HP Stream 13-c010nr Display ReplacementFollow this guide to replace the screen on your HP Stream 13-c010nr laptop.

Written By: Keegan Lapham

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7

INTRODUCTION

This guide will show how to replace the display on the HP Stream 13-c010nr. If your screen iscracked or damaged, you can follow this guide to repair it.

TOOLS:Phillips #0 Screwdriver (1)Spudger (1)Precision Tweezers Set (1)

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 7

Step 1 — HP Stream 13-c010nr Disassembly

Remove the five rubber feet from thebottom of the laptop with a plasticopening tool.

Step 2

Remove the thirteen 5mm Phillips #0 screws from the bottom case.

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 7

Step 3

Flip the laptop over and open it up.

Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate thetwo pieces.

Lift up the keyboard.

Ribbon cables still connect the two pieces.

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 7

Step 4

Use a spudger to flip up theretaining flaps on the keyboardribbon cable ZIF sockets.

Pull up the ribbon cables from theirsockets.

Step 5 — Display

Remove the screw covers from thebottom corner edges of the screen.

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 7

Step 6

Remove the two 5mm Phillips #0 screws from the screen bezel.

Step 7

Wedge the plastic opening tool between the frame of the screen and the casing of the laptop.

Pry upwards on the plastic opening tool to separate the bezel from the display.

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 7

To reassemble your device, follow these instructions in reverse order.

Step 8

Remove the four 3mm Phillips #0screws from the screen.

Step 9

Use a spudger to flip up theretaining flap on the screen ribboncable ZIF socket.

Pull the ribbon cable out of the ZIFsocket.

Remove the screen.

HP Stream 13-c010nr Display Replacement Draft: 2018-06-27Guide ID: 106475 -

This document was generated on 2019-10-04 07:13:07 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 7