Human Foosball!

There are many variations to play this game. Definitely google “Human Foosball”! Shout out to https://kidfriendlythingstodo.com/diy-human-foosball-game-family-fun/ for this one below!Supplies

7 total – (4 for the bars) + (3 more for legs) 1 inch PVC pipe in 10 ft. sections

(8) PVC elbows – I used a reducer and made the legs 1/2 inch wide (shown in the image below), but in hindsight, that wasn’t necessary. I would just go with 1 inch elbows for your 1 inch pipe

(8) Small to medium buckets for your base

Quikrete – cement mix

A saw to cut the pipes that you will use as your legs

Optional – PVC glue

Duct Tape

How To:You’ll leave 4 of the 10 ft. PVC pipes aloneWith the other 3 10 ft. PVC pipes, cut (8) 38 inch pieces You can attach your elbows to these smaller 38 inch pieces at anytime

*You can use glue to glue the elbows onto the small legs if you want. If you intend on gluing it, my advice would be to only glue the elbows to the leg pieces or to the ends of the 10 ft. pipe – not to both!Mix the Quikrete up and pour it into your bucketsSet the leg pieces into the Quikrete, pack it nice and tight around the poleslet the cement dry until firmWhen you are ready to play just assemble it like the picture above (Set 2 buckets 10 ft. apart and place a 10 ft. PVC pipe into the elbows of the legs) Do this for all 4 sectionsThe PVC pipe should fit right into the elbowsThe game is really easy to take apart, transport and put together*If you felt the need, like I did to be able to disassemble the Human Foosball Court when you’re done, then when play gets rough the pieces might pop out of the elbows. Just use a little Duct Tape to secure them during the game and when you’re done, cut the tape away. Problem Solved!