www.argox.com all rights reserved. copyright © 2008 argox information co., ltd iso 9001:2000 f1...
TRANSCRIPT
www.argox.comAll rights reserved. Copyright © 2008 Argox Information Co., Ltd
ISO 9001:2000
F1 Commercial & Light Industry Printer
www.argox.com
Product Strategy : Primary Features
4.17-inch(106mm) direct thermal/thermal transfer printer
203 dpi print resolution and up to 6-ips(152mm/s) printer speed
32 bit CPU and 4 MB Flash; 8 MB SDRAM memory standard
Multiple communication interface-parallel, serial, USB&PS/2
Up to 15,000 labels output per day, Baud rate is 115200 bps
Enhanced media sensor function-reflective and transmissive
Add head-open sensor and built-in buzzer warning system
Back-lit LCD display, LED and button operation interface for easy-to-use
Side-open cover and clear media window, built-in Tear off bar
www.argox.com
Product Strategy : Primary Features
No ribbon wrinkle with centralized thermal print head
360M ribbon & 8-inch media compartment
Inside/outside ribbon auto-switch and centralized ribbon & label path
Enhanced cutter and peeler module design for quick maintenance
Stand-alone operation through PS/2 interface
PPLB emulation and one binary file firmware more fast upgraded
Enhance Auto-form function
Add 1D/GS1 & 2D/QR barcode
Soft fonts are downloadable (Up to 72 points)
Full range of options : Cutter, Dispenser, RTC card, Stacker Font card, Argokee,
www.argox.com
Product Strategy : Technical Details
Category Concept Technical Details
New Design
User Friendly
Twin-Eyed Sensor System & Light Pipe Design
Unique Media Guide Lock & Floating Reflective Sensor Design
Ribbon Inside/Outside Auto-Switch Technology
Buzzer Warning System
LCD & LED Operating Display
Quick Maintain
TPH Pressure Adjustable Design
Roller Quick Installation
Cutter & Peeler Module Design
Improved Design
User Friendly
Flexible Media Holder & Shaft
Shaft Media Design For Stabilizing Paper Loading
Head Open Sensor
Bracket Metal Lock & Linking Lever
One-Button Calibration Function
Quick Maintain
Cutter Jam Detecting Sensor
Backfeed Function
Skip to Product Application
www.argox.com
Product Strategy : Technical Details
• New Design Twin-Eyed Sensor System & Light Pipe Design For Detecting Label Gap EffectivelyUnique Media Guide Lock & Floating Reflective Sensor Design Ribbon Inside/Outside Auto-Switch TechnologyBuzzer Warning System LCD & LED Operating DisplayTPH Pressure Adjustable DesignRoller Quick InstallationCutter & Peeler Module Design For Ease Of Use
www.argox.com
Twin-Eyed Sensor System
Front of printing module
Twin-eyed Sensor System : no.1 centralized & no.2 fixed in left side
Default is no. 1 centralized transmissive sensor
The LED light pipe for detecting label gap effectively
Back of printing module
www.argox.com
The benefits of Twin-Eyed Sensor System (Transmissive Sensor)
Twin-Eyed Sensor System
For 1-inch width label situation For hole label situation For notch label situation
1-inch width label such as Wristband in healthcare application
Select No.1 transmissive sensor to detect the hole on label
Select No.2 transmissive sensor to detect the notch on label
www.argox.com
Unique Media Guide Lock & Floating Reflective Sensor Design
Right & left side media guide, and unique holder lock design to stabilize the paper in printing situation
Push the black button and then adjust the media guide to fit the paper width
Floating reflective sensor design for closing to the backing paper reinforces precise gap detection
www.argox.com
According to ribbon supply and receive to Install ribbon on printer, and then print
Easier to use and no need to remember how to install inside/outside ribbon
Ribbon Inside/Outside Auto-Switch Technology
Ribbon receive
Ribbon supply
www.argox.com
Buzzer Warning System
All of fail situations happened, Buzzer will beep to be a warning and fail message also be shown on panel
Turn-off Buzzer : Select Authorised Setup1 / ALERT BUZZER function from panel to turn-off Buzzer
• Print label when head open• Head open alert phenomenon 3 beepsAlert - Red light flash LCD – head open
• Cutter jam problem
www.argox.com
LCD & LED Operating Display
• 2 × 16 line LCD •LED indicators × 2•Button × 6
Basic Setup Authorised Setup 1 Authorised Setup2
3 level selection for user friendly
www.argox.com
TPH Pressure Adjustable Design
New lock way design for easier and quick to replace TPH
TPH pressure adjustable and default is the lowest pressure
Front TPH horizontal position adjustable design
www.argox.com
Roller Quick Installation
18mm bigger size roller for better printing quality
Quick and easy to install and replace roller
www.argox.com
Cutter & Peeler Module Design
Module design for Ease of use
Peeler Module :
Cutter Module : (Baby-board built inside)
Link the connectorLock the screw × 2
Lock the right and left screw × 2Lock into hole on the printer
Link the connector
www.argox.com
Product Strategy : Technical Details
• Improved Design
Flexible Media Holder & Shaft
Media Shaft Design
Head Open Sensor
Bracket Metal Lock & Linking Lever
One-Button Calibration Function
Cutter Jam Detecting Sensor
Backfeed Function
www.argox.com
Product Strategy : Technical Details
• Improved Design– Flexible Media Holder & Shaft for loading 1-inch
and 3-inch core and adjust width
– Media Shaft Design for stabilizing paper loading
www.argox.com
• Improved Design– Cutter Jam Detecting Sensor for solving cutter
jam problem Jam detecting sensor
• When cutter jam, the fail message will be shown on panel, stop printing and Buzzer sounding
• Turn off Buzzer function : Authorised Setup 1 level / ALERT BUZZER
– Backfeed Function • Cutter or Peeler mode available to set up with or without backfeed function• Options on panel : Authorised Setup 2 level / ADVANCED CUT Authorised Setup 2 level / ADVANCED PEEL
Product Strategy : Technical details
www.argox.com
Product Strategy : Technical details
• Improved Design– Head Open Sensor
Sensor bar to control sensor
– Bracket Metal Lock & Linking Lever
Metal Lock before push the button Head open
– One-Button Calibration Function : only push feed button, no re-calibration required when change media size,