This webinar is being held to test your hardware. If you can see this screen and hear my voice, you are good to go!
Spring 2015
Spring 2015http://goo.gl/forms/J7YidUh0ys
Spring 2015
Welcome
www.sketchup.com
Lesson 1
www.sketchup.com
Lesson 1
Select Educational Use
www.sketchup.com
Lesson 1Fill in the information boxes.
Select your computer
Select the type download and check the boxes.
Select student
Lesson 1
Basics
SELECTION TOOL
DRAWING LINES
DRAWING SIMPLE FIGURES
PULLING/PUSHING
PANNING AND ORBITING
ROTATING AND MOVING
ZOOMING
Lesson 1
Lesson 1
Lesson 1
Lesson 1
Opening Screen
Instructor
Lesson 1
Instructor
Lesson 1
Large Tool Set
Lesson 1
Large Tool Set
Lesson 1
Selector Tool
Lesson 1
Line Tool
Lesson 1
Click once to start line - do not click and drag!
Lesson 1
Can align to axis
Lesson 1
Click again to finish line
Lesson 1
Now you try it!
Lesson 1
Build a square
** Tip: press esc to cancel a line mid-build
Lesson 1
Grey signifies solid shape
Lesson 1
Push/pull tool
Lesson 1
Hover over a face and click once to select
Lesson 1
Click again to finish
Lesson 1
Orbitting, Pan, Zoom
** Press o to orbit
Lesson 1
Rectangle tool
Lesson 1
Circle tool
Lesson 1
Selection tool
• Click once to select a line or face• Click twice to select a 2D object • Click three times to select whole object
Lesson 1
Click once
Lesson 1
Double click
Lesson 1
Triple click
Lesson 1
Moving • **Always move on an axis to avoid “floating” objects
Moving • **Always move on an axis to avoid “floating” objects
Rotate
• With selector tool, triple click to select whole object
• With rotate tool selected, double click face center
ROTATING AROUND CENTER
Lesson 1
Rotate
• Double click face center
ROTATING AROUND CENTER
Lesson 1
Rotate
• Orient, hold shift, click
ROTATING AROUND POINT
Lesson 1
Lines and shapes
Inferring
Lesson 1
Lines and shapesShape by size
Lesson 1
Click once to start shape, move mouse to “get shape started”, then simply start typing. Once you hit enter shape should finish on its own.Tip: Don’t click on the dimensions box. Just start typing.
Lines and shapes
Sides
Lesson 1
Circles and polygons the number of sides can be changed. Then you enter the radius.
Lines and shapes
Sides
Lesson 1
Circles and polygons the number of sides can be changed. Then you enter the radius.
Try it!
Arcs
• Click for start point, click for end point, move mouse to bend
• Measured: Click to start, enter length of line, enter ‘radius’ for curve
Lesson 1
Arc Tangents
• Create tangents to soften edges
Lesson 1
TextANCHORED COMMENTS
Lesson 1
Text3D TEXT OBJECTS
Lesson 1
Text
• Comments ‘swivel’ with camera, 3D text objects act like any other element and do not ‘swivel with camera
Lesson 1
Orientation
• Hold shift key to set orientation
Lesson 1
Follow Me Tool3 STEPS TO USING THE FOLLOW ME TOOLStep 1
Lesson 1
Follow Me Tool3 STEPS TO USING THE FOLLOW ME TOOLStep 2
Lesson 1
Follow Me Tool3 STEPS TO USING THE FOLLOW ME TOOLStep 3