reddadsteve

Snoopy

VIEW IN BROWSER

updated 3. 2. 2019 | published 3. 2. 2019

PRUSAPRINTERS

Summary

Snoopy, from the comic strip Peanuts by Charles Schulz.

Snoopy is Charlie Brown's pet beagle. He is is a loyal, innocent,imaginative and good-natured beagle who is prone to imagining fantasylives, including being an author, a college student known as "Joe Cool" anda World War I Royal Flying Corps ace.

Other than some very small supports for one piece, no supports arerequired. If you have the proper filament colors, no painting is needed.

The assembled model is 190mm tall and is in proportion to the otherPeanuts characters.

Enjoy!

Toys & Games > Action Figures & Statues

cartoon comics peanuts

Rafts: NoSupports: NoResolution: .2 mmInfill: 10%

3D M

ODEL

ONLY

Note: I listed this as a 'no support' model, however one piece requires avery small amount of supports. Refer to the below sections for details.

Building the ModelColors (there are no multiple printed pieces)

Black:noseear_rightear_lefteye_righteye_lefttext..Red:house_tophouse_bottomcollar..White:headbody (see below for minor supports required)..

Printing and assembly tips

Printing tips1-As with most of my models, I strive to make all the pieces support free.However in this model some supports are required for the body.stl part. Iused .1mm supports with a 60% overhang criteria (depending on yourslicer, that could be 30%). You should only have supports under the armareas.

2-The parts should fit nicely when printed cleanly or with a slight first layersquish.

3-The eye pieces have very small bases. Personally, I printed these pieceswith a brim. There is plenty of leeway to insert the eyes so a thoroughcleaning of the brim is not required to have the pieces fit.

Assembly tips:1-The left/right eyes and ears are not interchangeable but should be easyto tell which is which.

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

40.5 KBupdated 3. 2. 2019

21.9 KBupdated 3. 2. 2019

425.6 KBupdated 3. 2. 2019

21.9 KBupdated 3. 2. 2019

299.9 KBupdated 3. 2. 2019

202.4 KBupdated 3. 2. 2019

123.2 KBupdated 3. 2. 2019

2-The house contains slight indents for easy positioning of the textcharacters.

3-Refer to the assembly diagram for putting the model together. Themodel is meant to be glued.

nose.stl

eye_right.stl

house_top.stl

eye_left.stl

collar.stl

text.stl

ear_right.stl

634.6 KBupdated 3. 2. 2019

123.2 KBupdated 3. 2. 2019

102.9 KBupdated 3. 2. 2019

3.3 MBupdated 3. 2. 2019

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

head.stl

ear_left.stl

house_bottom.stl

body.stl