PE) API SPEC 15LR Specification for Low Pressure Fiberglass Line

Pipe API SPEC 15LT Specification for PVC Lined Steel Tubular Goods API RP 15TL4 Recommended Practice for Care and Use of

Fiberglass Tubulars API BULL D16 Suggested Procedure for Development of Spill

Prevention Control and Countermeasure Plans (ToAssist Conformance to Requirements of Title 40, Code of Federal Regulations, Part 112.)

API DR 16 Analysis of Foods for Benzene API SPEC 16A Specification for Drill Through Equipment Second

Edition API SPEC 16C Specification for Choke and Kill Systems API SPEC 16D Specification for Control Systems for Drilling

Well Control Equipment API RP 16E Recommended Practice for Design of Control

Systems for Drilling Well Control Equipment API BULL 16J Bulletin on Comparison of Marine Drilling Riser

Analyses First Edition; Formerly Bull 2J API RP 16Q Recommended Practice for Design, Selection,

Operation and Maintenance of Marine DrillingRiser Systems First Edition; Formerly RP 2Q andRP 2K

API SPEC 16R Specification for Marine Drilling Riser CouplingsFirst Edition

API RP 17A Recommended Practice for Design and Operation ofSubsea Production Systems

API RP 17B Recommended Practice for Flexible Pipe FirstEdition

API RP 17C Recommended Practice on TFL (Through Flowline) Systems First Edition

API SPEC 17D Specification for Subsea Wellhead and ChristmasTree Equipment First Edition; Supplement 1 - 1993; Supplement 2 - 1996

API SPEC 17E Specification for Subsea Production ControlUmbilicals Second Edition

API RP 17G Recommended Practice for Design and Operation ofCompletion/Workover Riser Systems First Edition

API RP 17I Installation Guidelines for Subsea UmbilicalsFirst Edition

API SPEC 17J Specification for Unbonded Flexible Pipe FirstEdition

API DR 21 API Mineral Oil Review API RP 31A Standard Form for Hardcopy Presentation of


Downhole Well Log Data First Edition API RP 40 Recommended Practices for Core Analysis Second

Edition API RP 41 Recommended Practice for Presenting Performance

Data on Cementing and Hydraulic FracturingEquipment Second Edition

API RP 42 Laboratory Testing of Surface Active Agents forWell Stimulation, Recm. Practice for

API RP 43 Recommended Practices for Evaluation of WellPerforators Fifth Edition

API RP 50 Natural Gas Processing Plant Practices forProtection of the Environment Second Edition

API RP 51 Onshore Oil and Gas Production Practices forProtection of the Environment Second Edition

API RP 52 Land Drilling Practices for Protection of theEnvironment Second Edition

API RP 53 Blowout Prevention Equipment Systems for DrillingWells Third Edition

API PUBL DR53 Characterization of Exploration and ProductionAssociated Waste

API RP 54 Recommended Practices for Occupational Safety forOil and Gas Well Drilling and ServicingOperations Second Edition

API RP 55 Recommended Practices for Oil and Gas Producingand Gas Processing Plant Operations InvolvingHydrogen Sulfide Second Edition

API RP 56 Recommended Practices for Testing Sand Used inHydraulic Fracturing Operations Second Edition

API RP 58 Recommended Practices for Testing Sand Used inGravel Packing Operations Second Edition

API RP 60 Recommended Practices for Testing High-StrengthProppants Used in Hydraulic Fracturing OperationsSecond Edition

API RP 63 Recommended Practices for Evaluation of PolymersUsed in Enhanced Oil Recovery Operations FirstEdition

API RP 64 Recommended Practices for Diverter SystemsEquipment and Operations First Edition

API RP 66 Recommended Practices for Exploration andProduction Data Digital Interchange SecondEdition

API RP 67 Recommended Practices for Oilfield ExplosivesSafety First Edition

API RP 68 Recommended Practice for Oil and Gas WellServicing and Workover Operations InvolvingHydrogen Sulfide First Edition

API RP 75 Recommended Practices for Development of a Safetyand Environmental Management Program for OuterContinental Shelf (OCS) Operations and FacilitiesFirst Edition: 1996 Summary Report

API DR 148 Identification of Organic Toxicants in TreatedRefinery Effluents

API DR 218 Pilot Study in Los Angeles to Measure PersonalOzone Exposures During Scripted ActivitiesAppendices

API DR 220 Potential BTEX Emissions from the Nation'sTriethylene Glycol Units in Oil and Natural GasFacilities


API PUBL 300 Generation and Management of Wastes and SecondaryMaterials in the Petroleum Refining Industry: 1987-1988

API PUBL 301 Aboveground Storage Tank Survey API PUBL 302 Waste Minimization in the Petroleum Industry

Source Reduction Recycle Treatment Disposal aCompendium of Practices

API PUBL 303 Generation and Management of Wastes and SecondaryMaterials

API PUBL 304 Evaluation of Restoration Alternatives forNatural Resources Injured by Oil Spills

API PUBL 305 Protecting Agricultural Crops from OzoneExposures Key Issues and Future ResearchDirections

API PUBL 306 An Engineering Assessment of Volumetric Methodsof Leak Detection in Aboveground Storage Tanks

API PUBL 307 Engineering Assessment of Acoustic Methods ofLeak Detection in Aboveground Storage Tanks

API PUBL 309 Current Status and Research Needs Related toBiogenic Hydrocarbons

API PUBL 310 Analysis of Refinery Screening Data API PUBL 311 Environmental Design Considerations for Petroleum

Refining Crude Processing Units API PUBL 312 Responding to Environmental Challenge A

Discussion Among People from Industry, Governmentand Environmental Groups

API PUBL 313 Petroleum Emission Factor Information RetrievalSystem (PEFIRS)

API PUBL 315 Assessment of Tankfield Dike Lining Materials andMethods

API PUBL 316 Identifying and Measuring Nonuse Values forNatural and Environmental Resources a CriticalReview of the State of the Art

API PUBL 317 Industry Experience with Pollution PreventionPrograms

API PUBL 318 Land Treatment Practices in the PetroleumIndustry

API PUBL 322 Engineering Evaluation of Acoustic Methods ofLeak Detection in Aboveground Storage Tanks

API PUBL 323 Engineering Evaluation of Volumetric Methods ofLeak Detection in Aboveground Storage Tanks

API PUBL 324 Generation and Management of Residual MaterialsPetroleum Refining Performance 1990 Survey

API PUBL 325 Evaluation of a Methodology for the Detection ofLeaks in Aboveground Storage Tanks

API PUBL 326 Cost Effectiveness of VOC and NOx EmissionControl Measures

API PUBL 327 Aboveground Storage Tank Standards: A Tutorial API PUBL 328 Laboratory Evaluation of Candidate Liners for

Secondary Containment of Petroleum Products API PUBL 329 Generation and Management of Residual Materials

Petroleum Refining Performance 1991 Survey API PUBL 331 Environmental Performance Indicators: Methods for

Measuring Pollution Prevention API PUBL 332 Comparison of Screening Values from Selected

Hydrocarbon Screening Instruments API PUBL 333 Generation and Management of Residual Materials


API PUBL 334 Guide to Leak Detection for Aboveground StorageTanks

API PUBL 335 Refinery MACT Workshop July 11-12, 1996 API PUBL 336 Management of Residual Materials: 1994 Petroleum

Refining Performance API PUBL 337 Development of Emission Factors for Leaks in

Refinery Components in Heavy Liquid Service API PUBL 338 Summary of Question and Answer Sessions for the

American Petroleum Institute's GasolineDistribution MACT Workshop

API PUBL 339 Management of Residual Materials: 1995 PetroleumRefining Performance

API PUBL 340 Liquid Release Prevention and Detection Measuresfor Aboveground Storage Facilities

API PUBL 341 Survey of Diked-Area Liner Use at AbovegroundStorage Tank Facilities

API DR 351 Proceedings: Workshop to Identify PromisingTechnologies for the Treatment of Produced WaterToxicity

API TR400 Preliminary Study of the Effect of Toluene onPregnancy of the Rat (Inhalation Exposure)

API TR401 Toluene the Effect on Pregnancy of the Rat (Inhalation Exposure)

API TR 402 Tertiary-Amyl Methyl Ether (TAME) Toxicity to theFreshwater Alga Selenastrum Capricornutum

API TR 403 Closed-Patch Repeated Insult Dermal SensitizationStudy of Tertiary Amyl Methyl Ether (TAME) inGuinea Pigs (Buehler Method)

API TR 404 Inhalation Oncogenicity Study of CommercialHexane in Rats and Mice Part I - Rats FinalAbridged Report

API TR 405 Inhalation Oncogenicity Study of CommercialHexane in Rats and Mice Part II - Mice FinalAbridged Report

API TR 406 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity toDaphnids (Daphnia Magna) Under Flow- ThroughConditions TSCA Guideline Section Mark 797.1300

API TR 407 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity toMysid Shrimp (Mysidopsis Bahia) Under StaticRenewal Conditions TSCA Guideline Section Mark797.1930

API TR 408 Tert-Amyl Methyl Ether (TAME) - Acute Toxicity toRainbow Trout (Oncorhynchus Mykiss) Under Flow-Through Conditions TSCA Guideline Section Mark797.1400

API TR 409 Primary Skin Irritation Study In Rabbits of: API91-01 and PS-6 Unleaded Test Gasolines (CAISAbstract No. 42-2014)

API TR410 Chromosome Aberrations in Chinese Hamster Ovary (CHO) Cells Exposed to Tertiary Amyl MethylEther (TAME)

API TR411 Chinese Hamster Ovary (CHO)/HGPRT Mutation Assayof Tertiary Amyl Methyl Ether (TAME)

API PUBL 421 Monographs on Refinery Environmental Control - Management of Water Discharges Design andOperation of Oil-Water Separators First Edition

API PUBL 422 Groundwater Protection Programs for PetroleumRefining and Storage Facilities: A Guidance


Document API RP 500 Recommended Practice for Classification of

Locations for Electrical Installations atPetroleum Facilities Classified as Class I, Division 1 and Division 2 Second Edition

API RP 505 Recommended Practice for Classification ofLocations for Electrical Installations atPetroleum Facilities Classified as Class I, Zone0, Zone 1, and Zone 2 First Edition

API API 510 Pressure Vessel Inspection Code: MaintenanceInspection, Rating, Repair, and Alteration EighthEdition

API RP 520 PT I Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part I - Sizingand Selection

API RP 520 PT II Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II - Installation

API RP 521 Guide for Pressure-Relieving and DepressuringSystems Fourth Edition

API STD 526 Flanged Steel Pressure Relief Valves API STD 527 Seat Tightness of Pressure Relief Valves API STD 530 Calculation of Heater-Tube Thickness in Petroleum

Refineries API RP 531M Measurement of Noise from Fired Process Heaters API PUBL 534 Heat Recovery Steam Generators First Edition API PUBL 535 Burners for Fired Heaters in General Refinery

Services First Edition API RP 540 Electrical Installations in Petroleum Processing

Plants API STD 541 Form-Wound Squirrel Cage Induction Motors - 250

Horsepower and Larger API STD 546 Brushless Synchronous Machines - 500 kVA and

Larger Second Edition API RP 551 Process Measurement Instrumentation API RP 552 Transmission Systems API RP 554 Process Instrumentation and Control API TP 555 Process Analyzers First Edition API RP 556 Instrumentation and Control Systems for Fired

Heaters and Steam Generators First Edition API STD 560 Fired Heaters for General Refinery Services API 570 Piping Inspection Code; Inspection, Repair,

Alteration, and Rerating of In-Service PipingSystems First Edition; Supplement 1, 01-1995

API RP 572 Inspection of Pressure Vessels API RP 573 Inspection of Fired Boilers and Heaters API RP 574 Inspection of Piping, Tubing, Valves, and

Fittings First Edition; Replaces Guide forInspection of Refinery Equipment Chapter XI

API RP 575 Inspection of Atmospheric and Low-PressureStorage Tanks

API RP 576 Inspection of Pressure-Relieving Devices FirstEdition

API STD 589 Fire Test for Evaluation of Valve Stem Packing API STD 590 Steel Line Blanks API RP 591 User Acceptance of Refinery Valves Second Edition API STD 594 Check Valves: Wafer, Wafer-Lug, and Double


Flanged Type Fifth Edition API STD 598 Valve Inspection and Testing Seventh Edition;

Errata August 22,1997 API STD 599 Metal Plug Valves - Flanged and Welding Ends

Fourth Edition API STD 600 Steel Gate Valves - Flanged and Butt-Welding

Ends, Bolted and Pressure Seal Bonnets TenthEdition

API STD 602 Compact Steel Gate Valves - Flanged, Threaded, Welding, and Extended-Body Ends

API STD 603 Class 150, Cast, Corrosion-Resistant, Flanged-EndGate Valves Fifth Edition R(1996)

API STD 607 Fire Test for Soft-Seated Quarter-Turn ValvesFourth Edition

API STD 608 Metal Ball Valves - Flanged, Threaded, andWelding End

API STD 609 Butterfly Valves: Double Flanged, Lug- and Wafer-Type Fifth Edition

API STD 610 Centrifugal Pumps for Petroleum, Heavy DutyChemical, and Gas Industry Services

API STD 611 General-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services FourthEdition

API STD 612 Special-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services

API STD 613 Special Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services

API STD 614 Lubrication, Shaft-Sealing, and Control-OilSystems for Special-Purpose Applications

API STD 616 Gas Turbines for Refinery Services API STD 617 Centrifugal Compressors for Petroleum, Chemical,

and Gas Service Industries API STD 618 Reciprocating Compressors for Petroleum,

Chemical, and Gas Industry Services API STD 619 Rotary Type Positive Displacement Compressors for

Petroleum, Chemical, and Gas Industry ServicesThird Edition

API STD 620 Design and Construction of Large, Welded, Low-Pressure Storage Tanks Ninth Edition; Addendum1-1996; Additional Pages for Addendum 1-1997

API STD 650 Welded Steel Tanks for Oil Storage NinthEdition; Addendum 1 - 1994; Addendum 2 - 1995; Addendum 3 - 1996

API RP 651 Cathodic Protection of Aboveground PetroleumStorage Tanks Second Edition

API RP 652 Lining of Aboveground Petroleum Storage TankBottoms Second Edition

API STD 653 Tank Inspection, Repair, Alteration, andReconstruction Second Edition; Errata February1996; Errata May 1996; Follow Up to Errata May1996; Addendum 1-December 1996

API STD 660 Shell-and-Tube Heat Exchangers for GeneralRefinery Services

API STD 661 Air-Cooled Heat Exchangers for General RefineryServices Fourth Edition

API STD 662 Plate Heat Exchangers for General RefineryServices

API STD 670 Vibration, Axial Position, and Bearing


Temperature Monitoring Systems Third Edition; Replaces STD 678

API STD 671 Special-Purpose Couplings for Refinery Service API STD 672 Packaged, Integrally Geared Centrifugal Air

Compressors for Petroleum, Chemical, and GasIndustry Services

API STD 674 Positive Displacement Pumps - Reciprocating API STD 675 Positive Displacement Pumps - Controlled Volume API STD 676 Positive Displacement Pumps - Rotary API STD 677 General-Purpose Gear Units for Petroleum,

Chemical, and Gas Industry Services SecondEdition

API STD 681 Liquid Ring Vacuum Pumps and Compressors forPetroleum, Chemical, and Gas Industry Services

API STD 682 Shaft Sealing Systems for Centrifugal and RotaryPumps

API RP 683 Quality Improvement Manual for MechanicalEquipment in Petroleum, Chemical, and GasIndustries

API PUBL 684 Tutorial on the API Standard Paragraphs CoveringRotor Dynamics and Balancing: an Introduction toLateral Critical and Train Torsional Analysis andRotor Balancing First Edition

API RP 686 Recommended Practices for Machinery Installationand Installation Design First Edition

API RP 750 Management of Process Hazards First Edition; Erratum - 1990

API RP 751 Safe Operation of Hydrofluoric Acid AlkylationUnits

API RP 752 Management of Hazards Associated with Location ofProcess Plant Buildings CMA Manager's Guide; First Edition; Errata - 1995

API PUBL 760 Model Risk Management Plan Guidance for PetroleumRefineries Guidance in Complying with EPA's RMPRule (40 Code of Federal Regulations, Part 68) First Edition

API PUBL 761 Model Risk Management Plan Guidance forExploration and Production (E&P) FacilitiesGuidance in Complying with EPA's RMP Rule (40Code of Federal Regulations, Part 68) FirstEdition

API PUBL 800 (WITHDRAWN) Literature Survey Subsurface andGroundwater Protection Related to PetroleumRefinery Operations

API PUBL 850 API Standards 620, 650, and 653 Interpretations - Tank Construction and In-Service InspectionAnswers to Technical Inquiries; First Edition

API PUBL 910 Digest of State Boiler, Pressure Vessel, Pipingand Aboveground Storage Tank Rules andRegulations Eighth Edition

API RP 920 Prevention of Brittle Fracture of PressureVessels

API RP 936 Refractory Installation Quality ControlGuidelines-Inspection and Testing MonolithicRefractory Linings and Materials First Edition

API PUBL 937 Evaluation of Design Criteria for Storage Tankswith Frangible Roof Joints

API PUBL 938 Experimental Study of Causes and Repair of


Cracking of 1 1/4Cr- 1/2Mo Steel Equipment API PUBL 939 Research Report on Characterization and

Monitoring of Cracking in Wet H2S Service API RP 941 Steels for Hydrogen Service at Elevated

Temperatures and Pressures in PetroleumRefineries and Petrochemical Plants FifthEdition; Errata October - 1997

API RP 945 Avoiding Environmental Cracking in Amine UnitsSecond Edition

API PUBL 959 Characterization Study of Temper Embrittlement ofChromium-Molybdenum Steels

API PUBL 960 (WITHDRAWN) Evaluation of the Principles ofMagnetic Water Treatment

API RP 1004 Bottom Loading and Vapor Recovery for MC-306 TankMotor Vehicles Seventh Edition (R 1995)

API RP 1102 Steel Pipelines Crossing Railroads and Highways API STD 1104 Welding of Pipelines and Related Facilities API RP 1107 Pipeline Maintenance Welding Practices API RP 1109 Marking Liquid Petroleum Pipeline Facilities API RP 1110 Pressure Testing of Liquid Petroleum Pipelines

Fourth Edition API RP 1111 Design, Construction, Operation, and Maintenance

of Offshore Hydrocarbon Pipelines API RP 1112 Developing a Highway Emergency Response Plan for

Incidents Involving Hazardous Materials ThirdEdition

API PUBL 1113 Developing a Pipeline Supervisory Control CenterSecond Edition

API RP 1114 Design of Solution-Minded Underground StorageFacilities

API API 1115 Operation of Solution-Mined Underground StorageFacilities First Edition

API RP 1117 Movement of In-Service Pipelines API RP 1118 Training and Qualification of Liquid Pipeline

Controllers API RP 1119 Training and Qualification of Liquid Pipeline

Operators API RP 1120 Training and Qualification of Liquid Pipeline

Maintenance Personnel API RP 1123 Development of Public Awareness Programs by

Hazardous Liquid Pipeline Operators API RP 1124 Ship, Barge, and Terminal Hydrocarbon Vapor

Collection Manifolds API RP 1125 Overfill Control Systems for Tank Barges API RP 1127 Marine Vapor Control Training Guidelines API RP 1129 Assurance of Hazardous Liquid Pipline System

Integrity API PUBL 1130 Computational Pipeline Monitoring API PUBL 1132 Effects of Oxygenated Fuels and Reformulated

Diesel Fuels on Elastomers and Polymers inPipeline/Terminal Components

API RP 1139 Training Guidelines for Tank Ship Personnel API RP 1140 Guidelines for Developing Bridge Management Teams API RP 1141 Guidelines for Confined Space Entry on Board Tank

Ships in the Petroleum Industry API PUBL 1149 Pipeline Variable Uncertainties and Their Effects

on Leak Detectability


API PUBL 1155 Evaluation Methodology for Software Based LeakDetection Systems

API PUBL 1156 Effects of Smooth and Rock Dents on LiquidPetroleum Pipelines First Edition

API PUBL 1509 Engine Oil Licensing and Certification SystemFourteenth Edition

API PUBL 1509C Guide to the API Engine Oil Licensing andCertification System First Edition

API STD 1512 Petroleum Test Laboratory Accreditation ProgramFirst Edition

API PUBL 1520 Directory of Licensees: API Engine Oil Licensingand Certification System Including Brand ProductsAuthorized to Display the Engine Oil Licensingand Certification Symbols Index Entry Only - MostCurrent Listing Available on API Website

API RP 1525 Bulk Oil Testing, Handling, and StorageGuidelines First Edition

API BULL 1529 Aviation Fueling Hose Fourth Edition; Erratum - June 1990 (R 1994)

API STD 1542 Airport Equipment Marking for Fuel IdentificationSixth Edition

API PUBL 1551 Motor Oil Guide API PUBL 1560 Lubricant Service Designations for Automotive

Manual Transmissions, Manual Transaxles, andAxles

API PUBL 1571 Diesel Fuel Questions & Answers for Highway andOff-Highway Use

API PUBL 1577 Winter Diesel Questions & Answers API PUBL 1580 Gasoline for Your Car Questions & Answers API PUBL 1581 Specifications and Qualification Procedures for

Aviation Jet Fuel Filter/Separators ThirdEdition; (R 1994) Addendum - 1995

API STD 1584 Four-Inch Hydrant System Components andArrangements

API PUBL 1591 (WITHDRAWN) Recycling Used Motor Oil API PUBL 1593 Gasoline Marketing in the United States Today API RP 1604 Closure of Underground Petroleum Storage Tanks API PUBL 1612 Guidance Document for the Discharge of Petroleum

Distribution Terminal Effluents to Publicly OwnedTreatment Works First Edition

API RP 1615 Installation of Underground Petroleum StorageSystems

API RP 1621 Bulk Liquid Stock Control at Retail Outlets API RP 1626 Storing and Handling Ethanol and Gasoline-Ethanol

Blends at Distribution Terminals and ServiceStations

API RP 1627 Storage and Handling of Gasoline-Methanol/Cosolvent Blends at Distribution Terminals andService Stations (R 1993)

API PUBL 1628 Guide to the Assessment and Remediation ofUnderground Petroleum Releases

API PUBL 1628A Natural Attenuation Processes API PUBL 1628B Risk-Based Decision Making API PUBL 1628C Optimization of Hydrocarbon Recovery API PUBL 1628D In-Situ Air Sparging API PUBL 1628E Operation and Maintenance Considerations for

Hydrocarbon Remediation Systems


API PUBL 1629 Guide for Assessing and Remediating PetroleumHydrocarbons in Soils

API RP 1631 Interior Lining of Underground Storage TanksFourth Edition

API RP 1632 Cathodic Protection of Underground PetroleumStorage Tanks and Piping Systems

API RP 1633 Handling Water Discharges from Automotive ServiceFacilities Located at Petroleum MarketingOperations

API PUBL 1634 Used Oil State Law Digest API RP 1637 Using the API Color-Symbol System to Mark

Equipment and Vehicles for Product Identificationat Service Stations and Distribution TerminalsSecond Edition; Supplement

API PUBL 1638 Waste Management Practices for PetroleumMarketing Facilities

API PUBL 1642 Alcohols, Ethers and Gasoline-Alcohol and -EtherBlends A Report on Fire-Safety Considerations atPetroleum Marketing Facilities

API RP 1650 Set of Six API Recommended Practices onUnderground Petroleum Storage Tank ManagementIndex Entry Only

API PUBL 1663C Underground Storage Tank Installation ExhibitBook Underground Storage Tank InstallationWorkbook

API PUBL 1663E Underground Storage Tank Removal Exhibit BookUnderground Storage Tank Removal Workbook

API PUBL 1669 Results of a Retail Gasoline Outlet andCommercial Parking Lot Storm Water Runoff Study

API Proceedings of the 1992 API Pipeline Conference API Proceedings of the 1993 API Pipeline Conference API Proceedings of the 1994 API Pipeline Conference

Errata - June 1995 API Final Report 1996 American Petroleum Institute/

National Petroleum Refiners Association Survey ofRefining Operations and Product Quality

API STD 2000 Venting Atmospheric and Low-Pressure StorageTanks Nonrefrigerated and Refrigerated FourthEdition

API RP 2003 Protection Against Ignitions Arising out ofStatic, Lightning, and Stray Currents FifthEdition; Replaces PUBL 1003

API RP 2005 Service Station Safety Sixth Edition; Supplement - 1996

API PUBL 2009 Safe Welding, Cutting, and Other Hot WorkPractices in Refineries, Gas Plants, andPetrochemical Plants

API PUBL 2013 Cleaning Mobile Tanks in Flammable or CombustibleLiquid Service

API PUBL 2015 Safe Entry and Cleaning of Petroleum StorageTanks

API PUBL 2021 Fighting Fires in and Around Flammable andCombustible Liquid Atmospheric Storage Tanks

API PUBL 2026 Safe Descent Onto Floating Roofs of Tanks inPetroleum Service

API PUBL 2027 Ignition Hazards Involved in Abrasive Blasting ofAtmospheric Storage Tanks in Hydrocarbon Service

API PUBL 2028 Flame Arresters in Piping Systems


API PUBL 2030 Guidelines for Application of Water Spray Systemsfor Fire Protection in the Petroleum Industry

API PUBL 2031 Combustible Gas Detector Systems andEnvironmental and Operational Factors InfluencingTheir Performance

API PUBL 2200 Repairing Crude Oil, Liquefied Petroleum Gas, andProduct Pipelines

API RP 2201 Procedures for Welding or Hot Tapping onEquipment in Service

API PUBL 2202 Dismantling and Disposing of Steel fromAboveground Leaded Gasoline Storage Tanks

API PUBL 2207 Preparing Tank Bottoms for Hot Work API PUBL 2214 Spark Ignition Properties of Hand Tools API PUBL 2216 Ignition Risk of Hydrocarbon Vapors by Hot

Surfaces in the Open Air API PUBL 2217A Guidelines for Work in Inert Confined Spaces in

the Petroleum Industry API PUBL 2219 Safe Operation of Vacuum Trucks in Petroleum

Service API RP 2220 Improving Owner and Contractor Safety Performance API RP 2221 Implementing a Contractor Safety and Health

Program API PUBL 2230 Static Electricity Research Project

API PUBL 2300 (WITHDRAWN) Evaluation of Fire Fighting Foams asFire Protection for Alcohol Containing Fuels

API RP 2350 Overfill Protection for Storage Tanks inPetroleum Facilities Second Edition

API PUBL 2375 1996 Summary of U.S. Occupational Injuries, Illnesses, and Fatalities in the PetroleumIndustry; as Reported to the American PetroleumInstitute Covering U.S. Petroleum andPetrochemical Operations of Reporting Companiesfor 1996

API BULL 2509B Shop Testing of Automatic Liquid Level GagesInformation Sheet - February 1972 R(1997)

API STD 2510 Design and Construction of LPG InstallationsSeventh Edition

API PUBL 2510A Fire-Protection Considerations for the Design andOperation of Liquefied Petroleum Gas (LPG) Storage Facilities Second Edition

API PUBL 2514A Atmospheric Hydrocarbon Emissions from MarineVessel Transfer Operations (R 1992)

API BULL 2516 Evaporation Loss from Low-Pressure Tanks (R 1993) API PUBL 2517D Documentation File for API Publication 2517

- Evaporation Loss from External Floating-RoofTanks

API PUBL 2519D Documentation File for API Publication 2519 - Evaporation Loss from Internal Floating-RoofTanks

API BULL 2521 Use of Pressure-Vacuum Vent Valves forAtmospheric Pressure Tanks to Reduce EvaporationLoss (R 1993)

API PUBL 2524 Impact Assessment of New Data on the Validity ofAmerican Petroleum Institute Marine TransferOperation Emission Factors

API PUBL 2525 Review of Air Toxics Emission Calculations fromStorage Tanks (Phase I) Air Toxic EmissionsCalculation Validation Program: Analysis of Crude


Oil and Refined Product Samples and Comparison ofVapor Composition to Model Predictions (PhaseII) (Replaced by MPMS 14.3.1 Through MPMS 14.3.4)

API STD 2540 VOL III See API MPMS 11.1 Vol III API STD 2540 VOL IV See API MPMS 11.1 Vol IV API STD 2540 VOL VI See API MPMS 11.1 Vol VI API STD 2540 VOL IX See API MPMS Volume IX API STD 2540 VOL X See API MPMS 11.1 Vol X API STD 2540 VOL XI/XII See API MPMS 11.1 Vol XI/XII API STD 2540 VOL XIII See MPMS 11.1 Vol XIII API STD 2540 VOL XIV See API MPMS 11.1 Vol XIV API STD 2545 (WITHDRAWN) Gaging Petroleum and Petroleum

Products, Method of ASTM D1085; Replaced by MPMSChapters 3; 3.1A; 3.1B; 3.2; 3.3; 3.4 R(1997)

API STD 2551 Standard Method for Measurement and Calibrationof Horizontal Tanks ASTM D1410 R(1997)

API STD 2552 Measurement and Calibration of Spheres andSpheroids, Method for ASTM D1408 R(1997)

API STD 2554 Measurement and Calibration of Tank Cars, Methodfor ASTM D1409 R(1997)

API STD 2555 Method for Liquid Calibration of Tanks ASTMD1406-65 R(1997)

API RP 2556 Correcting Gauge Tables for Incrustation API PUBL 2557 Vapor Collection and Control Options for Storage

and Transfer Operations in the Petroleum Industry API PUBL 2558 Wind Tunnel Testing of External Floating-Roof

Storage Tanks API PUBL 2564 See MPMS 15

API STD 2610 Design, Construction, Operation, Maintenance, andInspection of Terminal & Tank Facilities

API PUBL 4261 Alcohols and Ethers a Technical Assessment ofTheir Application as Fuels and Fuel Components

API PUBL 4262 Methanol Vehicle Emissions API PUBL 4296 Analysis of Refinery Wastewaters for the EPA

Priority Pollutants Interim Report API PUBL 4297 Fate and Effects of Polynuclear Aromatic

Hydrocarbons in the Aquatic Environment API PUBL 4311 Nox Emissions from Petroleum Industry Operations API PUBL 4317 Underground Movement of Gasoline on Groundwater

and Enhanced Recovery by Surfactants (Reprinted1986)

API PUBL 4322 VOL 1 Volume 1-Fugitive Hydrocarbon Emissions fromPetroleum Production Operations

API PUBL 4322 VOL 2 Volume 2-Fugitive Hydrocarbon Emissions fromPetroleum Production Operations

API PUBL 4346 Refinery Wastewater Priority Pollutant Study-Sample Analysis and Evaluation of Data

API PUBL 4365 Characterization of Particulate Emissions fromRefinery Process Heaters and Boilers

API PUBL 4367 Groundwater Monitoring and Sample Bias API PUBL 4369 VOL 1 Treatment Technology for Removal of Dissolved

Gasoline Components from Ground Water Volume 1 API PUBL 4369 VOL 2 Treatment Technology for Removal of Dissolved

Gasoline Components from Ground Water Volume 2 API PUBL 4379 Land Treatability of Appendix VIII Constituents

Present in Petroleum Industry Wastes API PUBL 4381 Evaluation of New Versions of the Empirical

Kinetic Modeling Approach (EKMA) Development of a


Statistical Methodology for Control StrategyAnalysis

API PUBL 4382 New Approaches to Quantification of Perception ofScenic Beauty and Visibility

API PUBL 4388 Land Treatment Safe and Efficient Disposal ofPetroleum Waste

API PUBL 4390 Test Results of Surfactant Enhanced GasolineRecovery in a Large-Scale Model Aquifer

API PUBL 4391 Biomonitoring; Techniques for Measuring theBiological Effects of Liquid Effluents

API PUBL 4394 Detection of Hydrocarbons in Groundwater byAnalysis of Shallow Soil Gas/Vapor

API PUBL 4395 Laboratory Study on Solubilities of PetroleumHydrocarbons in Groundwater

API PUBL 4396 Protecting Groundwater; What We've LearnedThrough Research

API PUBL 4397 Chronic Effects of Drilling Fluids Discharged tothe Marine Environment

API PUBL 4399 Methods of Storage, Transportation, and Handlingof Drilling Fluid Samples

API PUBL 4401 Applicability of Single Species Bioassay forEstimating the Effects of a Refinery Effluent onan Estuarine Environment

API PUBL 4405 Field Evaluation of Well Flushing Procedures API PUBL 4407 Rehabilitating Oiled Sea Birds: A Field Manual API PUBL 4410 Subsurface Venting of Hydrocarbon Vapors from an

Underground Aquifier API PUBL 4411 Effect of Prudhoe Bay Crude Oil on the Homing of

Coho Salmon in Marine Waters API PUBL 4412 Oil Effects on Spawning Behavior and Reproduction

in Pacific Herring (Clupea Harengus Pallasi) API PUBL 4415 Literature Survey: Unassisted Natural Mechanisms

to Reduce Concentrations of Soluble GasolineComponents

API PUBL 4419 Review of Published Odor and Taste ThresholdValues of Soluble Gasoline Components

API PUBL 4421 Plume Rise Research for Refinery Facilities API PUBL 4422 Cost Model for Selected Technologies for Removal

of Gasoline Components from Groundwater API PUBL 4423 Tracer Study Conducted to Acquire Data for

Evaluation of Air Quality Dispersion Models; Errata

API PUBL 4425 Role of Chemical Dispersants in Oil Spill Control API PUBL 4426 Bacterial Growth in and Penetration of

Consolidated and Unconsolidated Sands ContainingGasoline (Reprinted 1986)

API PUBL 4427 Beneficial Stimulation of Bacterial Activity inGround Waters Containing Petroleum Products (Reprinted 1986)

API PUBL 4428 Enhancing the Microbial Degradation ofUnderground Gasoline by Increasing AvailableOxygen (Reprinted 1986)

API PUBL 4429 Examination of Venting for Removal of GasolineVapors from Contaminated Soil (Reprinted 1986)

API PUBL 4430 Field Application of Subsurface Biodegradation ofGasoline in a Sand Formation (Reprinted 1986)

API PUBL 4431 Forced Venting to Remove Gasoline Vapor from a


Large-Scale Model Aquifer (Reprinted 1986) API PUBL 4434 Review of Ground-Water Models (Reprinted 1986) API PUBL 4435 Oil Spill Cleanup: Options for Minimizing Adverse

Ecological Impacts API PUBL 4438 Underwater Drilling - Measurement of Sound Levels

and Their Effects on Belukha Whales API PUBL 4439 Berichte Research Report 250-1 Exposure Data on

C7 and C8 Aromatics During Handling andProduction of Motor Gasolines

API PUBL 4440 Tidal Area Dispersant Project Fate and Effects ofChemically Dispersed Oil in the Nearshore BenthicEnvironment

API PUBL 4441 Toxicity of Dispersed and Undispersed Prudhoe BayCrude Oil Fractions to Shrimp, Fish, and TheirLarvae

API PUBL 4442 Laboratory Evaluation of Seven-Day Fathead Minnowand Ceriodaphnia Chronic Toxicity Tests

API PUBL 4443 Effect of Suspended Solids on Bioavailability ofPetroleum Refinery Effluent Chemicals

API PUBL 4445 Effects of Crude Oil and Chemically Dispersed Oilon Chemoreception and Homing in Pacific Salmon

API PUBL 4447 Saving Oiled Seabirds API PUBL 4448 Field Study of Enhanced Subsurface Biodegradation

of Hydrocarbons Using Hydrogen Peroxide as anOxygen Source

API PUBL 4450 Developing Criteria for Advance Planning forDispersant Use

API PUBL 4451 Assessing Natural Resource Damages from HazardousSubstances: An Examination of Existing AssessmentApproaches

API PUBL 4452 1987 Oil Spill Conference API PUBL 4453 Effects of Airgun Energy Releases on the Northern

Anchovy API PUBL 4455 Land Treatability of Appendix VIII Constituents

Present in Petroleum Refinery Wastes: Laboratoryand Modeling Studies

API PUBL 4456 Aerosol Formation, and Subsequent Transformationand Dispersion, During Accidental Releases ofChemicals

API PUBL 4457 API Evaluation of Urban Dispersion Models withthe St. Louis Raps Data Base

API PUBL 4459 Surface Roughness Effects on Heavier-Than-Air GasDiffusion

API PUBL 4460 Effects of a Dispersed and Undispersed Crude Oilon Mangroves, Seagrassses and Corals

API PUBL 4461 Development and Evaluation of the OCD/API Model API PUBL 4465 Evaluation of Treatment Technologies for Listed

Petroleum Refinery Wastes API PUBL 4466 Field Studies on the Reproductive Effects of Oil

and Emulsion on Marine Birds API PUBL 4467 (WITHDRAWN) Effect of Lower RVP Fuels on Cold-

Start Driveability API PUBL 4468 Fathead Minnow 7-Day Test: Round Robin Study

Intra- and Interlaboratory Study to Determine theReproducibility of the Seven-Day Fathead MinnowLarval Survival and Growth Test

API PUBL 4469 Sorption/Desorption of Soluble PetroleumConstituents by Materials Used in Monitoring


Wells API PUBL 4471 Treatment System for the Reduction of Aromatic

Hydrocarbons and Ether Concentrations inGroundwater

API PUBL 4472 Fate and Effects of Produced Water Discharges inNearshore Marine Waters

API PUBL 4473 Bioaccumulation of Polycyclic AromaticHydrocarbons and Metals in Estuarine Organisms

API PUBL 4474 Phase Separated Hydrocarbon Contaminant Modelingfor Corrective Action

API PUBL 4475 Rehabilitation of Groundwater: Removal of SolublePetroleum Constituents Through Soil Application

API PUBL 4476 Hydrogeologic Database for Ground Water Modeling API PUBL 4477 Acute Exposure to Methanol in Fuels: A Prediction

of Ingestion Incidence and Toxicity API PUBL 4478 Rapid Test for Dispersant Effectiveness at Oil

Spill Sites API PUBL 4479 Proceedings 1989 Oil Spill Conference

Prevention, Behavior, Control, Cleanup API PUBL 4480 Fate and Effects of Drilling Fluid and Cutting

Discharges in Shallow, Nearshore Waters API PUBL 4481 Rapid Bioassay Procedures for Drilling Fluids API PUBL 4482 VOL II Species Tolerance for NPDES Bioassays Volume II

-- Marine Species API PUBL 4483 VOL I Species Tolerance for NPDES Bioassays Volume I

-- Freshwater Species API PUBL 4484 VOL I Monitoring Near Refineries for Airborne Chemicals

on the SARA Title III Section 313 List Volume IValidated Ambient Air Concentrations Around ThreeRefineries

API PUBL 4485 Effects of Offshore Petroleum Operations on ColdWater Marine Mammals: A Literature ReviewReplaces PUBL 4370

API PUBL 4486 Evaluation of the US EPA Proposed Ozone PrecursorPoint Source Screening Technique Report on Task 2of the Comprehensive Evaluation Plan

API PUBL 4488 Preliminary Evaluation of the US EPA ProposedOzone Precursor Point Source Screening TechniqueReport on Task 1 of the Comprehensive EvaluationPlan

API PUBL 4489 Assessment of the Adaptability of the API OnboardRefueling Vapor Recovery System to the CurrentVehicle Population

API PUBL 4490 Measuring Natural Resource Damages: An EconomicAppraisal

API PUBL 4491 VOL I Effect of Homogeneous and Heterogeneous SurfaceRoughness on Heavier-Than-Air Gas DispersionVolume I

API PUBL 4492 VOL II Effect of Homogeneous and Heterogeneous SurfaceRoughness on Heavier-Than-Air Gas DispersionVolume II Supplemental Appendices

API PUBL 4494 VOL II Monitoring near Refineries for Airborne Chemicalson the SARA Title III Section 313 List Volume IIA Generic Study Design Protocol

API PUBL 4495 VOL III Monitoring near Refineries for Airborne Chemicalson the SARA Title III Section 313 List Volume IIILiterature Survey Monitoring Data for SelectedChemicals in Airborne Emissions


API PUBL 4496 VOL IV Monitoring Near Refineries for Airborne Chemicalson the SARA Title III Section 313 List Volume IVA Sampling and Analytical Protocol for SelectedChemicals in Airborne Emissions

API PUBL 4497 Cost-Effective, Alternative TreatmentTechnologies for Reducing the Concentrations ofMethyl Tertiary Butyl Ether and Methanol inGroundwater

API PUBL 4498 Survey and Analysis of Liquid Gasoline Releasedto the Environment During Vehicle Refueling atService Stations

API PUBL 4499 Evaluation of Analytical Methods for MeasuringAppendix IX Constituents in Groundwater

API PUBL 4500 Landfarm Air Emissions API PUBL 4501 Sediment Toxicity Evaluation API PUBL 4502 VOL I Detailed Analysis of Ozone State Implementation

Plans in Seven Areas Selected for RetrospectiveEvaluation of Reasons for State ImplementationPlan Failure Volume I: Executive Summary

API PUBL 4503 VOL II Detailed Analysis of Ozone State ImplementationPlans in Seven Areas for Retrospective Evaluationof Reasons for State Implementation Plan FailureVolume II: Technical Report

API PUBL 4504 Case-Control Study of Kidney Cancer AmongPetroleum Refinery Workers

API PUBL 4506 Dioxin and Furans - A Primer What They Are andHow to Measure Them

API PUBL 4507 Abandoned Oil and Gas Industry Wells; AQuantitative Assessment of Their EnvironmentalImplications

API PUBL 4508 Petroleum in the Freshwater Environment; AnAnnotated Bibliography 1946 - 1983

API PUBL 4509 Evaluation of Soil Gas and Geophysical Techniquesfor Detection of Hydrocarbons

API PUBL 4510 Technological Limits of Groundwater Remediation: A Statistical Evaluation Method

API PUBL 4511 Vehicle Emissions Inspection and Maintenance (I/M) Program Improvement Strategies

API PUBL 4513 Review of Natural Resource Damage Assessments inFreshwater Environments Task 1 - Review of CaseHistories

API PUBL 4514 Review of Natural Resource Damage Assessments inFreshwater Environments Task 2 - Effects of OilReleases into Freshwater Habitats

API PUBL 4515 Use of Reactivity Factors to Predict OzoneImpacts of Methanol Fuel

API PUBL 4516 Sampling and Analysis of Gasoline Range Organicsin Soil

API PUBL 4517 Produced Water Impacts on Louisiana WetlandsErrata - 1991

API PUBL 4518 Measurement of BTEX Emission Fluxes from RefineryWastewater Impoundments Using Atmospheric TracerTechniques

API PUBL 4519 API Exposure Classification Scheme for Collectionof Industrial Hygiene Monitoring Data

API PUBL 4520 Evaluation of a Draft Method for Ignitability ofSolid Wastes

API PUBL 4521 Evaluation of the AET as a Basis for Setting


Sediment Quality Criteria API PUBL 4522 Results of Hazard Response Model Evaluation Using

Desert Tortoise (NH3) and Goldfish (HF) DataBases Volume 1: Summary Report

API PUBL 4523 Results of Hazard Response Model Evaluation UsingDesert Tortoise (NH3) and Goldfish (HF) DataBases Volume 2: Appendices

API PUBL 4524 Clinical Toxicology of the Acute Ingestion ofMethanol/Hydrocarbon Blends; A-State-of-the ArtReview

API PUBL 4525 Compilation of Field- Collected Cost andTreatment Effectiveness Data for the Removal ofDissolved Gasoline Components from Groundwater

API PUBL 4526 Atmospheric Chemistry of Sulfate Esters API PUBL 4527 Evaluation of Limiting Constituents Suggested for

Land Disposal of Exploration and ProductionWastes

API PUBL 4528 Petroleum Release Decision Framework (PRDF) User's Manual Version 1.0

API PUBL 4529 Oil Spill Conference Prevention, Behavior, Control, Cleanup

API PUBL 4531 Chemical Fate and Impact of Oxygenates inGroundwater: Solubility of BTEX from Gasoline-Oxygenate Mixtures

API PUBL 4532 Produced Water Radionuclide Hazard/RiskAssessment Phase I

API PUBL 4533 VOLUME I Effects of Fuel RVP and Fuel Blends on Emissionsat Non-FTP Temperatures Volume I: Summary Report

API PUBL 4534 VOLUME II Effects of Fuel RVP and Fuel Blends on Emissionsat Non-FTP Temperatures Volume II: Compilation ofTest Data and Laboratory Procedures

API PUBL 4536 Methanol Health Effects Epidemiology LiteratureReview and Search for Study Population: Part 1 - Critical Review of the Literature Part 2 - Search for Study Population

API PUBL 4538 Remote Sensing of Automobile Exhaust API PUBL 4539 Evaluation of Area and Volume Source Dispersion

Models for Petroleum and Chemical IndustryFacilities Phase I Final Report

API PUBL 4540 Area and Volume Source Air Quality ModelPerformance Evaluation Phase II Final Report

API PUBL 4541 Area/Volume Source Dispersion Model PerformanceEvaluation, Phase III

API PUBL 4542 Temperature, Reid Vapor Pressure and GasoholEffects on Running Losses

API PUBL 4543 User's Manual for REGRESS: Statistical Evaluationof Asymptotic Limits of Groundwater Remediation

API PUBL 4545 Hazard Response Modeling Uncertainty (AQuantitative Method) Volume I User's Guide forSoftware for Evaluating Hazardous Gas DispersionModels

API PUBL 4546 Hazard Response Modeling Uncertainty (AQuantitative Method) Volume II Evaluation ofCommonly Used Hazardous Gas Dispersion Models

API PUBL 4547 Hazard Response Modeling Uncertainty (aQuantitative Method) Volume III Components ofUncertainty in Hazardous Gas Dispersion Models

API PUBL 4548 Screening of Soils for Leachable Benzene


Prediction of Toxicity Characteristic LeachingProcedure (TCLP) Benzene from Total BenzeneAnalysis, Mini-TCLP, and Headspace Analysis

API PUBL 4549 Field Study of Sediment Quality Near a RefineryOutfall

API PUBL 4550 Uncertainties in Current Models of Global Warming API PUBL 4551 Treatment of Gasoline-Contaminated Groundwater

Through Surface Application Part I - LaboratoryExperiments

API PUBL 4552 Treatment of Gasoline-Contaminated GroundwaterThrough Surface Application Part II - A PrototypeField Investigation

API PUBL 4553 Gasoline Vapor Exposure Assessment at ServiceStations

API PUBL 4554 Study of the Relationship between Folate Statusand Methanol Toxicity

API PUBL 4555 Mortality Study of Marketing and MarineDistribution Workers with Potential Exposure toGasoline in the Petroleum Industry

API PUBL 4556 Scientific Assessment of the Urban Airshed Model (UAM-IV)

API PUBL 4557 Effects of Specific Fuel Aromatic Compounds onMotor Vehicle Exhaust Emissions Volume IStatistical Analysis and Interpretation Volume IIProcedures and Data Report

API PUBL 4558 Options for Minimizing Environmental Impacts ofFreshwater Spill Response

API PUBL 4560 A 90-Day Feeding Study in the Rat with SixDifferent White Mineral Oils (N15 (H), N70 (H), N70 (A), P15 (H), N10 (A), and P100 (H), ThreeDifferent Mineral Waxes (a Low Melting PointWax, a High Melting Point Wax and a High SulphurWax) and Coconut Oil

API PUBL 4561 Pump and Treat: The Petroleum IndustryPerspective

API PUBL 4563 Assessment of Planned Northeast Ozone TransportRegion Modeling Activities

API PUBL 4566 Evaluation of the Technology Alternatives forControlling Fugitive Emissions from SludgeDewatering Operations

API PUBL 4567 Oil Spill Response in Freshwater Environments API PUBL 4568 Preliminary Scope for a Gulf Coast Ozone Study API PUBL 4569 Subsurface Fate and Transport of a Methanol/

Gasoline Blend (M85) a Laboratory Investigation API PUBL 4571 Fundamental Evaluation of the Chemdat7 Air

Emissions Model API PUBL 4572 In-Use Vehicle Exhaust Emissions Study:

Controlled Testing API PUBL 4573 Comparison of HC and CO Emission Estimates Using

FTP, IM240 and Remote Sensing: StatisticalAnalysis

API PUBL 4574 On-Road Carbon Monoxide and Hydrocarbon RemoteSensing in the Chicago Area in 1992

API PUBL 4580 1993 Oil Spill Conference API PUBL 4581 Evaluation of Technologies for the Treatment of

Petroleum Product Marketing Terminal Wastewater API PUBL 4582 Comparative Evaluation of Biological Treatment of

Petroleum Product Terminal Wastewater by the


Sequencing Batch Reactor Process and the RotatingBiological Contactor Process

API PUBL 4587 Remote Sensing Feasibility Study of RefineryFenceline Emissions

API PUBL 4588 Development of Fugitive Emission Factors andEmission Profiles for Petroleum MarketingTerminals Volume I: Text

API PUBL 4589 Fugitive Hydrocarbon Emissions from Oil and GasProduction Operations

API PUBL 4591 Odor and Taste Threshold Studies Performed withTertiary Amyl Methyl Ether (TAME)

API PUBL 4592 Odor Threshold Studies Performed with Gasolineand Gasoline Combined with MTBE, ETBE and TAME

API PUBL 4593 Transport and Fate of Non-BTEX PetroleumChemicals in Soils and Groundwater

API PUBL 4594 Critical Review of Toxicity Values and anEvaluation of the Persistence of PetroleumProducts for Use in Natural Resource DamageAssessments

API PUBL 4595 Criteria for pH in Onshore Solid Waste Managementin Exploration and Production Operations

API PUBL 4596 Studies to Determine the Ecological Effects ofCleanup Methods for Oiled Shorelines Phase 1: Study Design for a Louisiana Marsh Experiment

API PUBL 4597 Analytical Method Performance for RCRA ProgramsRefinery and Other RCRA Analytes

API PUBL 4598 Gasoline: Insights into the Etiology of theDevelopment of Hepatocellular Carcinoma in theMouse

API PUBL 4599 Interlaboratory Study of Three Methods forAnalyzing Petroleum Hydrocarbons in Soils

API PUBL 4600 Metals Criteria for Land Management ofExploration and Production Wastes: TechnicalSupport Document for API Recommended GuidanceValues

API PUBL 4601 Transport and Fate of Dissolved Methanol, Methyl-Tertiary-Butyl- Ether, and MonoaromaticHydrocarbons in a Shallow Sand Aquifer AppendixH: Laboratory Biotransformation Studies

API PUBL 4602 Minimization, Handling, Treatment, and Disposalof Petroleum Products Terminal Wastewaters; Errata - 1994

API PUBL 4603 Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust EmissionFactor Methodologies and Oxygenate Effects

API PUBL 4604 Investigation of MOBILE5a Emission Factors: Evaluation of I/M and LEV Program Benefits

API PUBL 4605 Investigation of MOBILE5a Emission Factors: Evaluation of IM240-to-FTP Correlation and BaseEmission Rate Equations

API PUBL 4606 Source Control and Treatment of ContaminantsFound in Petroleum Product Terminal Tank Bottoms

API PUBL 4607 User's Guide and Technical Resource Document: Evaluation of Sediment Toxicity Tests forBiomonitoring Programs

API PUBL 4608 Evaluation of Sediment Toxicity Tests forBiomonitoring Programs

API PUBL 4609 In Situ Air Sparging: Evaluation of Petroleum


Industry Sites and Considerations forApplicability, Design and Operation

API PUBL 4610 Critical Review of Draft EPA Guidance onAssessment and Control of BioconcentratableContaminants in Surface Waters

API PUBL 4611 Interlaboratory Study of EPA Methods 1662, 1654A, and 1663 for the Determination of Diesel, Mineral and Crude Oils in Drilling Muds fromOffshore Oil and Gas Industry Discharges

API PUBL 4612 Study of Refinery Fugitive Emissions fromEquipment Leaks

API PUBL 4613 Study of Refinery Fugitive Emissions fromEquipment Leaks Appendices

API PUBL 4615 Emission Factors for Oil and Gas ProductionOperations

API PUBL 4616 Importance of Using Alternative Base Cases inPhotochemical Modeling

API PUBL 4617 Monte Carlo Approach to Generating EquivalentVentilation Rates in Population ExposureAssessments

API PUBL 4618 Characteristics and Performance of SupercriticalFluid Extraction (SFE) in the Analysis ofPetroleum Hydrocarbons in Soils and Sludges

API PUBL 4619 Study to Characterize Air Concentrations ofMethyl Tertiary Butyl Ether (MTBE) at ServiceStations in the Northeast

API PUBL 4620 International Oil Spill Conference ProceedingsAchieving and Maintaining Preparedness

API PUBL 4621A 1995 International Oil Spill ConferenceImplementing an Effective Response ManagementSystem

API PUBL 4621B 1995 International Oil Spill Conference Use andMisuse of Science in Natural Resource DamageAssessment

API PUBL 4621C 1995 International Oil Spill ConferencePerspectives on Establishing and Maintaining OilPollution Response Capabilities

API PUBL 4622 Petroleum Industry Data CharacterizingOccupational Exposures to Methyl Tertiary ButylEther (MTBE) 1983-1993

API PUBL 4623 Anecdotal Health-Related Complaint DataPertaining to Possible Exposures to MethylTertiary Butyl Ether (MTBE): 1993 and 1994Follow-Up Surveys (1984-1994)

API PUBL 4625 Service Station Personnel Exposures to OxygenatedFuel Components - 1994

API PUBL 4627 In Situ and On-Site Biodegradation of Refined andFuel Oils: A Review of Technical Literature 1988 - 1991

API PUBL 4628 Guidance Manual for Modeling HypotheticalAccidental Releases to the Atmosphere

API PUBL 4630 Electronic Exchange of Environmental ComplianceInformation: A Proposed Approach

API PUBL 4631 Petroleum Contaminated Low Permeability Soil: Hydrocarbon Distribution Processes, ExposurePathways and In Situ Remediation Technologies

API PUBL 4632 Reducing Uncertainty in Laboratory SedimentToxicity Tests


API PUBL 4633 Barium in Produced Water: Fate and Effects in theMarine Environment

API PUBL 4634 Index and Abstracts of API Health-RelatedResearch 13th Edition 1959-1994

API PUBL 4635 Compilation of Field Analytical Methods forAssessing Petroleum Product Releases

API PUBL 4637 Analysis of Causes of Failure in High EmittingCars

API PUBL 4638 Calculation Workbook for Oil and Gas ProductionEquipment Fugitive Emissions

API PUBL 4639 Estimation of Fugitive Emissions from PetroleumRefinery Process Drains Phase I Report

API PUBL 4640 Petroleum in the Freshwater Environment anAnnotated Bibliography 1946 - 1993

API PUBL 4641 Summary of Produced Water Toxicity IdentificationEvaluation Research

API PUBL 4642 A Study to Quantify On-Road Emissions of Dioxinsand Furans from Mobile Sources: Phase 2

API PUBL 4643 Estimation of Infiltration and Recharge forEnvironmental Site Assessment

API PUBL 4644 Methodology for Estimating Incremental BenzeneExposures and Risks Associated with GlycolDehydrators

API PUBL 4645 Methane and Carbon Dioxide Emission Estimatesfrom U.S. Petroleum Sources

API PUBL 4646 Evaluation of Fuel Tank Flammability of Low RVPGasolines

API PUBL 4647 Brain Glial Fibrillary Acidic Protein (GFAP) as aMarker of Neurotoxicity During InhalationExposure to Toluene

API PUBL 4648 Human Neurobehavioral Study Methods: Effects ofSubject Variables on Research Results

API PUBL 4650 Analysis of High-Mileage-Vehicle Emissions Datafrom Late-Model, Fuel-Injected Vehicles

API PUBL 4651 International Oil Spill Conference ImprovingEnvironmental Protection - Progress, Challenges, Responsibilities Proceedings

API PUBL 4652A 1997 International Oil Spill Conference PuttingDispersants to Work: Overcoming Obstacles

API PUBL 4652B 1997 International Oil Spill ConferenceInternational Responsibilities: Are We OurBrothers' Keeper?

API PUBL 4652C 1997 International Oil Spill Conference - Differences in Risk Perception: How Clean isClean?

API PUBL 4653 Fugitive Emission Factors for Crude Oil andProduct Pipeline Facilities

API PUBL 4654 Field Studies of BTEX and MTBE IntrinsicBioremediation

API PUBL 4655 Field Evaluation of Biological and Non-BiologicalTreatment Technologies to Remove MTBE/Oxygenatesfrom Petroleum Product Terminal Wastewaters

API PUBL 4656 Bioaccumulation: How Chemicals Move from theWater into Fish and Other Aquatic Organisms

API PUBL 4657 Effects of Sampling and Analytical Procedures onthe Measurement of Geochemical Indicators ofIntrinsic Bioremediation: Laboratory and FieldStudies


API PUBL 4658 Methods for Measuring Indicators of IntrinsicBioremediation: Guidance Manual

API PUBL 4659 Graphical Approach for Determining Site-SpecificDilution-Attenuation Factors (DAFs) TechnicalBackground Document and User's Guide

API PUBL 4663 Remediation of Salt-Affected Soils at Oil and GasProduction Facilities

API PUBL 4667 Vehicle Emissions Testing of Rapidly AgedCatalysts

API PUBL 7100 A Naturally Occurring Radioactive Material (NORM) Disposal Cost Study First Edition

API PUBL 7101 National Survey on Naturally OccurringRadioactive Material (NORM) in PetroleumProduction and Gas Processing Facilities

API PUBL 7102 Methods for Measuring Naturally OccurringRadioactive Materials (NORM) in PetroleumProduction Equipment

API PUBL 7103 Management and Disposal Alternatives forNaturally Occurring Radioactive Material (NORM) Wastes in Oil Production and Gas Plant Equipment

API PUBL 7104 Proceedings of the 1995 API and GRI NaturallyOccurring Radioactive Material (NORM) Conference

API PUBL 7105 Probabilistic Estimates of Dose and Indoor RadonConcentrations Attributable to RemediatedOilfield Naturally Occuring Radioactive Material (NORM)

API RP 9000 (WITHDRAWN) Management Practices, Self-AssessmentProcess, and Resource Materials First Edition; Incorporates Supplement 1 - 1993

API PUBL 31101 Environmental Design Considerations for PetroleumRefining Crude Processing Units

API PUBL 45551 Nested Case-Control Study of Kidney Cancer, Leukemia and Multiple Myeloma in a Cohort ofLand-Based Terminal Workers Exposed to Gasolinein the Petroleum Industry

API PUBL 45552 Exposure Assessment for Marketing and MarineDistribution Workers in the Petroleum Industrywith Potential Exposure to Gasoline

API PUBL 45561 Scientific Assessment of the Urban Airshed Model (UAM-IV): an Overview

API PUBL 45591 (WITHDRAWN) Results of Toxicological Studies; Conducted for the American Petroleum InstituteReplaced by Publ 45592 - 1995

API PUBL 45592 Results of Toxicological Studies API PUBL 45752 Proceedings of the 1991 Oil Spill Conference

Infobase Tutorial and Reference Guide API PUBL 45811 Evaluation Technologies for the Treatment of

Petroleum Project Marketing Terminal Wastewater (Publication 4581) Appendices: Analytical Resultsand Bioassay Results

API PUBL 45821 Comparative Evaluation of Biological Treatment ofPetroleum Product Terminal Wastewater by theSequencing Batch Reactor Process and the RotatingBiological Contractor Process Appendices: Analytical Laboratory Results

API PUBL 45881 Development of Fugitive Emission Factors andEmission Profiles for Petroleum MarketingTerminals Volume II: Appendices


API PUBL 46201 1995 Oil Spill Conference Achieving andMaintaining Preparedness Abstracts

API Technical Data Book - Petroleum Refining SixthEdition

API TDB CHAPTER 1 Technical Data Book Chapter 1 - General DataFifth Edition

API TDB CHAPTER 2 Technical Data Book Chapter 2 - Characterizationof Hydrocarbons

API TDB CHAPTER 3 Technical Data Book Chapter 3 - PetroleumFraction Distillation Interconversions

API TDB CHAPTER 4 Technical Data Book Chapter 4 - CriticalProperties

API TDB CHAPTER 5 Technical Data Book Chapter 5 - Vapor Pressure API TDB CHAPTER 6 Technical Data Book Chapter 6 - Density API TDB CHAPTER 7 Technical Data Book Chapter 7 - Thermal

Properties API TDB CHAPTER 8 Technical Data Book Chapter 8 - Vapor-Liquid

Equilibrium K-Values API TDB CHAPTER 9 Technical Data Book Chapter 9 - Phase Equilibria

in Systems Containing Water Fifth Edition API TDB CHAPTER 10 Technical Data Book Chapter 10 - Surface and

Interfacial Tension API TDB CHAPTER 11 Technical Data Book Chapter 11 - Viscosity Fifth

Edition API TDB CHAPTER 12 Technical Data Book Chapter 12 - Thermal

Conductivity Fifth Edition API TDB CHAPTER 13 Technical Data Book Chapter 13 - Diffusivity API TDB CHAPTER 14 Technical Data Book Chapter 14 - Combustion API TDB CHAPTER 15 Technical Data Book Chapter 15 - Adsorption

Equilibria API 1 Orifice Coefficients for Two-Phase Flow Through

Velocity Controlled Subsurface Safety Valves API 2 Detection and Prevention of Sand Erosion of

Production Equipment API 2 Condensed Version of Detection and Prevention of

Sand Erosion of Production Equipment API 3 Oil Analysis in Production Discharges API 4 Corrosion Fatigue of Cathodically Protected,

Welded Carbon Steel in Cold Seawater API 5 Study of Pressure Drop and Closure Forces in

Velocity-Type Subsurface Safety Valves API 6 Design of Fittings to Reduce Wear Caused by Sand

Erosion API 7 Cyclic Deformations of Offshore Structures on

Clay API 7 Horizontal Cyclic load Behavior of Small Scale

Piles and Footings on Clay Foundations API 7 Characterization of Soil Behavior Under Cyclic

Loading as Applied to the Foundation Design ofOffshore Structures

API 8 Centrifuge Studies of Cyclic Lateral Load-Displacement Behavior of Single Piles

API 9 A Model Study of Axially Loaded Pile SegmentsIncluding Pore Pressure Measurements

API 9-A AXCOL 3: A Program for Discrete-Element Solutionof Axially Loaded Members with Linear orNonlinear Supports


API 9C Axcol 3: a Program for Discrete-Element Solutionof Axially Loaded Members with Linear orNonlinear Supports

API 10 Development of Methods to Predict Pressure Dropand Closure Conditions for Velocity-TypeSubsurface Safety Valves

API 11 Field Tests of Small-Scale Pile Segments in aSoft Clay Deposit under Repeated Axial Loading

API 12 Influence of Sea Water and Cathodic Protectionupon Fatigue of Welded Steel Plates, asApplicable to Offshore Structures

API 13 Axially-Loaded Centrifuge Pile Tests API 13 Cyclic Lateral Loading of Piles; Analysis of

Centrifuge Tests Errata API 13-A Analysis of Centrifuge Pile Tests; Simulation of

Pile-Driving API 14 Inelastic Cyclic Behavior of Tubular Braced

Frames API 15 Probability-Based Fatigue Design Criteria for

Offshore Structures API 16 Local Buckling of Cylindrical Tubular Columns

Made of A-36 Steel API 17 Review of Gas Analysis Techniques for Application

to Combustible Gas Detectors API 19 Strain Gage Test Results for Proposed 1-13/16 and

7-1/16 30,000 psi Rated API Flanges API 26 Stage 1 - Baseline Analysis Earthquake Analysis

Studies for Offshore Stuctures API 26 Stage II - Time History Analyses Earthquake

Analytical Studies for Offshore Structures API 78-18 Strain Gage Test Results for Proposed 1-13/16 and

7-1/16 30,000 psi Rated API Flanges API 78-28 Review of the State-of-the-Art of Oil Spill

Simulation Models API 79-12 Influence of Sea Water and Cathodic Protection

upon Fatigue of Welded Steel Plates as Applicableto Offshore Structures

API 79-20 The Propagating Buckle in Marine Pipelines API 79-21 Analysis of Flange and Clamp Joints Exposed to a

Fire Environment API 79-22 Applicability of Reliability Analysis in Offshore

Design Practice API 79-23 Development of an Analytical Model for the

Ultimate Capacity of Axially Loaded Grouted Pileto Jacket Connections

API 79-24 Plant Uptake and Accumulation of Metals Derivedfrom Drilling Fluids

API 79-25 Inelastic Structural Modeling of Braced OffshorePlatforms for Seismic Loading

API 79-27 Establishment Parameters to Which Gas DetectorEquipment is Exposed in Offshore Oil and GasProduction Operations

API 79-28 Review of the State-of-the-Art of Oil SpillSimulation Models Phase I

API 79-28 Review of the State-of-the-Art of Oil SpillSimulation Models Phase II

API 79-28 Review of the State-of-the-Art of Probabilistic


Oil Spill Simulation API 79-28 Review of the State-of-the-Art of Oil Spill

Simulation Models API 80-15 Probability-Based Fatigue Design Criteria for

Offshore Structures API 80-22 Guidelines for Calibrating API RP2A for

Reliability-Based Design API 80-24 Agronomic Impacts Resulting from Land Disposal of

Used Drilling Fluids and Cuttings API 80-26A Acceleration Time Histories for Earthquake

Analysis Studies of Offshore Structures API 80-26B Earthquake Analysis Studies for Offshore

Structures Stage II - Time History Analysis API 80/27 Cyclic Inelastic Bahavior of Steel Offshore

Structures API 80-29 Review and Compilation of File Test Results Axial

File Capacity API 80-30A Collapse Performance of HC-95 Casing API 80-30B Collapse Resistance of Mill Selected High

Collapse Grade 95 Casing API 80-31 Hydrodynamic Coefficients for Cylinders with

Pronounced Marine Growths API 80-31B Hydrodynamic Coefficients for Cylinders with

Pronounced Marine Growths API 80-32 Shaking Table Tests of a Tubular Steel Frame

Model API 80-33 Effects of Fire Environment on Pressure

Capability of Standard API and ANSI Connections API 80-34 Spectrum Fatique Properties of Welded Steel as

Applicable to Offshore Structures Errata API 80-35 Drill Pipe/Casing Protector Performance Testing API 81-15 Probability-Based Fatigue Design Criteria for

Offshore Structures API 81-22 Utilization of a Reliability-Based API RP2A

Format on a Platform Design API 81-29 Review and Compilation of Pile Test Results Axial

Pile Capacity API 81-33 Effects of Fire Environment on Pressure

Capability of Standard API and ANSI ConnectionsTesting and Revised Analytical Procedure

API 81-34 Spectrum Fatigue Properties of Welded Steel asApplicable to Offshore Structures

API 81-37 Collapse Performance of Fabricated CylindersUnder Combined Axial Tension and ExternalPressure

API 81-38 Experimental Study on the Effect of Axial Loadingon Collapse Resistance of Casing

API 81-39 Rheological Evaluation of Cement Slurries API 81-40 Chord Stress Effects on the Ultimate Strength of

Tubular Joints API 81-43 Analysis of Trace Metals in Drilling Fluid Barite API 82-22 Utilizing a Reliability-Based API RP2A Format API 82-31 Hydrodynamic Coefficients for Cylinders Roughened

by Marine Growths from the Gulf of Mexico API 82-34 Variable Deflection Fatigue Properties of Welded

Steel as Applicable to Offshore Structures API 82-36 Development of Methods for the Evaluation of


Perforators API 82-39 Rheological Evaluation of Cement Slurries API 82-41-1 Evaluation of P-Y Relationships in Sands API 82-41-2 Evaluation of P-Y Relationships in Clays API 82-45 Rheological Characterization of Fracturing Fluids API 82/83-46 Collapse Tests of Fabricated Cylinders Under

Combined Axial Compression and External Pressure API 83-22 Implementation of a Reliability-Based API RP2A

Format API 83-31 Hydrodynamic Coefficients for Cylinders Covered

with Soft Organisms, Particularly Sea Anemones API 83-33 Prediction of Performance of 2"-6" ANSI Flanges

and 2 1/16"-7 1/16" API Clamps and Flanges inStandard Fire Environment

API 83-34 Variable Deflection Fatigue Properties of WeldedSteel as Applicable to Offshore Structures

API 83-42 Influence of Cyclic Loading on Axially LoadedPiles in Clay

API 83-42B Analysis of Pile Response under Axial Loads API 83-45 Rheological Characterization of Fracturing Fluids API 83-47 Technical Summary Shake Table Correlation Project API 83-48 Fatigue of Selected High Strength Steels in Sea

Water API 83-49A Planning and Final Engineering for Drilling and

Completion of Two CBL Standardization Wells API 83-50 Interlaboratory and Intralaboratory Comparision

of the API Drilling Fluids Bioassay Protocol API 84-31 Hydrodynamic Coefficients for Marine Roughened

Cylinders Addendum October 1986 API 84-33 Fire Testing of API Connections with Conditions

of Offshore Platform Well Bay Fire API 84-39 Rheological Evaluation of Cement Slurries

- Correlation of Concentric Cylinder and TubeViscometers

API 84-45 Rheological Characterization of Fracturing Fluids API 84-51 Investigation of Pipe Thread Compounds API 84-52 An Evaluation of the Behavior and Analysis of

Laterally Loaded Pile Groups API 84-53 Investigation of Leak Resistance of API 8-Round

Connector API 84-54 Bending Capacity of Fabricated Pipe at Fixed Ends API 85-16 Stress Analysis of API Type 16B and 16BX Hubs API 85-22 Development of Preliminary Load and Resistance

Design Document for Fixed Offshore Platforms API 85-22 Seismic Load Effects Study Addendum API 85-24 Weld Profile and Plate Thickness Effects in

Fatigue as Applicable to Offshore Structures API 85-31 Hydrodynamic Coefficients for Marine-Roughened

Cylinders API 85-39 Laminar and Turbulent Flow of Cement Slurries in

Large Diameter Pipe API 85-45 Rheological Characterization of Fracturing Fluids API 85-48 Fatigue of Selected High Strength Steels in Sea

Water API 85-53 Investigation of Leak Resistance of API 8-Round

Connector API 85-54 Bending Capacity of Fabricated Pipe at End


Connections API 85-55 Earthquake Analysis for LRFD Calibration API 85-56 Collapse Tests of Short Tubular Columns Subjected

to Combined Loads API 86-17 Subsurface Safety Valve Research Study - Year 1 API 86-18 Weld Profile and Thickness Effects on Fatigue of

Tubular Welded Joints API 86-18 Weld Profile and Thickness Effects on Fatigue of

Tubular Welded Joints API 86-21 Capabilities of API Flanges under Combination of

Loading API 86-22 Load and Resistance Factor Design - Recommended

Practice for Approval API 86-29A Comparison of Measured Axial Load Capacities of

Steel Pipe Piles in Sand with CapacitiesCalculated Using the API Recommended Practice (RP2A)

API 86-29B Offshore Axial Pile Design Reliability API 86-36 Effects of Stress and Pore Pressure on

Penetration of Jet Perforators in Berea Sandstone API 86-45 Rheological Characterization of Fracturing Fluids API 86-51 Investigation of Pipe Thread Compounds API 86-53 Investigation of Leak Resistance of API Buttress

Connector API 86-54 Bending Capacity of Fabricated Pipe at End

Connections API 86-55 Tubular Member Strength Equations for LRFD API 86/87-56 Effects of External Hydrostatic Pressure on

Tubular Beam-Columns API 87-17 API 14A Subsurface Safety Valve Research Study

- Year 2 API 87-20 Environmental Event Combination Criteria Phase

I, Risk Analysis API 87-22 Load and Resistance Factor Design - Recalibration API 87-24 Weld Profile and Plate Thickness Effects in

Fatigue as Applicable to Offshore Structures API 87-24 Weld Profile and Plate Thickness Effects in

Fatigue as Applicable to Offshore StructuresProgress Report

API 87-29 Offshore Lateral Pile Design Reliability API 87-36 Further Effects of Stress on Penetration and Flow

Performance of Jet Perforators API 87-45 Rheology of Fracturing Fluid Gels API 87-48 Fatigue of Selected High Strength Steels in Sea

Water API 87-48 Fatigue of Selected High Strength Steels in Sea

Water - A Compilation of Material Properties API 87-53 Investigation of Leak Resistance of API Casing

Connections API 87-56 Hydrostatic Beam Column Test (Phase II) API 88-17 API 14A Subsurface Safety Valve Research Study

- Year 3 API 88-20 Environmental Event Combination Criteria Phase

II: Design Calibration and Directionality Effect API 88-21 Capabilities of API Integral Flanges under

Combination of Loading API 88-22 Load and Resistance Factor Design for Fixed


Offshore Platforms API 88-24 Weld Profile and Plate Thickness Effects in

Fatigue as Applicable to Offshore Structures API87-24

API 88-25 The Effect of Toughness on Tubular Good ServicePerformance

API 88-30 Specification Parameters Determination DrillingFluids Materials

API 88-36 Minimum Size and Stress Requirements for aPossible API Standard Test Target for PerformanceEvaluation of Shaped Charge Oil Well Perforatorsin Stressed Rock

API 88-51 Investigation of Pipe Thread Compounds API 89-17 API 14A Subsurface Safety Valve Research Study-

Year 4 API 89-21 Capabilities of Overbored API Threaded Flanges

under Combination of Loading API 89-21 Temperature Derating of API Flanges under

Combination of Loading API 89-22 Load and Resistance Factor Design - Updating and

Expanded Applications API 89-24 Weld Profile and Plate Thickness Effects in

Fatigue as Applicable to Offshore Structures API 89-25 Phase II - The Effect of Toughness on Tubular

Good Service Performances API 89-29 Offshore Pile System Reliability API 89-30 Specification Parameters Determination Drilling

Fluids Materials API 89-36 Application of Prototype Penetration and Flow

Tests in Stressed Targets to Several PerforatorCharges and Rocks

API 90-21 Sealability of API R, RX, & BX Ring Gaskets API 90-30 Specification Parameters Determination Drilling

Fluids Materials API 90-36 Investigation of Core Orientation and Perforation

Debris on Standard Perforation Flow Tests API 90-42 Axial Capacity of Piles in Sand API 90-48 Growth Rate of Small Fatigue Cracks as Relevant

to Higher Strength Steels for Offshore Structures API 90-48 Growth Rate of Short Fatigue Cracks as Relevant

to Higher Strength Steels for Offshore Structures API 90-56 Analysis Cylindrical Shell Database and

Validation of Design Formulations API 90-60 Cyclic Pressure Fatique Evaluation of High

Pressure Fiberglass Pipe API 90-61 Recommended Practice for Underwater Magnetic

Particle In-Service Weld Inspection of OffshoreFixed Platforms and Guidelines for Qualificationof Magnetic Particle Inspector Divers

API 90-62 Experimental Study of the Erosional/CorrosionalVelocity Citerion for Sizing Multiphase FlowLines Phase 1 - Experimental FacilityConstruction Report

API 90-63 Capabilities of Swivel Flanges under Combinationsof Loading

API 90-64 API Elastomer Test Program - Task B API 90-66 Wind-Induced Fatigue


API 91-20A Environmental Event Combination Criteria forTension Leg Platforms Phase I: Risk Analysis

API 91-51 Investigation of Pipe Thread Compounds API 91-62 Experimental Study of the Erosional/Corrosional

Velocity Criterion for Sizing Multiphase FlowLines Phase II-Experimental Results

API 91-67 Seismic Safety Requalification of OffshorePlatforms

API 91-70 Development of Make-up Procedures for FibreglassTubing

API 91-71 Proposal for New Nuclear Well Logging CalibrationFacility

API 92-30 Specification Parameters for Drilling FluidProducts

API 92-48 Growth Rate of Short Fatigue Cracks as Relevantto Higher Strength Steels for Offshore Structures

API 92-56 Analysis of Cylindrical Shell Database andValidation of Design Formulations (Phase 2: forD/t Values > 300)

API 92-66 Vortex-Induced Vibrations of Structural Membersin Unsteady Winds

API 92-68 Large Scale Natural Gas/Kerosine Mixed Fuel JetFires

API 92-70 Development of Procedures to Define a ReliabilityBased Specification for the Make-Up of FRP 8-Round Connections

API 92-72 API RP 5C5 Class III Test Summary ConnectionEvaluation API Proposed TSA Tubing on 2-7/8" - 6.5 PPF L80 Pipe

API 92-75 Weld Profile Effects and Fatigue Life Improvementto American Petroleum Institute Offshore TubularJoint Research Center

API 93-77 Influence of Cathodic Protection on the FatigueLife of Welded Connections in Seawater

API 93-85 Report for API 11V2 Verification Tests: Part 1 - Review of Gas Lift Valve Testing Facility

API 94-62 Erosion/Corrosion Testing for Multiphase FlowLines

API 94-81 Further Evaluation of Offshore StructuresPerformance in Hurricane Andrew - Development ofBias Factors for Pile Foundation Capacity

API 117 Thermal Properties of Hydrocarbon Bearing Rocksat High Temperatures and Pressures

API 118 Tests of Fabricated Tubular Columns API 119 Ground Motion Intensity Factors and Acceleration

Response Spectra Ninth Edition API RP 2AEarthquake Design Provisions Eastern Gulf ofAlaska Region

API 120 Bending Moment Capacity Calculations for SpecialAPI Clamp/Hub Combinations

API 1114-5 Ultrasonic Testing Requirements for Single-SidedButt Welds in Offshore Fabrications

worldwide standards plus issue 98-08 reproduced from ...weldingcode.com/uploads/1583485650.pdfapi...

Documents