7/30/2019 WX95

1/16

P R O F E S S I O N A L P A R T N E R

Power 74 kW - 99 hpOperating weight (max.) 10 000 kgBucket capacity 0.1 - 0.3 m 3

WHEELED EXCAVATOR

WX95 - Series 2

7/30/2019 WX95

2/162

CLEAN PERFORMANCEA powerful four cylinder Tier III engine offers 5% higher productivity and around 1% fuel saving overthe previous Tier II model. Low noise output and reduced gaseous emissions make this an ideal machinefor confined urban site operation.Environmentally friendly. Highly productive.

TOTAL CONTROLHigh specification hydraulic system offers simultaneous use of multiplefunctions for smooth digging and lifting performance. Electronic enginespeed sensing control provides full use of the hydraulic pump output.The machines comes with an automatic priority device with swingpressure control for outstanding controllability.Smooth operation. Reduced fatigue.

CHASSIS VERSATILITYTwo or four wheel steering with crab steer facility to move the machine diagonally away from obstructions.Minimal turning circle of just 7.7 m. Customers can choose between rear blade, rear stabilisers, frontblade and rear stabilisers or four stabiliser legs. Stabilisers and blade work independently controlled bythe boom joystick. Maximum travel speed of 33 km/h or 20 km/h according to local regulations.

Agile performer. Operator control.

7/30/2019 WX95

3/163

DESIGNED FORPRODUCTIVITYThe compact Case WX upperstructure has a longitudinalmounted engine for a reduced tailswing radius. Theslew function uses the main load sensing hydraulicsystem with an integrated automatic priority systemand automatic static brake. Patented anti-drop valvesstandard on boom and dipper cylinders. A wide choiceof booms and dipper arms is available and the boomfoot has hydraulic articulation, allowing digging up to awall or obstruction.Robust design. Practical operation.

ERGONOMICENVIRONMENTHigh space cab offers the same internal volume as larger excavators.Excellent all round visibility with tinted glass to all windows, including modulartotal or partial opening windscreen. Fully adjustable suspension seat andsteering column ensure complete comfort for operators of all sizes. Majorityof operating controls are located on joysticks, with forward and reversemovement controlled by the accelerator pedal.Enhanced visibility. Ease of operation.

SERVICE ACCESSThree lift up canopy doors around the rear and sides of the machine allow easy access to regular service andmaintenance components. Tier III engine has 500 hour oil change intervals and all service points can be easilyreached from ground level for technician safety. Ecological engine drain tap and hoses standard and biodegradableoil can be specified as an option.Reduced downtime. Maximum productivity.

7/30/2019 WX95

4/164

The Tier III compliant WX95 Series 2 is designed to operate inconfined spaces. Its full articulated boom, combined with a short radius upper structure, makes it possible for the machine towork in narrow urban applications. The standard offset boomallows the WX95 Series 2 to work alongside a wall or otherobstruction. The boom itself is also articulated, enabling theoperator to carry loads close in to the machine. The boom isequipped with a standard auxiliary hydraulic circuit to poweradditional hydraulic services, such as quick couplers, 4-in-1buckets and hydraulic attachments.

Designed as a compact midi class machine, the WX95 Series 2has a very small rear overhang, with a tailswing radius of just 1485 mm. The longitudinal engine mounting ensures that servicepoints are easily reached, despite this compact design, withground level access to all regular maintenance areas. Themachine has hydraulic boom offset to allow working against wallsand other obstructions. With a choice of main boom and dipperarm lengths and specifications, the machine features patentedanti-drop valves on main boom and dipper arm cylinders.

UPPERCARRIAGE

A two gear range transmission offers a maximum travel speedbetween job sites of 33 km/h. Maximum drawbar pull in lowrange is 62 kN. The WX95 Series 2 can be specified with twowheel steering or four wheel steering, and a choice of single ordouble wheels. In four wheel steering the machine offers a crabsteering mode to allow diagonal movement away from a wall orobstruction, protecting the upperstructure and reducing the risk of impact on site.

UNDERCARRIAGE

ARTICULATED EQUIPMENT

7/30/2019 WX95

5/16

OPERATORS CABThe WX95 Series 2 uses the Case High Space cab, that offerssimilar internal volume to much larger excavators. The spaciousenvironment is further improved by the extensive use of tintedglass to offer excellent all round visibility and a large transparentcab roof to allow additional light into the cabin. A fully adjustablesuspension seat and tilting steering column ensure thatoperators of all sizes will be able to find a comfortable positionin this exceptionally quiet cab. Simple to operate joystick controlsand pedals ensure low effort and reduced fatigue for theoperator over a full working day.

7/30/2019 WX95

6/166

Electronically-controlled turbo charged diesel engine meetsTier III emissions regulations. In tests the 99 hp (74 kW)engine offers increased productivity and lower fuelconsumption. Engine and hydraulic pump monitoring andcontrol system offers multifunction use with high output,increasing productivity and tonne/litre output for the customer.

Case has been a manufacturer of class-leading excavators formany years and the WX95 Series 2 builds on that success. Thehydraulic system has on-board computer and engine speedsensor control to maximise hydraulic flow and pressure to meet

the operators needs. A swing pressure control offers the driveroutstanding controllability, while the flow pump saving circuit minimises oil return to ensure smooth flowing movement of theboom and dipper arm.

HYDRAULICS

Three large gullwing doors at the rear and side of theupperstructure afford excellent access to the engine and hydrauliccomponents. All regular service work can be carried out fromground level and the Tier III engine has 500 hour oil changeintervals to minimise downtime. The electronic management system incorporates self-diagnostic software that can beaccessed via the large monitor in the cab. Standard ecologicaldrain plugs and hoses are included and customers can opt forfully biodegradable oil if working in sensitive areas.

ENGINE

SERVICE AND MAINTENANCE

7/30/2019 WX95

7/167

7/30/2019 WX95

8/168

7/30/2019 WX95

9/169

7/30/2019 WX95

10/1610

6970 3025 9550 6940 3025 9400 6940 3025 9950 6940 3025 98007340 3025 9600 7310 3025 9450 7310 3025 10000 7310 3025 9850

lmmkg

SAE capacityWidthWeight

96 135 193 237 280350 450 600 700 80095 110 130 140 145

SPECIFICATIONS

ENGINELatest generation engine, meeting European requirementsfor "Low exhaust emissions" Tier III in accordance with directive97/68/CEMake _________________________________CASE FAMILY IIIType _____________________F4GE9484P*J/ 445TA/MNB4 cyl. 2 Val TAA rotary injection pumpNumber of cylinders_________________________________4Bore - Stroke ___________________________104 x 132 mmDisplacement ___________________________________4.5 lHorsepower EEC80/1269 ____________74 kW @ 2100 rpmMaximum Torque __________________415 Nm @ 1250 rpm

HYDRAULIC SYSTEMTotal max. flow _____________________________151 l/minAttachment max pressure______________________350 barTravel max pressure___________________________350 barSwing max pressure ___________________________190 bar

SWINGMax upperstructure swing speed ________________8.0 rpm

Swing torque _______________________________23.0 kNmTail swing radius_____________________________1485 mm

TRAVELMax travel speed (field range) __________________11 km/hMax travel speed (road range)__________________33 km/hMax drawbar pull (field range)_____________________62 kN

ELECTRICAL SYSTEM Voltage ________________________________________24 V Batteries ___________________________2 x 12 V - 100 A/hStarter motor __________________________________4 kWAlternator______________________________________70 A

UNDERCARRIAGE

2 wheel steering turning circle diameter ___________12.6 m4 wheel steering turning circle diameter ____________7.7 m

CIRCUIT AND COMPONENT CAPACITIESFuel tank_______________________________________128 lHydraulic tank ___________________________________94 lEngine oil ________________________________________13 lCooling circuit ___________________________________22 lSwing gear _______________________________________3 l

BRAKESService brakes ________________________oil bath disc typeWork brake __________________acts on service brakes andlocks front axle oscillation

Parking brake _____________ spring type mechanical actingon rear axleEmergency brake _____double braking circuit and automaticparking brake actuation with the engine shut down

TYRES4 wheels ________________________________500/45 - 208 wheels with twinning rings ___________________8.25 - 20

BUCKETS *

Dipper 1.85 mDipper 2.20 m

SHIPPING DIMENSIONSAND WEIGHT

PL P2A P2AL P4A

Rear Blade Rear Stabilisers Front Blade + Rear Stab. 4 Stabilisersmax max max max max max max max

length height length height length height length heightmm mm kg mm mm kg mm mm kg mm mm kg

GENERAL PURPOSEl

mmkg

SAE capacityWidthWeight

* For other bucket sizes, please contact your CASE dealer

7/30/2019 WX95

11/1611

9502200 22001100 950

4250

920 2200 950

4070

1070

4220

3025

290

1690

2200

2640

3790

6970

2200 980

5351115

1485

*

3025

290

1690

2200

2315

4160 2200

7310

950

4101115

1485

**

75707459

1067

1010

2200

2695

60

60

30

**

GENERAL DIMENSIONS

Machine equipped with twin tyres 8.25-20 14PR

Dimensions are indicated in mm* Machine equipped with dipper 1850 mm long** Machine equipped with dipper 2200 mm long

7/30/2019 WX95

12/1612

C

D

F

E

B '

B

A'

A

2440

0

1000

2000

3000

4000

5000

6000

7000

1000

2000

3000

4000

5000

6000

0 9 0 0 0

8 0 0 0

7 0 0 0

6 0 0 0

5 0 0 0

4 0 0 0

2 0 0 0

1 0 0

0

9000

8000

3 0 0 0

PERFORMANCE DATA

mmmmmmmmmmmmmmmmdaNdaN

Maximum digging reachMaximum digging reach at ground levelMaximum digging depthDigging depth - 2440 mm level bottomMax digging height Max loading height Minimum front swing radiusMax digging depth of vertical wallBucket breakout force (350 bar)Stick breakout force (350 bar)

DIPPERSTICK 1850 mm 2200 mm

A ABBCDEF

7941 82827743 80953951 42983793 41518066 83976147 64902959 31892138 24034600 46004530 4010

7/30/2019 WX95

13/1613

7/30/2019 WX95

14/1614

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-3.0 m

- Lif t capacities are taken in accordance with SAE J 1097/ISO 10567/DIN 15019-2.- Lift capacities shown in tons do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity.- Capacities that are marked with an asterisk are hydraulic limited.- If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real li fting capacity.- The machine must be parked on firm, level ground, with stabilisers and/or blade on the ground.

LIFTING CAPACITYBASE BOOM: 1.75 m - TOP BOOM: 2.00 m - BUCKET (CECE): 0.193 m 3 (130 Kg)

3.5 m 4.5 m 6.0 m At max reachREACH

Front

360

Values are expressed in tonnes

m

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

PL up - DIPPERSTICK 1.85 m2.9* 2.3 2.0 1.5 0 0 1.7 1.3 5.02.9* 2.3 2.0 1.5 1.2 0.9 1.1 0.8 6.32.8 2.1 1.9 1.4 1.2 0.9 1.0 0.7 6.9

0 0 1.8 1.3 1.2 0.9 0.9 0.7 7.12.4 1.7 1.7 1.2 1.1 0.8 0.9 0.7 6.92.4 1.8 1.7 1.2 1.1 0.8 1.0* 0.8 6.2

0 0 1.2 1.2 0 0 1.2 1.2 4.7

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

PL down - DIPPERSTICK 1.85 m2.9* 2.7 2.5* 1.8 0 0 1.8* 1.5 5.02.9* 2.7 2.4* 1.8 2.0* 1.1 1.5* 1.0 6.34.0* 2.5 2.8* 1.7 2.1* 1.1 1.5* 0.8 6.9

0 0 3.2* 1.5 2.1* 1.0 1.6* 0.8 7.14.0* 2.1 3.0* 1.5 1.9* 1.0 1.4* 0.8 6.92.6* 2.1 2.1* 1.5 1.2* 1.0 1.0* 1.0 6.2

0 0 1.2 1.2 0 0 1.2 1.2 4.7

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

P2A down - DIPPERSTICK 1.85 m2.9* 2.3 2.5* 1.5 0 0 1.8* 1.2 5.02.9* 2.3 2.4* 1.5 2.0* 0.9 1.5* 0.8 6.34.0* 2.1 2.8* 1.4 2.1* 0.9 1.5* 0.7 6.9

0 0 3.2* 1.3 2.1* 0.8 1.6* 0.7 7.14.0* 1.7 3.0* 1.2 1.9* 0.8 1.4* 0.7 6.92.6* 1.8 2.1* 1.2 1.2* 0.8 1.0* 0.8 6.2

0 0 1.2 1.2 0 0 1.2 1.2 4.7

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

P2AL down - DIPPERSTICK 1.85 m2.9* 2.9 2.5* 1.9 0 0 1.8* 1.6 5.02.9* 2.9 2.4* 1.9 2.0* 1.2 1.5* 1.1 6.34.0* 2.6 2.8* 1.8 2.1* 1.2 1.5* 0.9 6.9

0 0 3.2* 1.7 2.1* 1.1 1.6* 0.9 7.14.0* 2.3 3.0* 1.6 1.9* 1.1 1.4* 0.9 6.92.6* 2.3 2.1* 1.6 1.2* 1.1 1.0* 1.0 6.2

0 0 1.2 1.2 0 0 1.2 1.2 4.7

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

P4A down - DIPPERSTICK 1.85 m2.9* 2.4 2.5* 1.6 0 0 1.8* 1.3 5.02.9* 2.4 2.4* 1.6 2.0* 1.0 1.5* 0.9 6.34.0* 2.2 2.8* 1.5 2.1* 1.0 1.5* 0.8 6.9

0 0 3.2* 1.4 2.1* 0.9 1.6* 0.7 7.14.0* 1.9 3.0* 1.3 1.9* 0.9 1.4* 0.7 6.92.6* 1.9 2.1* 1.3 1.2* 0.9 1.0* 0.9 6.2

0 0 1.2 1.2 0 0 1.2 1.2 4.7

7/30/2019 WX95

15/1615

LIFTING CAPACITYBASE BOOM: 1.75 m - TOP BOOM: 2.00 m - BUCKET (CECE): 0.193 m 3 (130 Kg)

4.5 m 6.0 m 7.5 m At max reachREACH

Front

360

Values are expressed in tonnes

m

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

PL up - DIPPERSTICK 2.20m0 0 2.0 1.5 0 0 1.4 1.1 5.50 0 2.0 1.5 1.3 0.9 1.0 0.8 6.7

2.8 2.1 1.9 1.4 1.2 0.9 0.9 0.6 7.30 0 1.8 1.3 1.2 0.9 0.8 0.6 7.5

2.4 1.7 1.7 1.2 1.1 0.8 0.9 0.6 7.22.4 1.7 1.7 1.2 1.1 0.8 1.0 0.7 6.6

0 0 1.2 1.2 0 0 1.2 1.2 4.9

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

PL down - DIPPERSTICK 2.20m0 0 2.2* 1.8 0 0 1.5* 1.3 5.50 0 2.2* 1.8 1.9 1.1 1.3* 0.9 6.7

3.6* 2.5 2.7* 1.7 2.0* 1.1 1.2* 0.8 7.30 0 3.2* 1.6 2.1* 1.0 1.3* 0.7 7.5

4.4* 2.1 3.1* 1.5 2.0* 1.0 1.3* 0.8 7.23.1* 2.1 2.4* 1.5 1.5* 1.0 1.0* 0.9 6.6

0 0 1.2 1.2 0 0 1.2 1.2 4.9

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

P2A down - DIPPERSTICK 2.20m0 0 2.2* 1.5 0 0 1.5* 1.1 5.50 0 2.2* 1.5 1.9 0.9 1.3* 0.8 6.7

3.6* 2.1 2.7* 1.4 2.0* 0.9 1.2* 0.6 7.30 0 3.2* 1.3 2.1* 0.8 1.3* 0.6 7.5

4.4* 1.7 3.1* 1.2 2.0* 0.8 1.3* 0.6 7.23.1* 1.7 2.4* 1.2 1.5* 0.8 1.0* 0.7 6.6

0 0 1.2 1.2 0 0 1.2 1.2 4.9

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

P2AL down - DIPPERSTICK 2.20m0 0 2.2* 1.9 0 0 1.5* 1.4 5.50 0 2.2* 1.9 1.9 1.2 1.3* 1.0 6.7

3.6* 2.7 2.7* 1.8 2.0* 1.2 1.2* 0.8 7.30 0 3.2* 1.7 2.1* 1.1 1.3* 0.8 7.5

4.4* 2.3 3.1* 1.6 2.0* 1.1 1.3* 0.8 7.23.1* 2.3 2.4* 1.6 1.5* 1.1 1.0* 1.0 6.6

0 0 1.2 1.2 0 0 1.2 1.2 4.9

6.0 m4.5 m3.0 m1.5 m

0 m-1.5 m-2.5 m

P4A down - DIPPERSTICK 2.20m0 0 2.2* 1.6 0 0 1.5* 1.1 5.50 0 2.2* 1.6 1.9 1.0 1.3* 0.8 6.7

3.6 2.3 2.7* 1.5 2.0* 1.0 1.2* 0.7 7.30 0 3.2* 1.4 2.1* 0.9 1.3* 0.7 7.5

4.4* 1.8 3.1* 1.3 2.0* 0.9 1.3* 0.7 7.23.1* 1.9 2.4* 1.3 1.5* 0.9 1.0* 0.8 6.6

0 0 1.2 1.2 0 0 1.2 1.2 4.9

- Lif t capacities are taken in accordance with SAE J 1097/ISO 10567/DIN 15019-2.- Lift capacities shown in tons do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity.- Capacities that are marked with an asterisk are hydraulic limited.- If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the tables to calculate the real li fting capacity.- The machine must be parked on firm, level ground, with stabilisers and/or blade on the ground.

4.5 m 6.0 m 7.5 m At max reach

7/30/2019 WX95

16/16

www.casece.com

Worldwide Case ConstructionEquipment Contact InformationEUROPE/AFRICA/MIDDLE EAST :Centre Daffaires EGB5, Avenue Georges Bataille - BP 4040160671 Le Plessis-Belleville - FRANCENORTH AMERICA/MEXICO :700 State Street Racine, WI 53404 U.S.A.LATIN AMERICA :Av. General David Sarnoff 223732210 - 900 Contagem - MGBelo Horizonte BRAZIL

ASIA PACIFIC :Unit 1 - 1 Foundation Place - Prospect New South Wales - 2148 AUSTRALIACHINA :No. 29, Industrial Premises, No. 376.De Bao Road, Waigaoqiao Ftz, Pudong,SHANGHAI, 200131, P.R.C.

STANDARD EQUIPMENT& OPTIONSSTANDARD EQUIPMENT

2 wheel steeringRobust, shielded arc-welded, modular chassis in box section designLarge toolbox under the right stepLatest generation CASE Family III Tier 3 diesel engines,comply with current European emissions standards

Direct injection with turbo chargerWater-cooled, low-consumption and low-exhaust compliant to EU directiveAutomatic battery main switch (coupled to ignition key)Pump Management SystemHydraulic servo controlSingle pump hydraulic load sensing system with two service pumpsEngine and pump monitoring by power limit control6 selectable gears; maximum travel speed 33 Km/hEncased ball bearing slew ring with long-life lubricationSwing drive with low-wearing disc brakeNoise-insulated and flexibly mounted cabin in soft designTinted safety glazing all around, full up and over windscreenSun blinds, transparent roof and rain protectionLCD with integrated error diagnosis functionSteering column incline infinitely variable

Ergonomic design of arm rests and foot pedalsDriver suspension seat individually adjustable for height and inclineConsoles adjustable for height and lengthForward/Reverse shifting on acceleratorIndependent control of blade and each stabiliserAutomatic axle locking system

Travel and swing hydrostatic brakingCentralised control of blade and stabilisers on right joystick Safety load hook on bucket linkagePatented safety valves for hoist modeHydraulic system provision for hammer and shears

OPTIONS

4 wheel steering20 km/h forward speedSingle or twin tyresDozer blade with hydraulic parallel guidanceStabilisers with large, lockable padsTransport holder for transport holder for clamshell grabRadio with 12 V electrical auxiliary supply in cabFront guardFOPS protection for cabAir conditioningElectric diesel filling systemCold starting kit Biodegradable oilRotating beaconPiping for hammer and shears

F o r m

N o .

2 6 0 6 1 0 5 9 G B - P r i n t e d

i n I t a l y - L

E A D E R F i r e n z e - 0

4 / 0 8

Standard and optional equipment shown can vary by country.

WX95Series 2

NOTE: Standard and optional fittings can varyaccording to the demands and specificregulations of each country. The illustrationsmay include optional rather than standard fittings- consult your Case dealer. Furthermore, CNHreserves the right to modify machinespecifications without incurring any obligationrelating to such changes.

CASE Construction EquipmentCNH UK LtdUnit 4,Hayfield Lane Business Park,Field Lane, Auckley,Doncaster,DN9 3FLTel. 00800-2273-7373Fax +44 1302 802829

Conforms to directive 98/37/CE

The call is free from a land line. Check in advancewith your Mobile Operator if you will be charged.