B

YOUDREA DEROAT

B. Sc. Industrial and Production Engineering, 2002, Shahjalal University of Science and Technology, Sylhet, Bangladesh. sust.edu

PROFESSIONAL QUALIFICATION:

Senior Welding Inspector Level 3(CSWIP 3.2.2, Radiographic Interpreter- Ferritic Steels, Austenitic Steels & High Nickel Alloys), Certificate No: 68029 , Date of Expiry: 12 August 2017

Quality Management System Lead Auditor, ISO 9001:2008, Certificate No: LA2/10/IN/33829, Bureau Veritas Certification.

Welding Inspector (CSWIP 3.1), Certificate No: 45899, Date of Expiry: 24 February 2015

Painting Inspector BGAS-CSWIP Grade 2, ID No: 577274, Certificate N0: 29020, Date of Issue: 16 July 2007, Date of Expiry: 5 July 2017

ASNT Level 2 RT, PT, MT, UT, FCE, Mumbai, India

PROFESSIONAL EXPERIENCE:

July 2011 to PresentQA QC EngineerHiap Seng Engineering, Tuas, Singapore Develop Quality Plan / Inspection and Test Plan tailor made to Project with In the format of corporate QMS Initiate work instructions as necessary for the enhancement of quality Implement the established and approved Project specification and standards Schedule and Arrange periodic audits and reporting Prepare WPS, PQR, Witness PQR, WQT/WPQ and offer to third party inspector (Section IX, ASME B31.3). Inspection of received material, fit-up, visual inspection of weld, Request and witness NDT activities, Review RT Films. Preparation of Inspection Reports, As built, test package and MDR conforming QMS In case of nonconformity prepares NCR and resolve the issues related to it. Witness Hydrostatic Test, PWHT, PMI, Ferrite test, Vacuum test, tensile test, bend test etc. Inspection of Surface preparation, coating & insulation activities Singapore experience with shop (Lanxsess Butyl Rubber Project) and site activities ( Singapore LNG Terminal Project, Welding of SS 304L for Cryogenic application)

February 2011 to June 2011QC Engineer & Senior Welding InspectorPipeliners Ltd. Dhaka, Bangladesh(A Chevron EPC contractor)Job Responsibilities:s Develop Quality Plan / Inspection and Test Plan tailor made to Project with In the format of corporate QMS Assess the WPS (ASME Section IX, ASME B31.3, D 1.1) required to cover welding works for the Muchai Gas Compressor project. Schedule and Arrange periodic audits and reporting Prepare WPS, PQR, Witness PQR, WQT/WPQ and offer to Chevron MIQA (Section IX, ASME B31.3). Inspection of received material, fit-up, visual inspection of weld Review RT films and witness NDT activities and offer to Client representative. Inspection of Surface preparation and coating & Insulation activities Arrange and witness Hydrostatic Test, PWHT, PMI, Ferrite test, Vacuum test, tensile test, bend test etc. Preparation of weld map for piping and tank for gas compression station, inspection reports, test packages etc. Communicate with Chevron MIQA to witness the inspection activities.

June 2010 to January 2011Engineer, Welding & CNC Machining Karnafuly ShipyardIchanagar, Chittagong, BangladeshJob Responsibilities: Prepare WPS (ASME Section IX and AWS D1.1), Arrange Procedure qualification Record (PQR), Welder Qualification test (WQT) and request Class Surveyor to witness. Review drawing, supervision and inspection of welding at new construction of cutter suction dredger and ro ro ferry. Prepare NDT Plan and arrange and offer Inspection and Testing to Class Surveyor. Preparation of inspection documentation procedures and method statements. Prepare CAD Drawing, G code (CAM) and arrange cutting of ms plate, HP etc as per requirement of construction in the CNC Plasma cutting machine. Witness Hydrostatic Test, PWHT, PMI, Ferrite test, Vacuum test, tensile test, bend test etc. Monitor and arrange maintenance for CNC Plasma cutting machine. Paint system selection, estimate paint requirement and inspection of paint application. Manage documentation as per Quality Manual and ISO 9001:2008 requirements, Schedule and Arrange periodic audits and reporting

July 2009 to June 2010QA QC EngineerInspec, Abu Dhabi, U.A.E. Job Responsibilities: Worked with Offshore production platform fabrication (Talisman Energy), Barge fabrication (Saipem) at Adyard, Liwa 2, District cooling chilled water pipeline (Nazmat Al Reem Island) as a Contractor Inspector and Third Party Inspector. Review project documentation, Welding Procedure Specification, Procedure Qualification Record, Welder Approval record, Standards (ASME Section IX, ASME B31.3, AWS D1.1) etc., Witness FAT, Material inspection on receiving, welder qualification test, visual inspection of weld, mechanical test, NDT, Hydro test, PWHT, PMI, Ferrite test and evaluation of report. etc Inspection of painting & insulation activities. Worked with Protective (mastic epoxy, zinc rich epoxy, amide cured epoxy etc.), Pickling & Passivation, Fire Proofing (Intumescent), Anti-Skid paint systems.

May 2007 to December 2008Mechanical Engineer and QA QC Inspector(Saudi Aramco Coating Approval SAP#70009630)FMQ Sons Co. (Saudi Aramco EPC contractor), Khobar, Saudi ArabiaJob Responsibilities: Worked with Oil & Gas Pipeline, Equipment, Structural & Spool fabrication Review QA QC Plan, Project documentation, Applicable Standards (SAES, API 1104, ASME Section IX, ASME B31.3, AWS D1.1), ITP (SATIP), Drawings etc. Review of WPS and carry out the welders & welding operator's qualification test (WPQT). Inspection of Engineering Materials (Pipes, plates, Elbows, Bends, Flanges, Tees, Valves, Paint etc.) on receiving and verification of material certificates as per applicable code. To inspect weld preparation and visual inspection after welding as per ITP. Planning and Witnessing of NDT, Mechanical Testing, Hydro Testing, PWHT etc. and evaluation of report Inspection of surface, surface preparation painting & insulation activities as per applicable code & ITP. Worked with Protective (mastic epoxy, FBE, zinc rich epoxy, amine cured high build epoxy, bituminous etc.), Anti-Skid paint systems.

Preparing course material, handout and presentation and conduct training.

February, 2003 to April, 2007Assistant Engineer Techno Tech engineering (EPC Contractor) Chittagong, Bangladesh Managing work force and schedule works to meet the deadline of Fabrication and Site erection activates. Deliver the fabrication production (Cutting, Welding, Painting & insulation) conforming to the client Specification/Standard. Preventive Maintenance of the equipment and maintenance on breakdown. Co-ordinate with material dept. & supplier to maintain the material as required at shop. Generate manpower reports. Carry out work conforming Environmental, Occupational & Health and Safety standards. SEMINAR AND TRAININGS:CSWIP 3.2.2 Senior Welding Inspection, August 12-27, 2012,Virtual Engineering, TWI SEA, Singapore.

Quality Management System Lead Auditor, ISO 9001:2008, 30 October to 3 November, 2010Bureau Veritas Certification, Dhaka, Bangladesh.

Implementation Workshop on ILO-Maritime Labor Convention, 24th & 25th July 2010, Germanischer Lloyd Academy, Chittagong, Bangladesh.

CSWIP 3.1 Welding Inspection, February 19-23, 2010,TWI Middle East, Abu Dhabi, U.A.E.

BGAS-CSWIP Painting Inspection, Grade 2, July 1 to 5, 2007, Certificate No: 12UH/577274, TWI Gulf, Manama, Bahrain.

Industrial Technology on Mechanical Engineering, 21st August to 19th September, 2005, Training Institute for Chemical Industries, Polash, Norshingdi, Bangladesh.

Industrial Attachment Training, 15 days, June 2004, Bangladesh Industrial Technical Assistance Center, Dhaka, Bangladesh.

Safety Orientation, December 1, 2007, Juaymah Gas Plant, Saudi Aramco.

Emergency Procedure, P.P.E. and Fire Extinguisher, July 17, 2007Basic ISO 9000, July 18, 2007, Technical Training Department, FMQ Sons Co. Abqaiq, Saudi Arabia.

SKILLS: ASME Section IX, VIII and V, Welding & Painting Inspection, Procedure Preparation, Fabrication ActivitiesStrong analytical ability, Supervision, Managing Internal and External Customer of an Organization, HVAC, Computer Aided/Manual Design and Drafting, Operation and Maintenance of Industrial Mechanical Equipment, Ms Office/Desktop Applications, Assembling PC, Windows install and troubleshooting, Light vehicle Driving

LANGUAGES:English (Advance), Bengali (Native), Hindi/Urdu (Verbal).

MEMBERSHIP

Singapore Welding Society (F2427)

PERSONAL DETAILS:Fathers Name:Bashir AhmodSpouse:Tuntun FatemaNationality: Bangladeshi. Date of birth: 1st February, 1982.

REFERENCE:Engr. Nazmul HudaEx Executive Director,Karnafuly ShipbuildersChittagong, Bangladesh Contact: +88 0173 189 6792 email: mnh7154@yahoo.comAbdul Wahab ChowdhuryEngineer, ESDAmerican Bureau of Shipping, Singapore Contact: +65 9109 6397 email: wahab_babu@yahoo.com

RESUME, B. M. KHALID AHMOD SHEBLI

Page 1 of 3 April 6, 2015 RESUME, B. M. KHALID AHMOD SHEBLI

Page 2 of 3April 6, 2015