yealink sip-t19p user guide v71 30
TRANSCRIPT
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
1/124
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
2/124
ii
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO., LTDCopyright 2013 Yealink Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written
permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes
translating into another language or format.
When this publication is made available on media, Yealink Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private
use but not for redistribution. No parts of this publication may be subject to alteration,
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any
damages arising from use of an illegally modified or altered publication.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.
YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this guide.
Hereby, Yealink Network Technology CO.,LTD. declares that this phone is in conformity
with the essential requirements and other relevant provisions of the CE, FCC.
This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
3/124
iii
Note: This device is tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experience radio/TV technician for help.
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
We are striving to improve our documentation quality and we appreciate your feedback. Email
your opinions and comments [email protected].
mailto:[email protected]:[email protected]:[email protected]:[email protected] -
8/12/2019 Yealink SIP-T19P User Guide V71 30
4/124
iv
Yealink SIP-T19P firmware contains third-party software under the GNU General Public License (GPL).
Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and
conditions of the license.
The original GPL license, source code of components licensed under GPL and used in Yealink products can
be downloaded online:
http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293.
http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293 -
8/12/2019 Yealink SIP-T19P User Guide V71 30
5/124
About This Guide
v
Thank you for choosing the SIP-T19P IP phone, exquisitely designed to provide business
telephony features, such as Call Hold, Call Transfer, Multicast Paging and Conference
over an IP network.
This guide provides everything you need to quickly use your new phone. First, verify
with your system administrator that the IP network is ready for phone configuration. Also
be sure to read the Packaging Contents and Regulatory Notices sections in this guide
before you set up and use the SIP-T19P IP phone.
If this is your first time using the SIP-T19P IP phone, we recommend that you first refer to
the Quick Installation Guideand Quick Reference Guide, available online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
Note
This is the first edition based on firmware version 71. Topics provided in this guide
include:
Chapter 1 Overview
Chapter 2 Getting Started
Chapter 3 Customizing Your Phone
Chapter 4 Basic Call Features
Chapter 5 Advanced Phone Features
Shared Line, Network Directory, Network Call Log, Call Park and Automatic CallDistribution features are disabled for IP phones in neutral version, which are designed forBroadWorks environment. Please contact your system administrator for more
information.
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142 -
8/12/2019 Yealink SIP-T19P User Guide V71 30
6/124
User Guide for the SIP-T19P IP Phone
vi
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
7/124
Table of Contents
vii
About This Guide ...................................................................... vIn This Guide ......................................................................................................................... v
Table of Contents ..................................................................... viiOverview .................................................................................. 1
Hardware Component Instructions .................................................................................... 1Icon Instructions .................................................................................................................... 2User Interfaces ..................................................................................................................... 4
Phone User Interface ........................................................................................................ 4Web User Interface ........................................................................................................... 4
Documentations ................................................................................................................... 7Getting Started ......................................................................... 9
Packaging Contents ............................................................................................................. 9Phone Installation ............................................................................................................... 11 Phone Initialization ............................................................................................................. 13Phone Status ....................................................................................................................... 13Basic Network Settings ...................................................................................................... 14Registration ......................................................................................................................... 16Idle Screen .......................................................................................................................... 16
Customizing Your Phone ......................................................... 17General Settings ................................................................................................................ 17
Contrast ............................................................................................................................ 17Language......................................................................................................................... 18Time & Date ..................................................................................................................... 19Administrator Password ................................................................................................. 20Key as Send ..................................................................................................................... 21Keypad Lock .................................................................................................................... 22
Audio Settings .................................................................................................................... 24Volume ............................................................................................................................. 24Ring Tones ........................................................................................................................ 25
Contact Management ....................................................................................................... 27Directory........................................................................................................................... 27Local Directory ................................................................................................................ 28
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
8/124
User Guide for the SIP-T19P IP Phone
viii
Blacklist ............................................................................................................................ 38Remote Phone Book ........................................................................................................ 39
Call History Management ................................................................................................ 42System Customizations ...................................................................................................... 44
Logo Customization ........................................................................................................ 44Headset Use .................................................................................................................... 45Programmable Keys ....................................................................................................... 46 Account Registration ....................................................................................................... 50 Dial Plan ........................................................................................................................... 51 Emergency Number ........................................................................................................ 56Live Dialpad .................................................................................................................... 57Hotline .............................................................................................................................. 57
Basic Call Features ................................................................. 59Placing Calls ....................................................................................................................... 59Answering Calls ................................................................................................................. 61Ending Calls ........................................................................................................................ 62 Redialing Numbers ............................................................................................................ 63Recent Call In Dialing ........................................................................................................ 63Auto Answer ....................................................................................................................... 64Auto Redial .......................................................................................................................... 65 Call Completion ................................................................................................................. 66Call Return ........................................................................................................................... 67Call Mute ............................................................................................................................. 68Call Hold/Resume ............................................................................................................... 68 Do Not Disturb (DND) ........................................................................................................ 69Call Forward ....................................................................................................................... 70Call Transfer ........................................................................................................................ 73Call Waiting ........................................................................................................................ 74Conference ......................................................................................................................... 75
Local Conference ............................................................................................................ 75 Network Conference ...................................................................................................... 76
Call Pickup .......................................................................................................................... 78Anonymous Call ................................................................................................................. 82Anonymous Call Rejection ................................................................................................ 83
Advanced Phone Features .................................................... 85Hot Desking ........................................................................................................................ 85Intercom .............................................................................................................................. 87Multicast Paging ................................................................................................................. 88Music on Hold ..................................................................................................................... 90Messages ............................................................................................................................ 91
Short Message Service (SMS) ...................................................................................... 91
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
9/124
Table of Contents
ix
Voice Mail ........................................................................................................................ 93Message Waiting Indicator (MWI) ............................................................................... 94
Troubleshooting ...................................................................... 99Regulatory Notices ................................................................109
Service Agreements ........................................................................................................ 109Limitations of Liability ...................................................................................................... 109Safety Instructions ............................................................................................................ 109
Appendix A - Time Zones ......................................................111
Index ......................................................................................113
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
10/124
User Guide for the SIP-T19P IP Phone
x
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
11/124
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
12/124
User Guide for the SIP-T19P IP Phone
2
Hardware component instructions of the SIP-T19P IP phone are:
Item Description
LCD Screen
Shows information about calls, messages, soft keys,
time, date and other relevant data:
Call informationcaller ID, call duration
Icons(for example, )
Missed call text or second incoming caller information
Prompt text (for example, "Saving config file!")
Time and date
Power Indicator LED Indicates phone power status and phone status.
Scroll through the displayed information.
Confirms actions or answers incoming calls.
Mute Key Mutes or un-mutes calls.
Message Key Indicates and accesses voice mails.
Transfer Key Transfers a call to another party.
Headset Key Toggles the headset mode.
Speakerphone Key Toggles the hands-free speakerphone mode.
RD Key Redials a previously dialed number.
Volume KeyAdjusts the volume of the handset, headset, speaker,
and ringer.
KeypadProvides the digits, letters and special characters in
context-sensitive applications.
Soft KeysLabel automatically to identity their context-sensitive
features.
Icons appearing on the LCD screen are described in the following table:
Icon DescriptionNetwork is unavailable
Registered successfully
Registration failed
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
13/124
Overview
3
Icon DescriptionRegistering
Hands-free speakerphone mode
Handset mode
Headset mode
Multi-lingual lowercase letters input mode
Multi-lingual uppercase letters input mode
Alphanumeric input mode
Numeric input mode
Multi-lingual uppercase and lowercase
letters input mode
Voice Mail
Text Message
Auto Answer
Do Not Disturb
Call Forwarded/Forwarded Calls
Call Hold
Call Mute
Ringer volume is 0
Keypad Lock
Received Calls
Placed Calls
Missed Calls
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
14/124
User Guide for the SIP-T19P IP Phone
4
Two ways to customize configurations of your SIP-T19P IP phone:
The user interface on the IP phone.
The user interface in a web browser on your PC.
The hardware components keypad and LCD screen constitute the phone user interface,
which allows the user to execute all call operation tasks and basic configuration
changes directly on the phone. In addition, you can use the web user interface to
access all configuration settings. In many cases, either the phone user interface and/or
the web user interface interchangeably. However, in some cases, it is only possible to
use one or the other interface to operate the phone and change settings.
You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to the administrator, and the
default administrator password is admin(case-sensitive). For more information on
customizing your phone with the available options from the phone user interface, refer
toCustomizing Your Phone on page17.
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of
your new phone. To obtain the IP address, press on the phone. Enter the IP address
(e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web browser on your PC.
The default administrator user name and password are both admin(case-sensitive).The options you can use to customize the IP phone via phone user interface and/or via
web user interface are listed in the following table:
Options Phone User Interface Web User InterfaceStatus
--IP Address--IPv6
--MAC
--Firmware
--Network
--Phone
--AccountBasic Phone Settings--Contrast
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
15/124
Overview
5
Options Phone User Interface Web User Interface--Language --Time & Date --Administrator Password --Key as Send --Keypad Lock -- Volume
--Ring Tones --Contact Management
--Directory
--Local Directory --Blacklist --Remote Phone Book
--Call History Management --Logo Customization
--Headset Prior
--Programmable Keys --Account Registration
--Dial Plan --Emergency Number --Live Dialpad --Hotline Basic Call Features
--Recent Call In Dialing--Auto Answer --Auto Redial
--Call Completion
--Call Return
--DND --Call Forward
--Call Transfer
--Call Waiting
--Conference
--Call Pickup
--Anonymous Call
--Anonymous Call Rejection
Advanced Phone Features
--Hot Desking
--Intercom
--Multicast Paging
--Music on Hold
--Messages
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
16/124
User Guide for the SIP-T19P IP Phone
6
Options Phone User Interface Web User InterfaceSIP Account
--User Options
--Register Status
--Activation
--Label
--Display Name
--Register Name
--User Name
--Password
--SIP Server1/2
--Server Option
--Server Port
--Outbound Status --Outbound Proxy
--NAT Traversal
--STUN Status
--STUN Server
Note The table above lists most of the feature options. Please refer to the relevant sections formore information.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
17/124
Overview
7
The following table shows documentations available for the SIP-T19P IP phone.
Name Contents Where found Format/LanguageQuick Installation
Guide
Basic setup of the
phone
In the
packagePDF/English
Quick Reference
Guide
Basic call features and
phone customizations
In the
packagePDF/English
User Guide
Phone/Web user
interface settings
Basic call features and
advanced phone
features
On the
WebsitPDF/English
Note You can also download the latest documentations online:http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142 -
8/12/2019 Yealink SIP-T19P User Guide V71 30
18/124
User Guide for the SIP-T19P IP Phone
8
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
19/124
Getting Started
9
This chapter provides basic installation instructions and information for obtaining the
best performance with the SIP-T19P IP phone. Topics include:
Packaging Contents
Phone Installation
Phone Initialization
Phone Status
Basic Network Settings
Registration
Idle Screen
If you require additional information or assistance with your new phone, contact your
system administrator.
The following components are included in your SIP-T19P IP phone package:
SIP-T19P IP Phone
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
20/124
User Guide for the SIP-T19P IP Phone
10
Phone Stand
Power Adapter
Handset & Handset Cord
Ethernet Cable
Quick Installation Guide & Quick Reference Guide
Check the list before installation. If you find anything missing, contact your system
administrator.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
21/124
Getting Started
11
If your phone is already installed, proceed toPhone Initializationon page13.This section introduces how to install the phone:
1) Attach and detach the stand2) Connect the handset and optional headset3) Connect the network and power
1) Attach the stand and detach the standa) Attach the stand
b) Detach the stand
2) Connect the handset and optional headset
Note
3) Connect the network and powerYou have two options for power and network connections. Your system administrator will
A headset is not included in the packaging contents. Contact your system administratorfor more information.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
22/124
User Guide for the SIP-T19P IP Phone
12
advise you which one to use.
AC power
Power over Ethernet (PoE)
AC PowerTo connect the AC power:1. Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.
2. Connect the included or a standard Ethernet cable between the Internet port on thephone and the one on the wall or switch/hub device port.
Power over EthernetWith the included or a regular Ethernet cable, the SIP-T19P IP phone can be powered
from a PoE-compliant switch or hub.
To connect the PoE:1. Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power switch/hub.
Note If in-line power switch/hub is provided, you dont need to connect the phone to the poweradapter. Make sure the switch/hub is PoE-compliant.
The phone can also share the network with another network device such as a PC(personal computer). It is an optional connection.
Important Do not unplug or remove power to the phone while it is updating firmwareand configurations.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
23/124
Getting Started
13
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone InitializationThe phone finishes the initialization by loading the saved configuration. The LCD screen
displays Initializingplease wait during this process.
DHCP (Dynamic Host Configuration Protocol)The phone attempts to contact a DHCP server in your network to obtain valid IPv4 and
IPv6 network settings (e.g., IP address, subnet mask, default gateway address and DNS
address) by default.
Note
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
Network status (e.g., IPv4 status, IPv6 status, IP mode and MAC address).
Phone status (e.g., device model, hardware version, firmware version, product ID,
MAC address and device certificate status: factory, installed and not installed).
Account status (e.g., the register status of SIP account).
To view the phone status via phone user interface:1. Press , or press Menu->Status.2. Press or to scroll through the list and view the specific information.
To view the phone status via web user interface:1. Open the web browser of your computer.2. Enter the IP address in the browsers address bar, and then press Enter.
If your network does not use DHCP, proceed toBasic Network Settingson page14.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
24/124
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
25/124
Getting Started
15
Port.2. Press or to select IPv4,IPv6or IPv4 & IPv6from the IP Modefield.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.To configure a static IPv4 address via phone user interface:1. Press Menu->Settings->Advanced Settings(password: admin) ->Network->WAN
Port->IPv4->Static IP Client.2. Enter the desired values in the IP Address,Subnet Mask,Default Gateway, Pri.DNS
and Sec.DNSfields respectively.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.To configure a static IPv6 address via phone user interface:1. Press Menu->Settings->Advanced Settings(password: admin) ->Network->WAN
Port->IPv6->Static IPv6 Client.2. Enter the desired values in theIPv6,IPv6 Prefix, IPv6 Gateway, IPv6 Pri.DNSand
IPv6 Sec.DNS fields respectively.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.If you are using an xDSL modem for IPv4 network connection, you can connect your
phone to the Internet via PPPoE mode. Set the WAN port as a PPPoE port. The PPPoE port
will perform a PPP negotiation to obtain the IP address. Contact your system
administrator for the PPPoE user name and password.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
26/124
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
27/124
Customizing Your Phone
17
You can customize your SIP-T19P IP phone by personally configuring certain settings, for
example, contrast, language and time & date. You can add contacts to the phones
local directory manually or from call history. You can also personalize different ring
tones for different callers.
This chapter provides basic operating instructions for customizing your phone. Topics
include:
General Settings
Audio Settings
Contact Management
Call History Management
System Customizations
If you require additional information or assistance with your new phone, contact your
system administrator.
You can configure the contrast of the LCD screen to a comfortable level.
To configure the contrast via phone user interface:1. Press Menu->Settings->BasicSetting->Contrast.2. Press or , or the Switchsoft key to increase or decrease the intensity of
contrast.
The default contrast level is 6.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.Contrast is configurable via web user interface at the path Settings->Preference.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
28/124
User Guide for the SIP-T19P IP Phone
18
The default language of the phone user interface isEnglish. The phone will detect anduse the same language as which of your web browser for the web user interface. If the
language of your web browser is not supported by the phone, the web user interface
will use English. You can change the language for the phone user interface and the web
user interface respectively.
Note
To change the language for the phone user interface:1. Press Menu->Settings->Basic Setting->Language.2. Press or to select the desired language.
3. Press the Savesoft key to accept the change.Text displayed on the LCD screen will change to the selected language.
To change the language for the web user interface:1. Click on Settings->Preference.2. Select the desired language from the pull-down list of Language.
Not all of the supported languages are available for selection. The available languages
depend on the language packs currently loaded to the IP phone. Please contact your
system administrator for more information on the available languages of your newphone.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
29/124
Customizing Your Phone
19
3. Click Confirmto accept the change.Text displayed on the web user interface will change to the selected language.
The time and date are displayed on the LCD screen when the phone is idle. If the phone
cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server,
you need to configure the time and date manually. For more information on the SNTP
server, contact your system administrator.
To configure the SNTP settings via phone user interface:1. Press Menu->Settings->Basic Setting->Time & Date->SNTP Settings.
2. Press or , or the Switchsoft key to select the time zone that applies to yourarea from the Time Zonefield.The default time zone is "+8 China(Beijing)".
3. Enter the domain names or IP addresses in the NTP Server 1and NTP Server 2fieldsrespectively.
4. Press or , or the Switchsoft key to select the desired value from the DSTfield.
5. Press the Savesoft key to accept the change or the Backsoft key to cancel.
Note
To configure the time and date manually via phone user interface:1. Press Menu->Settings->Basic Setting->Time & Date->Manual Settings.2. Enter the specific date in theDate field.3. Enter the specific time in theTime field.
Please refer toAppendix A - Time Zonesfor the list of available time zones on the IPphone.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
30/124
User Guide for the SIP-T19P IP Phone
20
4. Press the Savesoft key to accept the change.The date and time displayed on the LCD screen will change accordingly.
To configure the time and date format via phone user interface:1. PressMenu->Settings->Basic Setting->Time & Date->Time & Date Format.
2. Press or , or the Switchsoft key to select the desired time format from theClockfield.
3. Press or , or the Switchsoft key to select the desired date format from theDate Formatfield.
4. Press the Savesoft key to accept the change or the Backsoft key to cancel.There are 7 available date formats. For example, for the date format WWW DD MMM,
WWW represents the abbreviation of the week, DD represents the two-digit day,
and MMM represents the first three letters of the month.
The date formats you need to know:
Date Format Example(2013-1-16)WWW MMM DD Wed Jan 16
DD-MMM-YY 16-Jan-13
YYYY-MM-DD 2013-01-16
DD/MM/YYYY 16/01/2013
MM/DD/YY 01/16/13
DD MMM YYYY 16 Jan 2013
WWW DD MMMWed 16 Jan
Time and date is configurable via web user interface at the path Settings->Time & Date.
The Advanced Settings option is only accessible to the administrator. The default
administrator password is admin. For security reasons, you should change the default
administrator password as soon as possible.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
31/124
Customizing Your Phone
21
To change the administrator password via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Set Password.
2. Enter the current password in the Current PWDfield.3. Enter the new password in the New PWDfield.4. Enter the new password again in the Confirm PWDfield.5. Press the Savesoft key to accept the change or the Backsoft key to cancel.Administrator password is configurable via web user interface at the path
Security->Password.
You can set the # or * to perform as a send key while dialing.
To configure key as send via phone user interface:1. Press Menu->Features->Key as Send.2. Press or , or the Switchsoft key to select #or *from the Key as Sendfield,
or select Disableto disable this feature.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.Key as send is configurable via web user interface at the path Features->GeneralInformation.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
32/124
User Guide for the SIP-T19P IP Phone
22
You can lock the keypad of your phone temporarily when you are not using it. This
feature helps you to protect your phone from unauthorized use.
Keypad lock consists of the following:
Menu Key: The Menu soft key is locked. You cannot access the menu of thephone until unlocked.
Function Keys: The function keys are locked. You cannot use the Message, Mute,RD, Transfer, , navigation keys and soft keys until unlocked.
All Keys: All keys are locked except the Volume key. You are only allowedto dial emergency numbers; answer incoming calls by lifting the
handset, pressing the Speakerphone key, the Headset key or the
key, place an active call on hold by pressing the Hold soft key,
resume the held call by pressing the Resume soft key, and end
the call by hanging up the handset or pressing the
Speakerphone key.
Note
To activate the keypad lock via phone user interface:1. Press Menu->Settings->Advanced Settings(password: admin) ->KeypadLock.2. Press or , or the Switchsoft key to select the desired type from the Keypad
Lock field.
3. Press the Savesoft key to accept the change.4. Long press to lock the keypad immediately when the phone is idle.
The LCD screen prompts Keypad locked.and displays the icon .
The emergency number setting, if desired, must be made before lock activation.Formore information, refer toEmergency Number on page56.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
33/124
Customizing Your Phone
23
You can configure the interval (in seconds) to automatically lock the keypad instead of
long pressing .
To configure the interval of automatic keypad lock via web user interface:1. Click on Features->Phone Lock.2. Enter the desired interval in thePhone Lock Time Out (0~3600s) field.
3. Click Confirmto accept the change.
Note
To unlock the keypad, you must know the keypad unlock PIN of the phone. The default
keypad unlock PIN is 123.
To change the keypad unlock PIN via phone user interface:1. Press Menu->Settings->Basic Setting->Phone Unlock PIN.
2. Enter the current PIN in the Current PINfield.3. Enter the new PIN in the New PINfield.4. Enter the new PIN again in the Confirm PINfield.5. Press the Savesoft key to accept the change or the Backsoft key to cancel.
Note
The default interval is 0 second, that is, you can long press to lock the keypad only.
The interval of automatic keypad lock is configurable via web user interface only.
The unlock PIN length must be within 15 characters.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
34/124
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
35/124
Customizing Your Phone
25
To adjust the volumewhen the phone is idle:1. Press to adjust the ringer volume.
Note
To adjust the volumewhen the phone is during a call:1. Press to adjust the volume of currently engaged audio device
(handset, speakerphone or headset).
Ring tones are used to indicate incoming calls. You can select different ring tones to
distinguish your phone from your neighbors.
To select a ring tone for the phone via phone user interface :1. Press Menu->Settings->Basic Setting->Ring Tone.2. Press or to select the desired ring tone.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.
If the ringer volume is adjusted to minimum, the icon will appear on the LCD screen.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
36/124
User Guide for the SIP-T19P IP Phone
26
To select a ring tone for the account via web user interface:1. Click on Account->Basic.2. Select the desired ring tone from the pull-down list of Ring Type.
If Commonis selected, this account will use the ring tone selected for the phone.Refer to the above instruction.
3. Click Confirmto accept the change.
Note
To upload a custom ring tone for your phone via web user interface:1. Click on Settings->Preference.2. ClickBrowseto locate a ring tone (file format must be *.wav) file from your local
system.
A ring tone for the account is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
37/124
Customizing Your Phone
27
3. ClickUploadto upload the file.
Note
This section provides the operating instructions for managing contacts. Topics include:
Directory
Local Directory
Blacklist
Remote PhoneBook
Directory provides easy access to frequently used lists. The lists may contain Local
Directory, History and Remote Phone Book.
To configure the directory via web user interface:1. Click on Directory->Setting.2. In the Directoryblock, select the desired list from the Disabledcolumn and then
click .
The selected list appears in the Enabled column.3. Repeat step 2 to add more lists to the Enabled column.4. To remove a list from theEnabledcolumn, select the desired list and then click .
The ring tone for an incoming call on the phone may be different. For example, when thephone receives an incoming call from a contact stored in the local directory, it will playthe ring tone assigned to the contact in the contact directory (refer toAdding Contacts).
If no ring tone is assigned to the contact, the phone will play the ring tone assigned to theassociated group (refer toAdding Groups). Otherwise, the phone will play the ring toneassigned to the account. If no ring tone is assigned to the account, the phone will play the
ring tone assigned for the phone.
All custom ring tone files must be within 100KB. Uploading custom ring tones for your
phone is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
38/124
User Guide for the SIP-T19P IP Phone
28
5. To adjust the display order of enabled lists, select the desired list and then clickor .
The LCD screen displays the list(s) in the adjusted order.
6. Click Confirm to accept the change.
Note
To check the directoryvia phone user interface:1. Press the Dirsoft key when the phone is idle.
The LCD screen displays the list(s) in the directory.
If there is only one list in the directory, press the Dirsoft key to enter this list directly.
The built-in phone directory can store contact names and numbers. You can store up to
1000 contacts and 6 groups (including the default All Contacts, Company, Family and
Friend) in your phone's local directory; add new contacts and groups; edit, delete or
search for a contact; or simply dial a contact number from the local directory.
Directory is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
39/124
Customizing Your Phone
29
To add a group to the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Press theAddGrp soft key.3. Enter the desired group name in the Namefield.4. Press or to select the desired group ring tone from the Ring Tonesfield.
If Autois selected, this group will use the ring tone assigned to the account. Formore information on ringtone for an account, refer toRing Tones on page25.
5. Press the Addsoft key to accept the change or the Backsoft key to cancel.
To edit a group in the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Select the desired group.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
40/124
User Guide for the SIP-T19P IP Phone
30
3. Press the Optionsoft key, and then select Detailfrom the prompt list.
4. Press or to scroll through the group information and then edit.5. Press the Savesoft key to accept change or the Backsoft key to cancel.
To delete a group from the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Select the desired group.3. Press the Optionsoft key, and then select Deletefrom the prompt list.
The LCD screen prompts Delete Selected Group?.
4. Press the Oksoft key to confirm the deletion or the Cancelsoft key to cancel.You can also delete all groups by pressing the Option soft key and then selectDel All.For more information, refer to the above steps.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
41/124
Customizing Your Phone
31
You can add contacts to the local directory in the following ways:
Manually
From call history
From remote phone book
Adding Contacts ManuallyTo add a contact to the local directory manually:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Select the desired group and then press the Entersoft key.3. Press the Addsoft key.4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press or , or the Switchsoft key to select the desired ring tone from theRingTonesfield.If Auto is selected, this contact will use the ring tone assigned to the group.
6. Press the Addsoft key to accept the change or the Backsoft key to cancel.
Note If the contact has existed in the directory, the LCD screen will prompt Contact Nameexisted!.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
42/124
User Guide for the SIP-T19P IP Phone
32
Adding Contacts from Call HistoryTo add a contact to the local directory from the call history:1. Press the Historysoft key.2. Press or to select the desired entry.3. Press the Optionsoft key, and then select Add to Contactsfrom the prompt list.
4. Enter the contact name.5. Press the Savesoft key to accept the change.
The entry is successfully saved to the local directory.
Adding Contacts from Remote Phone BookTo add a contact to the local directory from remote phone book:1. PressMenu->Dir->Remote Phone Book.
If Remote Phone Book is added to the directory, pressDir->Remote Phone Booktoenter remote phone book.
2. Press or to select the desired contact.3. Press the Optionsoft key, and then select Add to Contactsfrom the prompt list.4. Press the Savesoft key to save the contact in the local directory.
If the contact has already existed in the local directory, the LCD screen will prompt
Overwrite the original contact?.Press the Oksoft key to overwrite the originalcontact in local directory or the Cancelsoft key to cancel.
For more information on remote phone book operating, refer toRemote PhoneBookon
page39.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
43/124
Customizing Your Phone
33
To edit a contact in the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Select the desired group and then press the Entersoft key.3. Press or to select the desired contact.4. Press the Optionsoft key, and then select Detailfrom the prompt list.5. Press or to scroll through the contact information and then edit.
6. Press the Savesoft key to accept change or the Backsoft key to cancel.
To delete a contact from the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
44/124
User Guide for the SIP-T19P IP Phone
34
2. Select the desired group and then press the Entersoft key.3. Press or to select the desired contact.4. Press the Optionsoft key, and then select Deletefrom the prompt list.
The LCD screen prompts Delete Selected Item?.
5. Press the Oksoft key to confirm the deletion or the Cancelsoft key to cancel.
To place a call to a contact from the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Select the desired group and then press the Entersoft key.3. Press or to select the desired contact.4. Do one of the following:
-
If only one number of the contact is stored in the local directory, press the DIALsoft key to dial out the number.
- If multiple numbers of the contact are stored in the local directory, press the
DIALsoft key to display a list of numbers.Press or to select the desired number.
Press the DIAL soft key to dial out the number.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
45/124
Customizing Your Phone
35
To search for a contact in the local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directoryby default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Press or to scroll to the All Contactsfield.3. Press the Searchsoft key.4. Enter a few continuous characters of the contact name or number using the keypad.
The contacts whose name or number matches the characters entered will appear
on the LCD screen. You can dial from the result list.
You can search for a contact in your desired lists when the phone is in the dialing screen.
The lists may contain Local Directory, History and Remote Phone Book.
To configure search source list in dialing via web user interface:1. Click on Directory->Setting.2. In the Search Source List In Dialingblock, select the desired list from the Disabled
column and then click .
The selected list appears in the Enabled column.3. Repeat step 2 to add more lists to the Enabled column.4. To remove a list from theEnabledcolumn, select the desired list and then click .5. To adjust the display order of search results, select the desired list and then click
or .
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
46/124
User Guide for the SIP-T19P IP Phone
36
The LCD screen displays the search results in the adjusted order.
6. Click Confirm to accept the change.
Note
To search for a contact in the enabled search source lists:1. Pick up the handset or press the speakerphone.2. Enter a few continuous characters of the contact name or number using the keypad.
The contacts in the enabled search source lists whose name or number matches the
characters entered will appear on the LCD screen. You can press or to
select the desired contact and then place a call to the contact.
Search source list in dialing is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
47/124
Customizing Your Phone
37
You can manage your phones local directory via phone user interface or web user
interface. But you can only import or export the contact list via web user interface.
To import an XML file of contact list via web user interface:1. Click on Directory->Local Directory.2. Click Browseto locate a contact list file (file format must be *.xml) from your local
system.
3. Click Import XMLto import the contact list.The web user interface prompts The original contact will be covered, Continue?.
4. Click OKto complete importing the contact list.To import a CSV file of contact list via web user interface:1. Click on Directory->Local Directory.2. Click Browseto locate a contact list file (file format must be *.csv) from your local
system.
3. (Optional.) Check the Show Title checkbox.It will prevent importing the title of the contact information which is located in the
first line of the CSV file.
4. Click Import CSVto import the contact list.5. (Optional.) Mark theOnradio box in the Delete Old Contacts field.
It will delete all existing contacts while importing the contact list.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
48/124
User Guide for the SIP-T19P IP Phone
38
6. (Optional.) Select the contact information you want to import into the local directoryfrom the pull down list of Index.
7. Click Importto complete importing the contact list.To export contact list via web user interface:1. Click onDirectory->Local Directory.2. Click Export XML(or Export CSV).3. Click Saveto save the contact list to your local system.
Note
The built-in phone directory can store names and numbers for a blacklist. You can store
up to 30 contacts in your phones blacklist; add, edit, delete or search for a contact in
the blacklist; even dial a contact number from the blacklist, but any incoming call from
the blacklist will be rejected automatically.
To add a contact to the blacklist manually:1. Press Menu->Dir->Blacklist.2. Press the Addsoft key.
Importing/exporting contact listsare configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
49/124
Customizing Your Phone
39
3. Enter the name and the office, mobile or other numbers in the corresponding fields.
4. Press the Addsoft key to accept the change or the Back soft key to cancel.To add a contact to the blacklist from local directory:1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directoryto enter the local directory.
2. Press or to select the desired contact.3. Press the Optionsoft key and then select Add To Blacklistfrom the prompt list.
The LCD screen prompts "Move selected to blacklist?".
4. Press the Ok soft key to confirm the setting.For more operating instructions on editing, deleting, placing calls to and/or searching
for contacts in the blacklist, refer to the operating instructions ofLocal Directoryon page
28.
You can access your corporate directory through your phone. You can add local
contacts, search for a contact, or simply dial a contact number from the corporatedirectory.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
50/124
User Guide for the SIP-T19P IP Phone
40
You can configure your new phone to access up to 5 corporate directories. The phone
supports up to 2000 corporate directory entries. For the access URL of the corporate
directory, contact your system administrator.
To configure an access URL for remote phone book via web user interface:1. Click on Directory->Remote Phone Book.2. Enter the access URL in the Remote URL field.3. Enter the name in theDisplay Namefield.
4. Click Confirmto accept the change.
Note
To access your corporate directory via phone user interface:1. Press Menu->Dir->RemotePhone Book.
If Remote Phone Book is added to the directory, press Dir->Remote Phone Booktoenter remote phone book.
2. Press or to select the desired remote group, and then press the Entersoftkey.
The phone connects to load the corporate directory, and then the corporate contact
list appears on the LCD screen.
3. Press the Backsoft key to back to the previous interface.
An access URL for remote phone book is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
51/124
Customizing Your Phone
41
To search for a contact in the corporate directory:1. Press Menu->Dir->RemotePhone Book.
If Remote Phone Book is added to the directory, press Dir->Remote Phone Booktoenter remote phone book.
2. Select the desired remote group, and then press the Entersoft key to load thecorporate directory.
3. Press the Searchsoft key.4. Enter a few continuous characters of the contact name or number using the keypad.
The contacts whose name or number matches the characters entered will appear
on the LCD screen. You can dial from the result list.
To place a call from the corporate directory:1. Press Menu->Dir->Remote Phone Book.
If Remote Phone Book is added to the directory, press Dir->Remote Phone Booktoenter remote phone book.
2. Press or toselect the desired remote group, and then press the Entersoftkey to load the corporate directory.
3. Select the desired contact in the corporate directory.4. Press the DIAL soft key.In addition, you can enable the phone to present the caller identity stored in the
corporate directory when receiving a call.
To enable the presentation of caller identity stored in remote phone book via web userinterface:1. Click on Directory->Remote Phone Book.2. Select Enabledfrom the pull-down list of Search Remote Phonebook Name.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
52/124
User Guide for the SIP-T19P IP Phone
42
3. Enter the refresh period of corporate directory in the Search Flash Time (Seconds)field.
The default value is 21600 seconds.
4. Click Confirmto accept the change.
The SIP-T19P IP phone maintains call history lists of Placed Calls, Received Calls, Missed
Calls and Forwarded Calls. Call history lists support 100 entries in all. You can view the
call history, place a call, add a contact or delete an entry from the call history list. You
should enable history record in advance.
To enable history record via phone user interface:1. Press Menu->Features->History Setting.2. Press or , or the Switchsoft key to select Enablefrom the History Record
field.
3. Press the Savesoft key to accept the change or the Backsoft key to cancel.To view the call history:1. Press the Historysoft key.
The LCD screen displays All Callslist.2. Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Callsand Forwarded.3. Press or to select the desired entry.4. Press the Optionsoft key, and then select Detailfrom the prompt list.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
53/124
Customizing Your Phone
43
The detailed information of the entry appears on the LCD screen.
To place a call from the call history list:1. Press the Historysoft key.2. Press or to switch between All Calls,Placed Calls, Received Calls, MissedCallsand Forwarded.3. Press or to scroll to the desired entry.4. Press the Sendsoft key.To add a contact to the local directory or blacklist from the call history list:1. Press the Historysoft key.2. Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Callsand Forwarded.3. Press or to scroll to the desired entry.4. Press the Optionsoft key, and then select Add to Contacts(or Add To Blacklist) from
the prompt list.
5. Enter the desired values in the corresponding fields, and then press the Savesoftkey.
For more information, refer toContact Managementon page27.
To delete an entry from the call history list:1. Press the History soft key.2. Press or to switch between All Calls, Placed Calls, Received Calls, Missed
Callsand Forwarded.3. Press or to scroll to the desired entry.4. Press the Deletesoft key.To delete all entries from the call history list:1. Press the History soft key.2. Press or to switch between All Calls,Placed Calls, Received Calls, Missed
Callsand Forwarded.3. Press the Option soft key, and then select Del All from the prompt list.4. Press the Oksoft key.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
54/124
User Guide for the SIP-T19P IP Phone
44
The LCD screen prompts "Delete all records?".
5. Press the Oksoft key to confirm the deletion or the Cancelsoft key to cancel.
You can upload your custom logo which will be shown on the idle screen.
To upload a custom logo via web user interface:1. Click onFeatures->General Information.2. Select Custom Logofrom the pull-down list of Use Logo.
3. Click Browseto locate the logo file from your local system.4. Click Uploadto upload the file.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
55/124
Customizing Your Phone
45
5. Click Confirmto accept the change.
Note
Physically connect your headset and activate the headset mode for use. For more
information on physically connecting a headset, refer toPhone Installationon page11.
To activate the headset mode:1. Press on the phone.
The headset icon on the idle screen indicates that the headset mode is activated.
Press the Answersoft key to answer a call. The call will connect to your headsetautomatically. Enter the desired number and press the Sendsoft key, then thephone will place a call using the headset automatically. For more information on
using the headset to place a call, refer toPlacing Calls on page59.
To deactivate the headset mode:1. Press again on the phone.
The headset icon disappears from the idle screen indicates the headset mode is
deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:1. Click on Features->General Information.
The logo file format must be *.dob, contact your system administrator for moreinformation.
Logo customization is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
56/124
User Guide for the SIP-T19P IP Phone
46
2. Select Enabledfrom the pull-down list of Headset Prior.
3. Click Confirmto accept the change.To use headset prior feature, you should activate the headset mode in advance:1. Physically connect the headset.2. Press to activate the headset mode.
Note
You can customize the soft keys, navigation keys and function keys on the keypad. The
SIP-T19P IP phone supports 11 programmable keys.
To customize the programmable keys via web user interface:1. Click on DSSKey->Programmable Key.
If headset prior is enabled, the headset mode will not be deactivated until you press theHeadset key again.Headset prioris configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
57/124
Customizing Your Phone
47
2. Customize specific features for these keys.
3. (Optional.) Enter a string that will appear on the LCD screen in the Labelfield.Label is configurable only when customizing four soft keys.
4. Click Confirmto accept the change.You can click Reset to default to reset custom settings to defaults.
Note
Common usedprogrammablekey features are explained in the following subchapters in
detail:
Speed Dial
Directed Pickup
Group Pickup
Prefix
Local Directory
Local Group
XML Directory
XML Group
XML Brower
SMS
New SMS
Zero Touch
Keypad Lock
For more information, contact your system administrator.
Programmable keys are configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
58/124
User Guide for the SIP-T19P IP Phone
48
Speed DialYou can use this key feature to speed up dialing numbers often used or hard to
remember.
Dependencies: Type(Speed Dial)Value (the number you want to dial out)
Usage: Press the programmablekey to dial out the number specified in the Value field.Directed PickupYou can use this key feature to answer someone elses incoming callon the phone.Dependencies: Type(Directed Pickup)
Value (the directed pickup code followed by the specific phonenumber)
Usage: Press the programmable key on your phone when the specific phone numberreceives an incoming call. The call is answered on your phone.Group PickupYou can use this key feature to answer incoming calls in a group that is associated with
their own group.Dependencies: Type(Group Pickup)
Value (the group pickup feature code)Usage: Press the programmable key on your phone when a phone number in the groupreceives an incoming call. The call is answered on your phone.PrefixYou can use this key feature to add a specified prefix number before the dialed number.
Dependencies: Type(Prefix)Value (the prefix number)
Usage: Press the programmable key when the phone is idle, then the phone will enterinto the dialing screen and display the prefix number which you specified in the Valuefield. You can enter other digits and then dial out.
Local DirectoryYou can use this key feature to access the local directory quickly. For more information,
refer toLocal Directory on page28.
Dependencies: Type(Local Directory)Usage:Press the programmable key to access the local directory quickly.Local GroupYou can use this key feature to access the group in the local directory quickly. For more
information, refer toLocal Directory on page28.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
59/124
Customizing Your Phone
49
Dependencies: Type(Local Group)Line (the group you want to access)
Usage:Press the programmable key to access the group specified in the Line field.XML DirectoryYou can use this key feature to access the corporate directory quickly. For more
information, refer toRemote PhoneBookon page39.Dependencies: Type(XML Directory)Usage:Press the programmable key to access the corporate directory quickly.XML GroupYou can use this key feature to access the remote group in the corporate directory
quickly. You should configure remote phone book in advance. For more information,
refer toRemote PhoneBookon page39.Dependencies: Type(XML Group)
Line (the remote group you want to access if the remote phone book isconfigured)
Usage:Press the programmable key to access the remote group specified in the Linefield.
XML BrowserYou can use this key feature to access the XML browser quickly. The XML browser allows
you to create custom services which meet your functional requirements on the server.You can customize practical applications, such as weather report, stock information,
Google search, etc.Dependencies: Type(XML rowser)
Value (the access URL for xml browser)Usage:Press the programmable key to access the XML browser specified in the Valuefield.SMSYou can use this key feature to quick access short message service. For more
information, refer toShort Message Service (SMS)on page91.
Dependencies: Type(SM S)Usage: Press the programmable key when the phone is idle to access the shortmessage service.
New SMSYou can use this key feature to quick access the new short message service. For more
information, refer toShort Message Service (SMS)on page91.
Dependencies: Type(New SMS)Usage: Press the programmable key when the phone is idle to access the New
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
60/124
User Guide for the SIP-T19P IP Phone
50
Message screen. You can enter the text message and then send it.Zero TouchYou can use this key feature to configure auto provision and network parameters quickly.
Dependencies: Type(Zero Touch)Usage:1. Press the programmable key to access the zero touch screen.2. Press the Oksoft key in a few seconds.3. Configure the network parameters in the corresponding fields.4. Press the Nextsoft key.5. Configure the auto provision parameters in the corresponding fields.6. Press the Oksoft key.
The phone will reboot to update configurations.
Keypad LockYou can use this key feature to immediately lock the keypad of your phone instead of
long pressing . For more information, refer toKeypad Lockon page22.
Dependencies: Type(Keypad Lock)Usage: Press the programmable key to immediately lock the keypad of your phoneinstead of long pressing .
You can register one account on the SIP-T19P IP phone.
To register an account via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Account.2. Press the Entersoft key.3. Select Enablefrom the Activationfield.
4. Enter the desired values in the Label, Display Name, Register Name, User Name,Passwordand Sip Server1/2fields respectively. Contact your system administratorfor more information.
5. Press the Savesoft key to accept the change or the Backsoft key to cancel.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
61/124
Customizing Your Phone
51
To disable an account via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Account.2. Press the Entersoft key.3. Select Disablefrom the Activationfield to disable the account.4. Press the Savesoft key to accept the change or the Backsoft key to cancel.Account registration is configurable via web user interface at the path
Account->Register.
Dial plan is a string of characters that governs the way your SIP-T19P IP phone processes
the inputs received from your phone keypad. The SIP-T19P IP phone supports the
following dial plan features:
Replace Rule
Dial-now
Area Code
Block Out
The basic expression syntax you need to know:
.
The dot . can be used as a placeholder or multiple placeholders for any
character. Example:
12.would match 123, 1234, 12345, "12abc", etc.x
An xcan be used as a placeholder for any character. Example:12xwould match 121, 122, 123, "12a", etc.
[]
The square brackets []can be used as a placeholder for a single character
which matches any of a set of characters. Example:
91[5-7]1234would match 9151234, 9161234, 9171234.
()
The parentheses ( ) can be used to group together patterns, for instance, to
logically combine two or more patterns. Example:
91([5-7])1(x)would match 91511, 91618, 91715, etc.
$
The $ should be followed by the sequence number of a parenthesis. The
$ plus the sequence number means the whole character or characters
placed in the parenthesis. The number directs to the right parenthesis when
there are more than one. Example:
A replace rule configuration: Prefix: "9([5-7]) (.)", Replace: "5$2". When you
enter "96123" to dial out on your phone, the number will be replaced as "5123"
and then dialed out. $2 means the characters in the second parenthesis,
that is, 123.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
62/124
User Guide for the SIP-T19P IP Phone
52
You can configure one or more replace rules (up to 100) to remove the specified string
and replace it with another string. You can configure a pattern with wildcards (refer to
the expression syntax in the table above), so that any string that matches the pattern
will be replaced. This feature is convenient for you to dial out a long number. For
example, a replace rule is configured as Prefix: 1and Replace: 1234567. When
trying to dial out the number 1234567, you just need to enter 1on the phone and
then press the Send soft key.
To add a replace rule via web user interface:1. Click onSettings->Dial Plan->Replace Rule.2. Enter the string (e.g., 1) in the Prefixfield.3. Enter the string (e.g., 1234) in the Replacefield.
4. Click Addto add the replace rule.When you enter the number 1using the keypad and then press theSendsoft key,the phone will dial out 1234instead.
To edit a replace rule via web user interface:1. Click on Settings->Dial Plan->Replace Rule.2. Select the desired replace rule by checking the check box.3. Edit the values in the Prefixand Replacefields.4. Click Editto accept the change.To delete one or more replace rules via web user interface:1. Click on Settings->Dial Plan->Replace Rule.2. Select one or more replace rules by checking the check box(es).
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
63/124
Customizing Your Phone
53
3. Click Delto delete the replace rule(s).
Note
You can configure one or more dial-now rules (up to 100) on your phone. When the
dialed out number matches the dial-now string, the number will be dialed out
automatically. For example, a dial-now rule is configured as 2xx, then any entered
three-digit string beginning with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:1. Click on Settings->Dial Plan->Dial-now.2. Enter the desired value (e.g., 1234) in the Rulefield.
3. Click Addto add the dial-now rule.When you enter the number 1234using the keypad, the phone will dial out 1234
automatically without pressing any key.
Note
Delay Time for Dial-now RuleYou can configure the delay time for dial-now rules. That is, you can configure your
phone to dial out the phone number automatically, which matches a dial-now rule, after
the specified delay time.
Replace rule is configurable via web user interface only.
Dial-now rule is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
64/124
User Guide for the SIP-T19P IP Phone
54
To configure the delay time for dial-now rule via web user interface:1. Click onFeatures->General Information.2. Enter the time within 1-14 (in seconds) in the Time-Out for Dial-Now Rule field.
3. Click Confirmto accept the change.
Note
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing the number
outside the code area. For example, area code is configured as Code: 0592, Min
Length: 4,Max Length: 11, then when you dial out the number 56789, which has thedigits between 4 to 11, the phone will add the area code and dial out the number
059256789. You can only configure one area code rule on your phone.
To configure the area code via web user interface:1. Click on Settings->Dial Plan->Area Code.
Delay time for dial-now rule is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
65/124
Customizing Your Phone
55
2. Enter the desired values in the Code, Min Length (1-15)and Max Length (1-15)fields.
3. Click Confirmto accept the change.
Note
You can block some specific numbers from being dialed on your phone. When you dial
a block out number on your phone, the dialing will fail and the LCD screen will promptForbidden Number. You can add 10 block out rules at most on your phone.
To add a block out number via web user interface:1. Click on Settings->Dial Plan->Block Out.2. Enter the desired value in the BlockOut Numberfield.
Area code is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
66/124
User Guide for the SIP-T19P IP Phone
56
3. Click Confirmto add the block out number.
Note
Public telephone networks in countries around the world have a single emergency
telephone number (emergency services number), that allows a caller to contact local
emergency services for assistance when necessary. The emergency telephone number
may differ from country to country. It is typically a three-digit number so that it can be
easily remembered and dialed quickly. Some countries have different emergency
numbers for different emergency services.
You can specify the emergency telephone number on the IP phone for contacting the
emergency services in an emergency situation.
Note
To specify emergency numbers via web user interface:1. Click onFeatures->Phone Lock.2. Enter the emergency number in the Emergencyfield.
For multiple numbers, enter a comma between every two emergency numbers. The
default emergency numbers are 110, 911 and 120.
3. Click Confirmto accept the change.
Note
Contact your local phone service provider for available emergency numbers in yourarea.
Block out number is configurable via web user interface only.
Emergency number is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
67/124
Customizing Your Phone
57
You can enable live dialpad on the SIP-T19P IP phone, which enables the IP phone to
automatically dial out the phone number without pressing the send key. You can also
configure a delay, where the phone will dial out the phone number automatically after
the specified period of time.
To enable live dialpad via web user interface:1. Click on Settings->Preference.2. Select Enabledfrom the pull-down list of Live Dialpad.3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
The default delay time is 4s.
4. Click Confirmto accept the change.
Note
You can dial a hotline number immediately upon lifting the handset or pressing the
Speakerphonekey. You can also configure a delay, where the phone will dial out thehotline number automatically after the specified period of time.
To configure the hotline number via phone user interface:1. Press Menu->Features->Hotline.
Live dialpad is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
68/124
User Guide for the SIP-T19P IP Phone
58
2. Enter the desired number in theNumberfield.
3. Enter the delay time (in seconds) in the Hotline Time-outfield.The valid values range from 0 to 10.
4. Press the Savesoft key to accept the change or the Backsoft key to cancel.Hotline is configurable via web user interface at the pathFeatures->GeneralInformation.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
69/124
Basic Call Features
59
The SIP-T19P IP phone is designed to be easily used like a regular phone on a public
switched telephone network (PSTN). You can place calls, answer calls, transfer a call to
someone else, or conduct a conference call.
This chapter provides basic operating instructions for the SIP-T19P IP phone. Topics
include:
Placing Calls
Answering Calls
Ending Calls
Redialing Numbers
Recent Call In Dialing
Auto Answer
Auto Redial
Call Completion
Call Return
Call Mute
Call Hold/Resume
Do Not Disturb (DND)
Call Forward
Call Transfer
Call Waiting
Conference
Call Pickup
Anonymous Call
Anonymous Call Rejection
If you require additional information or assistance with your new phone, contact your
system administrator.
You can place a call in three ways using your SIP-T19P IP phone:
Using the handset
Using the speakerphone
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
70/124
User Guide for the SIP-T19P IP Phone
60
Using the headset
You can also dial the number first, and then choose the way you want to speak to the
other party.
You can also search and dial a contact from call history, local directory or remote phone
book. For more information, refer toContact Management on page27 andCall History
Managementon page42.
During a call, you can alternate between Speakerphone, Headset and Handset modes
by pressing the Speakerphone key, the Headset key, or picking up the handset.
The call duration of active call is visible on the LCD screen. In the figure below, the call to
Kame has lasted 26 seconds.
To place a call using the handset:1. Pick up the handset.2. Enter the desired number using the keypad.3. Press , , or the Sendsoft key.The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither. For more information, refer toKey as Sendon page21.
Note
To place a call using the hands-free speakerphone mode:Do one of the following:
- With the handset on-hook, press to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Sendsoft key.- With the handset on-hook, enter the desired number using the keypad.
Press , , , or the Sendsoft key.
You can also dial using the SIP URI or IP address. To obtain the IP address of the phone,press the key. The maximum SIP URI or IP address length is 32 characters. For example,SIP URI: [email protected], IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for moreinformation.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
71/124
Basic Call Features
61
To place a call using the headset:1. With the optional headset connected, press to activate the headset mode.2. Enter the desired number using the keypad.3. Press , , or the Sendsoft key.
Note
To place multiple calls:You can have more than one call on your SIP-T19P IP phone. To place a new call during
an active call:
1. Press the Holdsoft key to place the original call on hold.2. Press theNewCall soft key.3. Enter the desired number using the keypad.4. Press , , or the Sendsoft key.You can press or to switch between the calls, and then press theResumesoftkey to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not in Another CallCall duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:1. Pick up the handset.
To permanently enable your headset, refer toHeadset Prioron page45.
You can ignore incoming calls by pressing the Rejectsoft key or theSilencesoft key. Youcan also activate Do Not Disturb mode to ignore all incoming calls without ring on yourphone. For more information, refer toDo Not Disturb (DND) on page69.
You can forward incoming calls to someone else by pressing the Fwdsoft key. For moreinformation, refer toCall Forwardon page70.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
72/124
User Guide for the SIP-T19P IP Phone
62
To answer a call using the hands-free speakerphone mode:Do one of the following:
- Press .
-With the handset on-hook and headset mode deactivated, press the Answersoftkey.
To answer a call using the headset:Do one of the following:- Press .
- With the headset mode activated, press the Answer soft key.Answering When in Another CallIf you have an active call, and an incoming call arrives on the phone, do one of the
following:
- Press the Answersoft key.The incoming call is answered and the original call is placed on hold.
- Press to access the new call.
Press or the Answersoft key.The incoming call is answered and the original call is placed on hold.
Note
To end a call:Do one of the following:
- If you are using the handset, press the Cancel soft key or hang up the handset.- If you are using the headset, press the Cancel soft key.- If you are using the speakerphone, press or the Cancelsoft key.
Note To end a call placed on hold, you can press the Cancelsoft key to end the call directly, orpress the Resumesoft key to resume the call before ending it.
The phone will not receive a new incoming call when there are two calls on the phone.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
73/124
Basic Call Features
63
To redial the last dialed number from your phone:1. Press twice.
A call to your last dialed number is attempted.
To redial a previously dialed number from your phone:1. Press when the phone is idle.2. Press or to select the desired entry, and then press or theSendsoft
key.
You can view the placed calls list when the phone is in the pre-dialing screen. To do this,
you should enable recent call in dialing in advance.
To enable recent call in dialing via web user interface:1. Click on Directory->Setting.2. SelectEnabledfrom the pull-down list of Recent Call In Dialing.
3. Click Confirm to accept the change.
Note Recent call in dialing is configurable via web user interface only.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
74/124
User Guide for the SIP-T19P IP Phone
64
To view placed calls list when the phone is in the pre-dialing screen:1. Pick up the handset or press the speakerphone.
The LCD screen displays the placed calls list. You can press or to select
the desired entry and then place a call to the contact.
You can use auto answer to automatically answer an incoming call.
To configure auto answer via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin)->Account.2. Press the Entersoft key.3. Press or , or the Switchsoft key to select Enable from the Auto Answer
field.
4. Press the Savesoft key to accept the change or the Backsoft key to cancel.The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note Auto answer is only applicable when there is no other call in progress on the phone.
-
8/12/2019 Yealink SIP-T19P User Guide V71 30
75/124
Basic Call Features
65
You can enable auto redial to redial the phone number automatically when the called
party is busy. You can also configure the times settings for auto redial and the time to
wait between redial attempts.
To configure auto redial via phone user interface:1. Press Menu->Features->Auto Redial.2. Press or , or the Switchsoft key to select Enable from the Auto Redialfield.
3. Enter the desired time in the Intervalfield.The default time interval is 10s.
4.