xoominaire 9999 - led linear · variopendant 9999 2 m (6.56') long pendant set with fastening...
TRANSCRIPT
XOOMINAIRE™ 9999
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
46
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
47
Zhu Difeng/Shutterstock.com
Paul Prescott/Shutterstock.com
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
Cust
om S
olut
ions
Tech
nica
l & S
ervi
ce A
ppen
dix
4949
99 mm / 3.9"
Technical information
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP40Protection class:
XX Prism optic, UGR < 19
• Wide and slightly deep light distribution for shadowless and generous illumination of areas
• Absolutely shadowless through precision-crafted multi prismatic PMMA-optic
• 84 % Optical efficiency
LED luminaire in IP40 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Efficient prismatic optics with minimal glare (UGR < 19). Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 16.0 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code ofWxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premiumcolor rendition with a CRI of > 85 ensuring a remarkable light quality. Protected againstelectrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dimmablewith constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Height 3.5 m / 11.5'
Width 2.5 m / 8.2'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – PR
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– P
R
50
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 PR P R 15.0 /4.6
1,800 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,400 /1,000
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
4,100 /1,200
Super- Output
S O
I 9 9 9 9 P R S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– P
R
51
Technical information
XX Batwing louver reflector
• 3-in-1 illumination of two vertical surfaces (wall / shelf) and also the corridor at the same time with a homogeneous distribution of brightnesswithout a visible lamp
• Precise aluminum louver reflector opticBatwing
• 85 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Batwing louver reflector ideal for library , supermarket or stock-room aisle. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technol-ogy. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dim-mable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Height 3.5 m / 11.5'
Width 3 m / 9.84'
1 – 1.5 m
3.28' – 4.92'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – BW
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– B
W
52
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 BW B W 15.0 /4.6
1,821 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,440 /1,000
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
4,149 /1,200
Super- Output
S O
I 9 9 9 9 B W S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– B
W
53
25°
Technical information
XX 25° Reflector optic (UGR < 16)
• Precise, deep light distribution for accurate illumination of areas from a light point height of 4 m / 13.1'
• UGR < 16 through precision-crafted aluminum pot reflector optic 25°
• 84 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3,9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. 25° reflector with glare control (UGR < 16) ideal for task lighting in production hall. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dimmable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m / 500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Height 15 m / 49.2'
Width 4 m / 13.1'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – 25°
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– 2
5°
54
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 25 2 5 15.0 /4.6
1,800 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,400 /1,000
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
4,100 /1,200
Super- Output
S O
I 9 9 9 9 2 5 S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– 2
5°
55
65°
Technical information
XX 65° Louver reflector optic (UGR < 16)
• Wide and deep light distribution for preciseand generous illumination of areas up to a light point height of 4 m / 13.1'
• UGR < 16 through precision-crafted aluminumlouver reflector optic 65°
• 84 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. 65° reflector with glare control (UGR < 16) ideal for task lighting in production hall. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dimmable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Height 4 m / 13.1'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – 65°
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– 6
5°
56
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 65 6 5 15.0 /4.6
1,800 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,400 /1,000
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
4,100 /1,200
Super- Output
S O
I 9 9 9 9 6 5 S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– 6
5°
57
Technical information
XX 2 x 23° Symmetric narrow reflector
• Very narrow, sym. light distribution for il-luminating two vertical surfaces (wall / shelf) with a homogeneous distribution of brightnesswithout a visible lamp
• Precise aluminum reflector optic wall washer with 2 x 23° symmetric
• 79 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Symmetric reflector ideal for narrow aisles in library, supermar-ket or stockroom. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dimmable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Width 2 m / 6.56'
0.5 – 1 mHeight 4 m /
13.1'
1.65' – 3.28'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – SN
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– S
N
58
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 SN S N 15.0 /4.6
1,693 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,198 /900
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
3,856 /1,100
Super- Output
S O
I 9 9 9 9 S N S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– S
N
59
Technical information
XX 2 x 34° Symmetric wide reflector
• Slightly wide, sym. light distribution for illuminating two vertical surfaces (wall / shelf) with a homogeneous distribution of brightness without a visible lamp
• Precise aluminum reflector optic wall washer with 2 x 34° symmetric
• 79 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3,9 " x 3,9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Symmetric reflector ideal for wide aisles in library, supermarket or stockroom. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technol-ogy. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dim-mable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m / 500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
1 – 2 m3.28' – 6.56'
Width 4 m / 13.1'
Height 4 m / 13.1'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – SW
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– S
W
60
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 SW S W 15.0 /4.6
1,693 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,198 /900
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
3,856 /1,100
Super- Output
S O
I 9 9 9 9 S W S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– S
W
61
Technical information
XX 1 x 23° Asymmetric narrow reflector
• Very narrow, asym. light distribution for illuminating one vertical surface (wall / shelf) with a homogeneous distribution of brightnesswithout a visible lamp
• Precise aluminum reflector optic wall washerwith 1 x 23° asymmetric
• 79 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Asymmetric reflector ideal for shelf lighting with minimal fitting-shelf distance. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technol-ogy. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dim-mable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
0.5 – 1 mHeight 4 m /
13.1'
1.65' – 3.28'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – AN
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– A
N
62
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 AN A N 15.0 /4.6
1,693 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,198 /900
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
3,856 /1,100
Super- Output
S O
I 9 9 9 9 A N S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– A
N
63
Technical information
XX 1 x 34° Asymmetric wide reflector
• Slightly wide, asym. light distribution for illuminating one vertical surface (wall / shelf) with a homogeneous distribution of brightnesswithout a visible lamp
• Precise aluminum reflector optic wall washerwith 1 x 34° asymmetric
• 79 % Optical efficiency
LED luminaire in IP20 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Asymmetric reflector ideal for shelf lighting with larger fitting-shelf distance. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technol-ogy. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dim-mable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm x 99 mm wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
3.28' – 6.56'1 – 2 m
Height 4 m / 13.1'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – AW
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– A
W
64
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 AW A W 15.0 /4.6
1,693 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,198 /900
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
3,856 /1,100
Super- Output
S O
I 9 9 9 9 A W S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– A
W
65
Technical information
XX Opal wide cover with collimator
• All around symmetric and wide light distribution for very uniform illumination
• Wide opal PMMA design cover for a pleasant,dot-free light
• 80 % Optical efficiency
LED luminaire in IP40 for task or general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Opal optics in combination with collimator enabling homogenous and efficient general lighting. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an ex-tended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dimmable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m /
500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K
IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP40Protection class:
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Width 2.5 m / 8.3'
Height 2.5 m / 8.3'
Surface-mounted
Pendant
Surface-mounted
Pendant
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
XOOMINAIRE™ 9999 – OW
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– O
W
66
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 OW O W 15.0 /4.6
1,714 /500
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,238 /900
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
3,905 /1,100
Super- Output
S O
I 9 9 9 9 O W S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– O
W
67
Technical information
XX Collimator
• Wide and deep light distribution for generous illumination of areas up to a light point height of 6 m / 19.7'
• 0pen plastic tray for technical illumination with a high efficiency
• 96 % Optical efficiency
LED luminaire in IP20 for general lighting with integrated PSU and controller. 99 mm x 99 mm (3.9" x 3.9") form factor housing made from extruded and anodized aluminum profile and screwed aluminum end caps available in silver, black or white (white powder coated) color as surface-mounted or pendant version. Stand-Alone luminaires are delivered with 2 m (6.56') transparent 3 or 5 wires cable (on/off or DALI) open end cable feeded on one-side. Easy continuous row installation and cabling thanks to pre-installed terminal blocs. Collimator optics for effcient lighting. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with ceramic LED packages a ther-mal resistivity of 14.3 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of > 85 ensuring a remarkable light quality. Protected against electrostatic discharge +/– 2,000 V and polarity miswiring. Fully flicker-free dimmable with constant current reduction (CCR) in combination with PWM. Engineered and produced in Germany.
Dimensions: 99 mm / 3.9" wide, 99 mm / 3.9" highLengths: 1,400 mm / 4.59' Material: Anodized aluminum (RAL 9006 is standard)Lumen power levels (approx: 1,800 lm/m, 3,400 lm/m, 4,100 lm/m / 500 lm/ft, 1,000 lm/ft, 1,200 lm/ftColor temperatures: 2,700 K, 3,000 K, 3,500 K, 4,000 K IQ White – Tunable white on request Color rendering index: CRI > 85Lifetime: L80/~60.000 hrs, please see page 91Light control: on/off, DALIIP-rating: IP20Protection class:
Pendant
Pendant
Surface-mounted
Surface-mounted
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
99 mm / 3.9"
Total length 1,412 mm / 55.59"
99 mm / 3.9"
99 mm / 3.9"
PSU
Total length 1,409 mm / 55.47"
99 mm / 3.9"
99 mm / 3.9"
PSU
Pend
ant /
Sur
face
-mou
nted
Pend
ant /
Sur
face
-mou
nted
Stand-Alone
Continuous-Row
Width 3.5 m / 11.5'
Height 6 m / 19.7'
XOOMINAIRE™ 9999 – CO
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– C
O
68
LPEN L PEDALI +
DALI –N
Order matrixConfigure your standard luminaire by completing the order code by the digits not yet defined.
Cabling
A The power consumption refers to the length of the luminous surface under consideration of a 10% loss of the PSU.B The performance data refer to the light source standardised to one meter and no power loss of the ballast. Depending on the length and design, the connected wattage increases by the ballast loss, which can range from 7% to 15%.
Lumen values according to LED Linear™ Lamp in a thermally steady state operation. The photometrically determined luminous flux can be found by downloading the photometric data (ies / LDT) on our website www.led-linear.com.C The lengths listed correspond to Stand-Alone fittings (-SA). Continuous Row (-CR) luminaires are delivered without end caps and therefore have 6 mm shorter lengths.
Further information on the content of your standard lighting package, accessory, lifetime as well as the Terms & Conditions and Warranty can be found from page 90 on.
The following accessories will be delivered with the luminaires in appropriate quantities.Delivered mounting accessories:
Pendant luminaires (P) VarioPendant 9999 2 m (6.56') long pendant set with fastening parts.
Ceiling luminaire (C) Ceiling Set 9999 Ceiling mounting brackets
Continuous Row (-CR) XOOMINAIRE™ Luminaire Connector Set of 2 mechanical connectors pre-installed on one-end of the fitting.
Protection MountingProfile color Profile Optic
W/m / W/ftA
lm/m /lm/ftB
Light intensity
CCT (K) Control
Voltage(V)
Length (mm / ft)C
Stand-Alone/ Continuous Row
Indoor I Ceiling C Silver S 9999 9 9 9 9 CO C O 15.0 /4.6
2,057 /600
High-Efficiency
H E 3,000 3 0 On/Off A 230 E 1,412 /4.63
1 4 1 2 Stand-Alone -SA
Pendant P Black B 31.0 /9.4
3,886 /1,100
High-Output
H O 4,000 4 O DALI C 100 – 277 W Continuous Row -CR
White W 40.5 /12.3
4,686 /1,400
Super- Output
S O
I 9 9 9 9 C O S 0 1 4 1 2
Luminaire ON/OFF Luminaire DALI
Tech
nica
l & S
ervi
ce A
ppen
dix
Cust
om S
olut
ions
Stan
dard
Sol
utio
ns |
XOOM
INAI
RE™
9999
– C
O
69