wsg-08 wsg-19 wsg-25 wsg-29
TRANSCRIPT
EXCE
LLEN
CE IN
SO
LUTI
ON
SANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGE
DRIVE SYSTEM FOR ROPE LIFTS
WSG-08WSG-19WSG-25WSG-29
beamer 2
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Produktspektrum getriebefreie AufzugsmaschinenProduct range gearless traction machines
Seite/page 2
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
WITTUR Electric Drives GmbH in Dresden liefert ein umfangrei-ches Spektrum an Aufzugsmaschinen, die bei einer 2:1 Aufhän-gung einen Nutzlastbereich von 320 kg … 5,5 t abdecken.
Diese kompakten getriebelosen Aufzugsmaschinen zeichnen sichdurch einen hohen Wirkungsgrad, äußerst geringe Geräuschbil-dung und extrem gute Gleichlaufeigenschaften aus.
Als Nenndrehzahlen stehen mehrere Varianten zur Verfügung. Sielassen sich kundenspezifisch weiter anpassen. Alle Maschinenhaben baumustergeprüften Sicherheitsbremsen, die als Schutz-einrichtung gegen die unkontrollierte Fahrkorbbewegung nachoben eingesetzt werden können. Auch sind diese Bremsen fürUCM-Lösungen gemäß EN 81-1:1998 + A3:2009 nutzbar.
WITTUR Electric Drives GmbH in Dresden offers a comprehensiverange of lift machines covering a load capacity range from320 kg to 5.5 tonnes with a suspension ratio of 2:1.
These compact gearless lift machines are distinguished by theirhigh efficiency, extremely low noise and excellent smooth run-ning.
Several rated speed options are available and can be furtheroptimised to meet customer requirements. All machines areequipped with type-tested safety brakes which can be used asprotection against uncontrolled upward car movement. Thesebrakes can also be used for UCM solutions in accordance withEN81-1:1998 + A3:2009.
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Produktspektrum getriebefreie AufzugsmaschinenProduct range gearless traction machines
Seite/page 3
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice! Änderungen vorbehalten! Subject to changes without notice! Änderungen vorbehalten! Subject to changes without notice!
beamer 2
WSG-08 WSG-W8 WSG-19 WSG-25 WSG-29
Aufh
ängu
ngsu
spen
sion
2 : 1
Nutz last bis zufor loads up to
[kg] 16001300 (Backenbremse/shoe brake)
2050 3000 4000 5000
Geschwindigkeitspeed
[m/s] 0,6 ... 2,5 0,6 ... 2,5 1,0 ... 4,0 1,0 ... 5,0 1,0 ... 5,0
zulässige Achslast permissible shaft load
[kN] 55 45 (90) 140 180 ... 200 300
EG Baumuster prüfungEC type-examination certificate
ABV 716/4ABV 595/2
ABV 716/4 ABV 767/2 ABV 908 ABV 822
Motortypmotor type synchron / synchronous
Abmessungen (ca.)dimension (approx.)
[mm] 836 x 720 x 404 803 x 1118 x 711 875 x 920 x 980 1000 x 1092 x 1275 1220 x 1110 x 1380
Masse (ca.) weight (approx.)
[kg] 280 ... 420 620 ... 804 780 ... 1000 1775 ... 1925 2610 ... 2825
UL-CSA ZulassungUL-CSA approval ja / yes nein / no ja / yes nein / no ja / yes
Anwendungs empfehlungenapplication
Ideal für schnelle leistungsfähige Aufzüge mit exzellentem Fahrkomfort und geringem Energieverbrauch; zukunftsweisendes elektromagnetisches Design.Ideal for fast, high-efficiency lifts, providing excellent travelling comfort, advanced electro-magnetic design.
Bei Bedarf können die Maschinen mit kompatiblem Frequenzum-richter und weiteren Zubehör geliefert werden.
Sofern nicht anders vermerkt sind alle Maße in Millimeter (mm)angegeben.
The machines are available with a compatible inverter and otheraccessories, if required.
Unless otherwise stated all dimensions are specified in millimetres (mm).
calipier disk brakeZangen-Scheibenbremse
shoe brakeBackenbremse
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Getriebefreie Synchron Aufzugsmaschinen WSG-08 (mit Zangen- Scheibenbremse)
Gearless synchronous traction machines WSG-08 (with multi-pole spring operated brake)
Seite/page 4
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
Merkmale
• Für Aufzüge mit exzellentem Fahrkomfort
• Hoher Wirkungsgrad, geringer Energieverbrauch, extrem geräuscharm
• Stabile Konstruktion für zulässige Achskräfte FS an derTreibscheibe bis zu 55.000 N
• Sicherheitsbremssystem mit elektromag netischer Lüftung,zwei/drei Zangen- Scheibenbremsen mit Halte-Bremsmo-ment 2/3 x 925 Nm, Handlüftung, Schaltkontakte für Brems enkontrolle
• EG-Baumusterprüfbescheinigung gemäß EN 81-1; für UCMLösungen nutzbar (EN 81-1:1998 + A3:2009)
• Wechselbare Treibscheibe, formschlüssig mit dem Rotor verbunden
• Rillenprofil anlagenspezifisch
• Elektromotor optimal ausgelegt, Verwendung von Hochleistungs-Permanentmagneten, Schutzart IP 41, Isolierstoffklasse 155 (F), Temperaturüberwachung
• Motor 2,3-fach überlastbar
• Mess-Systeme umrichterkompatibel, drehsteif angekuppeltoder integriert (z. B. ECN 1313; ERN 1387)
• Anpassfähige Optionen bei Spannung, Drehzahl, Drehmoment,Mess-System und Treibscheibenparameter
• Option: UL-CSA zugelassen
Lieferumfang
• Getriebefreier synchroner Außenläufer-Antrieb mit
Treibscheibe
Bremssystem
Mess-System (Encoder)
• Mechanische Rückholeinrichtung (Option)
• Bowdenzug-Fernbedienung für Bremse (Option)
• Anschlusskabel für Mess-System und Motor (Option)
• Abnahmerelevante technische Unterlagen und ausführlicheBetriebsanleitung
Die Angaben in diesem Prospekt dienen nicht der Projek tierung.Hierzu verwenden Sie bitte unseren Katalog. Auf die einschlägigen Patente (z. B. der Firma KONE) für denmaschinenraumlosen Aufzug wird hingewiesen.
Features
• For lifts with an excellent ride comfort• High efficiency, reduced power consumption,
extreme low-noise level • Solid construction for permissible shaft loads FS at the
traction sheave up to 55,000 N• Safety brake system with electro-magnetical release,
two/three multi-pole spring-operated brakes with a holdingbraking torque 2/3 x 925Nm, manual brake release, contacts for brake control
• EC type-examination certificate according to EN 81-1, can beused for UCM solution (EN 81-1:1998 + A3:2009)
• Interchangeable traction sheave, positive locking withrotor
• Groove profiles according to lift system• Perfectly rated motor, use of high- performance permanent
magnets, degree of protection IP 41, insulation class 155 (F), temperature control
• Motor with 2.3 x overload capacity• Inverter compatible measuring devices, rigid coupling or
integrated (e. g. ECN 1313; ERN 1387)• Variable options regarding voltage, speed, torque, measuring
system and traction sheave parameters • Option: UL-CSA approved
Content of supply
• Gearless synchronous external rotor drive withTraction sheaveBraking system Measuring system (encoder)
• Mechanical evacuation system (option)• Remotely controlled bowden cable for brake (option)• Connecting cable for encoder and motor (option)• All technical documents necessary for approval and
detailed operation manual
The data contained in this brochure do not serve project plan-ning purposes. For this, please refer to our catalogue. We wouldlike to refer to the appropriate patents (e. g. of the KONE company) regarding lifts without machine room.
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Seite/page 5
Datum/date 28.02.2013
Stand/version 0.21
Mitte Treibkranz
tract
ion
shea
vece
ntre
Mitte Treibkranz
tract
ion
shea
vece
ntre
0
0
Motor / motor
synchron / synchronous 22-polig / 22-pole
WSG-08.1 WSG-08.2 WSG-08.3 WSG-08.4Drehmoment / torqueS3-40%, 240 S/h MN [Nm] 460 590 740 1100Treibscheibe / sheave ÆDT [mm] 340 400 340 400 340 400 400
Q [kg] bis /up to 800 bis /up to 630 bis /up to 1000 bis /up to 850 bis /up to 1300 bis /up to 1150 bis /up to 1600
Aufhängung / suspension Tabelle gilt für / table applies for 2:1
Motorströme gelten für500...620 V Zwischen -kreisspannung
Motor currents applicableto 500...620 V d.c. link voltage
v nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN[m/s] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A]
0,6 67 3,2 12,0 60 2,9 12,0 67 4,1 14,8 60 3,7 14,8 67 5,2 18,5 60 4,6 18,5 60 6,9 28,5
1,0 112 5,4 17,3 95 4,6 12,0 112 6,9 21,7 95 5,9 14,8 112 8,7 26,9 95 7,4 18,5 95 10,9 28,5
1,25 140 6,7 17,3 119 5,7 17,3 140 8,6 21,7 119 7,4 21,7 140 10,8 26,9 119 9,2 26,9 119 13,7 43,0
1,6 180 8,7 19,8 153 7,4 17,3 180 11,1 25,7 153 9,5 21,7 180 13,9 31,6 153 11,9 26,9 153 17,6 43,0
1,75 197 9,5 25,0 167 8,0 19,8 197 12,2 31,7 167 10,3 25,7 197 15,3 41,3 167 12,9 31,6 167 19,2 46,0
2,0 225 10,8 25,0 190 9,2 25,0 225 13,9 31,7 190 11,7 31,7 225 17,4 41,3 190 14,7 41,3 190 21,9 62,5
2,5 240 11,6 25,0 240 14,8 31,7 240 18,6 41,3 240 27,6 62,5
Treibscheibe /traction sheave
ÆDT BT C
LT
Masse/w
eigh
tmT
[kg]
Trägheitsmom
ent
iner
tiaJ T
[kgm
2 ] FS [kN]bis / up tonN [rpm]WSG-
08.1 08.2 08.3 08.4 153 240
400DR = 356
60 61 250 286 286
-
16 0,4755
4570 66 260 296 296 17 0,52
82 72 272 308 308 18 0,57 50
90 76 280 316 316 22 0,63
4540
124 147 - - - 404 32 0,82
340DR = 296
70 86 280 316 316-
16 0,47 5040
95 98,5 305 341 341 22 0,63 45
Motor / motor WSG- 08.1 08.2 08.3 08.4F 184 220 220 220
FL 134 170 170 170
LM 260 296 296 350
Masse / weight mM [kg] 282 310 324 397
Trägheitsmomentinertia JM [kgm2] 2,8 3,0 3,2 3,3
Änderungen vorbehalten! Subject to changes without notice!
*) Richtwerte. Die erziel-bare Nennlast ist ab -hängig von den spe-ziellen Anlagedaten. /Reference values.Achievable nominalload depends on spe-cific lift system data.
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Getriebefreie Synchron Aufzugsmaschinen WSG-08 (mit Doppel-Backenbremse)
Gearless synchronous traction machines WSG-08 (with twin shoe brake)
Seite/page 6
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
Merkmale
• Für Aufzüge mit exzellentem Fahrkomfort
• Hoher Wirkungsgrad, geringer Energieverbrauch, extrem geräuscharm
• Stabile Konstruktion für zulässige Achskräfte FS an derTreibscheibe bis zu 55.000 N
• Zweikreis-Sicherheitsbremssystem mit elektromag netischerLüftung, Doppel-Backenbremse (vorein ge stellt auf 2 x 1,25MN, max. Bremsmoment 2 x 925 Nm) Handlüftung, Schaltkontakte für Brems enkontrolle
• EG-Baumusterprüfbescheinigung gemäß EN 81-1; für UCMLösungen nutzbar (EN 81-1:1998 + A3:2009)
• Wechselbare Treibscheibe, formschlüssig mit dem Rotor verbunden
• Rillenprofil anlagenspezifisch
• Elektromotor optimal ausgelegt, Verwendung von Hochleistungs-Permanentmagneten, Schutzart IP 41, Isolierstoffklasse 155 (F), Temperaturüberwachung
• Motor 2,3-fach überlastbar
• Mess-Systeme umrichterkompatibel, drehsteif angekuppeltoder integriert (z. B. ECN 1313; ERN 1387)
• Anpassfähige Optionen bei Spannung, Drehzahl, Drehmoment,Mess-System, Bremsmoment und Treibscheibenparameter
• Option: UL-CSA zugelassen
Lieferumfang
• Getriebefreier synchroner Außenläufer-Antrieb mit
Treibscheibe
Bremssystem
Mess-System (Encoder)
• Mechanische Rückholeinrichtung/Seilklemme (Option)
• Bowdenzug-Fernbedienung der Bremse (Option)
• Anschlusskabel für Mess-System und Motor (Option)
• Abnahmerelevante technische Unterlagen und ausführlicheBetriebsanleitung
Die Angaben in diesem Prospekt dienen nicht der Projek tierung.Hierzu verwenden Sie bitte unseren Katalog. Auf die einschlägigen Patente (z. B. der Firma KONE) für denmaschinenraumlosen Aufzug wird hingewiesen.
Features
• For lifts with an excellent ride comfort• High efficiency, reduced power consumption,
extreme low-noise level • Solid construction for permissible shaft loads FS at the
traction sheave up to 55,000 N• Double-disc safety brake system with electro-magnetical
release, twin shoe brake (factory default setting 2 x 1.25MN , max. braking torque 2 x 925Nm), manual brake release,contacts for brake control
• EC type-examination certificate according to EN 81-1, can beused for UCM solution (EN 81-1:1998 + A3:2009)
• Interchangeable traction sheave, positive locking withrotor
• Groove profiles according to lift system• Perfectly rated motor, use of high- performance permanent
magnets, degree of protection IP 41, insulation class 155 (F), temperature control
• Motor with 2.3 x overload capacity• Inverter compatible measuring devices, rigid coupling or
integrated (e. g. ECN 1313; ERN 1387)• Variable options regarding voltage, speed, torque, measuring
system, braking torque and traction sheave parameters • Option: UL-CSA approved
Content of supply
• Gearless synchronous external rotor drive withTraction sheaveBraking system Measuring system (encoder)
• Mechanical evacuation system / rope clamp (option)
• Remotely controlled bowden cable for brake (option)• Connecting cable for encoder and motor (option)• All technical documents necessary for approval and
detailed operation manual
The data contained in this brochure do not serve project plan-ning purposes. For this, please refer to our catalogue. We wouldlike to refer to the appropriate patents (e. g. of the KONE company) regarding lifts without machine room.
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Seite/page 7
Datum/date 28.02.2013
Stand/version 0.21
Motor / motor
synchron / synchronous 22-polig / 22-pole
WSG-08.1 WSG-08.2 WSG-08.3Drehmoment / torqueS3-40%, 240 S/h MN [Nm] 460 590 740Treibscheibe / sheave ÆDT [mm] 340 400 340 400 340 400
fürNennlasten /for loads * Q [kg] bis /up to 800 bis /up to 630 bis /up to 1000 bis /up to 850 bis /up to 1300 bis /up to 1150
Aufhängung / suspension Tabelle gilt für / table applies for 2:1
Motorströme gelten für500...620 V Zwischen -kreisspannung
Motor currents applicableto 500...620 V d.c. link voltage
v nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN[m/s] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A]
0,6 67 3,2 12,0 60 2,9 12,0 67 4,1 14,8 60 3,7 14,8 67 5,2 18,5 60 4,6 18,5
1,0 112 5,4 17,3 95 4,6 12,0 112 6,9 21,7 95 5,9 14,8 112 8,7 26,9 95 7,4 18,5
1,25 140 6,7 17,3 119 5,7 17,3 140 8,6 21,7 119 7,4 21,7 140 10,8 26,9 119 9,2 26,9
1,6 180 8,7 19,8 153 7,4 17,3 180 11,1 25,7 153 9,5 21,7 180 13,9 31,6 153 11,9 26,9
1,75 197 9,5 25,0 167 8,0 19,8 197 12,2 31,7 167 10,3 25,7 197 15,3 41,3 167 12,9 31,6
2,0 225 10,8 25,0 190 9,2 25,0 225 13,9 31,7 190 11,7 31,7 225 17,4 41,3 190 14,7 41,3
2,5 240 11,6 25,0 240 14,8 31,7 240 18,6 41,3
Treibscheibe /traction sheave
ÆDT BT C
LT
Masse/w
eigh
tmT
[kg]
Trägheitsmom
ent
iner
tiaJ T
[kgm
2 ] FS [kN]bis / up tonN [rpm]WSG-
08.1 08.2 08.3 153 240
400DR = 356
60 61 250 286 286 16 0,4755
4570 66 260 296 296 17 0,52
82 72 272 308 308 18 0,57 50
90 76 280 316 316 22 0,63 45 40
340DR = 296
70 86 280 316 316 16 0,47 5040
95 98,5 305 341 341 22 0,63 45
Motor / motor WSG- 08.1 08.2 08.3F 184 220 220
FL 134 170 170
LM 260 296 296
LB 626 616 606
Masse / weight mM [kg] 279 307 321Trägheitsmomentinertia JM [kgm2] 2,4 2,6 2,8
Änderungen vorbehalten! Subject to changes without notice!
*) Richtwerte. Dieerzielbare Nennlastist abhängig von denspeziellen Anlagedat-en. / Reference val-ues. Achievable nom-inal load depends onspecific lift systemdata.
Merkmale
• Für Aufzüge mit exzellentem Fahrkomfort
• Hoher Wirkungsgrad, geringer Energieverbrauch, extrem geräuscharm
• Stabile Konstruktion für zulässige Achskräfte FS an derTreibscheibe bis zu 140.000 N
• Zweikreis-Sicherheitsbremssystem mit elektromag netischerLüftung, Doppel-Backenbremse (vorein ge stellt auf 2 x 1,25MN, max. Bremsmoment 2x2.400Nm bei WSG-19.1/2 bzw.2 x 3.200 Nm bei WSG-19.4), Handlüftung, Schaltkontaktefür Brems enkontrolle
• EG-Baumusterprüfbescheinigung gemäß EN 81-1; für UCMLösungen nutzbar (EN 81-1:1998 + A3:2009)
• Wechselbare Treibscheibe aus Sphäroguss, formschlüssig mitdem Rotor verbunden
• Rillenprofil anlagenspezifisch
• Elektromotor optimal ausgelegt, Verwendung von Hochleistungs-Permanentmagneten, Isolierstoffklasse 155 (F),Schutzart IP23M/IP12S, geräuscharme Fremdbelüftung,Temperaturüberwachung, Klemmenkasten
• Motor 2-fach überlastbar
• Mess-Systeme umrichterkompatibel, drehsteif angekuppeltoder integriert (z. B. ECN 1313; ERN 1387)
• Anpassfähige Optionen bei Spannung, Drehzahl, Drehmoment,Mess-System, Bremsmoment und Treibscheibenparameter
• Option: UL-CSA zugelassen
Lieferumfang
• Getriebefreie synchrone Aufzugsmaschine mit
Treibscheibe
Bremssystem
Mess-System (Encoder)
• Mechanische Rückholeinrichtung/Seilklemme (Option)
• Anschlusskabel für Mess-System und Motor (Option)
• Abnahmerelevante technische Unterlagen und ausführlicheBetriebsanleitung
Die Angaben in diesem Prospekt dienen nicht der Projek tierung.Hierzu verwenden Sie bitte unseren Katalog.
Features
• For lifts with an excellent ride comfort• High efficiency, reduced power consumption,
extreme low-noise level • Solid construction for permissible shaft loads FS at the
traction sheave up to 140,000 N• Double-disc safety brake system with electro-magnetical
release, twin shoe brake (factory default setting 2 x 1.25 MN , max. braking torque 2x2,400Nm for WSG-19.1/2 and 2x3,200Nm for WSG-19.4), manual brakerelease, contacts for brake control
• EC type-examination certificate according to EN 81-1, can beused for UCM solution (EN 81-1:1998 + A3:2009)
• Interchangeable traction sheave in ductile cast iron, positive locking with rotor
• Groove profiles according to lift system• Perfectly rated motor, use of high- performance
permanent magnets, insulation class 155 (F), degree of protection IP23M/IP12S, low noise ventilation, temperature control, terminal box
• Motor with 2 x overload capacity• Inverter compatible measuring devices, rigid coupling or
integrated (e. g. ECN 1313; ERN 1387)• Variable options regarding voltage, speed, torque, measu-
ring system, braking torque and traction sheave parameters
• Option: UL-CSA approved
Content of supply
• Gearless synchronous lift machine withTraction sheaveBraking system Measuring system (encoder)
• Mechanical evacuation system / rope clamp (option)• Connecting cable for encoder and motor (option)• All technical documents necessary for approval and
detailed operation manual
The data contained in this brochure do not serve project planning purposes. For this, please refer to our catalogue.
Seite/page 8
Datum/date 28.02.2013
Stand/version 0.21
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Getriebefreie Synchron Aufzugsmaschinen WSG-19Gearless synchronous traction machines WSG-19
Änderungen vorbehalten! Subject to changes without notice!
Treibscheibe /traction sheave
ÆDT BT C K DR
L
Masse/w
eigh
tmT
[kg]
Trägheitsmom
ent
iner
tiaJ T
[kgm
2 ]
FS[kN]]
WSG-
19.1 19.2 19.4
420 175 152 87,5 350 684,5 817,5 904,5 138 4,8 140
530 195 159 97,5 475 701,5 834,5 921,5 165 8 140
650 230 197 115 590 759 892 979 215 17,6 120
Motor / motor WSG- 19.1 19.2 19.4
Masse / weight mM [kg] 640 756 835
Trägheitsmomentinertia JM [kgm2] 1,5 2,2 2,6
1)
1)
1)
Motor / motor
synchron / synchronous 22-polig / 22-poles
WSG-19.1 WSG-19.2 WSG-19.4
Drehmoment /torqueS3-40%, 240 S/h 1200 1900 2500
Treibscheibe /sheave ÆDT 420 530 650 420 530 650 420 530 650
für Nennlasten/for loads *) Q bis /upto 1700 bis /upto 1350 bis /upto 1100 bis /upto 2500 bis /upto 2000 bis /upto 1600 bis /upto 3600 bis /upto 3000 bis /upto 2500
Aufhängung /suspension Tabelle gilt für / table applies for 2:1
Motorströme gelten für500...620 V Zwischen -kreisspannung
Motor currents applica-ble to 500...620 V d.c.link voltage
v nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN nN PN IN[m/s] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A]
1,0 91 11,4 34 72 9,0 28 59 7,4 28 91 18,1 49 72 14,3 40,5 59 11,7 40,5 91 23,8 70 72 18,8 59,5 59 15,4 59,5
1,6 146 18,3 49 115 14,5 49 94 11,8 34 146 29,0 73 115 22,9 73 94 18,7 49 146 38,2 97 115 30,1 97 94 24,6 70
2,0 182 22,9 58 144 18,1 49 118 14,8 49 182 36,2 92 144 28,7 73 118 23,5 73 182 47,6 131 144 37,7 97 118 30,9 97
2,5 227 28,5 75 180 22,6 58 147 18,5 49 227 45,2 103 180 35,8 92 147 29,2 73 227 59,4 156 180 47,1 131 147 38,5 97
3,0 273 34,3 84 216 27,1 75 176 22,1 58 273 54,3 121 216 43,0 103 176 35,0 92 273 71,5 195 216 56,5 156 176 46,1 131
3,5 318 40,0 94 252 31,7 84 206 25,9 75 318 63,3 145 252 50,1 121 206 41,0 103 318 83,3 195 252 66,0 195 206 53,9 156
4,0 364 45,7 108 288 36,2 94 235 29,5 84 364 72,4 185 288 57,3 145 235 46,8 121 288 75,4 195 235 61,5 195
MN [Nm]
*) Richtwerte. Dieerzielbare Nennlastist abhängig von denspeziellen Anlagedat-en. / Reference val-ues. Achievable nom-inal load depends onspecific lift systemdata.
Seite/page 9
Datum/date 28.02.2013
Stand/version 0.21
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Änderungen vorbehalten! Subject to changes without notice!
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Getriebefreie Synchron Aufzugsmaschinen WSG-25Gearless synchronous traction machines WSG-25
Seite/page 10
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
Merkmale
• Für schnelle Aufzüge mit exzellentem Fahrkomfort (bei Aufhängung 2:1 bis 5 m/s)
• Compakt und äußerst leistungstark
• Hoher Wirkungsgrad, geringer Energieverbrauch, extrem geräuscharm
• Stabile Konstruktion für zulässige Achskräfte FS an der Treibscheibe bis zu 200.000 N
• Sicherheits bremse, baumustergeprüft nach EN 81-1, fürUCM Lösungen nutzbar (EN 81-1:1998 + A3:2009),optionale Handlüftung
• Wechselbare Treibscheibe aus Sphäroguss, formschlüssig mit dem Rotor verbunden
• Rillenprofil anlagenspezifisch
• Elektromotor optimal ausgelegt, Verwendung von Hochleis-tungs-Permanentmagneten, Isolierstoffklasse 155 (F),geräuscharme Fremdbelüftung, Temperaturüberwachung,Klemmenkasten
• Mess-Systeme umrichterkompatibel, drehsteif angekuppeltoder integriert (z. B. ECN 413; ERN 487)
• Anpassfähige Optionen bei Spannung, Drehzahl, Drehmoment, Mess-System, Bremsmoment und Treibscheibenparameter
Lieferumfang
• Getriebefreie synchrone Aufzugsmaschine mit
Treibscheibe
Bremssystem
Mess-System (Encoder)
• Mechanische Rückholeinrichtung (Option)
• Anschlusskabel für Mess-System und Motor (Option)
• Abnahmerelevante technische Unterlagen und ausführlicheBetriebsanleitung
Die Angaben in diesem Prospekt dienen nicht der Projek tierung.Hierzu verwenden Sie bitte unseren Katalog.
Features
• For fast lifts with an excellent ride comfort (suspension 2:1 up to 5m/s)
• Compact and extreme powerful• High efficiency, reduced power consumption,
extreme low-noise level • Solid construction for permissible shaft loads FS at the
traction sheave up to 200,000 N• Fail-safe brake, type-tested to EN 81-1, can be used for
UCM solution (EN 81-1:1998 + A3:2009), manual release as an option
• Interchangeable traction sheave in ductile cast iron, positive locking with rotor
• Groove profiles according to lift system• Perfectly rated motor, use of high- performance
permanent magnets, insulation class 155 (F), low noise ventilation, temperature control, terminal box
• Inverter compatible measuring devices, rigid coupling orintegrated (e. g. ECN 413; ERN 487)
• Variable options regarding voltage, speed, torque, measuring system, braking torque and traction sheave parameters
Content of supply
• Gearless synchronous lift machine withTraction sheaveBraking system Measuring system (encoder)
• Mechanical evacuation system (option)• Connecting cable for encoder and motor (option)• All technical documents necessary for approval and
detailed operation manual
The data contained in this brochure do not serve project planning purposes. For this, please refer to our catalogue.
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Seite/page 11
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
Treibscheibe /traction sheave
ÆDT BT C K DR
L
Masse/w
eigh
tmT
[kg]
Trägheitsmom
ent
iner
tiaJ T
[kgm
2 ]
FS[kN]]
WSG-
25.1 25.2
530 275 347 137,5 460 1271 1271 328 20,5 200
650 320 294,5 160 570 1231 1231 417 31,8 200
Motor / motor WSG- 25.1 25.2
Masse / weight mM [kg] 1448 1508
Trägheitsmomentinertia
JM [kgm2] 4,2 4,8
A A
FS
ØDT
BTca
. 945
113
L
20
450
n860
6x M24- 49 tief
Typ Masse Ø530 [kg] Masse Ø650 [kg] Masse [kg]xSG-25.1 1776 1865 1448xSG-25.2 1836 1925 1508
C7517017017075
n408x
900
970
1000
195195610
970
50
660
n45
n48
660
75C K
1037ca.
n48
ØD
T
DT BT C K DR 25.2 25.2 Masse TK Trägheitsmoment FS530 275 347 137,5 460 1271 1271 328 20,5 200650 320 294,5 160 570 1231 1231 417 31,8 200
ØDR
Motor / motor
synchron / synchronous 22-polig / 22-poles
WSG-25.1 WSG-25.2
Drehmoment /torque S1 MN [Nm] 1750 2200
Maximalmoment / max. torque Mmax [Nm] 4850 6100
Bremsmoment / braking torque MB [Nm] 2 x 2400 / 3 x 2400 2 x 2400 / 3 x 2400
Treibscheibe /sheave ÆDT [mm] 530 650 530 650
für Nennlasten /for loads *) Q [kg] bis /up to 2750 bis /up to 2250 bis /up to 3400 bis /up to 2750
Aufhängung /suspension Tabelle gilt für / table applies for 2:1
Motorströme gelten für500...620 V Zwischen -kreisspannung
Motor currents applicable to500...620 V d.c. link voltage
v nN PN IN nN PN IN nN PN IN nN PN IN[m/s] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A]
1,0 72 13,2 36,5 59 10,8 36,5 72 16,6 45 59 13,6 45
2,0 144 26,4 66 118 21,6 56 144 33,2 81 118 27,2 66
3,0 216 39,6 103 176 32,3 80 216 49,8 120 176 40,5 91
4,0 288 52,8 120 235 43,1 103 288 66,4 145 235 54,1 120
5,0 294 53,9 120 294 67,7 145
*) Richtwerte. Die erziel-bare Nennlast istabhängig von denspeziellen Anlagedaten./ Reference values.Achievable nominalload depends on spe-cific lift system data.
A A
FS
ØDT
BT
ca. 9
45
113
L
20
450
n860
6x M24- 49 tief
Typ Masse Ø530 [kg] Masse Ø650 [kg] Masse [kg]xSG-25.1 1776 1865 1448xSG-25.2 1836 1925 1508
C7517017017075
n408x
900
970
1000
195195610
970
50
660
n45
n48
660
75C K
1037ca.
n48
ØD
T
DT BT C K DR 25.2 25.2 Masse TK Trägheitsmoment FS530 275 347 137,5 460 1271 1271 328 20,5 200650 320 294,5 160 570 1231 1231 417 31,8 200
ØDR
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Getriebefreie Synchron Aufzugsmaschinen WSG-29Gearless synchronous traction machines WSG-29
Seite/page 12
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
Merkmale
• Für schnelle Aufzüge mit exzellentem Fahrkomfort (bei Aufhängung 2:1 bis 5 m/s)
• Compakt und äußerst leistungstark
• Hoher Wirkungsgrad, geringer Energieverbrauch, extrem geräuscharm
• Stabile Konstruktion für zulässige Achskräfte FS an der Treibscheibe bis zu 300.000 N
• Sicherheits bremse, baumustergeprüft nach EN 81-1, fürUCM Lösungen nutzbar (EN 81-1:1998 + A3:2009),optionale Handlüftung
• EG-Baumusterprüfbescheinigung (ABV 822)
• Wechselbare Treibscheibe aus Sphäroguss, formschlüssig mit dem Rotor verbunden
• Rillenprofil anlagenspezifisch
• Elektromotor optimal ausgelegt, Verwendung von Hochleis-tungs-Permanentmagneten, Isolierstoffklasse 155 (F),geräuscharme Fremdbelüftung, Temperaturüberwachung,Klemmenkasten
• Motor 2,9-fach überlastbar
• Mess-Systeme umrichterkompatibel, drehsteif angekuppeltoder integriert (z. B. ECN 413; ERN 487)
• Anpassfähige Optionen bei Spannung, Drehzahl, Drehmoment,Mess-System, Bremsmoment und Treibscheibenparameter
• Option: UL-CSA zugelassen
Lieferumfang
• Getriebefreie synchrone Aufzugsmaschine mit
Treibscheibe
Bremssystem
Mess-System (Encoder)
• Mechanische Rückholeinrichtung (Option)
• Anschlusskabel für Mess-System und Motor (Option)
• Abnahmerelevante technische Unterlagen und ausführlicheBetriebsanleitung
Die Angaben in diesem Prospekt dienen nicht der Projek tierung.Hierzu verwenden Sie bitte unseren Katalog.
Features
• For fast lifts with an excellent ride comfort (suspension 2:1 up to 5m/s)
• Compact and extreme powerful• High efficiency, reduced power consumption,
extreme low-noise level • Solid construction for permissible shaft loads FS at the
traction sheave up to 300,000 N• Fail-safe brake, type-tested to EN 81-1, can be used for
UCM solution (EN 81-1:1998 + A3:2009), manual release as an option
• EC type-examination certificate (ABV 822)• Interchangeable traction sheave in ductile cast iron,
positive locking with rotor• Groove profiles according to lift system• Perfectly rated motor, use of high- performance
permanent magnets, insulation class 155 (F), low noise ventilation, temperature control, terminal box
• Motor with 2.9 x overload capacity• Inverter compatible measuring devices, rigid coupling or
integrated (e. g. ECN 413; ERN 487)• Variable options regarding voltage, speed, torque, measu-
ring system, braking torque and traction sheave parameters• Option: UL-CSA approved
Content of supply
• Gearless synchronous lift machine withTraction sheaveBraking system Measuring system (encoder)
• Mechanical evacuation system (option)• Connecting cable for encoder and motor (option)• All technical documents necessary for approval and
detailed operation manual
The data contained in this brochure do not serve project planning purposes. For this, please refer to our catalogue.
ANTRIEBSSYSTEM FÜR ELEKTRISCHE AUFZÜGEDRIVE SYSTEM FOR ROPE LIFTS
Seite/page 13
Datum/date 28.02.2013
Stand/version 0.21
Änderungen vorbehalten! Subject to changes without notice!
Motor / motor
synchron / synchronous 22-polig / 22-poles
WSG-29.1 WSG-29.2 WSG-29.3
Drehmoment /torque S1(S3-40%)
MN [Nm] 2400 (3800) 3100 (4900) 4000 (6300)
Maximaldrehmoment / max. torque Mmax [Nm] 7000 9000 11500
Bremsmoment / braking torque MB [Nm] 2x / 3x 4600 2x / 3x 4600 3 x 4600
Treibscheibe /sheave ÆDT [mm] 650
für Nennlasten /for loads *) Q [kg] bis /upto 2750...3000 bis /upto 3200...4000 bis /upto 4000...5000
Aufhängung /suspension Tabelle gilt für / table applies for 2:1
Motorströme gelten für 500...620 VZwischen kreisspannung
Motor currents applicable to500...620 V d.c. link voltage
v nN PN (S1) IN (S1) nN PN (S1) IN (S1) nN PN (S1) IN (S1)[m/s] [rpm] [kW] [A] [rpm] [kW] [A] [rpm] [kW] [A]
1,0 59 14,8 48 59 19,2 59 59 24,7 74
2,0 118 29,7 89 118 38,3 107 118 49,4 130
3,0 176 44,2 120 176 57,1 153 176 73,7 208
4,0 235 59,1 179 235 76,3 213 235 98,4 270
5,0 294 73,9 212 294 95,4 265 294 123 345
zul. Achslast / perm. shaft load FS [kN] 280 300 300
Trägheitsmoment Motormotor inertia
JM [kgm2] 6,1 6,9 8,2
Trägheitsmoment Treibscheibetraction sheave inertia
JT [kgm2] 42,7 42,7 42,7
Masse / weight m [kg] 2610 2700 2825
*) Richtwerte. Die erzielbare Nennlast ist abhängig von den speziellen Anlagedaten. /Reference values. Achievable nominal load depends on specific lift system data.
Änderungen vorbehalten! Subject to changes without notice!
Notizen / notes:
Änderungen vorbehalten! Subject to changes without notice!
Notizen / notes:
WITTUR GROUP
www.wittur.com
beam
er2_
de21
28.
Febr
uar
2013