y p.b.c.o. - plastic bottle cap opener...this bottle opener should fit on every plastic bottle with...
TRANSCRIPT
Summary
This bottle opener should fit on every plastic bottle with a cap diameter of< 30mm like water bottles, Coca Cola bottles, etc.
Originally I created this for my grandma, who has trouble opening waterbottles by hand and struggles with regular openers. I tried various versionsuntil I eventually came up with this design. Now she is finally able to openbottles by herself again.
What you additionally need:
Steel File 2x 20mm M3 Screws 2x M3 Nuts
An M3 x 16mm screw for fastening the attachment would be fine too butyou need to shorten it anyway for the ideal fit, so it doesn't matter.
Make sure that you sharpen the other screw, with a file like it is shown inthe pictures. It acts as a tooth for the bottle cap and it may not workproperly otherwise. A too-long screw also harms the functionality, so if itdoesn't work well for you, try to shorten the screw a little bit more.
Happy printing! :)
Household > Other House equipment
pbco seniors elderly capopener plastic opener cap
bottleopener bottle
B Bezis
P.B.C.O. - PlasticBottle Cap Opener
VIEW IN BROWSER
updated 22. 5. 2020 | published 22. 5. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
505.5 KBupdated 22. 5. 2020
252.7 KBupdated 22. 5. 2020
For the handle is no additional support needed! You can remove mycustom support with a screwdriver or knife afterward.
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
thehandle.stl
notthehandle.stl