Setting new standards in exhaust / intake duct termination for dryers, bathrooms, kitchen hood exhausts and fresh air make up. X Vent Box utilizes our patented design which eliminates the concerns of water intrusion, mold & mildew and helps reduce energy loss.

Engineered and tested to hold up to the harshest environments. Constructed from high temperature UV stabilized plastic polymers designed to handle high heat and be impact resistant.

The X Vent Box was made to provide years of reliable and maintainable service with an easily removable front louver and gravity dampers.

DRYER EXHAUST

BATHROOM EXHAUST

KITCHEN HOOD EXHAUST

FRESH AIR MAKE - UP

APPLICATIONS

www.xventbox.com

GRAVITY DAMPERS

Our gravity dampers are balanced -3 degrees past center to ensure a snug fit. Can be easily removed for inspection or maintenance. Designed not to flutter in heavy winds.

REMOVABLE FRONT LOUVER The louver can be removed without damaging any weather tight seals. Impact resistance, UV protected and Flame resistance (UL-94  VO Flame Spread rating) Louver blades are spaced to prevent any “critter” from taking up residence but allows for proper ventilation.

100% NON CORROSIVE

Constructed from high temperature plastic polymers. Material approved for use on high temperature appliance devices or components. Sustainable Operational temperature at 227º (max temp. 259º) UL-94 VO flame spread rating

MONOLITHIC BOX CAVITY

Our cavity box is constructed in one piece eliminating any seams which prevents any possibility for water intrusion.Outstanding structural strength for durability. Single step installation

KEEP THE OUTSIDE & INSIDE AIR SEPARATE

Differences in air moisture content and / or temperatures between interior and exterior can create conditions in which mold thrives and the deterioration of construction materials accelerates.

PREVENT WATER INTRUSION PAST THE BUILDING ENVELOPE.

Water entering is never good, and expensive to rectify. Prevention is less expensive, requires less man hours, and NO attorneys fees. Water can cause mold growth and damage the wall materials through multiple floors. Our products successfully prevent water breaching the exterior building envelope, even in extreme conditions like hurricanes.

STOP CRITTERS FROM TAKING UP RESIDENCE

Squirrels, birds, bees are all nice–outside. Dryer ducts filled with nests can cause fires. Having ducts obstructed increases energy expense relating to running the attached appliances. Dealing with animal feces, and noise associated with nest-building, are not pleasant either. Our design makes it impossible for a bird or squirrel to access the duct, and insect access unlikely.

PREVENTS SAND, DEBRIS INTRUSION

Sand and debris entering, and collecting in, ductwork can damage attached appliances (i.e. dryers, kitchen hoods, bath – room exhaust fans) as well as reduced efficiencies. Our design keeps out debris carried by winds.

FUNCTION ENVIRONMENTAL | CRITTER/PEST PREVENTION

www.xventbox.com

SINGLE OUTLET

SLIM SINGLE OUTLET IN-LINE SLEEVE

CUSTOMIZATION AVAILABLE ON ALL MODELS

4 IN. DIAMETER

6 IN. DIAMETER

DOUBLE OUTLET

SLIM-S

SEB-S

DVEB-S

SLIM-F

SEB-F

DHEB-S

SLIM-BR

SEB-BR

DVEB-F DHEB-F

DVEB-BR DHEB-BR

MODEL | SERIES TESTING AND CERTIFICATES

PRESSURE TEST | CONDUCTED BY: CONSTRUCTION RESEARCH LABORATORY INC.

Double Exhaust Vent Box (horizontal): positive pressure +380psf maximum load negative presure -400psf maximum load Double Exhaust Vent Box (vertical): positive pressure +390psf maximum load negative presure -400psf maximum load Single Exhaust Vent Box (4 or 6 inch): positive pressure +375psf maximum load negative presure -450psf maximum load Slim Exhaust Vent Box : positive pressure +400psf maximum load negative presure -440psf maximum load Inline Sleeve (4 or 6 inch) : positive pressure +415psf maximum load negative presure -390psf maximum load

COMPRESSIVE STRENGHT TEST | CONDUCTED BY: ALL STATE ENGINEERING & TESTING CONSULTATNTS INC.

Double Exhaust Vent Box (horizontal): applied load +4845lbs / test strenght 70 PSI

Double Exhaust Vent Box (vertical): applied load +3420lbs / test strenght 76 PSI

Single Exhaust Vent Box (4 or 6 inch): applied load +3344lbs / test strenght 73 PSI

Slim Exhaust Vent Box: applied load +4640lbs / test strenght 72 PSI

THE VALUES REPRESENTED IN THE ABOVE GRAPH ARE WIND LOAD PRESSURE ONLY NOT IMPACT TESTEDSt

atic

Pre

ssur

e (P

SF. p

er s

q. f

t.)

Wind Speed (miles per hour)

505

460

424

400

390

350

301

272

225

200

156

90

80

72

64

100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400

CA

TE

GO

RY

1

CA

TE

GO

RY

2

CA

TE

GO

RY

3

CA

TE

GO

RY

4

CA

TE

GO

RY

5

XV

EN

T P

RO

DU

CT

RA

NG

E

TF

3 15

8-20

5 M

PH

F4

20

7-26

0 M

PH

F5

261-

318

MP

H

INLINE SLEEVES

SLIM BOX

DOUBLE BOX VERT.

DOUBLE BOX HOR.

SINGLE BOX

HURRICANE TORNADO

ALL PRODUCTS HAVE BEEN TESTED FOR UL 94V-O FLAME SPREAD.Maximum sustainable operational temperature of 235°.

UL Standard 94 identifies test methods for flammability of plastic materials for parts in devices and appliances.

Afterflame time for each specimen <10s

Total afterflame time for any condition set <50s

Afterflame plus afterglow time for each individual specimen after the second flame application <30s

Afterflame plus afterglow of any specimen up to the holding clamp None

Cotton Indicator ignited by flame particles or drops None

www.xventbox.com

INSTALATION OPTIONS

Over 300,000 units installed Since 2006 with a 99%

Customer Satisfaction Rating

We can match nearly any color offered in the Sherwin Williams® and Benjamin Moore® color palette.

WE FIT 95% OF ANY EXTERIOR WALL ASSEMBLY

STUCCO BRICK METAL SIDING PANEL

STONE EFIS GLASS/CURTAIN WALL

CUSTOM COLORS AVAILABLE

www.xventbox.com

PRODUCT LIST

DOUBLE EXHAUST BOX (HORIZONTAL OR VERTICAL)

IN-LINE SLEEVEMODEL ID MODEL DESCRIPTION WT. LBS.

4-ILS-8F 4” In-line sleeve w/ 8” front louver face. Color: White 1.764-ILS-12H 4” In-line sleeve w 8”x12” front horizontal louver face Color: White 1.974-ILS-12V 4” In-line sleeve w 8”x12” front vertical louver face Color: Whitea 1.976-ILS-8F 6” In-line sleeve w/ 8” front louver face. Color: White 1.916-ILS-12H 4” In-line sleeve w 8”x12” front horizontal louver face Color: White 2.106-ILS-12V 4” In-line sleeve w 8”x12” front vertical louver face Color: White 2.104/4-ILS-12H 4” and 4” In-Line Exhaust Sleeve w/12” x 8” Horizontal Louver and Frame - Combo Pack Color: White 3.254/4-ILS-12V 4” and 4” In-Line Exhaust Sleeve w/12” x 8” Vertical Louver and Frame - Combo Pack Color: White 3.254/6-ILS-12H 4” and 6” In-Line Exhaust Sleeve w/12” x 8” Horizontal Louver and Frame - Combo Pack Color: White 3.684/6-ILS-12V 4” and 6” In-Line Exhaust Sleeve w/12” x 8” Vertical Louver and Frame - Combo Pack Color: White 3.68*CUSTCOL Custom Color Match Set Up Fee - Benjamin Moore / Sherwin Williams Code Req’d. Cost per color per model

SINGLE EXHAUST BOXMODEL ID MODEL DESCRIPTION WT. LBS.

4SEB-S 4” Single Exhaust Box - Stucco/Siding Exterior. Color: White 3.004SEB-F 4” Single Exhaust Box - Flush Precast Exterior. Color: White 3.154SEB-BR 4” Single Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White 3.466SEB-S 6” Single Exhaust Box - Stucco/Siding Exterior. Color: White 3.106SEB-F 6” Single Exhaust Box - Flush Precast Exterior. Color: White 3.206SEB-BR 6” Single Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White 3.40*CUSTCOL Custom Color Match Set Up Fee - Benjamin Moore / Sherwin Williams Code Req’d. Cost per color per model

SLIM EXHAUST BOXMODEL ID MODEL DESCRIPTION WT. LBS.

SLIM-S Single Exhaust Box - Low Profile - Stucco/Siding Exterior. Color: White 2.60SLIM-F Single Exhaust Box - Low Profile - Flush Precast Exterior. Color: White 2.30SLIM-BR Single Exhaust Box - Low Profile - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White 3.00*CUSTCOL Custom Color Match Set Up Fee - Benjamin Moore / Sherwin Williams Code Req’d. Cost per color per model

MODEL ID MODEL DESCRIPTION WT. LBS.

DHEB-DL-S Double Horizontal Exhaust Box - Stucco/Siding Exterior. Color: White. Orientation: Dryer Left (4” opening) facing front 3.75DHEB-DL-F Double Horizontal Exhaust Box - Flush Precast Exterior. Color: White. Orientation: Dryer Left (4” opening) facing front 3.85DHEB-DL-BR Double Horizontal Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White. Orientation: Dryer Left (4” opening) facing front 4.06DHEB-4-4-S Double Horizontal Exhaust Box - Stucco/Siding Exterior. Color: White. Orientation: Dual 4” openings 3.75DHEB-4-4-F Double Horizontal Exhaust Box - Flush Precast Exterior. Color: White. Orientation: Dual 4” openings 3.85DHEB-4-4-BR Double Horizontal Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White. Orientation: Dual 4” openings 4.06DHEB-DR-S Double Horizontal Exhaust Box - Stucco/Siding Exterior. Color: White. Orientation: Dryer Right (4” opening) facing front 3.75DHEB-DR-F Double Horizontal Exhaust Box - Flush Precast Exterior. Color: White. Orientation: Dryer Right (4” opening) facing front 3.85DHEB-DR-BR Double Horizontal Exhaust Box - Brick/EFIS Exterior.Offset Range .5” to 6”. Color: White. Orientation: Dryer Right (4” opening) facing front 4.06DVEB-4/6-S Double Vertical Exhaust Box - Stucco/Siding Exterior. Color: White Orientation: 4” over 6” 3.75DVEB-4/6-F Double Vertical Exhaust Box - Flush Precast Exterior. Color: White Orientation: 4” over 6” 3.85DVEB-4/6-BR Double Vertical Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White Orientation: 4” over 6” 4.06DVEB-6/4-S Double Vertical Exhaust Box - Stucco/Siding Exterior. Color: White Orientation: 6” over 4” 3.75DVEB-6/4-F Double Vertical Exhaust Box - Flush Precast Exterior. Color: White Orientation: 6” over 4” 3.85DVEB-6/4-BR Double Vertical Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White Orientation: 6” over 4” 4.06DVEB-4/4-S Double Vertical Exhaust Box - Stucco/Siding Exterior. Color: White Orientation: 4” over 4” 3.85DVEB-4/4-F Double Vertical Exhaust Box - Flush Precast Exterior. Color: White Orientation: 4” over 4” 4.00DVEB-4/4-BR Double Vertical Exhaust Box - Brick/EFIS Exterior. Offset Range .5” to 6”. Color: White Orientation: 4” over 4” 4.11*CUSTCOL Custom Color Match Set Up Fee - Benjamin Moore / Sherwin Williams Code Req’d. Cost per color per model

www.xventbox.com

www.xventbox.com

FSH Industries, LLC  |  X Vent Box9737 NW 41st St. Suite# 672 Doral, FL  33178t 866-XVENTBX | f 866-931-0272 (983-6829)