y-leg bench system - hpl contracthplcontract.com/wp-content/uploads/2012/05/hpl-preso-1.4... ·...
TRANSCRIPT
Y-Leg Bench SystemProduct Catalog and Planning Guide
Y-Leg Bench SystemMade in U.S.A.
HPL Contract, Patterson, California
180° planning1. specify base modules
2. specify extension modules to reach thedesired length
base module• work surface• universal beam• power and data components*• 2 Y-leg supports
* power infeed to be specified separately
extension module• work surface• universal beam• power and data components*• 1 Y-leg support
* up to five modules can be poweredby on e power infeed
Y-leg supportprovides stability andsupport while keeping theunderside of the benchfree from obstruction
screenprovides privacy and isavailable in a tackable ormarkerboard finish
work surface30” deep on each side60” or 72” widewith center grommet
universal beamprovides power & dataoutlets and cablemanagement. All powercomponents (exceptinfeed) are included
180° componentsa simple kit of parts provides flexibility in
configuration and design
center storagecan be added in place ofa screen to providestorage for either side ofthe bench workspace
120° planning1. specify base modules
2. specify extension modules to reach thedesired configuration
base module• 3 corner work surfaces• 3 universal beams• power and data components*• 3 Y-leg supports• center triangle support
* power infeed to be specified separately
extension module B• allows connectionsto 3 base or extensionmodules
extension module A• allows connectionsto 1 base and 1extension modules
base module• allows connection to3 extension modules
building blocksmultiple configurationscan be specified using thebase module andextension modules A & B
90° extension modulecan be added to the end of a 120°module to provide a common areaor printer station
120° componentsa simple kit of parts provides flexibility in
configuration and design
mobile storageprbox+file, mobile filepedestal with an optionalcushion topspecify separately
work surface24” deep on each side,48”x 48” with centergrommet
center shelfcan be added in place ofa screen to provide anadditional storage surface
return surfacecan be added foradditional surface areaand spatial definition
power infeedconnects to buildingpower, eight wire - fourcircuit capacityspecify separately
the expandable beam adjusts to allowconnections between any work surface.this flexibility allows reconfigurationafter initial installation, without the needto purchase additional components.
expand and connectintegrated clips align beam withY-leg supports. metal to metalcontacts allow for rigidconnections.
re-use and creditour components can be integratedinto existing conditions and canbe updated in increments.
3.Add storage with dual sided
storage boxes to complete thespace.
1.HPL freestanding beam systemprovides power and data access
to free standing desks.
2.Re-use existing beams, add
Y-legs, tops and screens. HPLprovides a credit back for each
of the 25” high T-legs.
8 wire, 4 circuit power system uses 2neutrals and 2 grounds and is rated for20 amps. the fourth circuit is isolatedand dedicated and is serviced by its ownline conductor, neutral and isolatedground.
Neutral 2Neutral 1Iso GroundGroundHot 4Hot 3Hot 2Hot 1
Circuit 1 Circuit 2 Circuit 3 Circuit 4
power and dataintegrated cable managementresults in clean and safework spaces
power infeed cable connects buildingpower to Y-leg bench power blocks, fixedinside the universal beam. data cablescan be routed into the universal beamfrom access ports on the underside ofthe beam.
HPL Contract
www.hplcontract.com