x600 drill rig · 2012-08-21 · - sullair compressor 1350cfm/350psi or 1150cfm/500psi . control...
TRANSCRIPT
X600 Drill Rig
Mast
- AustEx heavy duty double lattice mast
structure. - Heavy-duty dump plate with twin hydraulic
cylinders providing 2.4 metre dump stroke. - Twin hydraulic mast raise cylinders. - Dual feed cylinders 5.5” bore x 2.75” rod
x 4m stroke actuating 2:1 ratio travelling sheave system providing 8 metres of rotation head stroke.
- Rapid head traverse speed (Retract 938mm per/sec)
- Variable pull-back and pull-down micro fine feed control system.
- 38,500 kg pull-back capacity with dual heavy duty Super 180 chains.
- 16,000 kg pull down with dual heavy duty super 160 chains.
- 600m survey with static brake and counter balance valve.
- SWL 250 kg RC boom with hydraulic winch and static brake.
- Hydraulic boom slew and lift.
Rotation Head
- Heavy duty Air Drill RC head - Dual rotation motors providing 14,000Nm of
rotation toque. - 0 to 120rpm speed range. - AustEx heavy duty head plate with adjustable
nylon head slides.
Cooler
- - V pack cooler rated to 55 degrees ambient - - F12-110 fan motor for low cooler pressure - - Fuel cooler - -
- Base - Design to suit crawler track
frame or truck fitment. - Hydraulic stabilising jack legs
fitted with counter balance valves.
- Heavy duty A-frame and mast raise cylinder anchor points.
- Australian standard safety access ladders and handrails fitted.
- Hydraulic walkways.
Power Unit
- Detroit Diesel MTU 12V-2000 series 850bhp @ 1800rpm - CAT C27 12V series 950bhp @ 1800 rpm - Cummins QSK 23 950bhp @ 1800 rpm
Compressor Unit
- Sullair Compressor 1350cfm/350psi or 1150cfm/500psi
Control Cabinet
- Pressed steel drillers control consol with hinged opening doors on both sides. - 2 spool Rexroth directional control valve bank:
Section 1 - Rotation Section 2 – Fast Feed
- 7 spool directional control valve bank # 1: Section 1 – Left Hand Rear Jack Leg Section 2 - Right Hand Rear Jack Leg Section 3 - Left Hand Front Jack Leg Section 4 - Right Hand Front Jack Leg Section 5 – Mast Raise Section 6 – Mast Dump Section 7 - Spare
- 9 spool directional control valve bank # 2: Section 1 – Fine Feed Section 2 – Blow down Section 3 – Slips table Section 4 – Spare Section 5 – Cabinet Raise lower Section 6 – Cabinet swing Section 7 – Cabinet slew Section 8 - Spare Section 9 – Air valve
- 9 spool directional control valve bank # 3: Section 1 – Break out in/out Section 2 – Break out operate Section 3 – Breakout cylinder Section 4 – Rod handler slew Section 5 – Survey winch Section 6 – RC winch Section 7 – RC boom slew Section 8 – RC boom lift Section 9 – Duster fan
- Infinitely variable fine feed flow control valve. - Infinitely variable pull down pressure control. - Infinitely variable hold back pressure control.. - Gauges: - All items on control console fascia labeled.
Miscellaneous
- Double element filtration for engine. - 950 litre capacity hydraulic oil tank with level sight glass and dual return & case drain filtration. - Hydraulic pressure filtration. - CAT piston water pump. - 24 volt electrical system including heavy-duty battery box and emergency stop buttons. - Safety guarding to moving components. - Fold up driller’s platform. - All fabricated components sand-blasted prior to painting. All components primed and top coated
with high quality 2-pack urethane paint in the customers colour of choice.
Operational Options
- Rod handler and rod bin can be fitted. - On board booster - On board sampling system - On board duster unit with fan - Bit holders and tool boxes - Truck to tray fitment - Fire suppression system