your first choice in permanent formwork · 2020. 11. 10. · the propping distances for q-lock vary...
TRANSCRIPT
YOUR FIRST CHOICE IN PERMANENT FORMWORK
®
®
70mm
215mm
YOUR FIRST CHOICE IN PERMANENT FORMWORK
Product Information
The product is manufactured from ISQ 230 grade Z 200 Galvanized steel.
Features
Product Range
Product Material Specification
Profile Sketches
Permanent formwork is the perfect product to save you timeand money when casting suspended concrete floors.
Support the weight of the wet concrete and construction load.
No need for additional re-enforcing steel when used in accordance withthe load tables. Only a Ref 193 mesh is required to prevent cracking.
Time saving on erection.
Easily installed by Semi-Skilled labour.
Ideally suited for use on Steel, Brick & Concrete structure.
Easy to transport, handle and install.
The product range consist of three profiles and is available in four thicknesses ofmaterial, see tables for details.
50mm
260mm
1
90mm
175mm
Loading Tables
50mm
260mm
Q-Lock Permanent Formwork
YOUR FIRST CHOICE IN PERMANENT FORMWORK
2
Loading Tables
50mm
260mm
YOUR FIRST CHOICE IN PERMANENT FORMWORK
3
Loading Tables
70mm
215mm
YOUR FIRST CHOICE IN PERMANENT FORMWORK
4
Loading Tables
70mm
215mm
YOUR FIRST CHOICE IN PERMANENT FORMWORK
5
Loading Tables
90mm
175mm
YOUR FIRST CHOICE IN PERMANENT FORMWORK
6
YOUR FIRST CHOICE IN PERMANENT FORMWORK
7
Loading Tables
90mm
175mm
YOUR FIRST CHOICE IN PERMANENT FORMWORK
8
Fastening
Design Information
The Q-Lock units are designed to interlock and requires no furtherfastening between panels.
When placed on a steel structure, the panels are secured to thestructure on every beam in every Q-Lock pan, by means of suitableself-drilling screw, Hilti nails or similar.
A 50mm end bearing is required for steel structures.
When placed on brick or concrete structure, the top face is tobe level and free of any debris.
The panels are placed on the brickwork or concrete beams and isnot secured to the structure itself.
A 75mm end bearing is required.
Q-Lock panels can be used in conjunction with additionalreinforcement to increase the moment of resistance.
Design methods for slabs where Q-Lock is used is the sameas for conventional slabs with the Q-Lock panels providing thetensile reinforcement.
The propping distances for Q-Lock vary from 1,8m to 2.5mdepending on the profile and material thickness.For longer propping centers, please contact us.
The calculations are based on the Limited State Method (SANS 10100-1: 2000)
“SA designs No. A2016/00936 and F2016/00937”
Product ready for despatch.
YOUR FIRST CHOICE IN PERMANENT FORMWORK
9
YOUR FIRST CHOICE IN PERMANENT FORMWORK
10
Project Meze Cheese Factory
YOUR DISTRIBUTOR