y iron man tap handle - media.prusaprinters.org€¦ · an iron man tap handle i made for my...
TRANSCRIPT
Summary
An Iron Man Tap Handle I made for my kegerator. I printed in PLA at 75%with support. The hole in the bottom is for a tap handle insert. Print,remove the support including the support inside the hole in the bottom,and thread in the insert. If the hole is too small, heat up the insert and youcan thread it in hot because it melts the PLA.
Household > Kitchen
taphandle marvel ironman homebrewing homebrew
beertaphandle
Category: Kitchen & Dining Print Settings
Printer Brand: Robo 3D
Printer: R1 ABS + PLA Model
Rafts: Doesn't Matter
Supports: Yes
Infill: 75%
N NickB
Iron Man TapHandle
VIEW IN BROWSER
updated 14. 4. 2020 | published 14. 4. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
851.0 KBupdated 14. 1. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
avengers_taps-im.stl