R.Winter 2009

Recap how to label a drawing to BSi standards and the symbols for Orthographic style (H/L due in)

Know what CAD stands for and what it is.

Begin building the spinner design in 3D using a CAD software package – Autodesk Inventor.

Have built the ‘hexagon’ part of the spinner project to the correct scale following the tutorial.

What is an Orthographic What is an Orthographic Drawing?Drawing?

Label a linear dimension, a diameter, Label a linear dimension, a diameter, an angle and a small dimension to BSi an angle and a small dimension to BSi standards on the below drawing.standards on the below drawing.

Task 1:Task 1: - Go to the student drive \ - Go to the student drive \ Tech \ Mr Winter \ Year 10 Engineering \ Tech \ Mr Winter \ Year 10 Engineering \ Lesson 2. Lesson 2.

Plug in a set of head phones and work Plug in a set of head phones and work through the video instruction on ‘how through the video instruction on ‘how to make the hexagon’to make the hexagon’

Your aim is to have finished the Your aim is to have finished the hexagon part by the end of today’s hexagon part by the end of today’s lessonlesson