your waterblast solutions provider€¦ · "your waterblast solutions provider" over the...

"Your Waterblast Solutions Provider"

Over the last several decades, Jetstream of Houston,LLP, a division of Federal Signal, has provided industrial high-pressure waterblast equipment, parts and accessories to companies worldwide. In additionto manufacturing the highest quality waterblast equipment and parts, Jetstream's Industrial SalesTechnicians have provided timely and cost efficientwaterblast solutions to thousands of customers acrossthe globe.

Here are just a few reasons why Jetstream is theprovider of choice in the high-pressure waterblast industry:

.Waterblast Equipment up to 40,000 psi.Over 10,000 high quality parts and accessories.Same day shipments.24/7 Tech Support.State-of-the-art Website (www.waterblast.com).Over 20 Sales Technicians worldwide."Right Start Program" (Initial start-up training on allnew equipment).Fully Staffed Engineering and R&D Department .UNx Fluid End—up to 40,000 psi (Conversions forall popular models including NLB, Butterworth andWOMA pumps)

Call us today or visit our website atwww.waterblast.com.

Jetstream of Houston4930 CranswickHouston, TX 77041Phone: (713) 462-7000Fax: (713) 462-5387Toll Free: (800) 231-8192

Office Hours: Monday-Friday7:00 am to 6:00 pm (CST)

I

INTRODUCTIONTube & Pipe Cleaning Systems . . . . . . . . . . . . . . . . . IV

Surface Cleaning System . . . . . . . . . . . . . . . . . . . . . . V

A UNITSDiesel Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Electric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Right Start Program . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Custom Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

B PUMPS & FLUID ENDSThe UNx™ Advantage . . . . . . . . . . . . . . . . . . . . . . . . B-1

UNx™ Fluid Ends: Available Models . . . . . . . . . . . . . B-2

UNx™ Bareshaft Pump: Model 5020Q . . . . . . . . . . . B-3

UNx™ Bareshaft Pump: Model 4220 . . . . . . . . . . . . B-5



UNx™ Fluid End: Model 5020Q . . . . . . . . . . . . . . . . B-14

UNx™ Fluid End: Models 4220 & 3620 . . . . . . . . . . B-16

UNx™ Fluid End: Model 3020 . . . . . . . . . . . . . . . . . . B-18

UNx™ Fluid End: Butterworth L-450

Gardner Denver TF-450 . . . . . . . B-20

UNx™ Fluid End: Butterworth L-375

Gardner Denver TF-375 . . . . . . . B-22

UNx™ Fluid End: NLB Triplex Pumps . . . . . . . . . . . B-24

UNx™ Fluid End: NLB Quintuplex Pumps . . . . . . . . B-26

UNx™ Fluid End: Woma 150 Series Pumps . . . . . . B-28

C GUNS, VALVES, & FILTERSDuraSafe™ Hand Guns: Dump Style . . . . . . . . . . . . C-1

DuraSafe™ Hand Guns: Shut-In Style . . . . . . . . . . . C-3

DuraSafe™ Hand Guns: Electric Dump Style . . . . . C-5

DuraSafe™ Foot Guns: Dump Style . . . . . . . . . . . . . C-7

DuraSafe™ Foot Guns: Shut-In Style . . . . . . . . . . . . C-8

Air-Operated Diverter Valve . . . . . . . . . . . . . . . . . . . . C-9

Multi-Gun Valve (MGV) . . . . . . . . . . . . . . . . . . . . . . . C-10

Bypass Valve: Hand Adjustable . . . . . . . . . . . . . . . . . C-11

Shut-In Regulator Valve: Hand Adjustable . . . . . . . . C-12

Nozzle Shut-Off Valve (NSOV) . . . . . . . . . . . . . . . . . C-13

Hydro-Throttle: Hydraulic Throttle Control . . . . . . . . . C-14

High Pressure In-Line Filter . . . . . . . . . . . . . . . . . . . . C-15

Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-16

D HOSES & LANCESRubber Waterblast Hoses . . . . . . . . . . . . . . . . . . . . . D-1

Thermoplastic Hoses . . . . . . . . . . . . . . . . . . . . . . . . . D-2

Flex Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3

Custom Order Hoses & Flex Lances: . . . . . . . . . . . . D-4

End Fittings & Cover Options . . . . . . . . . . . . . . . . . . D-5

Hoses & Flex Lances: Pressure Drop Data . . . . . . . D-6

Rigid Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8

Rigid Lance Pressure Drop . . . . . . . . . . . . . . . . . . . . D-9

E NOZZLESOrbi-Jet QCX Surface Cleaning Nozzle . . . . . . . . . . E-1

Orbi-Jet QCX: OX Carbide Nozzles . . . . . . . . . . . . . E-2

Orbi-Jet QCX: UHPX Sapphire Nozzles . . . . . . . . . . E-3

Orbi-Jet Surface Cleaning Nozzle . . . . . . . . . . . . . . . E-4

Orbi-Jet: OR Carbide Nozzles . . . . . . . . . . . . . . . . . . E-5

Orbi-Jet: ORS Sapphire Nozzles . . . . . . . . . . . . . . . . E-5

Rotomag 2-D Pipe Cleaning Nozzle . . . . . . . . . . . . . E-7

Rotomag Accessories . . . . . . . . . . . . . . . . . . . . . . . . . E-8

Rotomag: RM Carbide Nozzles . . . . . . . . . . . . . . . . . E-9

Rotomag: RMS Sapphire Nozzles . . . . . . . . . . . . . . E-10

Pipe Cleaning Nozzles . . . . . . . . . . . . . . . . . . . . . . . . E-11

Pipe Cleaning Nozzles: RM Carbide Nozzles . . . . . E-11

Pipe Cleaning Nozzles: RMS Sapphire Nozzles . . . E-11

Tube Spinner Tube Cleaning Nozzles . . . . . . . . . . . . E-12

Dril-Jet Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . E-13

HPF Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . . . E-14

HPE Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . . . E-15

HPM Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . . . E-16

Abrasive Cutting Nozzle . . . . . . . . . . . . . . . . . . . . . . . E-17

F GAUGES & FITTINGSPressure Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-1

Thread Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-1

Male Port Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2

Female Port Adapters . . . . . . . . . . . . . . . . . . . . . . . . . F-4

Multi-Port Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-5

Port Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-5

Female Quick Disconnect Fittings . . . . . . . . . . . . . . . F-6

Male Quick Disconnect Fittings . . . . . . . . . . . . . . . . . F-7

Type "M" Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-8

Medium Pressure Crosses, Tees, & Elbows . . . . . . F-9

IIJetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com

Copyright Jetstream of Houston, LLP ©2004

TABLE OF CONTENTS20,000 PSI

TABLE OF CONTENTS20,000 PSI

Jetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com


III

NLB, Butterworth, Gardner-Denver, Woma, Turtleskin, Blue Goop, Loctite,Cordura, Tritan, Weatherford, Wheatley, and American Aero are trademarksand/or registered trademarks of their respective companies. Jetstream dis-claims any and all rights to these marks.

Jetstream reserves the right to suspend or discontinue the sale of any prod-uct contained herein or perform any modifications to product design withoutprior notification.

F GAUGES & FITTINGS (continued)Medium Pressure Couplings . . . . . . . . . . . . . . . . . . . F-10

Medium Pressure Quick Connect Couplings . . . . . . F-11

Medium Pressure Male Fittings. . . . . . . . . . . . . . . . . F-11

Gland Nuts, Collars, & Plugs. . . . . . . . . . . . . . . . . . . F-12

Anti-Vibration Gland Assemblies . . . . . . . . . . . . . . . . F-12

Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-13

Lance Close Nipples . . . . . . . . . . . . . . . . . . . . . . . . . F-14

Slimline Lance Fittings . . . . . . . . . . . . . . . . . . . . . . . . F-14

Medium Pressure Rigid Lance Holders . . . . . . . . . . F-15

Jetstream Rigid Lance Holders . . . . . . . . . . . . . . . . . F-16

Quick Disconnect Flex Lance Connectors . . . . . . . . F-16

G SAFETYSafety Apparel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1

Safety Supplies & Accessories . . . . . . . . . . . . . . . . . G-2

Rupture Disc Holders. . . . . . . . . . . . . . . . . . . . . . . . . G-3

Severe Service Relief Valve . . . . . . . . . . . . . . . . . . . G-4

DuraSafe™ Safety Shroud . . . . . . . . . . . . . . . . . . . . G-5

Safety Shrouds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5

Strain Relief Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6

Flex Lance Safety Grip . . . . . . . . . . . . . . . . . . . . . . . G-6

Hose Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6

H SURFACE CLEANERSHydro-Mower Surface Cleaners . . . . . . . . . . . . . . . . H-1

I TECHNICALUnit Conversions & Formulas . . . . . . . . . . . . . . . . . . I-1

Connection Types: Jetstream Port . . . . . . . . . . . . . . I-2

Connection Types: Quick Disconnect . . . . . . . . . . . . I-2

Connection Types: Medium Pressure. . . . . . . . . . . . I-3

Connection Types: Medium Pressure Tube . . . . . . . I-4

Connection Types: Jetstream Lance. . . . . . . . . . . . . I-4

Connection Types: Type "M" . . . . . . . . . . . . . . . . . . . I-5

J INDEXPart Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . J-1

Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J-6

Jetstream Diesel UnitsPages A-1 & 2

Rigid LancesPage D-8

Rigid Lancing Machine *

Safety ApparelPages G-1 & 2

HosesPages D-1 & 2

Foot GunsPages C-7 & 8

Tube Cleaning NozzlesPages E-12 - 16

Flex LancesPage D-3

Flex Lance Safety GripPage G-6

Safety ApparelPages G-1 & 2



RIGID LANCE CLEANING

FLEX LANCE CLEANING

* Contact Jetstream Sale Representative forSpecifications of Automated Lancing Equipment

PIPE CLEANING

Multi-Gun ValvePage C-10

Strain Relief HosePage G-6

Rotomag Nozzleand Accessories

Pages E-7 - 10

IVJetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com


INTRODUCTION20,000 PSI

TUBE & PIPE CLEANING SYSTEMS

Jetstream offers a full line of tools for tubeand pipe cleaning operations, including rigidand flexible lances, automatic lancingmachines, valves, foot control guns, andnozzles for a variety of applications, all pow-ered by Jetstream units featuring patentedUNx™ pump technology. All Jetstreamequipment is designed for maximum produc-tivity, reliability, and safety, and every product

is backed by the dedicated Jetstream salesand engineering teams, available 24 hours aday, 365 days a year, to provide unmatchedservice and support.

V

INTRODUCTION20,000 PSI

SURFACE CLEANING SYSTEMS

CUTTING SYSTEMS

Jetstream offers a full line of toolsfor surface cleaning and surfacepreparation, including shut-in anddump style control guns, mowers,multi-gun valves, and nozzles fora variety of applications, all pow-ered by Jetstream units featuringpatented UNx™ pump technolo-gy. All Jetstream equipment isdesigned for maximum productivi-ty, reliability, and safety, and everyproduct is backed by the dedicat-ed Jetstream sales and engineer-ing teams, available 24 hours aday, 365 days a year, to provideunmatched service and support.



Abrasive cutting nozzles can be attached to handcontrol guns or mounted to automated systems forcutting a variety of materials in circumstances wheremore conventional cutting methods are impracticalor unsafe.

UNITS20,000 PSI



A-1

DIESEL UNITS

Jetstream offers a complete line of 20,000 psi diesel unitsdesigned for maximum reliability and simplicity, resulting inlower maintenance costs, less downtime, and greater pro-ductivity. In addition to a wide selection of standard unitsand options, close collaboration between Jetstream sales-men and engineers provides customers with almost unlimit-ed options for customization to meet specific needs.

Standard Features. High performance John Deere, Cummins, or Caterpillar

diesel engines from 110 to 500 horsepower. PTO clutch and covered belt drive. Jetstream UNx pump

- Superior performance, greater flexibility in the field, andreduced downtime and maintenance

- See UNx Features and Benefits on page B-1.. State-of-the-art controls

- Hydraulic or electronic throttle control - Hand-adjustable bypass valve (see page C-11) - Shutdown system to protect equipment

. Safety Devices - Rupture Disc Holder (see page G-3) - Severe Service Relief Valve (see page G-4)

. 10 ga hot dipped galvanized steel atmospheric water tank

. Water filtration system

. Toolbox to store additional fluid ends, supplies, and tools

. Adjustable height trailer hitch for safe, level towing

Options. Lifting Bail. Workbench and vise. Racks for hoses, guns, and rigid lances. Aluminum wheels. Remote engine shutdown. Charge pump. Stainless steel water filters. Direct water feed (no water tank). Custom paint color

Typical ApplicationsJetstream Diesel Units are the ultimate mobile solutionfor a variety of applications, including: . Surface Preparation. Coating removal. Tube Cleaning. Stripe Removal. Tank Cleaning

Standard Models. Four Wheel Tandem Axle trailer (above). Four Wheel Steerable Trailer. Gooseneck Trailer. Stationary Skid

UNITS20,000 PSI



A-2

DIESEL UNITS

Trailer Options. Hydraulic or electric brakes

. ICC approved trailer lighting

. Ball, ring, or hammerblow coupler

. Aluminum Wheels

Steerable Trailer Unit

Engine Power Approximate Unit Weight

HP kW Type lbs kg

Maximum OperatingPressureUNx

Pumppsi bar

* Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.

Plunger Stroke PlungerSize

Max. PumpDisplacement*

in mm gpm lpm

Goose Neck Trailer Unit

Stationary Skid

80 60 Trailer 4,850 2,200 3020 3.00 76 6 6.2 23.5 20,000 1,379

Skid 3,850 1,750

110 82 Trailer 4,850 2,200 3020 3.00 76 6 7.4 28.0 20,000 1,379

Skid 3,850 1,750

125 93 Trailer 5,100 2,320 3020 3.00 76 7 9.0 34.1 20,000 1,379

Skid 4,100 1,860

152 113 Trailer 6,700 3,040 3620 3.63 92 8 11.8 44.6 20,000 1,379

Skid 5,600 2,540

174 130 Trailer 6,500 2,950 3620 3.63 92 8 13.0 49.3 20,000 1,379

Skid 6,050 2,750

215 160 Trailer 7,950 3,610 4220 4.25 108 8 13.9 52.5 20,000 1,379

Skid 7,300 3,310

260 194 Trailer 8,050 3,650 4220 4.25 108 9 17.6 66.5 20,000 1,379

Skid 7,400 3,360

325 242 Trailer 9,450 4,290 4220 4.25 108 10 21.4 81.0 20,000 1,379

Skid 8,550 3,880

500 373 Skid 15,000 6,800 5020Q 5.00 127 11 39.5 150 20,000 1,379

UNITS20,000 PSI

ELECTRIC UNITS Jetstream offers a complete line of 20,000 psi electricunits designed for maximum reliability and simplicity,resulting in lower maintenance costs, less downtime,and greater productivity. In addition to a wide selec-tion of standard units and options, close collaborationbetween Jetstream salesmen and engineers pro-vides customers with almost unlimited options forcustomization to meet specific needs.

Standard Features. Open Drip, TEFC, or explosion proof motors from

60 to 250 horsepower

. Jetstream UNx pump: - Superior performance, greater flexibility in the

field, and reduced downtime and maintenance - See UNx Features and Benefits on page B-1

. Covered belt drive

. State-of-the-art controls - Hand-adjustable bypass valve - Start, stop, jog button control - Motor Hour Meter- Shutdown system to protect equipment

. Two rupture disc holders

. Water filtration system

. Hot dipped galvanized steel water tank

. Heavy-duty 8" deep hot-dipped galvanized skid

Options. Lifting bail

. Forklift pads

. Variable speed drive adds convenience, savesenergy, and eliminates the need for a bypass valve

. Charge pump

. Direct water feed (no water tank)

. Stainless steel filter

Standard Models. Stationary Skid

. Four Wheel Steerable Trailer

Typical ApplicationsJetstream Electric Units are ideal for use inside plants or otherpermanent or indoor applications, including:

. Surface Preparation

. Paint Booth Cleaning

. Tube Cleaning

. Waterjet Cutting



A-3

Stationary Skid

Steerable Trailer Unit

Plunger Stroke

UNITS20,000 PSI

ELECTRIC UNITS



A-4

Motor Output Unit Weight (Skid)

HP kW lbs kg

Maximum OperatingPressureUNx

Pumppsi bar

* Displacement (flow) values represented refer to “theoretical” flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-bearing components.

PlungerSize


in mm gpm lpm

RIGHT START PROGRAMIn order to ensure customer satisfaction, Jetstream has devel-oped the Right Start Program, a four step plan designed to pro-vide the owners and operators of new Jetstream waterblast unitswith the knowledge and support needed to feel familiar, confident,and satisfied with Jetstream equipment and personnel.

1. TRANSPORTATIONOnce a new waterblaster is built and thoroughly tested, theTraffic Manager contacts the new owner to arrange for theunit's arrival to the right place at the right time.

2. TRAININGAll new waterblasters include personal training by the RightStart Technician. Training involves both classroom and "hands-on" instruction to make sure that each operator is thoroughlyfamilar with the design and function of the unit and accessories,enabling them to safely put the new equipment to optimal use.

3. FOLLOW-UPWithin thirty days of delivery, and again within sixty days, theSales Representative will call to answer any questions andensure complete satisfaction.

4. TRUSTIf any questions or problems ever arise, the Jetstream team isavailable and committed to providing prompt answers andsolutions.

CUSTOM UNITSIn addition to a wide selection of standard unitsand options, close collaboration betweenJetstream salesmen and engineers provides cus-tomers with almost unlimited options for cus-tomization to meet specific needs. From custom-built trailers and skids to special control devices(pneumatic, electronic, hydraulic) and accessories,Jetstream can build the perfect unit for any job.

Enclosed Trailer Unit

Push Cart Truck Mounted Dual Pump Unit

Offshore Skid Special Poly Tank

60 45 3,500 1,590 3020 3.00 76 6 5.3 20.1 20,000 1,379

75 56 3,500 1,590 3020 3.00 76 6 6.7 25.3 20,000 1,379

100 75 3,500 1,590 3020 3.00 76 7 8.9 33.7 20,000 1,379

125 93 3,500 1,590 3620 3.63 92 8 11.1 42.2 20,000 1,379

150 112 5,400 2,450 3620 3.63 92 8 13.0 49.3 20,000 1,379

200 149 5,800 2,630 4220 4.25 108 9 17.8 67.5 20,000 1,379

250 186 5,800 2,630 4220 4.25 108 10 20.8 84.3 20,000 1,379

B-1

PUMPS & FLUID ENDS20,000 PSI

THE UNx™ ADVANTAGE FEATURES AND BENEFITS

Through nearly fifteen years of service, the Jetstream 20,000 psiUNx™ Fluid End has remained the most efficient, easy-to-use,and versatile waterblast tool available. Standard on everyJetstream 20,000 psi unit or bareshaft pump, the 20,000 psiUNx™ Fluid End is also available as a bolt-on replacement formost manufacturer's pump models to replace a worn or inefficientpump or as a powerful addition to an existing Jetstream pump toincrease the range of available working pressures. Models areavailable for use at up to 500 horsepower.

UNx™ Fluid End Features

Serviceability. Five minute packing change. Fifteen minute pop-out valve cartridge change. No special tools or equipment required. Plungers clamped, NOT threaded, for easy maintenance

Simplicity. Fewer parts than other 20,000 psi fluid ends. Uni-Valve™ one-piece cartridges include suction & dischargevalves, seats, springs, and seals. Swing-down manifold for easy access to components

Versatility. Fast in-the-field pressure range conversion with simple bolt-onJetstream UNx™ Fluid Ends. Convertibility of the UNx™ design allows one unit to do thework that another manufacturer would require multiple units orseveral hours of downtime to perform

20,000 psi UNx™ Fluid End Features. Water lubricated packing set. Carbide coated plungers. Specially designed manifold connections are superior to indus-try standard connections and feature easily replaceable seals. High volumetric efficiency. All pressure-bearing components precision machined fromhigh quality stainless steel



For more information on the UNx Fluid End design, order The Advanced UNx Waterblast Pump video, available in VHS, DVD & CD-ROM formats.

Part Format

Number

27437 VHS

28634 DVD

28635 CD-ROM

Five Minute Packing Change

Slide OutStuffing Boxes

15 Minute Valve Replacement

B-2




Butterworth L450/200Gardner-Denver TF450See Pages B-20 - 21

Butterworth L375Gardner-Denver TF375See Pages B-22 - 23

NLB Triplex Pumps150 to 200 horsepowerSee Pages B-26 - 27

Woma 150 SeriesSee Pages B-28 - 29

NLB Quintuplex PumpsUp to 250 horsepowerSee Pages B-24 - 25

UNx™ FLUID ENDSAVAILABLE MODELS

UNX™ FLUID END UPGRADES

UNITS. Choose from diesel or electric

. Select skid mount, 4-wheel steer-able trailer, gooseneck trailer, ortandem trailer

. See Section A for availablemodels

BARESHAFT PUMPS. Replace old, worn-out pumps

. Custom built systems

. Utilize existing engine and skid

. Available in sizes up to 500 HP

. Simple, safe, and easy to maintain

. See Pages B-3 - 13 for available models

FLUID ENDS. Supplement an existing JetstreamUNx™ pump to increase range ofavailable pressures.

. Pressure range conversions havebeen performed by two man teams attrade show demonstrations in fifteenminutes using hand tools and undersix minutes with air tools!

. See Pages B-14 - 19 for available models

. Increase productivity and reduce operating costs byreplacing an inefficient or worn fluid end on another manufacturer's pump with a Jetstream UNx™ Fluid End.

. Conversions available for all popular models.

. Bolt-on installation can be performed in minutes.

. Fewer parts, fewer problems.

. See pages B-20 - 29 for some models available.

. Consult factory for models not detailed in this catalog.

Other models available upon request. Contact Jetstreamfor details.

Also available for the following pump models:. Butterworth L74/T300. NLB 1012/TD-60. Tritan P-313. Tritan 5127. Wheatley HP125. Weatherford/American Aero FE-85/WBD-90. Weatherford/American Aero FE-145/WBD-150

QD-100/QD-200

B-3Jetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com



UNx™ BARESHAFT PUMPMODEL 5020QThe Jetstream model 5020Q waterblast pump is capable of power input of up to 500 horsepower and displacementover 39 gallons per minute at 20,000 psi. It is the mostadvanced and efficient high horsepower waterblast pump in the industry. Combining the strength and durability of a proven power end workhorse with the unparalleled simplicity, serviceability, and versatility of the UNx™ fluidend design, Jetstream bareshaft pumps are the best choice for those building their own system or replacing acomplicated, worn, or unreliable pump.

. 500 horsepower

. Flow of over 39 gallons per minute at 20,000 psi*

. Five Plunger (quintuplex) design

UNx™ Fluid End Features. Superior performance

. Greater flexibility in the field

. Reduced downtime and maintenance

. See UNx™ Features and Benefits on page B-1

UNx™ Power End Features. Pressurized power end lubrication with oil filter and cooler

. Forged steel shotpeened crankshaft

. Center roller bearings support crankshaft

Max. PowerInput

Plungers

in mm

500 373 5 5.00 127 413 39.6 150 26,500 117,900 20,000 1,379 5,430 2,460 4.84:1 12 45

Max.PumpRPM


gpm lpm

Max. OperatingPressure

psi bar

Total Weight

Pump OilCapacity

gal Ihp kW

MaximumFrame Load

GearPackRatioStroke

#lbs N lbs kg

PumpPart

Number

Plunger Size

in mm Top Ports Discharge Ports gpm lpm gpm lpm gpm lpm gpm lpm psi bar

Pump Displacement at Specified Pump Speeds* Max. OperatingPressure

DiameterNo.

Fluid End Specifications

150 RPM 200 RPM 300 RPM 413 RPM

Connection Types**

* Displacement (flow) values represented refer to "theoretical" flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure-

bearing components.

** See details on all connection types beginning on page I-2.

General Specifications

20K Port 20K HHP PortFemale Female

54765 #11 1.062 26.97 14.4 54.5 19.2 72.6 28.8 108.9 39.6 150 20,000 1,379




CommonEngine Powers

hp kW gpm lpm

500 373 39.6 150

Horsepower Chart

UNx™ BARESHAFT PUMPMODEL 5020Q

* Displacement (flow) values represented refer

to "theoretical" flow, neglecting inefficiency

resulting from compressibility of water and

expansion of pressure-bearing components.

PumpDisplacement*

at 20,000 psi (1,379 bar)

Related Items5020Q UNX™ FLUID ENDS – See Pumps & Fluid Ends, Page B-14SEVERE SERVICE RELIEF VALVE – See Safety, Page G-4BYPASS VALVE – See Control Guns & Valves, Page C-11REGULATOR VALVE – See Guns, Valves, & Filters, Page C-12FILTERS – See Guns, Valves, & Filters, Page C-16FITTINGS & GAUGES – See Fittings & Gauges, Section F




UNx™ BARESHAFT PUMPMODEL 4220The Jetstream model 4220 waterblast pump is capable of power input up to 325 horsepower and displacement of over twenty-one gallons per minute at 20,000 psi. It isthe most advanced and efficient waterblast pump of itssize in the industry. Combining the strength and durabilityof a proven power end workhorse with the unparalleledsimplicity, serviceability, and versatility of the UNx™ fluidend design, Jetstream bareshaft pumps are the bestchoice for those building their own system or replacing acomplicated, worn, or unreliable pump.

. Up to 325 horsepower

. Flow of over to 21 gallons per minute at 20,000 psi*

. Three Plunger (triplex) design





UNx™ Power End Features. Ductile iron power frame is the strongest in the industry

. Heat treated billet alloy steel crankshaft

. Largest bearings of any comparable pump on the market

Max. PowerInput

Plungers

in mm

325 242 3 4.25 108 150 514 21.4 81.0 17,750 78,950 20,000 1,379 1,800 820 80W-90 9.0 34.0

PumpRPM

Min. Max.


gpm lpm


psi bar

Total Weight Pump Oil

gal Ihp kW

MaximumFrame Load

TypeCapacityStroke

#lbs N lbs kg

PumpPart

Number

Plunger Size



DiameterNo.


200 RPM 300 RPM 400 RPM 514 RPM

Connection Types**


bearing components.



52120 #8 .800 20.32 4.6 21.0 8.3 31.5 11.1 42.0 14.3 54.0 20,000 1,379

52125 #9 .900 22.86 7.0 26.6 10.5 39.9 14.1 53.2 18.0 68.3 20,000 1,379

52507 #10 .980 24.89 8.3 31.5 12.5 47.3 16.7 63.1 21.4 81.0 20,000 1,379

20K PortFemale

20K PortFemale

hp kW gpm lpm

200 149 15.5 58.7

215 160 16.7 63.1

250 186 19.4 73.3

260 194 20.2 76.3

300 224 23.3 88.0




CommonEngine Powers

Horsepower Chart

UNx™ BARESHAFT PUMPMODEL 4220





PumpDisplacement*

at 20,000 psi (1,379 bar)

Related Items4220 UNX™ FLUID ENDS – See Pumps & Fluid Ends, Page B-16SEVERE SERVICE RELIEF VALVE – See Safety, Page G-4BYPASS VALVE – See Control Guns & Valves, Page C-11REGULATOR VALVE – See Guns, Valves, & Filters, Page C-12FILTERS – See Guns, Valves, & Filters, Page C-16FITTINGS & GAUGES – See Fittings & Gauges, Section F

15 51279 Plate, Top Cover16 51540 Plate, Back Cover17 26195 Gasket, Cover Plate18 28062 Gage, Oil Level19 25946 Nipple20 27101 Ball Valve21 25928 Plug22 26705 Magnet23 51487 Connecting Rod24 26051 Bearing, Journal

26389 Crankshaft28826 Crankshaft, High Strength

26 26369 Setscrew27 51731 Crosshead




UNx™ BARESHAFT PUMPMODEL 4220POWER END REPLACEMENT PARTS

ItemPart

NumberDescription

1 26491 Capscrew2 51536 Frame Cap, Outboard3 26259 Shim, 0.02" Thick4 26259-1 Shim, 0.01" Thick5 26259-2 Shim, 0.0075" Thick6 26259-3 Shim, 0.005" Thick7 26376 Bearing Race8 26390 Bearing9 51538 Frame Cap, Inboard10 26208 Crankshaft Seal11 26798 Washer12 26361 Capscrew13 26484 Oil Trough 14 26360 Breather Cap

ItemPart

NumberDescription

28 51534 Pin, Crosshead29 26487 Deflector30 51736 Plunger coupling31 51421 Power Frame32 51659 Trunnion33 26500 Capscrew34 26481 Oil Seal35 51713 Seal Plate36 26479 O-Ring37 26468 Cotter Pin38 50295 Trunnion Rod39 53632 Cover, Rod Box40 26053 O-Ring41 26482 Setscrew

ItemPart

NumberDescription

25




UNx™ BARESHAFT PUMPMODEL 3620The Jetstream model 3620 waterblast pump is capable ofpower input up to 200 horsepower and displacement ofthirteen gallons per minute at 20,000 psi. It is the mostadvanced and efficient medium horsepower waterblastpump in the industry. Combining the strength and durabil-ity of a proven power end workhorse with the unparal-leled simplicity, serviceability, and versatility of the UNx™fluid end design, Jetstream bareshaft pumps are the bestchoice for those building their own system or replacing acomplicated, worn, or unreliable pump.


. Flow up to 13 gallons per minute at 20,000 psi*








Max. PowerInput

Plungers

in mm

PumpRPM

Min. Max.


gpm lpm


psi bar

Total WeightPump Oil

gal Ihp kW

MaximumFrame Load

TypeCapacityStroke

#lbs N lbs kg


PumpPart

Number

Plunger Size



DiameterNo.


300 RPM 400 RPM 500 RPM 600 RPM

Connection Types**


bearing components.


20K Port 20K PortFemale Female

7.1 26.9 9.5 35.8 11.8 44.8 13.0 49.3 20,000 1,37952585 #8 .800 20.32

200 149 3 3.63 92.1 150 550 13.0 49.3 11,300 50,300 20,000 1,379 1,720 780 80W-90 9.0 34.0




CommonEngine Powers

hp kW gpm lpm

152 113 11.8 44.6

174 130 13.5 51.0

200 149 15.5 58.7

Horsepower Chart






PumpDisplacement*

at 20,000 psi (1,379 bar)

Related Items3620 UNX™ FLUID ENDS – See Pumps & Fluid Ends, Page B-16SEVERE SERVICE RELIEF VALVE – See Safety, Page G-4BYPASS VALVE – See Control Guns & Valves, Page C-11REGULATOR VALVE – See Guns, Valves, & Filters, C-12FILTERS – See Guns, Valves, & Filters, Page C-16FITTINGS & GAUGES – See Fittings & Gauges, Section F

29 26487 Deflector30 51736 Plunger coupling31 51421 Power Frame32 51659 Trunnion33 26500 Capscrew34 26481 Oil Seal35 51713 Seal Plate36 26479 O-Ring37 26468 Cotter Pin38 50295 Trunnion Rod39 53632 Cover, Rod Box40 26053 O-Ring41 26482 Setscrew

B-10




15 51279 Plate, Top Cover16 51540 Plate, Back Cover17 26195 Gasket, Cover Plate18 28062 Gage, Oil Level19 25946 Nipple20 27101 Ball Valve21 25928 Plug22 26705 Magnet23 51487 Connecting Rod24 26051 Bearing, Journal25 53600 Crankshaft26 26369 Setscrew27 51731 Crosshead28 51534 Pin, Crosshead


ItemPart

NumberDescription

1 26491 Capscrew2 51536 Frame Cap, Outboard3 26259 Shim, 0.02" Thick4 26259-1 Shim, 0.01" Thick5 26259-2 Shim, 0.0075" Thick6 26259-3 Shim, 0.005" Thick7 26376 Bearing Race8 26390 Bearing9 51538 Frame Cap, Inboard10 26208 Crankshaft Seal11 26798 Washer12 26361 Capscrew13 26484 Oil Trough 14 26360 Breather Cap

ItemPart

NumberDescriptionItem

PartNumber

Description

B-11




UNx™ BARESHAFT PUMPMODEL 3020The Jetstream model 3020 waterblast pump is capable ofpower input up to 150 horsepower and displacement ofnine gallons per minute at 20,000 psi. It is the mostadvanced and efficient compact waterblast pump in theindustry. Combining the strength and durability of aproven power end workhorse with the unparalleled sim-plicity, serviceability, and versatility of the UNx™ fluid enddesign, Jetstream bareshaft pumps are the best choicefor those building their own system or replacing a compli-cated, worn, or unreliable pump.










Max. PowerInput

Plungers

in mm

PumpRPM

Min. Max.


gpm lpm


psi bar

Total WeightPump Oil

gal Ihp kW

MaximumFrame Load

TypeCapacityStroke

#lbs N lbs kg

PumpPart

Number

Plunger Size



DiameterNo.


300 RPM 400 RPM 500 RPM 600 RPM

Connection Types**


bearing components.



52110 #6 .635 16.13 3.7 14.0 4.9 18.7 6.2 23.4 7.4 28.0 20,000 1,379

52115 #7 .700 17.78 4.5 17.0 6.0 22.7 7.5 28.4 9.0 34.1 20,000 1,379

20K PortFemale

20K PortFemale

150 112 3 3.00 76.2 150 600 9.0 34.1 9,500 40,260 20,000 1,379 970 440 80W-90 5.0 19.0

B-12




CommonEngine Powers

hp kW gpm lpm

60 45 4.7 17.6

75 56 5.8 22.0

100 75 7.8 29.3

110 82 8.5 32.3

125 93 9.7 36.7

150 112 11.6 44.0

Horsepower Chart






PumpDisplacement*

at 20,000 psi (1,379 bar)

Related Items3020 UNX™ FLUID ENDS – See Pumps & Fluid Ends, Page B-18SEVERE SERVICE RELIEF VALVE – See Safety, Page G-4BYPASS VALVE – See Control Guns & Valves, Page C-11REGULATOR VALVE – See Guns, Valves, & Filters, Page C-12FILTERS – See Guns, Valves, & Filters, Page C-16FITTINGS & GAUGES – See Fittings & Gauges, Section F

B-13




28 26623 Deflector29 51737 Plunger coupling30 51748 Power Frame31 51659 Trunnion32 26462 Capscrew33 25536 Oil Seal34 51712 Seal Plate35 26478 O-Ring36 26468 Cotter Pin37 51666 Trunnion Rod38 53681 Cover, Rod Box39 25333 O-Ring40 26483 Setscrew

15 51752 Plate, Back Cover16 26496 Gasket, Cover Plate17 28062 Gage, Oil Level18 25946 Nipple19 27101 Ball Valve20 25928 Plug21 26705 Magnet22 51749 Connecting Rod23 26486 Bearing, Journal24 25508 Crankshaft25 25132 Setscrew26 51738 Crosshead27 52077 Pin, Crosshead


ItemPart

NumberDescription

1 26491 Capscrew2 51733 Frame Cap, Outboard3 26495 Shim, 0.02" Thick4 26495-1 Shim, 0.01" Thick5 26495-2 Shim, 0.0075" Thick6 26495-3 Shim, 0.005" Thick7 25541 Bearing & Race8 51732 Frame Cap, Inboard9 25428 Crankshaft Seal10 25251 Washer11 26492 Capscrew12 26484 Oil Trough 13 26360 Breather Cap14 50807 Plate, Top Cover

ItemPart

NumberDescriptionItem

PartNumber

Description

B-14




The 20,000 psi UNx™ Fluid End is a cost-effective solu-tion to increase the available operating pressure or rangeof pressures of an existing Jetstream 5200Q UNx Pump.The model 5220Q delivers all of the benefits that definethe UNx™ Fluid Ends as the best in the industry.

. 500 horsepower

. Flow of over 39 gallons per minute at 20,000 psi*

. Five plunger (quintuplex) design

. Superior performance




. Includes hose adapters and one rupture disc holder.

. Choose an additional rupture disc holder or a SevereService Relief Valve as a second safety device.

. Pressure gauge not included

UNx™ FLUID ENDMODEL 5020Q

Fluid EndPart

Number


Connection Types** Plunger Size

No.

MaximumFlow*

Max.RPM

Plunger Stroke

Diameter

Top Ports Discharge Ports gpm lpm psi barin mm in mm


bearing components.


CommonEngine Powers

hp kW gpm lpm

500 373 39.6 150

Horsepower Chart

Fluid End Specs

PumpDisplacement*

at 20,000 psi (1,379 bar)

54825 20K Port Female 20K HHP Port Female #11 1.062 26.97 5.00 127 413 39.6 150 20,000 1,379

Related ItemsSEVERE SERVICE RELIEF VALVE – See Safety, Page G-4BYPASS VALVE – See Control Guns & Valves, Page C-11REGULATOR VALVE – See Guns, Valves, & Filters, Page C-12FILTERS – See Guns, Valves, & Filters, Page C-16FITTINGS & GAUGES – See Fittings & Gauges, Section F

B-15




12d 51773 Hold Down Ring12e 51772 Cap13 26500 Manifold Bolt14 52114 Lifting Rod15 54824 Manifold16 50295 Trunnion Rod17 26468 Cotter Pin18 51659 Trunnion19 54638 Washer20 28900 Adapter Plate Bolt21 50889 Pump Wrench22 54854 Backup Ring, HHP

Port Fitting23 26523 O-Ring, HHP Port

Fitting

ItemPart

NumberDescription

8c 26899 Hose Fitting, 1/4" NPT8d 52494 Lube Manifold8e 26689 Capscrew8f 26876 Needle Valve9 54847 Plug, 20K HHP Port Male10 54844 Adapter, 20K HHP Port Male x

1- 5/16" Type "M" Male11 54846 Adapter, 20K HHP Port Male x

1" MP Female12 52035 Rupture Disc Holder12a 52040 20K Seal12b 52043 Base12c 51838 Disc, 24,000 psi Burst Pressure

51837 Disc, 27,000 psi Burst Pressure51836 Disc, 29,000 psi Burst Pressure

1 54827 #11 Plunger2 54828 #11 Gland Nut3 26416 O-Ring4 54856 #11 Packing Set5 54627 Adapter Plate6 54826 #11 Stuffing Box7 51790 Uni-Valve7a 50465 Uni-Valve Seal Kit7b 26550 Discharge Valve Spring7c 26549 Suction Valve Spring7d 51814 Spring Retainer7e 26546 Retaining Ring8 54690 Lube Harness Ay8a 26874 Hose Fitting, 1/8" NPT8b 26469 Hose (Order in feet)

UNx™ FLUID ENDMODEL 5020QREPLACEMENT PARTS

Item ItemPart

NumberDescription Part

NumberDescription




B-16

The 20,000 psi UNx™ Fluid End is a cost-effective solution toincrease the available operating pressure or range of pressuresof an existing Jetstream 3600 or 4200 UNx Pump. The model4220 and model 3620 deliver all of the benefits that define theUNx™ Fluid Ends as the best in the industry.. Up to 325 horsepower. Flow of over 21 gallons per minute at 20,000 psi*. Three plunger (triplex) design. Superior performance. Greater flexibility in the field. Reduced downtime and maintenance. See UNx™ Features and Benefits on page B-1. Includes hose adapters and one rupture disc holder.. Choose an additional rupture disc holder or a Severe

Service Relief Valve as a second safety device.. Pressure gauge not included

UNx™ FLUID ENDMODELS 4220 & 3620

Fluid EndPart

Number



No.

MaximumFlow*

Max.RPM

Plunger Stroke

Diameter



bearing components.


CommonEngine Powers

hp kW gpm lpm

152 113 11.8 44.6

174 130 13.5 51.0

200 149 15.5 58.7

215 160 16.7 63.1

250 186 19.4 73.3

260 194 20.2 76.3

300 224 23.3 88.0

Horsepower Chart

3620 Fluid End

PumpDisplacement*

at 20,000 psi (1,379 bar)

51995 20K Port Female 20K Port Female #8 .800 20.32 3.63 92 550 13.0 49.3 20,000 1,379

Fluid EndPart

Number



No.

MaximumFlow*

Max.RPM

Plunger Stroke

Diameter


4220 Fluid End








B-17

10d 51773 Hold-Down Ring10e 51772 Cap11 26500 Manifold Bolt12 51975 Lube Harness

12a 27101 Ball Valve12b 25946 Nipple12c 53242 Lube Manifold12d 26802 Reducing Bushing12e 26874 Hose Fitting12f 26469 Hose13 51659 Trunnion14 26468 Cotter Pin15 50295 Trunnion Rod16 50889 Pump Wrench

ItemPart

NumberDescription

8 51790 Uni-Valve8a 50465 Uni-Valve Seal Kit8b 26550 Discharge Valve Spring8c 26549 Suction Valve Spring8d 51814 Spring Retainer8e 26546 Retaining Ring9 51818 Manifold10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base10c 51838 Disc, 24,000 psi Burst

51837 Disc, 27,000 psi Burst51836 Disc, 29,000 psi Burst

1 26487 Deflector2 51736 Plunger Coupling3 50301 #8 Plunger

51828 #9 Plunger52504 #10 Plunger

4 51832 #8 Gland Nut51829 #9 Gland Nut52501 #10 Gland Nut

5 26416 O-Ring6 51857 #8 Packing Set

51826 #9 Packing Set52509 #10 Packing Set

7 50306 #8, #9 Stuffing Box52502 #10 Stuffing Box

UNx™ FLUID ENDMODEL 4220 & 3620REPLACEMENT PARTS

Item ItemPart


NumberDescription

52075 20K Port Female 20K Port Female #6 .635 16.13 3.00 76.2 600 7.4 28.0 20,000 1,379

52080 20K Port Female 20K Port Female #7 .700 17.78 3.00 76.2 600 9.0 34.1 20,000 1,379




B-18

The 20,000 psi UNx™ Fluid End is a cost-effective solution toincrease the available operating pressure or range of pres-sures of an existing Jetstream 3000 UNx Pump. The model3020 delivers all of the benefits that define the UNx™ FluidEnds as the best in the industry.


. Flow up to 9.0 gallons per minute at 20,000 psi*

. Three plunger (triplex) design








UNx™ FLUID ENDMODEL 3020

Fluid EndPart

Number



No.

MaximumFlow*

Max.RPM

Plunger Stroke

Diameter


* Displacement (flow) values represented refer to "theoretical" flow, neglecting inefficiency resulting from compressibility of water and expansion of pressure

bearing components.


Fluid End Specs


CommonEngine Powers

hp kW gpm lpm

60 45 4.7 17.6

75 56 5.8 22.0

100 75 7.8 29.3

110 82 8.5 32.3

125 93 9.7 36.7

150 112 11.6 44.0

Horsepower ChartPump

Displacement* at 20,000 psi (1,379 bar)




B-19

10e 51772 Cap11 26462 Manifold Bolt12 51970 Lube Harness

12a 27101 Ball Valve12b 25946 Nipple12c 53242 Lube Manifold12d 26874 Hose Fitting12e 26469 Hose13 51659 Trunnion14 26468 Cotter Pin15 51666 Trunnion Rod16 50064 Pump Wrench

ItemPart

NumberDescription

8b 25908 Discharge Valve Spring8c 26145 Suction Valve Spring8d 51758 Spring Retainer8e 26501 Retaining Ring9 51558 Manifold10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base10c 51838 Disc, 24,000 psi Burst


10d 51773 Hold-Down Ring


51739 #7 Plunger4 51761 #6 Gland Nut

51851 #7 Gland Nut5 25165 O-Ring6 51786 #6 Packing Set

51787 #7 Packing Set7 51431 #6, #7 Stuffing Box8 51780 Uni-Valve8a 51968 Uni-Valve Seal Kit

UNx™ FLUID ENDMODEL 3020REPLACEMENT PARTS

Item ItemPart


NumberDescription

20K PortFemale

20K PortFemale




B-20

The Jetstream UNx™ Fluid End Upgrade is ideal for replacinga damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase available operating pressure orrange of pressures for those who have already converted tothe UNx™. The upgrade delivers all of the benefits of theUNx™ Fluid End design.





. See UNx™ Features and Benefits on page B-1.




. Bolt-on installation to an existing Butterworth L-450 orGardner-Denver TF-450 power end requires only minutes.

UNx™ FLUID END UPGRADEBUTTERWORTH L-450 PUMPSGARDNER-DENVER TF-450 PUMPS

CommonEngine Powers

hp kW gpm lpm

200 149 15.5 58.7

215 160 16.7 63.1

250 186 19.4 73.3

260 194 20.2 76.3

300 224 23.3 88.0




Fluid EndPart

Number

Plunger Size



DiameterNo.


200 RPM 300 RPM 400 RPM 500 RPM

Connection Types**


bearing components.


52090 #8 .800 20.32 5.9 22.2 8.8 33.4 11.8 44.5 14.7 55.6 20,000 1,379

54780 #9 .900 22.86 7.4 28.2 11.2 42.2 14.9 56.3 18.6 70.4 20,000 1,379

53660 #10 .980 24.89 8.8 33.4 13.2 50.1 17.6 66.8 22.1 83.5 20,000 1,379




B-21

8a 50465 Uni-Valve Seal Kit8b 26550 Discharge Valve Spring8c 26549 Suction Valve Spring8d 51814 Spring Retainer8e 26546 Retaining Ring9 51974 Manifold10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base10c 51838 Disc, 24,000 psi Burst


10d 51773 Hold-Down Ring10e 51772 Cap11 25607 Manifold Bolt


51828 #9 Plunger52504 #10 Plunger

4 51832 #8 Gland Nut51829 #9 Gland Nut52501 #10 Gland Nut

5 26416 O-Ring6 51857 #8 Packing Set

51826 #9 Packing Set52509 #10 Packing Set

7 51991 #8, #9 Stuffing Box53296 #10 Stuffing Box

8 51790 Uni-Valve

UNx™ FLUID END UPGRADEBUTTERWORTH L-450 PUMPSGARDNER-DENVER TF-450 PUMPSREPLACEMENT PARTS

Item ItemPart


NumberDescription

12 51955 Lube Harness12a 27101 Ball Valve12b 25946 Nipple12c 53242 Lube Manifold12d 26802 Reducing Bushing12e 26874 Hose Fitting12f 26469 Hose12g 27475 Needle Valve12h 26465 Nipple13 51659 Trunnion14 26468 Cotter Pin15 50295 Trunnion Rod

16 50889 Pump Wrench17 26212 Adapter Plate Bolt

18 51714 Adapter Plate19 51719 Plunger Adapter

Item PartNumber

Description




B-22

20K PortFemale

20K PortFemale










. Bolt-on installation to an existing Butterworth L-375 orGardner-Denver TF-375 power end requires only minutes.

UNx™ FLUID END UPGRADEBUTTERWORTH L-375 PUMPSGARDNER-DENVER TF-375 PUMPS

CommonEngine Powers




Fluid EndPart

Number

Plunger Size



DiameterNo.

200 RPM 300 RPM 400 RPM 500 RPM

Connection Types**


bearing components.


52545 #8 .800 20.32 4.9 18.5 7.3 27.8 9.8 37.1 12.2 46.3 20,000 1,379

54790 #9 .900 22.86 6.2 23.5 9.3 35.2 12.4 47.0 15.5 58.7 20,000 1,379

hp kW gpm lpm

152 113 11.8 44.6

174 130 13.5 51.0

200 149 15.5 58.7




B-23




51826 #9 Packing Set7 50306 #8, #9 Stuffing Box8 51790 Uni-Valve8a 50465 Uni-Valve Seal Kit8b 26550 Discharge Valve Spring8c 26549 Suction Valve Spring

UNx™ FLUID END UPGRADEBUTTERWORTH L-375 PUMPSGARDNER-DENVER TF-375 PUMPSREPLACEMENT PARTS

ItemPart

NumberDescription

8d 51814 Spring Retainer8e 26546 Retaining Ring9 52487 Manifold10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base10c 51838 Disc, 24,000 psi Burst


10d 51773 Hold-Down Ring10e 51772 Cap11 25607 Manifold Bolt12 51955 Lube Harness12a 27101 Ball Valve

ItemPart

NumberDescription

12b 25946 Nipple12c 53242 Lube Manifold12d 26802 Reducing Bushing12e 26874 Hose Fitting12f 26469 Hose12g 27475 Needle Valve12h 26465 Nipple13 51659 Trunnion14 26468 Cotter Pin15 50295 Trunnion Rod16 50889 Pump Wrench17 26220 Adapter Plate Bolt18 52197 Adapter Plate19 52196 Plunger Adapter

ItemPart

NumberDescription




B-24

20K PortFemale

20K PortFemale










. Bolt-on installation to an existing NLB triplex power endrequires only minutes

. 10150. 10155. 10200. 10205. 10225. 12155

. 12205. 12225. 20153. 20156. 20155. 20203

. 20205. 20225. 24155. 24205. 24225. 40201

UNx™ FLUID END UPGRADENLB TRIPLEX PUMPS150 TO 225 HORSEPOWER

CommonEngine Powers

hp kW gpm lpm

152 113 11.8 44.6

174 130 13.5 51.0

200 149 15.5 58.7




Fluid EndPart

Number

Plunger Size



DiameterNo.

200 RPM 300 RPM 400 RPM 500 RPM

Connection Types**


bearing components.


52160 #8 .800 20.32 4.6 21.0 8.3 31.5 11.1 42.0 13.9 52.5 20,000 1,379

54795 #9 .900 22.86 7.0 26.6 10.5 39.9 14.1 53.2 17.6 66.5 20,000 1,379

This UNx™ Fluid End Upgrade can beinstalled in place of any of the followingNLB fluid end models:

Once upgraded to the UNx™ design, theNLB unit can be supplemented withadditional UNx™ fluid ends to expand itsrange of operating pressures from 6,000psi to 40,000 psi.




B-25




51826 #9 Packing Set7 50306 #8, #9 Stuffing Box8 51790 Uni-Valve8a 50465 Uni-Valve Seal Kit8b 26550 Discharge Valve Spring8c 26549 Suction Valve Spring

UNx™ FLUID END UPGRADENLB TRIPLEX PUMPS150 TO 225 HORSEPOWERREPLACEMENT PARTS

ItemPart

NumberDescription

8d 51814 Spring Retainer8e 26546 Retaining Ring9 51818 Manifold10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base10c 51838 Disc, 24,000 psi Burst


10d 51773 Hold-Down Ring10e 51772 Cap11 25607 Manifold Bolt12 51955 Lube Harness12a 27101 Ball Valve

ItemPart

NumberDescription

12b 25946 Nipple12c 53242 Lube Manifold12d 26802 Reducing Bushing12e 26874 Hose Fitting12f 26469 Hose12g 27475 Needle Valve12h 26465 Nipple13 51659 Trunnion14 26468 Cotter Pin15 50295 Trunnion Rod16 50889 Pump Wrench17 26500 Adapter Plate Bolt18 50293 Adapter Plate19 26669 Adapter Plate Nut20 51766 Plunger Adapter

ItemPart

NumberDescription




B-26

20K PortFemale

20K PortFemale



. Five plunger (quintuplex) design








. Bolt-on installation to an existing NLB quintuplex power endrequires only minutes

. 10250. 20253

UNx™ FLUID END UPGRADENLB QUINTUPLEX PUMPSUP TO 250 HORSEPOWER

CommonEngine Powers

hp kW gpm lpm

200 149 15.5 58.7

215 160 16.7 63.1

250 186 19.4 73.3

260 194 20.2 76.3




Fluid EndPart

Number

Plunger Size



DiameterNo.

150 RPM 200 RPM 300 RPM 400 RPM

Connection Types**


bearing components.


53580 #8 .800 20.32 6.9 26.3 9.3 35.0 13.9 52.5 18.5 70.0 20,000 1,379

This UNx™M Fluid End Upgrade can beinstalled in place of either of the followingNLB fluid end models:

Once upgraded to the UNx™ design, theNLB unit can be supplemented withadditional UNx™ fluid ends to expand itsrange of operating pressures from 6,000psi to 40,000 psi.

HOSES & LANCES20,000 PSI



B-27

1 26487 Deflector2 51736 Plunger Coupling3 50301 #8 Plunger4 51832 #8 Gland Nut5 26416 O-Ring6 51857 #8 Packing Set7 50306 #8 Stuffing Box8 51790 Uni-Valve8a 50465 Uni-Valve Seal Kit8b 26550 Discharge Valve Spring8c 26549 Suction Valve Spring8d 51814 Spring Retainer8e 26546 Retaining Ring9 53599 Manifold

UNX™ FLUID END UPGRADENLB QUINTUPLEX PUMPSUP TO 250 HORSEPOWERREPLACEMENT PARTS

ItemPart

NumberDescription

10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base10c 51838 Disc, 24,000 psi Burst


10d 51773 Hold-Down Ring10e 51772 Cap11 27550 Manifold Bolt12 53590 Lube Harness12a 27101 Ball Valve12b 25946 Nipple12c 53793 Lube Manifold12d 27729 Reducing Bushing

ItemPart

NumberDescription

12e 26874 Hose Fitting12f 26469 Hose12g 27475 Needle Valve12h 26465 Nipple13 51659 Trunnion14 26468 Cotter Pin15 50295 Trunnion Rod16 50889 Pump Wrench17 27550 Adapter Plate Bolt18 53602 Adapter Plate19 51766 Plunger Adapter20 27551 Suction Manifold Bolt21 25566 O-Ring22 53601 Suction Manifold

ItemPart

NumberDescription




B-28

20K PortFemale

20K PortFemale

The Jetstream UNx Fluid End Upgrade is ideal for replacing adamaged, costly, or unreliable fluid end. It is also a cost-effec-tive solution to increase available operating pressure or rangeof pressures for those who have already converted to theUNx™. The upgrade delivers all of the benefits of the UNx™Fluid End design.

. Flow up over 9 gallons per minute at 20,000 psi*








. Bolt-on installation to an existing Woma 150 Series powerend requires only minutes

. 1502. 1503. 150 ARP

. 150 Z. 150 Z-2000

UNX™ FLUID END UPGRADEWOMA 150 SERIES PUMPS

CommonEngine Powers

hp kW gpm lpm

75 56 5.8 22.0

100 75 7.8 29.3

110 82 8.5 32.3

125 93 9.7 36.7




Fluid EndPart

Number

Plunger Size



DiameterNo.

150 RPM 200 RPM 300 RPM 400 RPM

Connection Types**


bearing components.


54565 #7 .700 17.78 3.7 14.2 5.6 21.2 7.5 28.3 9.4 35.4 20,000 1,379

This UNx™ Fluid End Upgrade can beinstalled in place of any of the followingWoma 150 Series fluid end models:

Once upgraded to the UNx™ design, theNLB unit can be supplemented withadditional UNx™ fluid ends to expand itsrange of operating pressures.




B-29

UNx™ FLUID END UPGRADEWOMA 150 SERIES PUMPS REPLACEMENT PARTS

8e 26501 Retaining Ring9 51970 Lube Harness9a 27101 Ball Valve9b 25946 Nipple9c 53242 Lube Manifold9d 26874 Hose Fitting9e 26469 Hose10 52035 Rupture Disc Holder10a 52040 Seal10b 52043 Base

ItemPart

NumberDescription

1 54426 Adapter Plate2 28616 Capscrew3 54504 #7 Plunger4 54509 #7 Gland Nut5 25165 O-ring6 51787 #7 Packing Set7 54498 #7 Stuffing Box8 51780 Uni-Valve8a 51968 Uni-Valve Seal Kit8b 25908 Discharge Valve Spring8c 26145 Suction Valve Spring8d 51758 Spring Retainer

ItemPart

NumberDescription

10c 51838 Disc, 24,000 psi Burst51837 Disc, 27,000 psi Burst51836 Disc, 29,000 psi Burst

10d 51773 Hold-Down Ring10e 51772 Cap11 28462 Capscrew12 54493 Manifold13 51666 Trunnion Rod14 26468 Cotter Pin15 51659 Trunnion16 26544 5/8" Hex Wrench17 25421 3/4" Hex Wrench

ItemPart

NumberDescription

C-1

GUNS, VALVES, & FILTERS20,000 PSI

DuraSafe™ 20,000 psi hand-operated dump style controlguns allow the operator to have complete control of thepressure at all times. Designed with safety, comfort, andsimplicity in mind, they are used for a variety of surfacecleaning applications and are available in four standardconfigurations.

. 30 second field replaceable cartridge design for minimaldowntime

. 48" distance from primary trigger to end of barrel toensure maximum operator safety**

. Lightweight

. DCP models feature fully adjustable body pad for maxi-mum operator comfort in any position (shoulder, hip,chest, etc.), while an ergonomically designed shoulderstock is included with DCPx models

. Adjustable secondary grip included with single triggermodels

. Dual trigger models require both triggers to be engagedin order to build system pressure for maximum operatorsafety

. All pressure-bearing components are stainless steel

. Equipped with holder for single nozzle. Ideal for usewith the Jetstream Orbi-Jet self-rotating nozzles

REPLACEMENT CARTRIDGEAll 20,000 psi DuraSafe™ Dump Style Control Guns utilize the C-20 cartridge, shown below, to completelyrebuild the dump valve in about 30 seconds!Part Number 51869



DURASAFE™ HAND GUNSDUMP STYLE

DCP-20Part No. 53305

DCPx-20Part No. 54375

DCP-20DDPart No. 53230

DCPx-20DDPart No. 54425

Part Number

Model

53305543755323054425

TriggerActuation

Rest Type Inlet Connection*Outlet

(Nozzle)Connection

Length**

in cm

71 18066 16775 19070 177

DCP-20DCPx-20

DCP-20DDDCPx-20D

SingleSingleDualDual

Body PadShoulder Stock


20K Port Male20K Port Male20K Port Male20K Port Male

9/16" MP Male9/16" MP Male9/16" MP Male9/16" MP Male

Weight

lbs kg

12.3 5.611.4 5.216.7 7.615.8 7.2


psi bar

20,000 1,37920,000 1,37920,000 1,37920,000 1,379

* Adapters available for other connection types. See details on all connection types beginning on page I-2.** Custom length barrels available. Call factory for information.

1 51874 HP Nozzle Sleeve2 26635 Collar3 26645 Gland Nut4 53260 Handle Assembly4a 53292 Handle4b 53295 Trigger Assembly4c 26116 Pin5 26689 Capscrew6 25193 O-Ring7 53215 DCP-20 Body Assembly

54365 DCPx-20 Body Assembly

C-2

GUNS, VALVES & FILTERS20,000 PSI

DURASAFE™ HAND GUNSDUMP STYLEREPLACEMENT PARTS

Related ItemsMULTI-GUN VALVE (MGV) – See Guns, Valves, & Filters, Page C-10ORBI-JET NOZZLES – See Nozzles, Pages E-1 - 5HP NOZZLES – See Nozzles, Page E-6DURASAFE™ SAFETY SHROUD – See Safety, Page G-5



ItemPart

NumberDescription

7 53245 DCP-20DD Body Assembly54430 DCPx-20DD Body Assembly

8 51869 C-20 Cartridge9 25467 O-Ring

10 53175 Cartridge Plug11 53304 Shoulder Stock (DCP models only)12 25296 Nut (DCP models only)13 53303 Stud (DCP models only)14 50127 Extension (DCPx models only)15 50124 Shoulder Stock (DCPx models only)16 52040 20K Seal

ItemPart

NumberDescription


Length** Weight

C-3


. 30 second field replaceable cartridge design forminimal downtime

. 48" distance from primary trigger to end of barrel toensure maximum operator safety**

. Lightweight

. DCPSi model features a fully adjustable body padfor maximum operator comfort in any position(shoulder, hip, chest, etc.)

. DCPxSi model includes an ergonomically designedshoulder stock

. Adjustable secondary hand grip


. Equipped with holder for single nozzle. Ideal foruse with the Jetstream Orbi-Jet self-rotating nozzles

DuraSafe™ 20,000 psi hand-operatedshut-in style control guns allow theoperator to have complete control ofthe pressure at all times. Designedwith safety, comfort, and simplicity inmind, they are used for a variety ofsurface cleaning applications and areavailable in standard configurations.

. Shut-in style control guns do notdump water when the trigger isreleased. Useful in applicationswhere excess water spillage anddisposal are concerns. Use withplunger style pumps such as theUNx™ require the installation of a Shut-In Regulator Valve (seepage C-12).

REPLACEMENT CARTRIDGE20,000 psi DuraSafe™ Shut-in Style Control Guns utilizethe CPSi-20 cartridge, shown below, to completelyrebuild the gun in about 30 seconds!Part Number 52640



DURASAFE™ HAND GUNSSHUT-IN STYLE

DCPxSi-20Part No. 54395

DCPSi-20Part No. 54335

Part Number

Model

5433554395

Rest Type Inlet Connection*Outlet

(Nozzle)Connection in cm

71 18070 177

DCPSi-20DCPxSi-20


20K Port Male20K Port Male

9/16" MP Male9/16" MP Male

lbs kg

12.3 5.611.4 5.2

psi bar

20,000 1,37920,000 1,379

* Adapters available for other connection types. See details on all connection types beginning on page I-2.

** Custom length barrels available. Call factory for information.

C-4




1 51874 HP Nozzle Sleeve2 26635 Collar3 26645 Gland Nut4 52540 Handle Assembly4a 53667 Handle4b 53295 Trigger Assembly4c 26116 Pin5 26689 Capscrew

DURASAFE™ HAND GUNSSHUT-IN STYLEREPLACEMENT PARTS

Related ItemsSHUT-IN REGULATOR VALVE – See Guns, Valves, and Filters, Page C-12ORBI-JET NOZZLES – See Nozzles, Pages E-1 - 5HP NOZZLES – See Nozzles, Page E-6DURASAFE™ SAFETY SHROUD – See Safety, Page G-5

ItemPart

NumberDescription

6 52650 DCPSi-20 Body Assembly54400 DCPxSi-20 Body Assembly

7 52640 CPSi-20 Cartridge8 52543 Cartridge Plug9 53304 Shoulder Stock (DCPSi model only)

10 25296 Nut (DCPSi model only)11 53303 Stud (DCPSi model only)12 50127 Extension (DCPxSi model only)13 50124 Shoulder Stock (DCPxSi model only)14 52040 20K Seal

ItemPart

NumberDescription



Copyright Jetstream of Houston, LLP ©2004C-5

DuraSafe™ 20,000 psi electric hand-operated dump style control guns allowthe operator to have complete controlof the pressure at all times. Designedwith safety, comfort, and simplicity inmind, they are used for a variety ofsurface cleaning applications and areavailable in standard configurations.

. Electric control guns are designedfor units that utilize electric solenoid-operated throttle controls, popular in a handful of older waterblastermodels

. 30 second field replaceable cartridgedesign for minimal downtime

. 48" distance from primary trigger toend of barrel to ensure maximumoperator safety**

. Lightweight

. Fully adjustable body pad for maxi-mum operator comfort in any posi-tion (shoulder, hip, chest, etc.)

. Adjustable secondary grip includedwith model DCPe-20

. Model DCPe-20DD requires bothtriggers to be engaged in order tobuild system pressure for maximumoperator safety

. All pressure-bearing componentsare stainless steel

. Equipped with holder for single noz-zle. Ideal for use with the JetstreamOrbi-Jet self-rotating nozzles

Ergonomically designed body pad helps to reduce fatigueand ensure operator safety. Adjustable for maximumcomfort in any position.

REPLACEMENT CARTRIDGEAll 20,000 psi DuraSafe™ Dump Style Control Guns uti-lize the C-20 cartridge, shown below, to completelyrebuild the dump valve in about 30 seconds!Part Number 51869

DURASAFE™ HAND GUNSELECTRIC DUMP STYLE

DCPe-20DDPart No. 53420

DCPe-20DDPart No. 53370

Body padon chest

Body padon hip

Body padon shoulder


Length** WeightPart Number

Model

5337053420

Trigger Actuation Inlet Connection*

Outlet(Nozzle)

Connection in cm

71 18075 190

DCPe-20DCPe-20DD

SingleDouble

20K Port Male20K Port Male

9/16" MP Male9/16" MP Male

lbs kg

12.3 5.616.7 7.6

psi bar

20,000 1,37920,000 1,379

* Adapters available for other connection types. See details on all connection types beginning on page I-2.

** Custom length barrels available. Call factory for information.




1 51874 HP Nozzle Sleeve2 26635 Collar3 26645 Gland Nut4 53400 Primary Handle Assembly (Both Models)

53260 Secondary Handle Assembly (DCPe-20DD only)4a 53408 Primary Handle (Both Models)

53292 Secondary Handle (DCPe-20DD only)4b 53295 Trigger Assembly4c 26116 Pin5 26689 Capscrew6 26126 Capscrew

DURASAFE™ HAND GUNSELECTRIC DUMP STYLEREPLACEMENT PARTS

Related ItemsORBI-JET NOZZLES – See Nozzles, Pages E-1 - 5HP NOZZLES – See Nozzles, Page E-6DURASAFE™ SAFETY SHROUD – See Safety, Page G-5

ItemPart

NumberDescription

7 25193 O-Ring8 53215 DCPe-20 Body Assembly

53245 DCPe-20DD Body Assembly9 51869 C-20 Cartridge

10 25467 O-Ring11 53175 Cartridge Plug12 53304 Shoulder Stock13 25296 Nut14 53303 Stud15 52040 20K Seal16 53409 Switch Assembly

ItemPart

NumberDescription




Ideal for a variety of waterblast tube cleaning applications,the DCF-20 DuraSafe™ foot-operated dump style controlgun allows the operator to have complete control of thepressure at all times.. 30 second field replaceable cartridge design for minimal

downtime

. Safest gun in the industry! Custom safety cage andthick blast wall protect operator better than any footcontrol gun in the industry

. Specially designed inlet and outlet connections aresuperior to industry standard connections and use areplaceable seal rather than metal to metal contact

. Built in "wings" protect high pressure and fittings fromexternal damage


. Zinc-plated base and cage for corrosion resistance

. Threaded diffuser to route dump water for collection ordisposal

Part Number Model Inlet & Outlet

Connections*

Dimensions (H x W x D)Diffuser Outlet

ConnectionWeight Max. Operating

Pressure

53320 DCF-20 20K Port Female 3/4" NPT Female 7.9 x 14.8 x 12.7 200 x 380 x 320 26.2 11.9 20,000 1,379

* See details on all connection types beginning on page I-2.

1 51864 Diffuser2 51869 C-20 Cartridge3 53369 Body4 26453 Pin5 25261 Capscrew6 53386 Base7 53373 Pedal

ItemPart

NumberDescription

Replacement Parts

DURASAFE™ FOOT GUNSDUMP STYLE

REPLACEMENT CARTRIDGEAll 20,000 psi DuraSafe™ Dump StyleControl Guns utilize the C-20 cartridge,shown below, to completely rebuild the dumpvalve in about 30 seconds!Part Number 51869

in mm lbs kg psi bar

Related ItemsHOSES & LANCES – See Hoses & Lances, Section DROTOMAG PIPE CLEANING NOZZLE – See Nozzles Pages E-7 - 10TUBE CLEANING NOZZLES – See Nozzles, Pages E-12 - 16MULTI-GUN VALVE (MGV) – See Guns, Valves, & Filters, Page C-10 STRAIN RELIEF HOSE – See Safety, Page G-6FLEX LANCE SAFETY GRIP – See Safety, Page G-6




Ideal for a variety of waterblast tube cleaning applications,the DCFSi-20 DuraSafe™ foot-operated shut-in style con-trol gun allows the operator to have complete control ofthe pressure at all times.

. Shut-in style control guns do not dump water when thetrigger is released. Useful in applications where excesswater spillage and disposal are concerns. Use withplunger style pumps such as the UNx™ require theinstallation of a Shut-In Regulator Valve (see page C-12)


. Safest gun in the industry! Custom safety cage andthick blast wall protect operator better than any footcontrol gun in the industry



. Built in "wings" protect high pressure and fittings fromexternal damage

. Zinc-plated base and cage for corrosion resistance

Part Number Model Inlet & Outlet

Connections*

Dimensions (H x W x D) Weight Max. Operating

Pressure

54460 DCFSi-20 20K Port Female 7.9 x 14.8 x 11.3 200 x 380 x 286 25.7 11.7 20,000 1,379


1 52543 Cartridge Plug2 52640 CPSi-20 Cartridge3 54392 Body4 26453 Pin5 25261 Capscrew6 53386 Base7 53373 Pedal

ItemPart

NumberDescription

Replacement Parts

DURASAFE™ FOOT GUNSSHUT-IN STYLE

REPLACEMENT CARTRIDGE20,000 psi DuraSafe™ Shut-in Style ControlGuns utilize the CPSi-20 cartridge, shownbelow, to completely rebuild the gun in about30 seconds!Part Number 52640

in mm lbs kg psi bar

Related ItemsHOSES & LANCES – See Hoses & Lances, Section DROTOMAG PIPE CLEANING NOZZLE - See Nozzles Pages E-7 - 10TUBE CLEANING NOZZLES – See Nozzles, Pages E-12 - 16SHUT-IN REGULATOR VALVE – See Guns, Valves, & Filters, Page C-12STRAIN RELIEF HOSE – See Safety, Page G-6FLEX LANCE SAFETY GRIP – See Safety, Page G-6




The Air-Operated Diverter Valve allows an operator toremotely control pressure in 20,000 psi cleaning applica-tions. When air is sent to the cylinder, the valve closesand allows the system to build pressure. The valve openswhen the air is released, reducing system pressure todrop to near atmospheric. It is especially useful in auto-mated cleaning processes or to reduce operator fatigueby actuating the system pneumatically rather thanmechanically.


. Remote pneumatic operation for reduced operatorfatigue and added convenience and safety


. Heavy duty air cylinder


1 51864 Diffuser2 51869 C-20 Cartridge3 53369 Body4 26453 Pin5 53424 Pusher6 53423 Mounting Plate7 27251 Air Cylinder8 27107 Capscrew9 25796 Hose Fitting

ItemPart

NumberDescription

Replacement Parts

AIR-OPERATED DIVERTER VALVE

REPLACEMENT CARTRIDGEThe 20,000 psi Diverter Valve utilizes the C-20 cartridge, shown below, to completelyrebuild the valve in about 30 seconds!Part Number 51869

Part Number

Inlet & OutletConnections*

Inlet Air Pressure DimensionsMin Max Length Diameter

Dump PortOutlet

Connection

Air InletConnection

WeightMax. Operating

Pressure

53445 20K Port Female 3/4" NPTF 1/8" NPTF 70 4.8 125 8.6 9.9 251 3.1 79 7.7 3.5 20,000 1,379


psi bar psi bar in mm in mm lbs kg psi bar

Related ItemsHOSES – See Hoses & Lances, Page D-1 - 2FITTINGS – See Fittings & Gauges, Section F

Part Number

InletConnection*

DimensionsHeight (H) Width (W) Depth (D)

Outlet(Gun)

Connections*

Outlet(Gauge)

Connections*


Pressure

52190 20K Port Female 20K Port Female 20K Port Female 4.3 109 8.0 203 10.8 275 29 13 20,000 1,379


1 52202 Outlet Adapter2 52201 Diffuser3 26782 O-Ring4 52348 Backup Ring5 26776 O-Ring6 52255 Cartridge7 52206 Manifold8 52076 Plug9 52040 20K Seal

10 50900 Adjuster11 25603 O-Ring12 52221 Adjuster Adapter13 50795 Locking Arm14 25593 Capscrew15 50811 Base16 25700 Capscrew

ItemPart

NumberDescription




The MGV (Multi-Gun Valve) allows two dump style water-blast guns to operate independently when connected toone waterblast pump. The MGV will divide the pump'stotal flow between the guns and will maintain systempressure when either or both guns are dumping.

. Setup using two hand adjustment dials is fast and simple

. Utilizes two valve cartridges that can be easily replaced to completely rebuild the valve in the field in only three minutes


. Zinc-plated base for corrosion resistance


. Additional Multi-Gun Valves can be added a system tofurther increase the number of tools in operation by asingle unit

MULTI-GUN VALVE (MGV)

REPLACEMENT CARTRIDGE

Replacement Parts

in mm in mm in mm lbs kg psi bar




1 27350 Hose Fitting2 54587 Outlet Adapter3 52201 Diffuser4 26782 O-Ring5 54591 Backup Ring6 25229 O-Ring7 52255 Cartridge8 54584 Body9 25603 O-Ring

10 52144 Adjustment Knob11 52040 20K Seal12 52076 Plug13 50795 Locking Arm14 25593 Capscrew15** 52044 Adapter16** 26635 Collar17** 26645 Gland Nut18** 25037 Gauge19** 52486 Base/Cage20** 25700 Capscrew

ItemPart

NumberDescription

A bypass valve diverts a portion of pump flow to a low-pressure outlet and is used on diesel and electric units.For diesel engines, it is used to prevent bogging theengine when using flows at the low end of the pump’scapability. A bypass valve is required on electric units dueto the non-adjustability of motor speed.

. Two minute field-replaceable cartridge design for mini-mal downtime

. Hand adjustment—no wrench needed

. Pump mount model connects to fluid end manifold

. Base mount model connects in-line downstream andincludes a protective cage and a pressure gauge forremote adjustment

. All pressure-bearing components precision machinedfrom stainless steel

. Specially designed inlet connections are superior toindustry standard connections and use a replaceableseal rather than metal to metal contact

Pump Mounted Bypass ValvePart No 54592

Base MountedBypass ValvePart No 52685

BYPASS VALVEHAND ADJUSTABLE


Replacement Parts

Part Number Mounting Style

DimensionsLength Diameter

PressureGauge

Included

Inlet Connections*

Low PressureOutlet

Connection

Weight Max. OperatingPressure

54592 Pump Mount No 20K Port Female 1/2" NPTF 10.0 254 4.5 114 11 5 20,000 1,379

52685 Base Mount Yes 20K Port Female 1/2" NPTF 10.0 254 4.5 79 28 12 20,000 1,379


** Included in base mount model only.

in mm in mm lbs kg psi bar




1 25796 Hose Fitting2 52627 Outlet Adapter3 52664 Backup Ring4 26974 O-Ring5 52725 Cartridge6 52626 Body7 26919 O-Ring8 52700 Adjustment Knob9 52040 20K Seal

10 52076 Plug11 50795 Locking Arm12 25593 Capscrew13** 52044 Adapter14** 26635 Collar15** 26645 Gland Nut16** 25037 Gauge17** 52486 Base/Cage18** 25700 Capscrew

ItemPart

NumberDescription

Required for use with shut-in systems on plunger pumps,the regulator valve maintains constant system pressurewhen operating one or more shut-in guns from a singlepump. When a gun is disengaged, the regulator "senses"the reduction in flow downstream and shifts open justenough to divert water to a low pressure outlet, therebymaintaining pressure for other operators without over-pressurizing the system.

. Two minute field-replaceable cartridge design for mini-mal downtime

. Hand adjustment—no wrench needed

. Pump mount model connects to fluid end manifold

. Base mount model connects in-line downstream andincludes a protective cage and a pressure gauge forremote adjustment


. Specially designed inlet connections are superior toindustry standard connections and use a replaceableseal rather than metal to metal contact

SHUT-IN REGULATOR VALVEHAND ADJUSTABLE

Replacement Parts

Part Number Mounting Style

DimensionsLength Diameter

PressureGauge

Included

Inlet Connections (3)*

Low PressureOutlet

Connection

Weight Max. OperatingPressure

54760 Pump Mounted No 20K Port Female 3/4" NPTF 9.3 235 3.8 95 11 5 20,000 1,379

52720 Base Mounted Yes 20K Port Female 3/4" NPTF 9.3 235 3.8 95 28 12 20,000 1,379


** Included in base mount model only.


Pump Mounted Regulator ValvePart No 54760

Base MountedRegulator ValvePart No 52720





The Nozzle Shut Off Valve (NSOV) is designed for usewith dump style foot guns. The Nozzle Shut Off Valvecompletely stops all water flow to the cleaning nozzle in awaterblast operation while the foot valve is in its dumpmode.

. Allows the operator to freely move the nozzle withoutimpairment of vision caused by sprayback (shownbelow)

. Opens fully for unimpeded flow to the nozzle whenblasting

. Mounts between lance and foot gun (shown at right)


1 52040 20K Seal2 52251 Body3 52624 Valve4 26455 Spring5 26776 O-Ring6 52252 Outlet Adapter

ItemPart

NumberDescription

Replacement Parts

NOZZLE SHUT-OFF VALVENSOV

Part Number Inlet Connection*

DimensionsLength DiameterOutlet Connection*


Pressure

52250 20K Port Male 20K Port Female 4.25 108 1.75 44.5 2 1 20,000 1,379



Related ItemsDURASAFE DUMP STYLE FOOT GUNS – See Guns, Valves, & Filters, Page C-7HOSES & LANCES – See Hoses & Lances, Section DSTRAIN RELIEF HOSE – See Safety, Page G-6

With NSOV Installed Without NSOV Installed




HYDRO-THROTTLE HYDRAULIC THROTTLE CONTROLThe Jetstream Hydro-Throttle is a hydraulic throttle controlthat enables the operator to reduce the engine to idlespeed and relieve the system of high pressure when thegun trigger is released - saving water and fuel and reduc-ing wear on the engine and pump. When the gun is againengaged, the Hydro-Throttle senses the change in pres-sure and increases the engine speed until the pumpreaches the set operating pressure.

. Quick panel or bracket mount installation

. Easy knob adjustments under all operating conditions

. Flexible control cable for quick, easy routing and minimal drag

. Replaceable cartridge for fast field service or conver-sion to another pressure range

. Back-pressure adjustment screw to overcome excessive system back-pressure when control gun is disengaged

. Assemblies include control unit, cartridge, and controlcable to connect to engine throttle. Hydro-Throttlehose, sold below, is needed to connect control unitto pump.

Replacement Parts51963 Hydro-Throttle Cartridge51903 Control Cable, 2 ft. solid wire51903A Control Cable, 5 ft. braided wire52040 20K Seal

Related Items52534-0066467 Hydro-Throttle Hose

52050 2 0.6

52050A 5 1.5

PartNumber

Control CableLength

ft m

Connection Type* (Cartridge)

9/16" JS LanceMale

Control Unit Size

(L x W x H)

in mm


Pressure

lbs kg psi bar

11.7 x 1.75 x 5.6 297 x 44.5 x 142 4 1.8 20,000 1,379

REPLACEMENT CARTRIDGEPart Number 51963





HIGH PRESSURE IN-LINE FILTER

The High Pressure In-Line Water Filter is designed andbuilt for durability and ease of use. It allows water to befiltered after the pump, providing maximum protection forcontrol valves, spin nozzles, and other equipment that canbe damaged by large particles in water.

. Quick and easy filter cartridge style replacement

. Base mounted, permitting the filter to be mounted atthe pump or downstream between hoses

. Pop-out internal relief valve protects the system fromunsafe pressure caused by clogged filters. Resettingthe relief valve simply requires pushing a reset buttonafter the filter has been replaced.

. Includes Jetstream Quick Disconnect Fittings for fastinstallation and removal

. Stainless steel construction

. Filter element not included

PartNumber

Inlet Connection*

OutletConnection*

Dimensions (L x W x H)

in mm


PressureMaximum

Flow

lbs kg

1 51917 QD Male Adapter2 52040 20K Seal3 52589 Body4 27415 Spring5 52705 Relief Valve

26931 5 Micron Filter Element26932 10 Micron Filter Element 26933 25 Micron Filter Element

7 27414 O-Ring8 52588 Cap9 52041 QD Female Adapter10 52599 Base11 26967 Capscrew12 26978 Washer13 25410 Nut

ItemPart

NumberDescription

Replacement Parts

REPLACEMENT FILTER ELEMENT


6

52715 20K QD Male 20K QD Female 11 x 8 x 9.5 279 x 203 x 241 46 21 30 114 20,000 1,379

gpm lpm psi bar




FILTERS

Available for a range of flows to meet all needs, Jetstreamfilters provide the necessary protection to even the mostversatile waterblast system.

. Flows from 12 to 200 gpm (45 to 760 lpm)

. Filter elements from 1 to 75 microns

. Stainless steel and galvanized models available

. Heavy-duty stainless steel baskets

. Ports for pressure gauges

PartNumber Use

gpm lpm inlet Outlet

25865P General Purpose 40 150 1 1/2" 1 1/2" Galvanized 27460 150 10

52735 General Purpose 200 760 2" 1 1/2" Galvanized Included 150 10

99358 General Purpose 200 760 2" 2" Stainless 52704 150 10

27503 Secondary 12 45 1 1/2" 1 1/2" Stainless Included 150 10

Flow Rating Maximum PressureMaterial

Connection (NPT) Stand PartNumber*

psi bar

Filter PartNumber 5 micron 10 micron 25 micron 50 micron 75 micron Lid Gasket Basket Swing Bolt Eye Nut Clevis Pin

25865P 28806 26916 25117 25866 25118 25190 26278B 25865-1 25865-2 25865-3

52735 27688 26765 26766 27497 - 26959 26769 26961P 26962P 26960P

99358 27688S 26765S 26766S 27497S - 26959 26769 99358-1 99358-2 99358-3

Replacement PartsFilter Bags

Filter PartNumber 1 micron 3 micron Lid Gasket

Cartridge Cartridge Swing Bolt Eye Nut Clevis PinRetaining Bolt Retaining Washer

27503 27504 27505 27796 27503-4 27503-5 27503-1 27503-2 27503-3

Replacement PartsFilter Cartridges

Part Number 25865P40 gpm Galvanized Filter

Filter Bag

Part Number 52735200 gpm Galvanized Filter

Part Number 99358200 gpm Stainless Steel Filter

Filter BagFilter Bag

Part Number 27503Cartridge Style Polishing Filter

FilterElement

*If sold separately

Custom AssembliesRubber water blast hoses of lengths other than those above or withdifferent end fittings or cover types are available upon request. Usethe part numbering system below to order the desired assembly:

52534 - LLL AA BB C

Specify Length in Feet (up to 50 ft)Example: "050" for a 50ft long hose

Specify End Fittings by CodeSee End Fitting Codes chart at right. For a hose requiring two different end fittings, codes must be listed in numerical order.

Specify Cover Option by CodeSee cover descriptions and codes at right.Leave blank if no cover is desired.

D-1




RUBBER WATERBLAST HOSESThese high pressure hose assemblies combine rugged construction,dependability, and safe performance at an economical price.. Constructed with four spiral layers of high tensile steel wire plus

one braid of high tensile steel wire. Jetstream hoses feature the exclusive No-Blo® stainless steel end

fitting, still the safest design on the market.. Most assemblies are supplied with a durable braided Cordura®

cover for abrasion resistance. Custom lengths and configurations available below

Part Number Connection Types* Length InsideDiameter

MaximumWorking Pressure

Connection 1 Connection 2 ft m in mm psi bar in mm


Cover OptionsCordura® Cover (Cover Option Code: 4)Constructed of thick, heavy-duty braidednylon, this cover protects the hose from abrasion caused by vibration or moving the hose along a rough surface.

MinimumBend Radius Cover Type*

52534-02563644 20K QD Male 20K QD Female 25 7.6 .50 12.7 20,000 1,379 8 200 Cordura® Cover

52534-05063644 20K QD Male 20K QD Female 50 15.2 .50 12.7 20,000 1,379 8 200 Cordura® Cover

52534-02542424 1" Type "M" Female 1" Type "M" Female 25 7.6 .50 12.7 20,000 1,379 8 200 Cordura® Cover

52534-05042424 1" Type "M" Female 1" Type "M" Female 50 15.2 .50 12.7 20,000 1,379 8 200 Cordura® Cover

52534-0254242 1" Type "M" Female 1" Type "M" Female 25 7.6 .50 12.7 20,000 1,379 8 200 No Cover

52534-0504242 1" Type "M" Female 1" Type "M" Female 50 15.2 .50 12.7 20,000 1,379 8 200 No Cover

Standard Assemblies

Related ItemsFITTINGS – See Section FHOSE CHECKS – See Safety, Page G-6SAFETY SHROUDS & WHIP HOSES – See Safety, Page G-5FLEX LANCE STRAIN RELIEF HOSES – See Safety, Page G-6

Replacements Parts52040 20K Seal (used in 20K QD connection)

1" Type "M" Female 42

20K Quick Disconnect Male 63

20K Quick Disconnect Female 64

3/8" Jetstream Lance Female 66

9/16" Jetstream Lance Female 67

20K Jetstream Port Female 69

Connection Type Fitting Code

End Fitting Codes

Cordura® Cover

D-2


Related ItemsFITTINGS – See Section FHOSE CHECKS – See Safety, Page G-6SAFETY SHROUDS & WHIP HOSES – See Safety, Page G-5FLEX LANCE STRAIN RELIEF HOSES – See Safety, Page Page G-6



THERMOPLASTIC HOSESThese premium hoses provide the most durable and reli-able means of connecting system components.

. Constructed of plastic core reinforced by four or sixspiral layers of high tensile steel wire enclosed in atough, flexible polyamide jacket.

. Smooth plastic core minimizes pressure loss andoffers the maximum resistance to damage caused byaging, moisture absorbtion, and changing environmen-tal factors.

. Stainless steel end fittings with industry standard con-nections.

. Heavy duty vinyl abrasion cover prevents damagecaused by vibration and movement of hose on roughor uneven surfaces (see page D-5 for cover details).

. See pages D-6 - 7 for pressure drop graphs.

. For special lengths, end fittings, or cover options, seecustom order instructions on page D-4.

Part NumberLength Inside

DiameterMax. Operating

PressureMinimum Bend

Radius

29120-02544441 1-5/16" Type "M" Female 25 7.6 .74 18.8 20,300 1,400 13.8 350

29120-05044441 1-5/16" Type "M" Female 50 15.2 .74 18.8 20,300 1,400 13.8 350

29120-02530301 1" MP Tube Nipple 25 7.6 .74 18.8 20,300 1,400 13.8 350

29120-05030301 1" MP Tube Nipple 50 15.2 .74 18.8 20,300 1,400 13.8 350

28347-02542421 1" Type "M" Female 25 7.6 .50 12.8 20,300 1,400 8.0 200

28347-05042421 1" Type "M" Female 50 15.2 .50 12.8 20,300 1,400 8.0 200

28347-02529291 3/4" MP Tube Nipple 25 7.6 .50 12.8 20,300 1,400 8.0 200

28347-05029291 3/4" MP Tube Nipple 50 15.2 .50 12.8 20,300 1,400 8.0 200

28347-02528281 9/16" MP Tube Nipple 25 7.6 .50 12.8 20,300 1,400 8.0 200

28347-05028281 9/16" MP Tube Nipple 50 15.2 .50 12.8 20,300 1,400 8.0 200

53816-02540401 3/4" Type "M" Female 25 7.6 .32 8.0 21,750 1,500 8.0 200

53816-05040401 3/4" Type "M" Female 50 15.2 .32 8.0 21,750 1,500 8.0 200

53816-02528281 9/16" MP Tube Nipple 25 7.6 .32 8.0 21,750 1,500 8.0 200

53816-05028281 9/16" MP Tube Nipple 50 15.2 .32 8.0 21,750 1,500 8.0 200

51954-02539391 9/16" Type "M" Female 25 7.6 .25 6.3 21,750 1,500 7.0 180

51954-05039391 9/16" Type "M" Female 50 15.2 .25 6.3 21,750 1,500 7.0 180

ft m in mm psi bar in mm

* See details on all connection types beginning on page I-2. Medium Pressure (MP) Tube Nipple connections do not include gland nuts and collars.

End Fitting Connections*

D-3




Related ItemsTUBE CLEANING NOZZLES – See Nozzles, Pages E-12 - 16DURASAFE™ FOOT CONTROL GUNS – See Control Guns & Valves, Pages C-7 - 8LANCE FITTINGS AND STINGERS – See Fittings, Pages F-13 - 16FLEX LANCE STRAIN RELIEF HOSES – See Safety, Page G-6FLEX LANCE SAFETY GRIP – See Safety, Page G-6

FLEX LANCESFlex lances are uncovered hoses used for the cleaning of smalldiameter tubes such as those found in heat exchangers, con-densers, and boilers.

. Flex lances have a small minimum bend radius which allowsthem to pass through bends in the tubes

. Constructed of plastic core reinforced by four spiral layers ofhigh tensile steel wire enclosed in a tough, flexible polyamidejacket.

. Smooth plastic core minimizes pressure loss and offers themaximum resistance to damage caused by aging, moistureabsorbtion, and changing environmental factors.

. Stainless steel end fittings.


. Standard lengths are 25, 35, and 50 feet and must be speci-fied in the part number, but special lengths or end fitting com-binations can be ordered using the instructions on page D-4.

Part Number*xxx = length (ft)

InsideDiameter

OutsideDiameter***


MinimumBend

RadiusInlet Side Nozzle Side in mm in mm psi bar in mm

* Specify flex lance length in feet. For example, specify "050" for a fifty foot long flex lance.** See details on end fittings for these assemblies on page D-5 and specifications for all connection types beginning on page I-2*** Outside diameter of end fitting sleeve on nozzle end of flex lance.

End Fitting Connections**

53816-XXX4072 3/4" Type "M" Female 9/16" MP Nozzle Nipple LH .32 8.0 .67 17.0 21,750 1,500 8.0 200

53816-XXX4075 3/4" Type "M" Female 9/16" MP Nozzle Nipple RH .32 8.0 .67 17.0 21,750 1,500 8.0 200

53816-XXX4067 3/4" Type "M" Female 9/16" JS Lance Female .32 8.0 .74 18.8 21,750 1,500 8.0 200

53816-XXX6767 9/16" JS Lance Female 9/16" JS Lance Female .32 8.0 .74 18.8 21,750 1,500 8.0 200













D-4




THERMOPLASTIC HOSES & FLEX LANCESCUSTOM ORDER

All Jetstream 20,000 psi thermoplastic hoses and flexlances are available in custom lengths or with special endfitting combinations or covers. Common lengths and config-urations are available on the two preceding pages. Constructed of plastic core reinforced by four or six spiral

layers of high tensile steel wire enclosed in a tough, flexi-ble polyamide jacket.

. Smooth plastic core minimizes pressure loss and offersthe maximum resistance to damage caused by aging,moisture absorbtion, and changing environmental factors.

. Stainless steel end fittings.


. Use charts and instructions below to build a custom hoseor flex lance

PartNumber

JacketColor

Inside Diameter

(A)

Outside Diameter

(B)

Maximum BurstPressure

Maximum BurstPressure

Minimum BendRadius Weight

29120 Gray .74 18.8 1.24 31.4 50,760 3,500 20,300 1,400 13.8 350 1.29 1.92

28347 Gray .50 12.7 .87 22.0 50,760 3,500 20,300 1,400 8.0 200 .59 .88

53816 Gray .32 8.0 .57 14.6 55,100 3,800 21,750 1,500 8.0 200 .26 .39

51954 Gray .25 6.3 .50 12.7 55,100 3,800 21,750 1,500 7.0 180 .20 .30

51953 Gray .20 5.0 .44 11.2 65,250 4,500 26,100 1,800 6.0 150 .18 .26

51952 Blue .16 4.0 .41 10.4 78,300 5,400 31,320 2,160 5.0 130 .16 .23

in mm in mm psi bar psi bar in mm lbs/ft kg/m

##### - LLL AA BB C

Specify five digit Series Number from chart above (#####)

Insert a dash between the Series Number and length (-)

Specify Length in Feet (up to 500 ft) (LLL)Example: Use "050" for a 50ft long hose or lance.

Specify End Fittings by Code (AA & BB)See End Fittings on the following page to select end fittings. For a hose or lance that has different end fittings, list codes in numerical order.Example: Use "4067" for a hose or lance that has a 3/4" Type "M" Female fitting on one end and a 9/16" Jetstream Lance Female fitting on the other.

Specify Cover Option by Code (C)See Cover Options on the following page.Leave blank if no cover is needed.

* Outside diameter shown is for hose material. For maximum OD, see sleeve diameters listed in charts on the following page.


Copyright Jetstream of Houston, LLP ©2003D-5



END FITTINGSUse the information contained in the charts below toselect the fitting codes for the connection types desired.See specifications for all connection types beginning onpage I-2.

MEDIUM PRESSURE TUBE NIPPLESMale left-hand threaded end fittings designed for connec-tion to other medium pressure fittings and ports using theappropriate gland nuts and collars.

MEDIUM PRESSURE NOZZLE NIPPLESConnect directly to nozzles with female left or right handmedium pressure tube connections.

COVER OPTIONSAbrasion Cover (Cover Option Code: 1)Constructed of clear PVC and reinforced with a rigid spiral coil, theAbrasion Cover helps protect the hose external damage and causedby vibration or movement along rough or uneven surfaces.

Burst Shield Cover (Cover Option Code: 2)Constructed of steel wire reinforced heavy-duty synthetic rubber, theBurst Shield Cover protects the user from hose failure while protectingthe hose from external damage.

TYPE "M" FEMALEHoseSeries

Number

Connection Length(L)

Sleeve OD(D)

Code

in mm in mm

29120 1 5/16" Type "M" (M-21) 44 4.29 109 1.69 42.9

28347 1" Type "M" (M-16) 42 3.70 94 1.16 29.5

53816 3/4" Type "M" (M-12) 40 3.37 86 .80 20.351954 9/16" Type "M" (M-9) 39 2.80 71 .65 16.4

51953 9/16" Type "M" (M-9) 39 2.76 70 .61 15.5

51952 9/16" Type "M" (M-9) 39 2.77 70 .58 14.7

HoseSeries

Number


Sleeve OD(D)

Code

in mm in mm

JETSTREAM LANCE FEMALE

HoseSeries

Number


Sleeve OD(D)

Code

in mm in mm

28347

51953

51952

29120 1" MP Tube LH 30 6.00 152 1.69 42.9

3/4" MP Tube LH 29 5.36 136 1.16 29.5

9/16" MP Tube LH 28 4.67 119 1.16 29.5

53816 9/16" MP Tube LH 28 4.10 104 .80 20.3

51954 3/8" MP Tube LH 27 3.55 90 .65 16.4

9/16" MP Tube LH 28 4.06 103 .61 15.5

3/8" MP Tube LH 27 3.54 90 .61 15.5

1/4" MP Tube LH 26 3.27 83 .61 15.5

3/8" MP Tube LH 27 3.62 92 .58 14.7

1/4" MP Tube LH 26 3.31 84 .58 14.7

53816 9/16" JS Lance Female 67 2.06 52 .74 18.8

51954 3/8" JS Lance Female 66 1.72 44 .62 15.7

51953 3/8" JS Lance Female 66 1.70 43 .57 14.5

51952 1/4" JS Lance Female 65 1.50 38 .50 12.7

HoseSeries

Number

Size Length(L)

Sleeve OD(D)

Code

in mm in mmLH RH

51953

53816 9/16" MP Tube 72 75 2.36 60 .67 17.0

51954 3/8" MP Tube 71 74 2.10 53 .57 14.4

3/8" MP Tube 71 74 2.05 52 .49 12.5

1/4" MP Tube 70 73 1.82 46 .49 12.5

D-6Copyright Jetstream of Houston, LLP ©2004Jetstream of Houston, LLP

Phone (US & Canada): 800-231-8192 or 713-462-7000Web Site: www.waterblast.com


HOSES & FLEX LANCESPRESSURE DROP DATA

SERIES 52534 RUBBER WATERBLAST HOSESee page D-1 for ordering information.

SERIES 29120 THERMOPLASTIC HOSESee pages D-2 and D-4 - 5 for ordering information.

SERIES 28347 THERMOPLASTIC HOSESee pages D-2 and D-4 - 5 for ordering information.

The charts on this page and the next are used to approxi-mate how much pressure will be lost through a particularhose or lance at a given flow rate. Because of frictionalforces, the water exiting a hose or lance could be at a sig-nificantly lower pressure than at entry. In some cases,especially when using smaller hoses and lances such asSeries 51952 & 51953, the flow rate that can be used isdetermined by pressure drop through a lance rather thanthe pump's maximum output.

PRESSURE DROP & NOZZLE SIZINGPressure drop is especially important to understand when sizing nozzles.Use the following procedure for correct nozzle sizing:

1. Determine the pressure needed for a particular cleaning operationand subtract that amount from the desired pump operating pressure.The result is the desired pressure drop.

2. Consult pressure drop chart for the hose to be used to determinewhat flow rate will result in the intended pressure drop.

3a. If this flow rate exceeds the maximum flow of the pump, use the chartto find the pressure drop at the maximum pump flow and subtract thatamount from the desired pump operating pressure to get the pressureat the nozzle. Then use the flow charts provided for the desired noz-zle to select a nozzle, or nozzles, matching the desired flow and pres-sure.

3b. If this flow rate is within the capability of the pump, use the flow chartsprovided for the desired nozzle to select a nozzle, or nozzles, match-ing the desired flow and pressure.

Note: Doubling the length of a hose or lance will result in approximatelytwice the pressure drop at the same flow rate.




HOSES & FLEX LANCESPRESSURE DROP DATA

SERIES 53816 THERMOPLASTIC HOSE & LANCE See pages D-2 - 5 for ordering information.







Related ItemsNIPPLES – See Fittings, Page F-13 for lengths under 2 feet (24 inches).DURASAFE™ FOOT CONTROL GUNS – See Control Guns & Valves, Pages E-7 - 8LANCE FITTINGS AND STINGERS – See Fittings, Pages F-14 - 16

Available Nozzle Types

RIGID LANCES• For use in manual or automatic tube cleaning applications

• Machined from high tensile strength, cold drawn stainless steel

• Three connection types available:

Left Hand Medium Pressure Tubing (MP Tube LH)Can be used with glands and collars or with tube nozzles.Available in 1/4" to 3/4" sizes.

Right Hand Medium Pressure Tubing (MP Tube RH)Available in 1/4" to 3/4" sizes.

Jetstream Lance Connections (JS Lance)Available in 1/4", 3/8", & 9/16" sizes.

• See page pressure drop graphs on the next page

• To order, use five digit part number followed by adash (-) and length in feet (up to 25 ft).

Part Number*xx = length (ft)

OutsideDiameter

OutsideDiameter



Connection Types*

TUBE SPINNINGSee page E-12

DRIL-JETSee page E-13

HPF & HPESee pages E-14 - 15

MP Tube LHConnection

MP Tube RHConnection

JS LanceConnection

Connection 1 (C1) Connection 2 (C2) in mm in mm psi bar

54731-XX 3/4" MP Tube LH 3/4" MP Tube LH .740 18.8 .438 11.1 20,000 1,379

54732-XX 3/4" MP Tube LH 3/4" MP Tube RH .740 18.8 .438 11.1 20,000 1,379

54733-XX 3/4" MP Tube RH 3/4" MP Tube RH .740 18.8 .438 11.1 20,000 1,379



54801-XX 9/16" MP Tube LH 9/16" JS Lance .553 14.0 .312 7.9 20,000 1,379


54803-XX 9/16" MP Tube RH 9/16" JS Lance .553 14.0 .312 7.9 20,000 1,379

51936-XX 9/16" JS Lance 9/16" JS Lance .553 14.0 .312 7.9 20,000 1,379














Related ItemsSTINGERS — See Fittings, Section FSLIM LINE COUPLERS — See Fittings, Section FFITTINGS, CONNECTORS, COUPLINGS — See Fittings, Section FFLEXIBLE HOSES — See Hose, Section C NOZZLES — See Nozzles, Section D



RIGID LANCE PRESSURE DROPSee Page D-6 for information regarding pressure drop.

3/4" RIGID LANCES.740" O.D. x .437" I.D.

9/16" RIGID LANCES .553" O.D. x .312" I.D.

3/8" RIGID LANCES.368" O.D. x .203" I.D.

1/4" RIGID LANCES .245" O.D. x .109" I.D.

lbs kg gpm lpm

E-1

NOZZLES20,000 PSI

The Jetstream Orbi-Jet QCX is a rugged, self-powered, rotat-ing nozzle utilizing up to four straight-pattern, hard-hitting,replaceable nozzles. The nozzle rotor rotates in a 360° patternto provide maximum surface coverage and superior cleaning.

. Each of the four powerful, cohesive, rotating jets follows adifferent cleaning path to provide greater coverage and lessstreaking than a fan tip or single straight nozzle

. Longer straight-flow passages for superior cutting efficiency

. Magnetic braking system controls rotational speed for mini-mal wear and maximum impact without streaking.

. Water provides the rotational motion and creates the bear-ing on which the nozzle spins. No drive belts or ball bear-ings to replace!

. Use with Tungsten carbide OX Series nozzles or sap-phire UHPX Series nozzles

. Light-weight shroud protects nozzle from damageduring operation

. Rebuild kit allows five minute overhaul of wear com-ponents right in the field using two standard hexwrenches

. Retrofit kit available to convert an existing20,000 psi Orbi-Jet to the QCX design




Speed Range

RPM

AssemblyLength

AssemblyWeight

in mm

MaximumOperatingPressure

Maximum FlowRate

(Hand Gun)

psi bar

Related AccessoriesOX NOZZLES - See Nozzles, Page E-2UHPX NOZZLES - See Nozzles, Page E-3DURASAFE™ HAND GUNS – See Guns, Valves,

& Filters, Pages C-1 - 6

Conversion KitIncludes rotor assembly, retainingscrew, and two nozzle port plugs toconvert a standard Orbi-Jet to anOrbi-Jet QCX.. Part No. 54275

AccessoriesNOZZLE EXTENSIONS Extensions are installed into the Orbi-Jet QCXNozzle to provide a wider cleaning patternand serve as flow straighteners, further reduc-ing turbulence for more aggressive waterjets.Part No. 53844 (Sold Individually)

in mm


ORBI-JET QCXFOUR-JET SELF-ROTATING SURFACE CLEANING NOZZLE

Orbi-Jet QCX4 Nozzles,4 Patterns SuperiorCoverage Reduced Streaking

Most Rotating Nozzles2 Nozzles, but only 1 pattern

Diameter(Less Shroud)

54285 9/16" MP Female 1000-1500 2.0 51 3.7 94 2.2 1.0 7.5 28.4 20,000 1,379

N O Z Z L E S20,000 PSI

Jetstream of Houston, LLPPhone:US & Canada:800-231-8192 or 713-462-7000Web Site:www.waterblast.com

Copyright Jetstream of Houston, LLP©2004

E-2

ORBI-JET QCXFOUR-JET SELF-ROTATING SURFA C ECLEANING NOZZLE

Item Part Number Description

1 26762 Retaining Ring

2 52157 Shroud

3 52305 Rebuild Kit(Items 3a to 3g)

4 52172 Body

5 54277 Rotor

6 28435 Straightening Vane

7 53503 Plug

8 53502 Plug Retainer

9 54276 Retaining Screw

Replacement Parts

OX SERIES CARBIDE NOZZLES. High productivity carbide nozzles designed for use in the

Orbi-Jet QCX.

. Specially engineered carbide orifices provide the most aggressive waterjets available

. E fficient design reduces turbulence and orifice wear

. Select nozzles from the charts below by choosing operatingpressure, desired flow, and two or four nozzle operation

WA R N I N G : Flow rates greater than 7.5 gpm(28.4 lpm) are not recommended for use in handgun cleaning operations with an Orbi-Jet QCXdue to excessive thrust.

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)

g p m l p mN o . i n m m

10,000 psi(690 bar)

OXNozzle

Part Number

Four OX Nozzles inOrbi-Jet QCX

Orifice Size

54331 000 .018 .46 4.0 15.0 4.4 16.5 4.7 17.9 5.1 19.1 5.4 20.3

54332 00 .025 .64 7.1 26.9 7.9 29.8 8.6 32.4 9.2 34.8 9.8 37.1

54333 0 .029 .74 9.5 35.8 10.5 39.8 11.5 43.4 12.3 46.7 13.1 49.7

54334 1 .033 .84 11.9 45.1 13.3 50.2 14.5 54.8 15.6 59.0 16.6 62.9

54336 2 .038 .92 15.6 59.1 17.4 65.8 19.0 71.9 20.5 77.5 21.8 82.7

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

OXNozzle

Part Number

Two OX Nozzles inOrbi-Jet QCX

Orifice Size

54331 000 .018 .46 2.3 8.6 2.5 9.4 2.7 10.1 2.8 10.7 3.0 11.3

54332 00 .025 .64 3.9 14.6 4.2 16.0 4.6 17.3 4.9 18.5 5.2 19.7

54333 0 .029 .74 5.0 19.1 5.6 21.0 6.0 22.8 6.5 24.5 6.9 26.0

54334 1 .033 .84 6.3 23.7 6.9 26.2 7.5 28.5 8.1 30.6 8.6 32.6

54336 2 .038 .92 8.1 30.7 9.0 34.0 9.8 37.1 10.5 39.9 11.2 42.5

54337 3 .042 1.01 9.8 37.0 10.9 41.1 11.8 44.8 12.7 48.2 13.6 51.4

54338 4 .046 1.11 11.8 44.8 13.2 49.9 14.4 54.4 15.5 58.6 16.5 62.5

E-3




ORBI-JET QCXF O U R - J E T S E L F - R O TATING SURFACE CLEANING NOZZLE

UHPX SERIES SAPPHIRE NOZZLES. High productivity sapphire nozzles for use in the Orbi-JetQ C X .

. Tapered orifice retainer reduces turbulence and provides acohesive, aggressive waterjet. Sapphire orifices are more durable than carbide

. Select nozzles from the charts below by choosing operatingpressure, desired flow, and two or four nozzle operation

WA R N I N G : Flow rates greater than 7.5 gpm (28.4lpm) are not recommended for use in hand guncleaning operations with an Orbi-Jet QCX due toexcessive thrust.

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

OXNozzle

Part Number

Four UHPX Nozzlesin Orbi-Jet QCX

Orifice Size

53643 18 .018 0.46 3.2 12.1 3.5 13.2 3.8 14.3 4.0 15.2 4.3 16.153877 19 .019 0.48 3.5 13.2 3.8 14.5 4.1 15.7 4.4 16.7 4.7 17.753644 20 .020 0.51 3.8 14.4 4.2 15.8 4.5 17.1 4.8 18.3 5.1 19.4

54017 21 .021 0.53 4.1 15.6 4.5 17.2 4.9 18.6 5.3 19.9 5.6 21.254018 22 .022 0.56 4.5 16.9 4.9 18.7 5.3 20.2 5.7 21.7 6.1 23.053646 23 .023 0.58 4.8 18.3 5.3 20.2 5.8 21.9 6.2 23.5 6.6 24.9

54019 24 .024 0.61 5.2 19.7 5.8 21.8 6.2 23.6 6.7 25.3 7.1 26.9

53647 25 .025 0.64 5.6 21.2 6.2 23.4 6.7 25.4 7.2 27.3 7.7 29.054021 27 .027 0.69 6.4 24.3 7.1 27.0 7.7 29.3 8.3 31.5 8.8 33.554297 28 .028 0.71 6.9 26.0 7.6 28.8 8.3 31.3 8.9 33.7 9.5 35.8

53648 29 .029 0.74 7.3 27.7 8.1 30.7 8.8 33.5 9.5 36.0 10.1 38.354441 30 .030 0.76 7.8 29.5 8.6 32.7 9.4 35.6 10.1 38.3 10.8 40.8

54022 31 .031 0.79 8.3 31.4 9.2 34.8 10.0 37.9 10.8 40.8 11.5 43.453649 33 .033 0.84 9.3 35.2 10.3 39.1 11.3 42.7 12.1 45.9 12.9 48.9

54442 34 .034 0.86 9.8 37.3 10.9 41.4 11.9 45.1 12.8 48.6 13.7 51.8

54443 37 .037 0.94 11.6 43.7 12.8 48.6 14.0 53.0 15.1 57.1 16.1 60.954282 38 .038 0.97 12.2 46.0 13.5 51.2 14.7 55.8 15.9 60.1 16.9 64.154283 42 .042 1.07 14.7 55.7 16.4 62.0 17.9 67.7 19.3 72.9 20.6 77.8

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

OXNozzle

Part Number

Two UHPX Nozzlesin Orbi-Jet QCX

Orifice Size

53647 25 .025 0.64 3.1 11.7 3.4 12.9 3.7 13.9 3.9 14.8 4.1 15.754021 27 .027 0.69 3.5 13.3 3.9 14.6 4.2 15.8 4.5 16.9 4.7 17.954297 28 .028 0.71 3.7 14.1 4.1 15.5 4.4 16.8 4.7 18.0 5.0 19.1

53648 29 .029 0.74 4.0 15.0 4.4 16.5 4.7 17.9 5.1 19.1 5.4 20.354441 30 .030 0.76 4.2 15.9 4.6 17.5 5.0 19.0 5.4 20.3 5.7 21.5

54022 31 .031 0.79 4.4 16.8 4.9 18.5 5.3 20.1 5.7 21.5 6.0 22.853649 33 .033 0.84 5.0 18.8 5.5 20.7 5.9 22.5 6.4 24.1 6.8 25.654442 34 .034 0.86 5.2 19.8 5.8 21.8 6.3 23.7 6.7 25.4 7.1 27.0

54443 37 .037 0.94 6.1 23.0 6.7 25.4 7.3 27.7 7.8 29.7 8.3 31.654282 38 .038 0.97 6.4 24.1 7.1 26.7 7.7 29.0 8.2 31.2 8.8 33.254283 42 .042 1.07 7.7 29.0 8.5 32.1 9.2 35.0 9.9 37.6 10.6 40.054284 46 .046 1.17 9.1 34.3 10.1 38.1 11.0 41.5 11.8 44.7 12.6 47.6

E-4

NOZZLES20,000 PSI



lbs kg gpm lpm

The Jetstream Orbi-Jet is a rugged, self-powered, rotatingnozzle utilizing two straight-pattern, hard-hitting, replaceablenozzles. The nozzle rotor rotates in a 360° pattern to providemaximum surface coverage and superior cleaning.



. Use with Tungsten carbide OR Series nozzles or ORSSeries sapphire nozzles

. Light-weight shroud protects nozzle from damage duringoperation

. Rebuild kit allows five minute overhaul of wear componentsright in the field using two standard hex wrenches


52210 9/16" MP Female 1000-1500 2.1 54 3.6 92 2.3 1.0 7.5 28.4 20,000 1,379

Speed Range

RPM

AssemblyLength

AssemblyWeight

in mm


Maximum FlowRate

(Hand Gun)

psi bar

Related AccessoriesOR NOZZLES – See Nozzles, Page E-5ORS NOZZLES – See Nozzles, Page E-5DURASAFE™ HAND GUNS – See Guns, Valves, & Filters, Pages C-1 - 6

AccessoriesNOZZLE EXTENSIONS Extensions are installed into the Orbi-Jet Nozzle to provide a wider cleaning pattern and serve as flow straighteners, further reducing turbulence for more aggressive waterjets. Part No. 52320-05 (Sold Individually)

in mm


ORBI-JETTWO-JET SELF-ROTATING SURFACE CLEANING NOZZLE


IMPACT + COVERAGE = ORBIJET

E-5Jetstream of Houston, LLPPhone:US & Canada:800-231-8192 or 713-462-7000Web Site:www.waterblast.com



O R B I - J E TTWO-JET SELF-ROTATING SURFA C ECLEANING NOZZLE



2 52157 Shroud


4 52172 Body

5 52173 Rotor

6 26871 Straightening Vane

7 52158 Retaining Screw

Replacement Parts

CARBIDE NOZZLES - OR. Precision honed carbide orifice. Designed for use with the Orbi-Jet. Other sizes available upon request

WA R N I N G : Flow rates greaterthan 7.5 gpm (28.4 lpm) are notrecommended for use in handgun cleaning operations with anOrbi-Jet due to excessive thrust.

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

OXNozzle

Part Number

Two OR Nozzlesin Orbi-Jet

Orifice Size

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

OXNozzle

Part Number

Two ORS Nozzlesin Orbi-Jet

Orifice Size

52738 00 .025 .64 3.1 11.7 3.4 12.9 3.7 13.9 3.9 14.8 4.1 15.7

52739 0 .029 .74 4.0 15.0 4.4 16.5 4.7 17.9 5.1 19.1 5.4 20.3

52741 1 .033 .84 5.0 18.8 5.5 20.7 5.9 22.5 6.4 24.1 6.8 25.6

52742 2 .038 .92 6.4 24.1 7.1 26.7 7.7 29.0 8.2 31.2 8.8 33.2

52743 3 .042 1.01 7.7 29.0 8.5 32.1 9.2 35.0 9.9 37.6 10.6 40.0

52744 4 .046 1.11 9.1 34.3 10.1 38.1 11.0 41.5 11.8 44.7 12.6 47.6

52746 5 .052 1.32 11.4 43.2 12.7 48.0 13.8 52.4 14.9 56.4 15.9 60.2

SAPPHIRE NOZZLES - ORS. More durable than carbide. Designed for use with the Orbi-Jet. Other sizes available upon request

WA R N I N G : Flow rates greaterthan 7.5 gpm (28.4 lpm) are notrecommended for use in handgun cleaning operations with anOrbi-Jet due to excessive thrust.

52686 00 .025 .74 3.6 13.6 4.0 15.0 4.3 16.2 4.6 17.3 4.8 18.3

52211 0 .029 .84 4.6 17.6 5.1 19.4 5.5 21.0 5.9 22.5 6.3 23.9

52212 1 .033 .92 5.8 22.1 6.4 24.4 7.0 26.5 7.5 28.4 8.0 30.3

52213 2 .038 1.01 7.5 28.5 8.3 31.6 9.1 34.4 9.8 37.0 10.4 39.4

52214 3 .042 1.11 9.1 34.3 10.1 38.1 11.0 41.5 11.8 44.7 12.6 47.6

52215 4 .046 1.32 10.8 40.7 12.0 45.3 13.0 49.4 14.0 53.1 15.0 56.6

52216 5 .055 1.40 15.1 57.2 16.8 63.7 18.4 69.6 19.8 75.0 21.1 80.0

H P Series Nozzles nozzles produce well defined, hard hittingjets for concentrated, work saving cleaning power.

. Available with sapphire or carbide orifices. Attach directly to the end of any control gun or nipple thatuses a 9/16" medium pressure male connection

. 20,000 psi (1,379 bar) maximum working pressure

CARBIDE NOZZLES - HP0 & HP15. Precision honed tungsten carbide inserts for long

service life. HP0 Series straight pattern nozzles produce highly

cohesive, powerful waterjets. HP15 Series fan pattern nozzles create wide waterjets withoutsignificant reduction in power

E-6




H P N O Z Z L E SS U R FACE CLEANING NOZZLES

WARNING: Flow rates greater than 7 gpm (28.4 lpm) are not recommended for use in handgun cleaning operations due to excessive thrust.

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

H P S 0Nozzle

Part Number

HPS0 - Straight Jet Orifice Size

g p m l p m

20,000 psi(1,379 bar)

g p m l p m

17,500 psi(1,207 bar)

g p m l p m

15,000 psi(1,034 bar)

g p m l p m

12,500 psi(862 bar)


10,000 psi(690 bar)

HP0Nozzle

P a r tN u m b e r

HP15Nozzle

P a r tN u m b e r

HP0 - Straight Jet Orifice Size

54881 000 .018 0.46 0.7 2.5 0.7 2.7 0.8 3.0 0.9 3.2 0.9 3.554882 00 .025 0.64 1.3 4.7 1.4 5.3 1.5 5.8 1.7 6.3 1.8 6.754883 0 .029 0.74 1.7 6.4 1.9 7.1 2.1 7.8 2.2 8.4 2.4 9.052747 1 .033 0.84 2.2 8.2 2.4 9.2 2.7 10.1 2.9 10.9 3.1 11.7

52748 2 .038 0.97 2.9 10.9 3.2 12.2 3.5 13.4 3.8 14.5 4.1 15.552749 3 .042 1.07 3.5 13.4 3.9 14.9 4.3 16.4 4.7 17.7 5.0 18.9

52751 4 .046 1.17 4.2 16.0 4.7 17.9 5.2 19.6 5.6 21.2 6.0 22.752752 5 .052 1.32 5.4 20.5 6.0 22.9 6.6 25.1 7.2 27.1 7.7 29.0

54868 ** 000 .018 0.46 0.8 2.9 0.9 3.3 1.0 3.6 1.0 3.9 1.1 4.254869 ** 00 .025 0.64 1.5 5.7 1.7 6.4 1.8 7.0 2.0 7.5 2.1 8.051978 54874 0 .029 0.74 2.0 7.6 2.3 8.5 2.5 9.4 2.7 10.1 2.9 10.851979 ** 1 .033 0.84 2.6 9.9 2.9 11.1 3.2 12.1 3.5 13.1 3.7 14.051980 53204 2 .038 0.97 3.5 13.1 3.9 14.7 4.2 16.1 4.6 17.4 4.9 18.651981 53205 3 .042 1.07 4.2 16.0 4.7 17.9 5.2 19.6 5.6 21.2 6.0 22.751982 53206 4 .046 1.17 5.1 19.2 5.7 21.5 6.2 23.5 6.7 25.4 7.2 27.251983 53207 5 .055 1.40 7.3 27.5 8.1 30.7 8.9 33.7 9.6 36.4 10.3 38.951984 53331 6 .063 1.60 9.5 36.1 10.7 40.3 11.7 44.2 12.6 47.7 13.5 51.051985 54876 7 .067 1.70 10.8 40.8 12.1 45.6 13.2 49.9 14.3 53.9 15.2 57.751986 54877 8 .070 1.78 11.8 44.5 13.2 49.8 14.4 54.5 15.6 58.9 16.6 63.051987 54878 9 .073 1.85 12.8 48.4 14.3 54.1 15.7 59.3 16.9 64.0 18.1 68.554871 54879 10 .078 1.98 14.6 55.3 16.3 61.8 17.9 67.7 19.3 73.1 20.7 78.2

** Not Available

HP15 - 15˚ Fan Jet

SAPPHIRE NOZZLES - HPS0. More durable than tungsten carbide for

longer service life and lower operating cost

WA R N I N G : Flow rates greater than 7 gpm(28.4 lpm) are not recommended for use inhand gun cleaning operations due toexcessive thrust.

E-7

NOZZLES 20,000 PSI



lbs kg gpm lpm


54530 3/4" MP Female 50-300 2.75 70 7.38 187 6 2.7 50 189 20,000 1,379

Speed Range

RPM

AssemblyLength

AssemblyWeight

in mm


Maximum FlowRate

(Hand Gun)

psi barin mm


ROTOMAG2-D PIPE CLEANING NOZZLE


The Jetstream Rotomag is a self-powered rotating nozzledesigned for cleaning stacks, sewer lines, drains, tanks, on-line boilers, and other large diameter pipes.

. Two ports at each of three nozzle angles can be used inany combination: 45° forward, 45° rearward, and radial


. Flush mounted nozzle inserts provide low profile for clean-ing small pipes while extensions are available for largerpipes, allowing the Rotomag to clean pipes ranging from 31/2 inches to 18 feet in diameter


. Uses up to six flush mounted RM Series tungsten carbidenozzles or RMS Series sapphire nozzles

. Rebuild kit allows five minute replacement of wear compo-nents right in the field using a two standard hex wrenches

. Includes four nozzle port plugs for two jet cleaning

Replacement PartsItem Part Number Description


2 52803 Shroud


4 54452 Body

5 52310 Rotor

6 52390 Plug

6a 26759 O-Ring

7 52386 Tow Ring

7a 26869 Setscrew

E-8

NOZZLES20,000 PSI



ROTOMAG2-D PIPE CLEANING NOZZLEACCESSORIES

NOZZLE EXTENSIONS. Available in three sizes and can be coupled

. Puts nozzles closer to the inner surface oflarge pipes for more effective cleaning

CENTRALIZERS. Several models are available for a variety of applications

. Required for use of extensions in horizontal pipe runs

. Used with the the Rotomag to provide even, thoroughcleaning and ease of movement

Six Wheel Adjustable. Collapsible aluminum frame

. For straight pipe runs

. Durable plastic wheels

. Holds short rigid lance for nozzle and hose attachment

Eight Wheel Adjustable. Zinc plated welded steel frame

. Handles bends in pipe runs

. Durable plastic wheels

. Holds short rigid lance for nozzle and hose attachment

BACKOUT PREVENTERSBackout preventers are safety devices that mountto pipe flanges to prevent the Rotomag from back-ing out in the event of an unexpected and suddenshift in thrust that could result in injury to operators.Fits around hoses from 1/4" to 1" I.D.

NOZZLE PLUGSUsed to close unusedRotomag nozzle ports. Part Number 52390

Replacement Part26759 O-Ring

in mm in mm in mm

Diameter“A”

Diameter“B”

Diameter“C”

52320-05 5.0 127 4.3 109 4.3 109

52320-10 10.0 254 7.9 201 7.8 198

52320-15 15.0 381 11.4 290 11.3 287

Replacement Parts

in cm lbs kg

Pipe Diameter Range Weight

29121 3/4" MP Male 9 - 18 23-45 13 5.9

29122 3/4" MP Male 13 - 37 33 - 94 23 10.4

29123 3/4" MP Male 20 - 60 51 - 152 34 15.4

in mm

Flange Bolt CircleDiameter Range

29124 5 - 15 13 - 38

54805 5 - 36 13 - 91

in cm lbs kg

Pipe Diameter Range Weight

* Requires 3/4"MP rigid lance, series 54731. See page D-8.

* Requires 3/4"MP rigid lance, series 54731. See page D-8.

Part Number

Part Number

Part Number

Part Number



29125 3/4" MP Male 17 - 21 43 - 53 15 6.8

29126 3/4" MP Male 22 - 29 56 - 74 26 11.8

29127 3/4" MP Male 30 - 37 76 - 94 31 14.0

29128 3/4" MP Male 42 - 64 106 - 163 50 22.7

NOZZLES 20,000 PSI



E-9


RM SERIES CARBIDE NOZZLES. High productivity carbide nozzles designed for use in the Rotomag. Precision honed carbide orifices. Low profile design mounts flush with the outside diameter of the

Rotomag. Select nozzles from the charts below by choosing operating pres-

sure, desired flow, and two, four, or six nozzle operation

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RM Nozzle

Part Number

Six RM Nozzlesin RotoMag

Orifice Size

52689 000 .018 .46 6.2 23.3 6.7 25.4 7.2 27.3 7.7 29.0 8.1 30.752688 00 .025 .64 10.5 39.7 11.6 43.8 12.5 47.4 13.4 50.7 14.2 53.952452 0 .029 .74 13.6 51.5 15.0 56.9 16.3 61.8 17.5 66.3 18.6 70.552453 1 .033 .84 17.2 65.0 19.0 72.0 20.7 78.4 22.2 84.2 23.7 89.652454 2 .038 .92 22.3 84.4 24.7 93.7 27.0 102.1 29.0 109.8 30.9 117.052456 3 .042 1.01 26.9 101.8 29.9 113.2 32.6 123.4 35.1 132.9 37.4 141.652457 4 .046 1.17 32.0 121.0 35.6 134.6 38.8 146.9 41.8 158.2 44.6 168.8

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RM Nozzle

Part Number

Four RM Nozzlesin RotoMag

Orifice Size

52688 00 .025 .64 7.5 28.4 8.2 31.1 8.8 33.5 9.4 35.7 10.0 37.852452 0 .029 .74 9.6 36.2 10.5 39.8 11.4 43.1 12.2 46.1 12.9 48.952453 1 .033 .84 12.0 45.2 13.2 49.9 14.3 54.1 15.3 58.0 16.3 61.652454 2 .038 .92 15.4 58.1 17.0 64.3 18.5 69.9 19.8 75.1 21.1 79.952456 3 .042 1.01 18.4 69.8 20.4 77.3 22.2 84.2 23.9 90.5 25.4 96.352457 4 .046 1.17 21.8 82.6 24.2 91.6 26.4 99.8 28.4 107.4 30.2 114.452458 5 .055 1.40 30.5 115.6 34.0 128.6 37.1 140.3 39.9 151.1 42.6 161.152459 6 .063 1.59 38.4 145.4 42.8 161.8 46.7 176.7 50.3 190.5 53.7 203.2

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RM Nozzle

Part Number

Two RM Nozzlesin RotoMag

Orifice Size

52452 0 .029 .74 5.5 21.0 6.0 22.8 6.4 24.4 6.8 25.9 7.2 27.352453 1 .033 .84 6.7 25.5 7.3 27.8 7.9 29.9 8.4 31.9 8.9 33.752454 2 .038 .92 8.4 31.9 9.2 35.0 10.0 37.8 10.7 40.4 11.3 42.852456 3 .042 1.01 10.0 37.7 11.0 41.5 11.9 44.9 12.7 48.1 13.5 51.052457 4 .046 1.17 11.7 44.1 12.9 48.7 13.9 52.8 14.9 56.5 15.9 60.052458 5 .055 1.40 16.0 60.6 17.7 67.1 19.3 73.0 20.7 78.4 22.0 83.452459 6 .063 1.59 20.0 75.5 22.1 83.8 24.1 91.2 25.9 98.1 27.6 104.452461 7 .067 1.70 23.0 87.2 25.6 96.9 27.9 105.6 30.0 113.6 32.0 121.052462 8 .070 1.78 25.0 94.7 27.8 105.2 30.3 114.7 32.6 123.4 34.8 131.652463 9 .073 1.85 27.1 102.5 30.1 113.9 32.8 124.3 35.3 133.8 37.7 142.652464 10 .078 1.98 30.7 116.2 34.2 129.3 37.3 141.1 40.1 151.9 42.8 162.052466 12 .081 2.06 33.0 124.9 36.7 138.9 40.1 151.7 43.2 163.4 46.0 174.352467 14 .089 2.26 39.5 149.6 44.0 166.6 48.1 181.9 51.8 196.1 55.3 209.2

NOZZLES 20,000 PSI



E-10


RMS SERIES SAPPHIRE NOZZLES. High productivity sapphire nozzles designed for use in

the Rotomag

. More durable than tungsten carbide for longer servicelife and lower operating cost

. Low profile design mounts flush with the outside diame-ter of the Rotomag

. Select nozzles from the charts below by choosing oper-ating pressure, desired flow, and two, four, or six nozzleoperation

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RMSNozzle

Part Number

Six RMS Nozzlesin RotoMag

Orifice Size

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RMSNozzle

Part Number

Four RMS Nozzlesin RotoMag

Orifice Size

54886 00 .025 0.64 6.5 24.6 7.1 26.8 7.6 28.9 8.1 30.7 8.6 32.452731 0 .029 0.74 8.2 31.1 9.0 34.1 9.7 36.9 10.4 39.4 11.0 41.752732 1 .033 0.84 10.2 38.7 11.2 42.5 12.2 46.1 13.0 49.3 13.8 52.352733 2 .038 0.97 13.1 49.4 14.4 54.6 15.6 59.2 16.8 63.5 17.8 67.552734 3 .042 1.07 15.6 59.1 17.3 65.4 18.8 71.1 20.2 76.3 21.5 81.252736 4 .046 1.17 18.4 69.7 20.4 77.3 22.2 84.1 23.9 90.4 25.4 96.352737 5 .052 1.32 23.1 87.6 25.7 97.2 28.0 106.0 30.1 114.0 32.1 121.5

54884 000 .018 0.46 5.4 20.4 5.8 22.1 6.3 23.7 6.6 25.1 7.0 26.554886 00 .025 0.64 9.0 34.1 9.9 37.4 10.7 40.4 11.4 43.2 12.1 45.852731 0 .029 0.74 11.6 43.9 12.8 48.4 13.9 52.5 14.9 56.2 15.8 59.752732 1 .033 0.84 14.6 55.1 16.1 61.0 17.5 66.3 18.8 71.1 20.0 75.652733 2 .038 0.97 18.8 71.3 20.9 79.0 22.7 86.0 24.4 92.4 26.0 98.452734 3 .042 1.07 22.7 85.8 25.2 95.3 27.4 103.8 29.5 111.7 31.4 119.052736 4 .046 1.17 26.9 101.8 29.9 113.1 32.6 123.4 35.1 132.8 37.4 141.652737 5 .052 1.32 33.9 128.5 37.8 143.0 41.2 156.1 44.4 168.1 47.4 179.4

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RMSNozzle

Part Number

Two RMS Nozzlesin RotoMag

Orifice Size

52732 1 .033 .84 5.9 22.2 6.4 24.1 6.8 25.9 7.3 27.5 7.7 29.052733 2 .038 .92 7.3 27.5 8.0 30.1 8.6 32.5 9.1 34.6 9.7 36.652734 3 .042 1.01 8.6 32.4 9.4 35.5 10.1 38.4 10.8 41.0 11.5 43.452736 4 .046 1.17 10.0 37.7 11.0 41.5 11.9 44.9 12.7 48.1 13.5 51.052737 5 .052 1.32 12.3 46.6 13.6 51.4 14.7 55.8 15.8 59.8 16.8 63.6

NOZZLES 20,000 PSI



E-11

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RMSNozzle

Part Number

Orifice Size

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

RMNozzle

Part Number

Orifice Size

52689 000 .018 0.46 0.8 2.9 0.9 3.3 1.0 3.6 1.0 3.9 1.1 4.2

52688 00 .025 0.64 1.5 5.7 1.7 6.3 1.8 7.0 2.0 7.5 2.1 8.052452 0 .029 0.74 2.0 7.6 2.3 8.5 2.5 9.4 2.7 10.1 2.9 10.852453 1 .033 0.84 2.6 9.9 2.9 11.1 3.2 12.1 3.5 13.1 3.7 14.052454 2 .038 0.97 3.5 13.1 3.9 14.7 4.2 16.1 4.6 17.4 4.9 18.652456 3 .042 1.07 4.2 16.0 4.7 17.9 5.2 19.6 5.6 21.2 6.0 22.7

52457 4 .046 1.17 5.1 19.2 5.7 21.5 6.2 23.5 6.7 25.4 7.2 27.2

54884 000 .018 0.46 0.6 2.5 0.7 2.7 0.8 3.0 0.9 3.2 0.9 3.554886 00 .025 0.64 1.3 4.7 1.4 5.3 1.5 5.8 1.7 6.3 1.8 6.752731 0 .029 0.74 1.7 6.4 1.9 7.1 2.1 7.8 2.2 8.4 2.4 9.052732 1 .033 0.84 2.2 8.2 2.4 9.2 2.7 10.1 2.9 10.9 3.1 11.752733 2 .038 0.97 2.9 10.9 3.2 12.2 3.5 13.4 3.8 14.5 4.1 15.552734 3 .042 1.07 3.5 13.4 3.9 14.9 4.3 16.4 4.7 17.7 5.0 18.952736 4 .046 1.17 4.2 16.0 4.7 17.9 5.2 19.6 5.6 21.2 6.0 22.752737 5 .052 1.32 5.4 20.5 6.0 22.9 6.6 25.1 7.2 27.1 7.6 28.9

Related ItemsCENTRALIZERS – See Nozzles, Page E-8NOZZLE EXTENSIONS – See Nozzles, Page E-8NOZZLE PLUGS – See Nozzles, Page E-8

Part Number

Inlet Connection*

Part No. 52644 Part No. 54887

NozzleInsert Type Jet Configuration

Max. OperatingPressureLength Diameter


. Two models available

. Uses up to sixteen flush mounted RM Series tungstencarbide nozzles or RMS Series sapphire nozzles

. Flush mounted nozzle inserts provide low profile forcleaning small pipes while extensions are available forlarger pipes

. Heat treated stainless steel

RM NOZZLES. Carbide orifice. Flow rates shown are

for a single RM nozzle.Multiply by the numberof nozzles to be usedfor total flow

RMS NOZZLES. Sapphire orifice. Flow rates shown are

for a single RMS noz-zle. Multiply by thenumber of nozzles tobe used for total flow

PIPE CLEANING NOZZLES

in mm psi barin mm

52644 20K Port Female RM/RMS 1 Front, 3 Forward (45°), 5 Back (45°) 2.0 51 3.25 83 20,000 1,379

54887 3/4" MP Female RM/RMS 1 Front, 3 Forward (45°), 6 Radial, 6 Back (45°) 2.75 70 3.75 95 20,000 1,379

Replacement Spin SleevesNozzle sleevescan be replacedwhen orifices areworn or when adifferent flow rateis needed. Seemain chart abovefor flow data.

51956 1 1/4" JS Lance

51958 1 3/8" JS Lance

52551 1

54256 2

NOZZLES 20,000 PSI



E-12

Jetstream Tube Spinner Nozzles provide the mostthorough cleaning of tube walls. Maximum impactand the elimination of streaking result from having two largerspinning jets rather than several smaller,non-rotating jets.. Self-rotating sleeve has two radial jets that spin at high speed

for complete coverage. Simple two piece design features a nozzle body, specially

coated for maximum lubricity and surface hardness, and astainless steel sleeve, hardened to extend orifice life and pre-cision honed to prevent galling

. A thin layer of water between the nozzle body and sleeveprovides a liquid bearing on which the sleeve spins. No ballbearings to replace!

. HPF or HPE tube cleaning nozzles are connected to the tubespinner nozzle to add forward jets for unplugging tubesand/or rearward jets to pull nozzles and flex lance throughtube (sold separately)

. HPF nozzle blanks, sold below, can be installed in place ofHPF or HPE nozzles when no forward or rearward jets arerequired

. Tube Spinner outside diameters are the same as standardtube cleaning nozzles

. Custom flow rates available for special applications

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmin mm

10,000 psi(690 bar)

InletConnection*

(Female)

Length(with HPF nozzle)

TUBE SPINNERTUBE CLEANING NOZZLES

Related ItemsHPF NOZZLES – See Nozzles, Page E-14HPE NOZZLES – See Nozzles, Page E-15FLEX LANCES – See Hoses & Lances, Page D-3RIGID LANCES – See Hoses & Lances, Page D-8FLEX LANCE SAFETY GRIP – See Safety, Page G-5DURASAFE™ FOOT GUNS – See Guns, Valves, & Filters, Pages C-7 & 8

HPF Nozzle BlanksEach spin nozzle requires eithera tube nozzle (see RelatedItems below) or a nozzle blank(no drilled orifices) to be installedon the end of nozzle body.

51937 1/4" JS Lance

51938 3/8" JS Lance

51939 9/16" JS Lance

HPF BlankPart

Number

Connection Type

SleevePart

Number

Nozzle Size

Nozzle Part

Number

FlowRateNo.

OutsideDiameter

in mm

9/16" JS Lance .750 19.1 3.74 95.0

FlowRateNo.

9/16" JS Lance

Nozzles shown actual size. Cap nozzles sold separately


52018 1 1/4" JS Lance .375 9.5 2.40 61.0 2.3 8.7 2.7 10.1 2.0 7.7 3.4 13.0 3.8 14.3

52021 1 3/8" JS Lance .500 12.7 2.76 70.1 3.3 12.5 3.9 14.8 4.5 17.0 5.1 19.4 5.7 21.7

52548 1 4.5 17.1 5.5 20.6 6.4 24.3 7.4 28.2 8.5 32.1

54258 2 8.8 33.4 10.3 38.9 11.7 44.3 13.1 49.8 14.6 55.2

NOZZLES 20,000 PSI



E-13

Dril-Jet Tube Cleaning Nozzles are specially designed for clean-ing plugged tubes. An internal rotor features two spinning frontjets to drill through tube blockages while non-rotating rear jetsflush debris and generate thrust to pull nozzle and lancethrough tube.. No external moving parts. A thin layer of water between the nozzle body and rotor pro-

vides a liquid bearing on which the sleeve spins. No ballbearings to replace!

. Precisely ground rotor and precision honed nozzle body areboth made from stainless steel and hardened for maximumlife and reliability

. Dril-Jet outside diameters are the same as standard tubecleaning nozzles

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmin mm

10,000 psi(690 bar)Inlet Connection*

(Female)Overall Length

DRIL-JETTUBE CLEANING NOZZLES

Nozzle Part

Number

OutsideDiameter

in mm

52860 3/8" JS Lance .50 12.7 2.22 56.4 3.3 12.6 3.8 14.3 4.2 15.8 4.6 17.3 4.9 18.7

52935 9/16" JS Lance .75 19.1 3.04 77.2 10.3 38.9 11.4 43.2 12.5 47.2 13.3 50.2 14.2 53.9

Nozzles shownactual size

Related ItemsFLEX LANCES – See Hoses & Lances, Page D-3RIGID LANCES – See Hoses & Lances, Page D-8FLEX LANCE SAFETY GRIP – See Safety, Page G-5DURASAFE™ FOOT GUNS – See Guns, Valves, & Filters, Pages C-7 & 8JETSTREAM LANCE FITTINGS – See Fittings & Gauges, Pages F-13 - 16

Replacement Parts

3/8" Dril-Jet 9/16" Dril-Jet

Item Description Part Numbers

1 Cap 53113 53169

2 Body 52847 52956

3 Rotor 52853 52954

4 O-Ring 27112 27187

5 O-Ring 27111 26053

6 Thruster 52856 52953


HPF L 3 4 - 7

NOZZLE SERIES

THREADSL = Left hand medium

pressure threadsOmit for right hand Jetstream lance threads

SIZE1 = 1/4" Threads2 = 3/8" Threads3 = 9/16" Threads

PATTERNSpecify number corresponding to desired pattern from chart above

FLOW RATINGSee chart at right. Example, a flow rating numberof 7 will flow 10.7 gpm (40.6 lpm) at 16,000 psi(1,103 bar).

NOZZLES 20,000 PSI



E-14

. Designed for use with flex or rigid lances

. HPF nozzles feature right-hand threadedfemale Jetstream Lance connections

. HPFL nozzles feature left-hand femalemedium pressure tube connections

. Recessed orifices provide protection from surface abrasion that could distortwaterjets

. Both series have three sizes with six patterns each and fourteen flow ratings to choose

. Custom patterns and flows available

HPF TUBE CLEANING NOZZLES

Ordering HPF Nozzles Nozzle Flow Rating

Nozzles shown actual size

HPF3 & HPFL3

HPF2 & HPFL2

HPF1 & HPFL1

gpm lpm gpm lpm

18,000 psi(1,241 bar)

20,000 psi(1,379 bar)

gpm lpm

16,000 psi(1,103 bar)

gpm lpm

14,000 psi(965 bar)

gpm lpm

12,000 psi(827 bar)

gpm lpm

10,000 psi(690 bar)

FlowRateNo.

1 Front6 Back

1 Front8 Back

1 Front3 Forward

6 Back

1 Front3 Forward

8 Back

3 Forward3 Radial6 Back

1 Front3 Radial6 Back

1 Front6 Back

1 Front8 Back

1 Front3 Forward

6 Back

1 Front3 Forward

8 Back



HPF1 1/4" JS Lance .88 22.4

HPFL1 1/4" MP Tube LH .71 18.0

HPF2 3/8" JS Lance 1.05 26.7

HPFL2 3/8" MP Tube LH .87 22.1

HPF3 9/16" JS Lance 1.28 32.5

HPFL3 9/16" MP Tube LH 1.15 29.2

2Inlet

Connection*(Female)

OutsideDiameter

Nozzle Part

Number

Nozzle Specification Patterns - Number of Jets by Location

Overall Length

in mm

.375 9.5

.50 12.7

.75 19.1

in mm

1 Front8 Back

1 Front12 Back

1 Front3 Forward

8 Back

1 Front3 Forward12 Back



* See details on all connection types beginning on page I-2. ** For use with rigid lances only.

1 3 4 5** 6

2 2.7 10.3 3.0 11.3 3.2 12.2 3.5 13.1 3.7 13.9 3.9 14.63 3.3 12.6 3.7 13.8 3.9 14.9 4.2 16.0 4.5 16.9 4.7 17.84 4.1 15.5 4.5 16.9 4.8 18.3 5.2 19.6 5.5 20.8 5.8 21.95 5.7 21.6 6.3 23.7 6.8 25.6 7.2 27.4 7.7 29.0 8.1 30.66 7.4 27.9 8.1 30.6 8.7 33.1 9.3 35.3 9.9 37.5 10.4 39.57 8.5 32.1 9.3 35.2 10.0 38.0 10.7 40.6 11.4 43.1 12.0 45.48 9.3 35.1 10.1 38.4 11.0 41.5 11.7 44.3 12.4 47.0 13.1 49.69 10.1 38.1 11.0 41.8 11.9 45.1 12.7 48.2 13.5 51.1 14.2 53.9

10 11.5 43.5 12.6 47.7 13.6 51.5 14.5 55.1 15.4 58.4 16.3 61.612 12.4 46.9 13.6 51.4 14.7 55.5 15.7 59.4 16.6 63.0 17.5 66.414 15.0 56.7 16.4 62.1 17.7 67.0 18.9 71.7 20.1 76.0 21.2 80.115 16.3 61.9 17.9 67.8 19.3 73.2 20.7 78.3 21.9 83.0 23.1 87.520 22.9 86.6 25.1 94.8 27.1 102.4 28.9 109.5 30.7 116.1 32.3 122.440 29.5 111.8 32.3 122.4 34.9 132.3 37.4 141.4 39.6 150.0 41.8 158.1

NOZZLES 20,000 PSI



E-15

HPE L 3 4 - 7

NOZZLE SERIES

THREADSL = Left hand medium

pressure threadsOmit for right hand Jetstream lance threads



FLOW RATINGSee chart at right. Example, a flow rating numberof 7 will flow 10.7 gpm (40.6 lpm) at 16,000 psi(1,103 bar).

1 Front2 Forward2 Radial

6 Back (45˚)

1 Front3 Forward

8 Back (30˚)

1 Front3 Radial

8 Back (30˚)


6 Back (30˚)

1 Front12 Back (30˚)

2 Front3 Forward

8 Back (45˚)


8 Back (45˚)

1 Front4 Forward

12 Back (30˚)

1 Front4 Radial

8 Back (30˚)


8 Back (30˚)


3 Front3 Forward

10 Back (45˚)

HPE1 1/4" JS Lance 1.28 32.5

HPEL1 1/4" MP Tube LH 1.06 26.9

HPE2 3/8" JS Lance 1.45 36.8

HPEL2 3/8" MP Tube LH 1.28 32.5

HPE3 9/16" JS Lance 1.70 43.2

HPEL3 9/16" MP Tube LH 1.62 41.1

. Designed for use with flex or rigid lances

. HPE nozzles feature right-hand threadedfemale Jetstream Lance connections

. HPEL nozzles feature left-hand femalemedium pressure tube connections

. Two rows for rearward jets provide extraflushing power while special nose designallows for a greater number and optimalpositioning of forward jets for unplugging

. Both series have three sizes with six patterns each and fourteen flow ratings to choose


HPE TUBE CLEANING NOZZLES

Ordering HPE Nozzles Nozzle Flow Rating


HPE3 & HPEL3

HPE2 & HPEL2

HPE1 & HPEL1

2Inlet

Connection*(Female)

OutsideDiameter

Nozzle Part

Number


Overall Length

in mm

.375 9.5

.50 12.7

.75 19.1

in mm


8 Back (45˚)

1 Front6 Forward

16 Back (30˚)

1 Front6 Radial

12 Back (30˚)


12 Back (30˚)


3 Front4 Forward

8 Back (30˚)8 Back (45˚)


1 3 4 5 6

gpm lpm gpm lpm

18,000 psi(1,241 bar)

20,000 psi(1,379 bar)

gpm lpm

16,000 psi(1,103 bar)

gpm lpm

14,000 psi(965 bar)

gpm lpm

12,000 psi(827 bar)

gpm lpm

10,000 psi(690 bar)

FlowRateNo.

2 2.7 10.3 3.0 11.3 3.2 12.2 3.5 13.1 3.7 13.9 3.9 14.63 3.3 12.6 3.7 13.8 3.9 14.9 4.2 16.0 4.5 16.9 4.7 17.84 4.1 15.5 4.5 16.9 4.8 18.3 5.2 19.6 5.5 20.8 5.8 21.95 5.7 21.6 6.3 23.7 6.8 25.6 7.2 27.4 7.7 29.0 8.1 30.66 7.4 27.9 8.1 30.6 8.7 33.1 9.3 35.3 9.9 37.5 10.4 39.57 8.5 32.1 9.3 35.2 10.0 38.0 10.7 40.6 11.4 43.1 12.0 45.48 9.3 35.1 10.1 38.4 11.0 41.5 11.7 44.3 12.4 47.0 13.1 49.69 10.1 38.1 11.0 41.8 11.9 45.1 12.7 48.2 13.5 51.1 14.2 53.9

10 11.5 43.5 12.6 47.7 13.6 51.5 14.5 55.1 15.4 58.4 16.3 61.612 12.4 46.9 13.6 51.4 14.7 55.5 15.7 59.4 16.6 63.0 17.5 66.414 15.0 56.7 16.4 62.1 17.7 67.0 18.9 71.7 20.1 76.0 21.2 80.115 16.3 61.9 17.9 67.8 19.3 73.2 20.7 78.3 21.9 83.0 23.1 87.520 22.9 86.6 25.1 94.8 27.1 102.4 28.9 109.5 30.7 116.1 32.3 122.440 29.5 111.8 32.3 122.4 34.9 132.3 37.4 141.4 39.6 150.0 41.8 158.1

NOZZLES 20,000 PSI



E-16

HPM 3 4 - 7

NOZZLE SERIES



FLOW RATINGSee chart at right. Example, a flow ratingnumber of 7 will flow 10.7 gpm (40.6 lpm) at16,000 psi (1,103 bar).

1 Front6 Back

1 Front8 Back

1 Front3 Forward

6 Back

1 Front3 Forward

8 Back



1 Front6 Back

1 Front8 Back

1 Front3 Forward

6 Back

1 Front3 Forward

8 Back



HPM1 1/4" JS Lance 1.06 26.9 .475 12.1

HPM2 3/8" JS Lance 1.17 29.7 .550 14.0

HPM3 9/16" JS Lance 1.42 36.1 .730 18.5

. Designed specifically for use withJetstream flex lances

. Right-hand threaded male JetstreamLance connections

. Compact design easily navigatessharp bends

. Three sizes with six patterns each and fourteen flow ratings to choose


HPM TUBE CLEANING NOZZLES

Ordering HPM Nozzles Nozzle Flow Rating


HPM3

HPM2

HPM1

2Inlet

Connection*(Male)

OutsideDiameter

Nozzle Part

Number


Overall Length

in mm in mm

1 Front8 Back

1 Front12 Back

1 Front3 Forward

8 Back

1 Front3 Forward12 Back




1 3 4 5** 6

gpm lpm gpm lpm

18,000 psi(1,241 bar)

20,000 psi(1,379 bar)

gpm lpm

16,000 psi(1,103 bar)

gpm lpm

14,000 psi(965 bar)

gpm lpm

12,000 psi(827 bar)

gpm lpm

10,000 psi(690 bar)

FlowRateNo.

2 2.7 10.3 3.0 11.3 3.2 12.2 3.5 13.1 3.7 13.9 3.9 14.63 3.3 12.6 3.7 13.8 3.9 14.9 4.2 16.0 4.5 16.9 4.7 17.84 4.1 15.5 4.5 16.9 4.8 18.3 5.2 19.6 5.5 20.8 5.8 21.95 5.7 21.6 6.3 23.7 6.8 25.6 7.2 27.4 7.7 29.0 8.1 30.66 7.4 27.9 8.1 30.6 8.7 33.1 9.3 35.3 9.9 37.5 10.4 39.57 8.5 32.1 9.3 35.2 10.0 38.0 10.7 40.6 11.4 43.1 12.0 45.48 9.3 35.1 10.1 38.4 11.0 41.5 11.7 44.3 12.4 47.0 13.1 49.69 10.1 38.1 11.0 41.8 11.9 45.1 12.7 48.2 13.5 51.1 14.2 53.9

10 11.5 43.5 12.6 47.7 13.6 51.5 14.5 55.1 15.4 58.4 16.3 61.612 12.4 46.9 13.6 51.4 14.7 55.5 15.7 59.4 16.6 63.0 17.5 66.414 15.0 56.7 16.4 62.1 17.7 67.0 18.9 71.7 20.1 76.0 21.2 80.115 16.3 61.9 17.9 67.8 19.3 73.2 20.7 78.3 21.9 83.0 23.1 87.520 22.9 86.6 25.1 94.8 27.1 102.4 28.9 109.5 30.7 116.1 32.3 122.440 29.5 111.8 32.3 122.4 34.9 132.3 37.4 141.4 39.6 150.0 41.8 158.1

** For use with rigid lances only.


1 28404 Slurry Nozzle Holder

2 28547 Slurry Nozzle

3 54888 Body

4 29033 Setscrew

5 29033 O-Ring

6 28562 Abrasive Feed Tube

7 29030 .040" Sapphire Orifice

8 54889 Adapter, 9/16" MP Female

NOZZLES 20,000 PSI



E-17

Designed for cutting of materials by injection of an abra-sive solid into a high velocity waterjet, the Abrasive CuttingNozzle is ideal where conventional cutting methods areunsuitable.. Patented design. Nozzle can be attached directly to the end of a hand

control gun or mounted to an automated cutting system. Durable sapphire orifice creates a high velocity waterjet

which creates suction force to pull abrasive into waterjet. Stainless steel body, nozzle holder, and gun adapter. Abrasive feed tube protects nozzle body from damage. Tungsten carbide slurry nozzle features a funnel to aid

in mixing abrasive with water and a long orifice to createan extremely cohesive and powerful cutting jet

. Maximum Working Pressure: 20,000 psi (1,379 bar)

. Additional nozzle sizes available for other flow rates

ABRASIVE CUTTING NOZZLE

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmlbs kg

10,000 psi(690 bar)Inlet Connection*

(Female)WeightNozzle

PartNumber

Overall Length

in mm

Related ItemsDURASAFE™ HAND GUNS – See Guns, Valves, & Filters, Pages C-1 - 6

Replacement Parts


28484 9/16" MP Female 6.0 153 1.5 0.7 3.4 12.8 3.8 14.3 4.1 15.6 4.5 16.9 4.8 18.1

FITTINGS & GAUGES20,000 PSI



F-1

52497 20K Port Male 4 101 Bottom 1,000 0 - 35,000 20,000 1,379

52498 9/16" MP Male 4 101 Bottom 1,000 0 - 35,000 20,000 1,379

PRESSURE GAUGEFeatures• 4" high visibility face with laminated safety glass dial cover• Accurate within +/- 0.5% of full scale range• Stainless steel case and internals• Heavy-duty movement• Glycerine-filled for protection against pulsation and vibration• Blow-out pressure relief plug for maximum safety• Pointer zero adjustment• Restrictor screw

Part Number

Dial Size Maximum OperatingPressure

Inlet Connection*

in mm psi psi

Mounting Style

Graduations Range

psi bar

THREAD LUBRICANTSThread Lubricants prevent threaded connections fromgalling together or seizing up, and are a necessaryprotection for all 20,00 psi threaded components.

BLUE GOOP THREAD LUBRICANT

2 oz. TubePart Number 27721

SILVER-BASED ANTI-SEIZE

0.7 oz. StickBottom twists to extend a solid,rub-on thread lubricant for easy,mess free application.Part Number 29057

NICKEL-BASED ANTI-SEIZE

1 LB. Brush Top CanPart Number 28197


Replacement Parts26635 9/16" MP Collar26645 9/16" MP Gland Nut52044 Adapter, 9/16" MP Female x Jetstream 20K Port Male52040 20K Seal

F-2




JETSTREAM PORT MALE TO QUICKDISCONNECT FEMALE ADAPTER

Part Number

Maximum OperatingPressure

Connection 1 (C1) Connection 2 (C2) psi bar

52041 20K QD Female 20K Port Male 20,000 1,379

Replacement Parts52040 20K Seal52438 Locking Ring

Connection Types*


JETSTREAM PORT MALE NIPPLE

Part Number



52209 20K Port Male 20K Port Male 20,000 1,379

Replacement Parts52040 20K Seal51929 Jam Nut

Connection Types*


JETSTREAM PORT MALE TO QUICKDISCONNECT MALE ADAPTER

Part Number



51917 20K QD Male 20K Port Male 20,000 1,379

Replacement Part52040 20K Seal

Connection Types*


F-3




JETSTREAM PORT MALE TO MEDIUMPRESSURE FEMALE ADAPTERS

Part Number



54737 3/4" MP Female 20K Port Male 20,000 1,379

52044 9/16" MP Female 20K Port Male 20,000 1,379


Connection Types*


JETSTREAM PORT MALE TO MEDIUMPRESSURE MALE ADAPTERS

Part Number



54738 3/4" MP Male 20K Port Male 20,000 1,379

52354 9/16" MP Male 20K Port Male 20,000 1,379


Connection Types*


JETSTREAM PORT MALE TOTYPE "M" MALE ADAPTERS

Part Number



54749 1 5/16" Type "M" Male 20K Port Male 20,000 1,379

53284 1" Type "M" Male 20K Port Male 20,000 1,379

54741 3/4" Type "M" Male 20K Port Male 20,000 1,379

54739 9/16" Type "M" Male 20K Port Male 20,000 1,379


Connection Types*


F-4




JETSTREAM PORT PLUG

Part Number


psi bar

52076 20K Port Male 20,000 1,379


Connection Type*


JETSTREAM PORT FEMALE TO QUICKDISCONNECT MALE ADAPTER

Part Number



53038 20K QD Female 20K Port Female 20,000 1,379

Connection Types*


JETSTREAM PORT FEMALE TO MEDIUMPRESSURE FEMALE ADAPTERS

Part Number



54746 3/4" MP Female 20K Port Female 20,000 1,379

53037 9/16" MP Female 20K Port Female 20,000 1,379

Connection Types*


F-5Jetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com



JETSTREAM PORT FEMALE TO TYPE "M" MALE ADAPTERS

Part Number



54743 1" Type "M" Male 20K Port Female 20,000 1,379

54744 3/4" Type "M" Male 20K Port Female 20,000 1,379

54748 9/16" Type "M" Male 20K Port Female 20,000 1,379

Connection Types*


JETSTREAM MULTI-PORT ADAPTER

This fitting has a male 20K Port Connection that fits into a dischargeport of the 20,000 psi UNx Fluid End and two female port outlet connections to split flow or add an accessory device. Ideal for shut-in(regulator-operated) systems.

Part Number



52073 20K Port Male 20K Port Female 20,000 1,379

Connection Types*


JETSTREAM PORT TEE

Part Number


psi bar

54747 20K Port Female 20,000 1,379

Connection Type*





QUICK DISCONNECT FEMALE TO MEDIUM PRESSUREFEMALE ADAPTERS

Part Number



52193 3/4" MP Female 20K QD Female 20,000 1,379

52039 9/16" MP Female 20K QD Female 20,000 1,379


Connection Types*


QUICK DISCONNECT FEMALE TO MEDIUM PRESSURE MALE ADAPTERS

Part Number



52187 3/4" MP Male 20K QD Female 20,000 1,379

52038 9/16" MP Male 20K QD Female 20,000 1,379


Connection Types*


QUICK DISCONNECT FEMALE TO TYPE "M" MALE ADAPTERS

Part Number



52189 1" Type M 20K QD Female 20,000 1,379

52188 3/4" Type M 20K QD Female 20,000 1,379

52668 9/16" Type M 20K QD Female 20,000 1,379


Connection Types*





QUICK DISCONNECT MALE TO MEDIUM PRESSURE FEMALE ADAPTERS

Part Number



54752 1" MP Female 20K QD Male 20,000 1,379

52191 3/4" MP Female 20K QD Male 20,000 1,379

52032 9/16" MP Female 20K QD Male 20,000 1,379

Connection Types*


QUICK DISCONNECT MALE TO MEDIUM PRESSURE MALE ADAPTERS

Part Number



54753 1" MP Male 20K QD Male 20,000 1,379

52179 3/4" MP Male 20K QD Male 20,000 1,379

52031 9/16" MP Male 20K QD Male 20,000 1,379

Connection Types*


QUICK DISCONNECT MALE TO TYPE "M" MALE ADAPTERS

Part Number



52182 1" Type "M" Male 20K QD Male 20,000 1,379

52181 3/4" Type "M" Male 20K QD Male 20,000 1,379

52667 9/16" Type "M" Male 20K QD Male 20,000 1,379

Connection Types*





TYPE "M" MALE CONNECTORS

Part Number



29058 1 5/16" Type "M" Male 1 5/16" Type "M" Male 20,000 1,379

29059 1 5/16" Type "M" Male 1" Type "M" Male 20,000 1,379

29060 1 5/16" Type "M" Male 3/4" Type "M" Male 20,000 1,379

29061 1" Type "M" Male 1" Type "M" Male 20,000 1,379

28487 1" Type "M" Male 3/4" Type "M" Male 20,000 1,379

29019 1" Type "M" Male 9/16" Type "M" Male 20,000 1,379

28196 3/4" Type "M" Male 3/4" Type "M" Male 20,000 1,379



Connection Types*


TYPE "M" MALE TO MEDIUM PRESSURE MALE CONNECTORS

Part Number



28330 1 5/16" Type "M" Male 1" MP Male 20,000 1,379

28786 1 5/16" Type "M" Male 3/4" MP Male 20,000 1,379

28299 1 5/16" Type "M" Male 9/16" MP Male 20,000 1,379

28433 1" Type "M" Male 1" MP Male 20,000 1,379

28629 1" Type "M" Male 3/4" MP Male 20,000 1,379

28631 1" Type "M" Male 9/16" MP Male 20,000 1,379

29063 3/4" Type "M" Male 1" MP Male 20,000 1,379

29064 3/4" Type "M" Male 3/4" MP Male 20,000 1,379



29066 9/16" Type "M" Male 1" MP Male 20,000 1,379





Connection Types*





Part Number


psi bar

28301 1" MP Female 20,000 1,379

29067 3/4" MP Female 20,000 1,379

27969 9/16" MP Female 20,000 1,379

29068 3/8" MP Female 20,000 1,379

29069 1/4" MP Female 20,000 1,379

Connection Type*


MEDIUM PRESSURE CROSSESAll medium pressure crosses include gland nuts and collars.

Part Number


psi bar

29070 1" MP Female 20,000 1,379

29071 3/4" MP Female 20,000 1,379

27966 9/16" MP Female 20,000 1,379

27964 3/8" MP Female 20,000 1,379

29072 1/4" MP Female 20,000 1,379

Connection Type*


MEDIUM PRESSURE TEESAll medium pressure tees include gland nuts and collars.

Part Number


psi bar

29073 1" MP Female 20,000 1,379

29074 3/4" MP Female 20,000 1,379

28184 9/16" MP Female 20,000 1,379

27997 3/8" MP Female 20,000 1,379

29075 1/4" MP Female 20,000 1,379

Connection Type*


MEDIUM PRESSURE ELBOWSAll medium pressure elbows include gland nuts and collars.




MEDIUM PRESSURE STRAIGHT COUPLINGSAll medium pressure couplings include gland nuts and collars.

Part Number



28341 1" MP Female 1" MP Female 20,000 1,379

29076 1" MP Female 3/4" MP Female 20,000 1,379

29077 1" MP Female 9/16" MP Female 20,000 1,379

28382 3/4" MP Female 3/4" MP Female 20,000 1,379









Connection Types*


Part Number


psi bar

29081 1" MP Female 20,000 1,379

29082 3/4" MP Female 20,000 1,379

29083 9/16" MP Female 20,000 1,379

29084 3/8" MP Female 20,000 1,379

29119 1/4" MP Female 20,000 1,379

Connection Type*


MEDIUM PRESSURE UNION COUPLINGS Union couplings feature a removable seat insert that allows the fitting to slipover one end of the tubing for ease of installation in confined spaces or rigidpiping applications. All medium pressure union couplings include gland nutsand collars.




MEDIUM PRESSURE MALE CONNECTORS

PartNumber



29085 1" MP Male 1" MP Male 20,000 1,379

29086 1" MP Male 3/4" MP Male 20,000 1,379

29087 1" MP Male 9/16" MP Male 20,000 1,379

29088 3/4" MP Male 3/4" MP Male 20,000 1,379

29089 3/4" MP Male 9/16" MP Male 20,000 1,379

29090 3/4" MP Male 3/8" MP Male 20,000 1,379

29091 9/16" MP Male 9/16" MP Male 20,000 1,379

29092 9/16" MP Male 3/8" MP Male 20,000 1,379

29093 9/16" MP Male 1/4" MP Male 20,000 1,379

28191 3/8" MP Male 3/8" MP Male 20,000 1,379

28190 3/8" MP Male 1/4" MP Male 20,000 1,379

29094 1/4" MP Male 1/4" MP Male 20,000 1,379

Connection Types*


SCREW TYPE QUICK CONNECTCOUPLINGS

• Provide easy connection or removal of hoses and other compo-nents.

• Hand-tight connection between coupling halves.• Couplings feature easily replaceable seals that eliminate wear of

metal-to-metal seats that commonly occurs after repeated connections.

• Coupling halves are interchangeable between connection types.

AssemblyPart

Number


Female Male psi bar

54754 1” Type “M” Male 54762 54763 20,000 1,379

54767 3/4" Type “M” Male 54758 54764 20,000 1,379

54768 9/16" MP Female 54761 54766 20,000 1,379

Replacement Parts54789 Seal Kit25690 Retaining Ring

Connection Type* Coupling Halves





MEDIUM PRESSURE MALE TO MEDIUM PRESSURE FEMALE CONNECTORSFittings include gland nut and collar for female connection.

Part Number



29095 1" MP Male 3/4" MP Female 20,000 1,379

28797 1" MP Male 9/16" MP Female 20,000 1,379

28462 3/4" MP Male 9/16" MP Female 20,000 1,379

29096 3/4" MP Male 3/8" MP Female 20,000 1,379

28186 9/16" MP Male 3/8" MP Female 20,000 1,379

28726 9/16" MP Male 1/4" MP Female 20,000 1,379

29097 3/8" MP Male 1/4" MP Female 20,000 1,379

Connection Types*



MEDIUM PRESSURE ANTI-VIBRATION GLAND ASSEMBLIES

Used to reduce stress on tubing threads in conditions where bending or vibration are present, anti-vibrationgland assemblies feature a collet that clamps onto the tubing when the connection is tightened to provide extrasupport and strength.

AssemblyPart

Number

29103 1" MP Male 29103G 29103C 28732 29103R

29104 3/4" MP Male 29104G 29104C 28384 29104R

28268 9/16" MP Male 28268G 28268C 26635 28268R

29105 3/8" MP Male 29105G 29105C 28180 29105R

29106 1/4" MP Male 29106G 29106C 29099 29106R

Connection Type* Replacement Part Number

Gland Nut Collet Collar Collet Nut

MEDIUM PRESSURE GLAND NUTS, COLLARS, AND PLUGS

1" MP Male 28731 28732 29100

3/4" MP Male 28383 28384 29101

9/16" MP Male 26645 26635 27973

3/8" MP Male 28181 28180 28229

1/4" MP Male 29098 29099 29102

Part Numbers

Gland Nut Collar Plug


Connection Type*

Gland Nut Collar Plug

29013-XX 1" MP Tube LH Male 1" MP Tube LH Male .990 25.1 .688 17.5 20,000 1,379

29108-XX 3/4" MP Tube LH Male 3/4" MP Tube LH Male .740 18.8 .438 11.1 20,000 1,379

29109-XX 3/4" MP Tube LH Male 3/4" MP Tube RH Male .740 18.8 .438 11.1 20,000 1,379

29110-XX 3/4" MP Tube RH Male 3/4" MP Tube RH Male .740 18.8 .438 11.1 20,000 1,379



53279-XX 9/16" MP Tube LH Male 9/16" JS Lance Male .553 14.0 .312 7.9 20,000 1,379


54782-XX 9/16" MP Tube RH Male 9/16" JS Lance Male .553 14.0 .312 7.9 20,000 1,379

53063-XX 9/16" JS Lance Male 9/16" JS Lance Male .553 14.0 .312 7.9 20,000 1,379
















Related ItemsRIGID LANCES – See Page D-8 for lengths greater than 2 feet (24 inches).


NIPPLES• High tensile strength, cold drawn stainless steel

• Glands and collars not included

• Three connection types available:

Left Hand Medium Pressure Tubing (MP Tube LH):Used in standard medium pressure connections (using glands and collars) or with lance fittings (no glands and collars) or tube nozzles that have medium pressure left-handed female threads. Available in 1/4" to 1" sizes.

Right Hand Medium Pressure Tubing (MP Tube RH):Used with lance fittings (no glands and collars) or tube nozzles that havemedium pressure right-handed female threads. Available in 1/4" to 3/4" sizes.

Jetstream Lance Connections (JS Lance):Right-handed connections for use with Jetstream's popular tube nozzles and lance fittings. Available in 1/4", 3/8", & 9/16" sizes.

in mm in mm psi bar

Part Number

specify length(in inches) inplace of "XX"

O.D. I.D. Max. WorkingPressure

Connection Types*

Connection 1 (C1) Connection 2 (C2)

To Order: Use five digit part number corresponding tothe desired connection types, followed by a dash (-), andending with two digits representing the length, in inches.

Example: a 6" nipple with a 9/16" MP Tube LH connec-tion on one end and a 9/16" JS Lance connection on theother would be ordered as part number 53279-06.

MP Tube LHConnection

MP Tube RHConnection

JS LanceConnection




53221 9/16" JS Lance Male 9/16" JS Lance Male .750 19.1 20,000 1,379







in mm psi bar

Part Number

Maximum O.D. Max. Working(D) Pressure

Connection Types*


28668 9/16" MP Tube LH Female 9/16" MP Tube LH Female .750 19.1 20,000 1,379

29111 9/16" MP Tube LH Female 9/16" MP Tube RH Female .750 19.1 20,000 1,379

52767 9/16" MP Tube LH Female 9/16" JS Lance Female .750 19.1 20,000 1,379

29112 9/16" MP Tube RH Female 9/16" MP Tube RH Female .750 19.1 20,000 1,379

52766 9/16" JS Lance Female 9/16" JS Lance Female .750 19.1 20,000 1,379















in mm psi bar

Part Number

O.D. Max. Working(D) Pressure

Connection Types*


JETSTREAM LANCE CLOSE NIPPLES• Used to connect tube cleaning nozzles, fittings, and lances that have

Jetstream Lance connections

• Wrench flats for easy connection and removal

SLIMLINE LANCE COUPLINGS• Used to couple rigid and flex lances without the use of glands and

collars to allow them to fit into tubes.

• Additional couplings available upon request




F-15

52552 9/16" JS Lance Male 9/16" MP Tube LH Female .750 19.1 20,000 1,379

54174 3/8" JS Lance Male 3/8" MP Tube LH Female .500 12.7 20,000 1,379

54176 1/4" JS Lance Male 1/4" MP Tube LH Female .375 9.5 20,000 1,379* See details on all connection types beginning on page I-2.

in mm psi bar

Part Number

Maximum O.D. Max. Working(D) Pressure

Connection Types*


SLIMLINE MALE TO FEMALE TUBEADAPTERSUsed to connect components with female Jetstream Lance connectionsto those with male left-handed medium pressure tubing connectionswithout the use of glands and collars.

29116 9/16" MP Female 9/16" MP Tube LH Female 20,000 1,379



psi bar

Part Number

Max. WorkingPressure

Connection Types*


MEDIUM PRESSURE RIGIDLANCE HOLDERSThe Jetstream medium pressure rigid lance holder is used to providereduced stress on the rigid lance to flexible lance connection, greatlyreducing lance breakage and increasing safety. The rigid lance isinserted into the support tube and screwed into the female threadedconnection.

Related ItemsRIGID LANCES – See Hoses & Lances, Page D-8


psi bar




F-16

JETSTREAM RIGID LANCE HOLDERS• Connect rigid lances that feature Jetsream Lance connections to hoses

that have Jetstream Quick Disconnect end fittings.

• Support collet prevents lance breakage by reducing stress on lance threads.

Part Number

52648 20K QD Male 9/16" Jetstream Lance Female 52087 52083 20,000 1,379



Connection Types* Replacement Part Number

Collet Collet Nut




JETSTREAM QUICK DISCONNECTMALE FLEX LANCE CONNECTORSConnect flex lances that feature female Jetsream Lance connectionsto hoses that have Jetstream Quick Disconnect end fittings.

DIDN’T FIND WHAT YOU NEED? ...GIVE US A CALL!

In addition to the products in this section, Jetstream also offers:• Pressure gauges with other mounting and connection styles• Medium pressure needle valves and check valves• Adapters for less popular connection types• Lance manifolds for multiple lance operations• Specialty and custom fittings designed for specific needs

psi bar

Part Number

53967 20K QD Male 9/16" Jetstream Lance Male 20,000 1,379

51916 20K QD Male 3/8" Jetstream Lance Male 20,000 1,379

Connection Types*




G-1Copyright Jetstream of Houston, LLP ©2004Jetstream of Houston, LLP

Phone (US & Canada): 800-231-8192 or 713-462-7000Web Site: www.waterblast.com

SAFETY20,000 PSI

SAFETY APPAREL

TurtleSkin Water Armor is designed for UHP safety.• Protection up to 2800 bar or 40,000 psi• One size fits all money-saving design• Modular design allows you to buy only what you need• Replacement parts keep your suit safe longer• Open back keeps you cooler longer• Built-in knee pad for added productivity• Lightweight suit protects without tiring the operator• Hinged panel design gives greater flexibility

Pressure psi

(bar)

40,000(2,800)

36,000(2,500)

20,000(1,400)

10,000(700)

Flow Rate gpm

(lpm)

5.5(21)

5(19)

11(42)

16(61)

Office ID in

(mm)

0.035(0.889)

0.035(0.889)

0.051(1.295)

0.073(1.854)

O˚ NozzleSingleOrifice:Material

Sapphire

Sapphire

TungstenCarbide

TungstenCarbide

Efficiency FactorGPM/# of orifices

Orifice ID in2

Pressure psi

[ ]

22.4

21.5

29.9

30

COMPLETE TURTLESKIN GEAR*


A 28592 Upper Torso

B 28593 Chaps

C 28589 Gauntlets (Gloves not included)

D 27884 Gaiters (Boots not included)

A/B 27885 Upper Torso, Chaps*Suit replacement parts available. Contact factory.

A

B

C

D

Test ResultsNO Penetration occurred beyond protective system withwaterjet traveling at 8 ft/sec. (2.4 m/sec.), no closer than 3 in. (7.62 cm) at these conditions:

G-2

SAFETY20,000 PSI

SAFETY SUPPLIES & ACCESSORIES

3 4

10

9

13 14

1 25625 Adjustable Hard Hat (Rain Through Outer Rim) 2 25620 Soft Frame, Fogless Goggles 3 25621 Face Shield with Mounting Bracket 4 26255 Face Shield Window Replacement 5 25617 - Size Waterblast Approved Rain Suit (Specify Size: S, M, L, XL, or XXL) 6 26894 Shin/Foot Aluminum Guard 7 27168 Steel Toe, 16" Knee High Boots (Specify Shoe Size) 8 25624 Vinyl, 14 Gauntlet Gloves (Blue)

27019 Waterblast Safety Video in VHS 9 28632 Waterblast Safety Video in DVD

28633 Waterblast Safety Video in CD10 26247 “Health Hazard” Caution Sign 8 1/2" x 11" 11 26253 “Restricted” Caution Sign 8 1/2" x 11" 12 25614 “Waterblasting” Danger Sign 8 1/2" x 11" 13 26444 “Caution: Waterblasting In Progress” Safety Tape 300 ft. Roll 14 28501 Safety Warning Sticker: “Always Wear Your Safety Gear”

Copyright Jetstream of Houston, LLP ©2004Jetstream of Houston, LLPPhone (US & Canada): 800-231-8192 or 713-462-7000Web Site: www.waterblast.com

5

1 2

76 8

11 12


G-3

SAFETY20,000 PSI

RUPTURE DISC HOLDERSProduct DescriptionFor protection from dangerous over-pressurization, rupture discs function in a waterblast system analogous to the function of fuses in an electrical circuit. When the systempressure exceeds that of the burst disc, the disc blows andallows water to flow out of the holder’s cap, relieving the systemof high pressure.. May be used as primary and/or secondary relief device. Tamper-resistant design. Discs are quickly and easily replaceable. Assembly components machined from high quality stainless

steel

NOTE: Burst Disc not included with assembly.

Disc SelectionFor primary relief devices, select disc withburst pressure of approximately 1.2 timesdesired operating pressure.

ExampleFor operating pressure of 20,000 psi, desiredburst pressure is 20,000 x 1.2 = 24,000 psi.Select 24,000 psi Burst Disc, part number51838.

For secondary relief devices, select disc withburst pressure of approximately 1.4 timesdesired operating pressure.

Example For operating pressure of 20,000 psi, desiredburst pressure is 20,000 x 1.4 = 28,000 psi.Select 27,000 psi Burst Disc, part number51837 or 29,000 psi Burst Disc. part number51836.



Part Number 52035 Part Number 51890

Part Number

Disc Blow OutDiameter

(D)

Flats(H)

51890 9/16" Medium Pressure Male 3.16 80.3 .40 10.2 1.25 31.8 20,000 1,379

52035 Jetstream 20K Port Male 3.03 77.0 .40 10.2 1.25 31.8 20,000 1,379

Maximum WorkingPressure

Connection Type*(C)

Overall Length(L)

Burst Disc Pressurepsi bar

51838 24,000 1,655

51837 27,000 1,861

51836 29,000 2,000

1 52040 Seal Assembly

252043 Base, Jestream 20K Male Port

51774 Base, 9/16" Medium Pressure Male3 See Disc Chart Rupture Disc

4 51773 Hold-Down Ring

5 51772 Cap

PartNumber


in mm in mm in mm psi bar

Replacement Burst DiscSee Disc Selection instructions above.

Replacement Parts


SAFETY20,000 PSI

SEVERE SERVICE RELIEF VALVEFor use as a primary relief device to protect waterblast systems and operators from dan-gerous overpressurization, the Severe Service Relief Valve opens to safely bypass some ofthe system flow in circumstances where the operating pressure exceeds the factory setopening pressure of the valve.

. Designed for rigorous service and low maintenance.

. Valve constructed with carbide ball and hardened stainless steel seat for long service life.

. Precise machining and cartridge design of ball-seat valve assembly and spring assemblyallows quick and simple field repair without disturbing the valve pressure setting.

. Shipped from the factory preset and tested at customer specified opening pressure.

. Factory set opening pressure is stamped into anti-tamper ring which is installed to pre-vent set pressure from being changed without evidence.



G-4

Part Number

Flats(H)

50131 9/16" Medium Pressure Male 6.75 171.5 1.75 44.5 24,000 1,655 20,000 1,379

52030 Jetstream 20K Port Male 6.62 168.1 1.75 44.5 24,000 1,655 20,000 1,379

Maximum WorkingPressure

MaximumOpeningPressure

(Factory Set)

Connection Type*(C)

Overall Length(L)

in mm in mm psi bar psi bar


Part Number 52030 Part Number 50131

1 52040 Seal Assembly

2 50148 Base, 9/16" Medium Pressure Male

52042 Base, Jetstream 20K Male Port

3 50133 Ball-Seat Cartridge Assembly

4 50134 Spring Cartridge Assembly


Replacement Parts

SAFETY20,000 PSI



G-5

DURASAFE™ SAFETY SHROUDDesigned for use with the 20,000 psi DuraSafe™ controlguns, safety shroud assemblies provide necessary operatorprotection in the event of a hose or end fitting failure. . Stainless steel wire braiding crimped onto both end fittings

to contain potential hose burst and prevent separation ofan end fitting from the assembly.

. Cordura® abrasion cover.

. Single-piece design combines safety whip and safetyshroud into one assembly for ease of use.

. May be changed frequently for new hose protection atminimal cost (6' hose cost vs. 50' hose cost). to ensurethat the hose nearest the operator’s body is always ingood condition.

52534-00663695 6 1.8 Jetstream 20K QD Male Jetstream 20K Port Female .50 12.8 20,000 1,379

Part Number

Length

ft m

Inlet Connection*(to Supply Hose)

Outlet Connection*(to Gun)

Hose I.D. Max. OperatingPressure

psi barin mm


54755 6 1.8 1” Type “M” Female .50 12.8 28860 28861 52534-0064242 Rubber 20,000 1,379

54740 6 1.8 1” Type “M” Female .50 12.8 28860 28861 28347-0064242 Plastic 20,000 1,379

54745 6 1.8 3/4" Type "M" Female .32 8.0 28860 28861 53816-0064040 Plastic 20,000 1,37954750 6 1.8 9/16” Type “M” Female .25 6.3 28860 28861 51954-0063939 Plastic 20,000 1,379

SAFETY SHROUDSDesigned for use with 20,000 psi control guns that have mediumpressure inlet connections (non-DuraSafe™), these safety shroudassemblies assure operator protection in the event of a hose orend fitting failure by completely enclosing the hose and connectionfittings. Assemblies include shroud, nut, and a six foot whip hose,or items can be purchased individually.. Shroud is constructed of flexible, durable, and abrasion resist-

ant thermoplastic around two layers of stainless steel braidingfor maximum protection.

. Shroud is easily fastened or removed from rear barrel of controlgun by a stainless steel nut which fits over connection fittings.

. Whip hoses are six foot lengths of waterblast hose designed tobe a cost effective solution for ensuring operator safety. They are meant to be replaced at regular intervals to ensurethat the hose nearest the operator’s body is always in good condition.

. Contact factory for connection types other than those listed below

Part Number

Length

ft m

Hose Connection* Hose I.D.

in mm

Replacement Parts

Shroud Nut Whip Hose** Whip Material


psi bar

* See details on all connection types beginning on page I-2.** Whip Hoses listed do not have abrasion or burst shield guards and are not intended for use near an operator without a safety shroud.

Related ItemsDURASAFE™ HAND CONTROL GUNS - See Guns, Valves, & Filters, Pages C-1 - 6

SAFETY20,000 PSI



G-6

STRAIN RELIEF HOSEUsed for flex lance applications, the strain relief hose preventskinking of the flex lance to extend service life.

. Rubber hose material is more flexible and manageable thanthermoplastic flex lance material

. Connects the foot control gun and the flex lance

52534-0036366 3 0.9 Jetstream 20K QD Male 3/8" Jetstream Lance Female .50 12.8 20,000 1,379

52534-0036367 3 0.9 Jetstream 20K QD Male 9/16" Jetstream Lance Female .50 12.8 20,000 1,379

Part Number

Length

ft m

Inlet Connection*(to Foot Gun)

Outlet Connection*(to Flex Lance)

Hose I.D. Max. OperatingPressure

psi barin mm


FLEX LANCE SAFETY GRIPFor use in flex lance tube cleaning operations, the safetygrip prevents a nozzle from unexpectedly exiting a tube byproviding a stop through which the sleeve of the flex lancewill not pass. Includes lance stop retainer for use ontubes up to 3/4" OD. Choose lance stop(s) (not included)or additional lance stop retainers below.

Part Number 51024

Lance StopsChoose lance stops below based on flex lance inside diameter.

HOSE CHECKSInstalled on hose ends to prevent injury by restraining the hose inthe event of an end fitting failure.

Steel hose check is manufactured from galvanized high tensilewire rope with spring-loaded retainers for easy installation andremoval. Part Number 52242.

Nylon hose check is made from durable strap with extra-heavystitching. Spring-retained for easy removal. Part Number 27863.

Lance Stop RetainersChoose lance stop retainersbased on the outside diameterof the tube to be cleaned.

51055 for tubes up to 3/4" OD (included with safety grip)

51425 for tubes up to 1" OD

51427 for tubes up to 2"OD.

Part Number Use

Related Items

JETSTREAM LANCE CLOSE NIPPLES - See Fittings, Page F-14

Flex Lance Safety Grip Part Number 51024

Lance Stop Retainers

Lance Stops

51044 51952 .16 4.0

51038 51953 .20 5.0

51038 51954 .25 6.3

51779 53816 .32 8.0

Lance Stop Flex Lance Flex LancePart Series Inside Diameter

Number Number in mm

Part Number 52242

Part Number 27863

SURFACE CLEANERS20,000 PSI

HYDRO-MOWERSURFACE CLEANER

. Swivel speed can beadjusted from 50 to 800RPM using a standardallen wrench. No fluidchanges. No "hit or miss"spray arm angle adjust-ments.

. Swivel Seal Cartridge iseasily removable, unlikeplastic-only swivel sealsthat often must be priedfrom swivel bores.Maintenance cost isreduced by integrating aportion of the swivel shaftinto the seal cartridge,preventing wear to themain shaft.

. Deck Height Adjustmentwheel and cam lock allowdistance between nozzlesand surface to be easilyand quickly optimized.

. Rotary Union increasesmaneuverability andreduces operator fatigueby acting as a pivot for asupply hose, eliminatingthe tiresome task of man-ually shifting hose positionwith each pass.

Used to clean large horizontal surfaces with four power-ful self-rotating jets, Jetstream Hydro-Mowers aredesigned for efficiency, ease of use, fast maintenance,safety, and versatility. They are ideal for any job, fromgrate and floor cleaning to stripping paint and rubber.


Copyright Jetstream of Houston, LLP ©2004H-1

. Mechanically controlled dump valve provides safe,reliable control of pressure without air or electricity

. Cartridge Style Design allows dump valve to be rebuilt in under a minute with no special tools

. Pressure Gage mounted to dump valve on mowerhandle for operator convenience and safety

. Adjustable Handle Height

i n c m

S U R FACE CLEANERS20,000 PSI

H Y D R O - M O W E RS U R FACE CLEANER

. Hydro-Mowers utilize a four jet Spray Bar that featurestwo jets directed 15° inward and two jets directed 15°outward to create two rotating paths for maximum cov-erage while the jet angle is ideal for cleaning grates inpaint booths.

. Straightening vane in each extension for increased jet quality

. Extensions with other jet angles available upon request.

. Spray bar nozzle extensions are held to an aluminum support plate formaximum stability.

. Used with straight or fan pattern H P N o z z l e s

. Galvanized deck

. Available with 24" or 30" cleaning paths



H-2

PartN u m b e r

H e a dD i a m e t e r

53150 30" 20K QD Female 9/16" MP Male 50 - 800 375 170 25 95 20,000 1,379

53155 24" 20K QD Female 9/16" MP Male 50 - 800 350 160 25 95 20,000 1,379

I n l e tC o n n e c t i o n *

Outlet (Nozzle)C o n n e c t i o n *

Maximum Flow

g p m l p m

Max. OperatingP r e s s u r e

p s i b a rl b s k g

We i g h tS p e e dR a n g e

M o w e rP a r t

N u m b e r

Overall Length Range (A)

Cleaning Path( D )

i n c m i n c mi n c mi n c m

Overall Height Range (B)

OverallWidth (C)

Deck Height Range (E)

53150 59-77 150-197 35-47 88-120 301/4 77 2 61/4- 2 71/4 67-69 0-21/2 0-6

53155 56-74 142-189 35-47 88-120 241/4 62 2 0 - 2 21 / 2 51-57 0-31/2 0-9


S U R FACE CLEANERS20,000 PSI



H-3

H Y D R O - M O W E RS U R FACE CLEANERREPLACEMENT PA R T S

38 53396 Seal Cap39 25229 O-Ring40 53405 Swivel Seal Cartridge41 27042 V-Ring Seal42 52819 Seal Screw43 53395 Swivel Cap44 27045 O-Ring45 27044 Oil Seal46 27048 Guide Bearing47 27046 O-Ring48 52756 Speed Control Cap49 52762 Inner Rotor50 27040 Outer Rotor51 27204 O-Ring52 52958 Hollow Pin53 52764 Speed Control Housing54 27038 Pin55 53343 Shaft56 27049 Thrust Bearing57 27043 Oil Seal58 52753 Swivel Body59 52040 20K Seal60 27052 O-Ring61 52757 Speed Adjustment Screw

1 25037 Gage

2 26645 Gland Nut

3 26635 Collar

Adapter, 9/16" MP x 20K Port Male

5 52040 20K Seal

6 27192 Capscrew

7 53369 Valve Body

8 52073* Multi-Port Adapter

Adapter, 20K Port Male x 20K QD Male

10 51864 Diffuser

11 51869 C-20 Cartridge

12 52076* 20K Port Plug

13 52534-M HoseAdapter, 20K Port Male x 20K QD Female

15 27160 Capscrew

53093 Splash Guard, 30" Mower53094 Splash Guard, 24" Mower

17 27073 Capscrew53097 Retaining Ring, 30" Mower53096 Retaining Ring, 24" Mower

19 26711 Nut

20 51874 Nozzle Sleeve54891 15° Inward Arm, 30" Mower54892 15° Inward Arm, 24" Mower

22 54893 15° Outward Arm, 30" Mower54894 15° Outward Arm, 24" Mower54896 Vertical Arm, 30" Mower54897 Vertical Arm, 24" Mower

24 29129 Capscrew25 54898 Extension Clamp26 26645 Gland Nut27 26635 Collar28 29130 Capscrew29 54899 Cross30 29131 Support Plate

SURFACE CLEANERS20,000 PSI

HYDRO-MOWERSURFACE CLEANER REPLACEMENT PARTS

HP NOZZLESHydro-Mowers utilize four carbide or sapphire HP Nozzles


Copyright Jetstream of Houston, LLP ©2004H-4

ItemItemItem

PartNumber

Description

4 52044*

9 51917*

14 52041*

21

23

16

18

Description PartNumber

PartNumber

31 52040 20K Seal32 53821 Shaft33 53429 Backup Ring34 26317 O-Ring35 27491 Retaining Ring36 53823 Body37 27492 Grease Zerk

Item Description

Description

PartNumber

Spray Bar Assembly

Rotary Union Assembly

Swivel Assembly

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

HP0Nozzle

PartNumber

HP15Nozzle

PartNumber

Four HP Nozzles inHydro-Mower

. Carbide orifice

. For single nozzle flowdata, see page E-6

. HP0 - Straight pattern

. HP15 - 15° fan pattern

Orifice Size

* 20K Seal (Part Number 52040) is included with this fitting. For item 14, two seals are included.

** Not Available

gpm lpm

20,000 psi(1,379 bar)

gpm lpm

17,500 psi(1,207 bar)

gpm lpm

15,000 psi(1,034 bar)

gpm lpm

12,500 psi(862 bar)

gpm lpmNo. in mm

10,000 psi(690 bar)

HP15Nozzle

PartNumber

Four HPS0 Nozzles

in Hydro-Mower

. Sapphire orifice

. For single nozzle flow data, seepage E-6

. Straight pattern

Orifice Size

54881 000 .018 0.46 2.6 9.8 2.9 11.0 3.2 12.0 3.4 13.0 3.7 13.954882 00 .025 0.64 5.0 18.9 5.6 21.2 6.1 23.2 6.6 25.0 7.1 26.854883 0 .029 0.74 6.7 25.5 7.5 28.5 8.2 31.2 8.9 33.7 9.5 36.052747 1 .033 0.84 8.7 33.0 9.8 36.9 10.7 40.4 11.5 43.6 12.3 46.652748 2 .038 0.97 11.6 43.7 12.9 48.9 14.2 53.6 15.3 57.8 16.3 61.852749 3 .042 1.07 14.1 53.4 15.8 59.7 17.3 65.4 18.7 70.6 20.0 75.552751 4 .046 1.17 16.9 64.1 18.9 71.6 20.7 78.5 22.4 84.8 23.9 90.6

54868 ** 000 .018 1.8 3.1 11.8 3.5 13.2 3.8 14.4 4.1 15.6 4.4 16.654869 ** 00 .025 2.6 6.0 22.7 6.7 25.4 7.4 27.8 7.9 30.0 8.5 32.151978 54874 0 .029 3.0 8.1 30.6 9.0 34.2 9.9 37.4 10.7 40.4 11.4 43.251979 ** 1 .033 3.4 10.4 39.6 11.7 44.2 12.8 48.5 13.8 52.4 14.8 56.051980 53204 2 .038 3.9 13.9 52.5 15.5 58.7 17.0 64.3 18.3 69.4 19.6 74.251981 53205 3 .042 4.3 16.9 64.1 18.9 71.7 20.8 78.5 22.4 84.8 24.0 90.6

I-1

TECHNICAL20,000 PSI

UNIT CONVERSIONS & FORMULAS



Measurement Conversion Example

1 in. = 25.4 mm 12 in. x 25.4 = 304.8 mm

1 in. = .0254 m 120 in. x .0254 = 3.05 m

1 ft. = .3048 m 12 ft. x .3048 = 3.68 m

1 mm = .0394 in. 100 mm x .0394 = 3.94 in.

1 m = 39.37 in. 10 m x 39.37 = 393.7 in.

1 m = 3.281 ft. 10 m x 3.281 = 32.81 ft.

1 gal = 3.785 l 10 gal x 3.785 = 37.85 l

1 liter = .2642 gal 100 liters x 26.42 = 26.42 gal

1 lb. = .454 kg 10 lbs. x .454 = 4.54 kg

1 kg = 2.205 lbs. 10 kg x 2.205 = 22.05 lbs.

1 psi = .06895 bar 40,000 psi x .06895 = 2,758 bar

1 bar = 14.503 psi 2,758 bar x 14.503 = 40,000 psi

1 gpm = 3.785 lpm 30 gpm x 3.785 = 113.55 lpm

1 lpm = .2642 gpm 100 lpm x .264 = 26.42 gpm

1 lb. = 4.448 N 100 lbs. x 4.448 = 444.8 N

1 N = .2248 lbs. 900 N x .2248 = 202.32 lbs.

1 lb.-ft. = 1.3567 N-m 100 lb.-ft. x 1.3567 = 135.67 N-m

1 N-m = .737 lb.-ft. 100 N-m x .737 = 73.7 lb.-ft.

1 hp = .7457 kW 50 hp x .7457 = 37.29 kW

1 kW = 1.341 hp 50 kW x 1.341 = 67.05 hp

Length

Volume

Weight

Pressure

Flow

Force

Torque

Power

Formula English Units Metric Units

hp = gpm x psi / 1550 kW = lpm x bar / 540Power Requirements*

*Formulas assume 90% mechanical efficiency

I-2

TECHNICAL20,000 PSI



CONNECTION TYPES

JETSTREAM 20K PORT. Specially designed to prevent leakage and wear

frequently associated with standard connectionsby incorporating a replaceable seal assemblythat is hydraulic biased to increase sealing forceas pressure increases.

. Repairing leaks requires only replacement of theseal, compared with standard connectionswhich often require re-coning, or componentreplacement

. Utilized in most Jetstream 20,000 psi products

Several connection types are available for use with Jetstream 20,000 PSI products. The purpose of this section is toallow users to identify the connections needed and provide information on the features and proper use of each.

ACTUAL SIZEReference Chart

50 68

Connection Thread Recommended Torqueft-lbs N-m

1" - 16UNFNote: Always apply thread lubricant (anti-seize) to male threads before

assembling Jetstream 20K Port connections. See Fittings, Page F-1,

for thread lubricants available from Jetstream.


. Enables fast connection and removal of 20,000psi tools

. Utilizes the same hydraulically-biased replace-able seal as the Jetstream 20K Port Connection.

. Hand-tightening is all that is required. A lockingring in the female swivel fitting holds the male fit-ting in place

. Repairing leaks requires only replacement ofthe seal, compared with standard connectionswhich often require re-coning or componentreplacement

. Available on Jetstream 20,000 psi rubber hoses

. Connectors are available to use the QuickDisconnect fitting with any 20,000 psi product

JETSTREAM 20K QUICK DISCONNECT

Jetstream 20K Port Male

Jetstream 20K QD Female

Jetstream 20K QD Male

I-3

TECHNICAL20,000 PSI



. Industry standard connection for 20,000 psi applications

. Connections exist in two different forms:

1. Used to connect medium pressure tubing with a conical male seatand left-handed threads to a female port using a gland nut and left-hand threaded collar (Gland, Collar & Tubing).

2. For many medium pressure male fittings, the geometry of the gland, collar, and tubing is combined into one component that connects directly to a medium pressure female port (Single-Piece Style).

. With proper care, this connection is suitable for repetitive connec-tion/disconnection

. Damage from repeated or improper use can often be repaired usingreconing tools. For details on tubing preparation and repair equip-ment, contact Jetstream Sales.


SizeRecommended Torque

ft-lbs N-m

Connection Instructions1. 3-pc. Male Connection Style only – Liberally apply anti-seize to male

tubing threads to prevent thread galling.

2. 3-pc. Male Connection Style only – Slide gland nut over tubing andthread collar (left-hand threaded) onto tubing until it is past the firstone or two full threads of the tubing.

3. Both styles – Liberally apply anti-seize to male connection threadsand male cone.

4. Both Styles – Install male connection into female port and tightenaccording to torque specification in chart above.

Note: Always apply thread lubricant (anti-seize) to male threads before assembling MediumPressure connections to prevent galling of threads. See page F-1 for available thread lubricants.

CONNECTION TYPESMEDIUM PRESSURE (MP)

Tubing Thread*Left-Hand

GlandConnection Thread

* For three-piece connection styles only

1/4" MP 7/16" - 20UNF 1/4" - 28UNF 20 27

3/8" MP 9/16" - 18UNF 3/8" - 24UNF 30 41

9/16" MP 13/16" - 16UNF 9/16" - 18UNF 50 68

3/4" MP 3/4" - 14NPSM 3/4" - 16UNF 90 122

1" MP 1-3/8" - 12UNF 1" - 14UNF 125 170

JETSTREAM LANCE. Formerly known as Jetstream's "RigidLance" connection

. Commonly found in Jetstream flex andrigid lances and tube nozzles

. Male Jetstream Lance connections will fitinto female right hand medium pressure tube connections, but femaleJetstream Lance connections cannot be used with male medium pres-sure tube connections.

I-4

TECHNICAL20,000 PSI

CONNECTION TYPES



MEDIUM PRESSURE TUBE (MP TUBE)

. Industry standard connection for 20,000 psi applications

. Left-hand threaded connections are used in standard mediumpressure three-piece connection style.

. Both left-hand and right-hand threaded connections are used intube cleaning applications in which the male connection is inserteddirectly into a female connection without the use of a gland and col-lar. For use where standard connections are too large in diameter.


1/4" MP Tube LH 1/4"-28UNF-LH

1/4" MP Tube RH 1/4"-28UNF-RH







1" MP Tube LH 1"-14UNF-LH

Size Recommended Torqueft-lbs N-m

TubeConnection Thread


15 20

25 34

30 41

45 61

70 95

1/4" JS Lance 1/4"-28UNF

3/8" JS Lance 3/8"-24UNF

9/16" JS Lance 9/16"-18UNF


LanceConnection Thread

15 20

25 34

30 41

Note: Always apply thread lubricant (anti-seize) to male threads before assembling mediumpressure connections. See Fittings, Page F-1, for thread lubricants available from Jetstream.

Note: Always apply thread lubricant (anti-seize) tomale threads before assembling Jetstream Lanceconnections. See Fittings, Page F-1, for thread lubri-cants available from Jetstream.

I-5

TECHNICAL20,000 PSI



CONNECTION TYPESTYPE “M”

. Industry standard connection

. Designed for fast, simple connection of waterblast hoses andlances to waterblast equipment

. Male conical seat protected from damage by the hose swivel nut

. Unlike medium pressure connections, the seating surfaces do notrotate against each other when connections are made, resulting ina more reliable, longer lasting connection

. Verify pressure rating of Type "M" hoses and fittings before use asthe connection type is used for a wide range of pressures due to itsease of use and reliability


9/16” Type “M” 9/16” - 18UNF

3/4” Type “M” 3/4” - 16UNF

1” Type “M” 1” - 12UNF

1 5/16” Type “M” 1-5/16" - 12UNF


Connection Thread

30 41

45 61

70 95

110 149

Note: Always apply thread lubricant (anti-seize) to male threads before assembling Type "M"connections. See Fittings, Page F-1, for thread lubricants available from Jetstream.

J-1Jetstream of Houston, LLPPhone: US & Canada: 800-231-8192 or 713-462-7000Web Site: www.waterblast.com


25037 C-11, C-12, H-425117 C-1625118 C-1625132 B-1325165 B-19, B-2925190 C-1625193 C-2, C-625229 C-11, H-425251 B-1325261 C-7, C-825296 C-2, C-4, C-625333 B-1325410 C-1525421 B-2925428 B-1325467 C-2, C-625508 B-1325536 B-1325541 B-1325566 B-2725593 C-10, C-11, C-1225603 C-10, C-1125607 B-21, B-23, B-2525614 G-225617-L G-225617-M G-225617-S G-225617-XL G-225617-XXL G-225620 G-225621 G-225624 G-225625 G-225690 F-1125700 C-10, C-11, C-1225796 C-9, C-1225865-1 C-1625865-2 C-1625865-3 C-1625865P C-1625866 C-1625908 B-19, B-2925928 B-7, B-10, B-1325946 B-7, B-10, B-13, B-17, B-19,

B-21, B-23, B-25, B-27, B-2926051 B-7, B-1026053 B-7, B-10, E-1326116 C-2, C-4, C-626126 C-626145 B-19, B-2926195 B-7, B-1026208 B-7, B-1026212 B-2126220 B-2326247 G-226253 G-226255 G-226259 B-7, B-1026259-1 B-7, B-1026259-2 B-7, B-1026259-3 B-7, B-10

26278B C-1626317 H-426360 B-7, B-10, B-1326361 B-7, B-1026369 B-7, B-1026376 B-7, B-1026389 B-726390 B-7, B-1026416 B-15, B-17, B-21, B-23, B-25,

B-2726444 G-226453 C-7, C-8, C-926455 C-1326462 B-13, B-1926465 B-21, B-23, B-25, B-2726468 B-7, B-10, B-13, B-15, B-17,

B-19, B-21, B-23, B-25, B-27, B-29

26469 B-15, B-17, B-19, B-21, B-23, B-25, B-27, B-29

26478 B-1326479 B-7, B-1026481 B-7, B-1026482 B-726483 B-1326484 B-7, B-10, B-1326486 B-1326487 B-7, B-10, B-17, B-21, B-23,

B-25, B-2726491 B-7, B-10, B-1326492 B-1326495 B-1326495-1 B-1326495-2 B-1326495-3 B-1326496 B-1326500 B-7, B-10, B-15, B-17, B-2526501 B-19, B-2926523 B-1526544 B-2926546 B-15, B-17, B-21, B-23, B-25,

B-2726549 B-15, B-17, B-21, B-23, B-25,

B-2726550 B-15, B-17, B-21, B-23, B-25,

B-2726623 B-13, B-1926635 C-2, C-4, C-6, C-11, C-12, F-2,

F-12, H-426645 C-2, C-4, C-6, C-11, C-12, F-2,

F-12, H-426669 B-2526689 B-15, C-2, C-4, C-626705 B-7, B-10, B-1326711 H-426759 E-7, E-826762 E-2, E-526765 C-1626765S C-1626766 C-1626766S C-16

26769 C-1626776 C-10, C-1326782 C-10, C-1126798 B-7, B-1026802 B-17, B-21, B-23, B-2526869 E-726871 E-526874 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-2926876 B-1526894 G-226899 B-1526916 C-1626919 C-1226931 C-1526932 C-1526933 C-1526959 C-1626960P C-1626961P C-1626962P C-1626967 C-1526974 C-1226978 C-1527009 F-1027019 G-227038 H-427040 H-427042 H-427043 H-427044 H-427045 H-427046 H-427048 H-427049 H-427052 H-427072 E-727073 H-427101 B-7, B-10, B-13, B-17, B-19,

B-21, B-23, B-25, B-27, B-2927107 C-927111 E-1327112 E-1327160 H-427168 G-227187 E-1327192 H-427204 H-427251 C-927350 C-1127414 C-1527415 C-1527437 B-127460 C-1627475 B-21, B-23, B-25, B-2727491 H-427492 H-427497 C-1627497S C-1627503 C-1627503-1 C-16

PART NUMBERS

INDEX20,000 PSI

INDEX20,000 PSI


Copyright Jetstream of Houston, LLP ©2004J-2

27503-2 C-1627503-3 C-1627503-4 C-1627503-5 C-1627504 C-1627505 C-1627550 B-27, B-2727551 B-2727688 C-1627688S C-1627721 F-127729 B-2727796 C-1627863 G-627884 G-127885 G-127960 (Series) F-1327964 F-927966 F-927968 (Series) F-1327969 F-927973 F-1227997 F-928062 B-7, B-10, B-1328180 F-1228181 F-1228184 F-928185 F-1028186 F-1228187 F-1028188 F-1028189 F-1028190 F-1128191 F-1128192 F-828193 F-828195 F-828196 F-828197 F-128229 F-1228268 F-1228268C F-1228268G F-1228268R F-1228299 F-828301 F-928314 F-1428315 F-1428328 F-828330 F-828341 F-1028347 (Series) D-4, D-5, D-628347-0064242 G-528347-02528281 D-228347-02529291 D-228347-02542421 D-228347-05028281 D-228347-05029291 D-228347-05042421 D-228349 F-1428350 F-828382 F-1028383 F-12

28384 F-1228404 E-1728433 F-828435 E-228462 B-29, F-1228484 E-1728487 F-828501 G-228547 E-1728562 E-1728589 G-128592 G-128593 G-128616 B-2928629 F-828631 F-828632 G-228633 G-228634 B-128635 B-128666 F-1428667 F-1428668 F-1428700 F-1428726 F-1228731 F-1228732 F-1228786 F-828797 F-1228804 F-828806 C-1628826 B-728860 G-528861 G-528900 B-1529013 (Series) F-1329019 F-829030 E-1729033 E-17, E-1729057 F-129058 F-829059 F-829060 F-829061 F-829062 F-829063 F-829064 F-829065 F-829066 F-829067 F-929068 F-929069 F-929070 F-929071 F-929072 F-929073 F-929074 F-929075 F-929076 F-1029077 F-1029078 F-1029079 F-1029080 F-10

29081 F-1029082 F-1029083 F-1029084 F-1029085 F-1129086 F-1129087 F-1129088 F-1129089 F-1129090 F-1129091 F-1129092 F-1129093 F-1129094 F-1129095 F-1229096 F-1229097 F-1229098 F-1229099 F-1229100 F-1229101 F-1229102 F-1229103 F-1229103C F-1229103G F-1229103R F-1229104 F-1229104C F-1229104G F-1229104R F-1229105 F-1229105C F-1229105G F-1229105R F-1229106 F-1229106C F-1229106G F-122910GR F-1229108 (Series) F-1329109 (Series) F-1329110 (Series) F-1329111 F-1429112 F-1429113 F-1429114 F-1429115 F-1429116 F-1529117 F-1529118 F-1529119 F-1029120 (Series) D-4, D-5, D-629120-02530301 D-229120-02544441 D-229120-05030301 D-229120-05044441 D-229121 E-829122 E-829123 E-829124 E-829125 E-829126 E-829127 E-829128 E-8

INDEX20,000 PSI



29129 H-429130 H-429131 H-450064 B-1950124 C-2, C-450127 C-2, C-450131 G-450133 G-450134 G-450148 G-450293 B-2550295 B-7, B-10, B-15, B-17, B-21,

B-23, B-25, B-2750301 B-17, B-21, B-23, B-25, B-2750306 B-17, B-23, B-25, B-2750465 B-15, B-17, B-21, B-23, B-25,B-2750795 C-10, C-11, C-1250807 B-1350811 C-1050889 B-15, B-17, B-21, B-23, B-25,

B-2750900 C-1051024 G-651038 G-651044 G-651055 G-651279 B-7, B-1051421 B-7, B-1051425 G-651427 G-651431 B-1951487 B-7, B-1051534 B-7, B-1051536 B-7, B-1051538 B-7, B-1051540 B-7, B-1051558 B-1951659 B-7, B-10, B-13, B-15, B-17,

B-19, B-21, B-23, B-25, B-27, B-29

51666 B-13, B-19, B-2951712 B-1351713 B-7, B-1051714 B-2151719 B-2151731 B-7, B-1051732 B-1351733 B-1351736 B-7, B-10, B-17, B-21, B-23,

B-25, B-2751737 B-13, B-1951738 B-1351739 B-1951748 B-1351749 B-1351752 B-1351758 B-19, B-2951761 B-1951766 B-25, B-2751772 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-351773 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-351774 G-351779 G-651780 B-19, B-2951786 B-1951787 B-19, B-2951790 B-15, B-17, B-21, B-23, B-25,

B-2751814 B-15, B-17, B-21, B-23, B-25,

B-2751818 B-17, B-2551826 B-17, B-21, B-23, B-2551828 B-17, B-21, B-23, B-2551829 B-17, B-21, B-23, B-2551832 B-17, B-21, B-23, B-25, B-2751836 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-351837 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-351838 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-351849 B-1951851 B-1951857 B-17, B-21, B-23, B-25, B-2751864 C-7, H-451869 C-1, C-2, C-5, C-6, C-7, C-9,

H-451874 C-2, C-4, C-6, H-451890 G-351903 C-1451903A C-1451916 F-1651917 C-15, F-2, H-451919 (Series) F-1351921 (Series) F-1351929 F-2, F-551933 (Series) D-851934 (Series) D-851936 (Series) D-851937 E-1251938 E-1251939 E-1251952 (Series) D-3, D-4, D-5, D-751953 (Series) D-3, D-4, D-5, D-751954 (Series) D-3, D-4, D-5, D-751954-0063939 G-551954-02539391 D-251954-05039391 D-251955 B-21, B-23, B-2551956 E-1251958 E-1251963 C-1451968 B-19, B-2951970 B-19, B-2951974 B-2151975 B-1751978 E-6, H-451979 E-6, H-451980 E-6, H-451981 E-6, H-451982 E-651983 E-651984 E-6

51985 E-651986 E-651987 E-651991 B-2151995 B-1652000 B-1652018 E-1252021 E-1252030 G-452031 F-752032 F-752035 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-352038 F-652039 F-652040 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, C-2, C-4, C-6, C-10, C-11, C-12, C-13, C-14, C-15, D-1, F-2, F-2, F-3,F-4, F-5, F-6, G-3, G-4, H-4

52041 C-15, F-2, H-452042 G-452043 B-15, B-17, B-19, B-21, B-23,

B-25, B-27, B-29, G-352044 C-11, C-12, F-2, F-3, H-452050 C-1452050A C-1452073 F-5, H-452075 B-1852076 C-10, C-11, C-12, F-4, H-452077 B-1352080 B-1852081 F-1652082 F-1652083 F-1652084 F-1652086 F-1652087 F-1652088 F-1452090 B-2052110 B-1152114 B-1552115 B-1152120 B-552125 B-552144 C-1152157 E-2, E-552158 E-552160 B-2452172 E-2, E-552173 E-552179 F-752181 F-752182 F-752187 F-652188 F-652189 F-652190 C-1052191 F-752193 F-652196 B-2352197 B-2352201 C-10, C-11

INDEX20,000 PSI



52202 C-1052206 C-1052209 F-252210 E-452221 C-1052242 G-652250 C-1352251 C-1352252 C-1352255 C-10, C-1152305 E-2, E-552310 E-752320-05 E-4, E-852320-10 E-852320-15 E-852348 C-1052354 F-352373 F-1452374 F-1452386 E-752390 E-7, E-852437 F-1452438 F-2, F-652452 E-9, E-1152453 E-9, E-1152454 E-9, E-1152456 E-9, E-1152457 E-9, E-1152458 E-952459 E-952461 E-952462 E-952463 E-952464 E-952466 E-952467 E-952486 C-11, C-1252487 B-2352494 B-1552497 F-152498 F-152501 B-17, B-2152502 B-1752504 B-17, B-2152506 B-1652507 B-552509 B-17, B-2152521 F-1452534 (Series) D-1, D-652534-0036366 G-652534-0036367 G-652534-0064242 G-552534-00663695 G-552534-0066467 C-1452534-0254242 D-152534-02542424 D-152534-02563644 D-152534-0504242 D-152534-05042424 D-152534-05063644 D-152534-M H-452540 C-452543 C-4, C-8

52545 B-2252548 E-1252551 E-1252552 F-1552585 B-852588 C-1552589 C-1552599 C-1552624 C-1352626 C-1252627 C-1252640 C-4, C-3, C-852644 E-1152646 F-1652647 F-1652648 F-1652650 C-452664 C-1252667 F-752668 F-652685 C-1152688 E-9, E-1152689 E-9, E-1152700 C-1252704 C-1652705 C-1552715 C-1552720 C-1252725 C-1252731 E-10, E-1152732 E-10, E-1152733 E-10, E-1152734 E-10, E-1152735 C-1652736 E-10, E-1152737 E-10, E-1152738 E-552739 E-552741 E-552742 E-552743 E-552744 E-552746 E-552747 E-6, H-452748 E-6, H-452749 E-6, H-452751 E-6, H-452752 E-652753 H-452756 H-452757 H-452762 H-452764 H-452766 F-1452767 F-1452803 E-752819 H-452847 E-1352853 E-1352856 E-1352860 E-1352935 E-1352953 E-13

52954 E-1352956 E-1352958 H-453037 F-453038 F-453063 (Series) F-1353093 H-453094 H-453096 H-453097 H-453113 E-1353149 F-1453150 H-253155 H-253169 E-1353175 C-2, C-653204 E-6, H-453205 E-6, H-453206 E-653207 E-653215 C-2, C-653221 F-1453230 C-153242 B-17, B-19, B-21, B-23, B-25,

B-2953245 C-2, C-653260 C-2, C-653279 (Series) F-1353280 (Series) F-1353281 (Series) F-1353282 F-1453283 F-1453284 F-353292 C-2, C-653295 C-2, C-4, C-653296 B-2153303 C-2, C-4, C-653304 C-2, C-4, C-653305 C-153320 C-753331 E-653343 H-453369 C-7, C-9, H-453370 C-553373 C-7, C-853386 C-7, C-853395 H-453396 H-453400 C-653405 H-453408 C-653409 C-653420 C-553423 C-953424 C-953429 H-453445 C-953502 E-253503 E-253580 B-2653590 B-2753599 B-2753600 B-10

INDEX20,000 PSI



53601 B-2753602 B-2753632 B-7, B-1053643 E-353644 E-353646 E-353647 E-353648 E-353649 E-353660 B-2053667 C-453681 B-1353793 B-2753816 (Series) D-3, D-4, D-5, D-753816-0064040 G-553816-02528281 D-253816-02540401 D-253816-05028281 D-253816-05040401 D-253821 H-453823 H-453844 E-153877 E-353967 F-1654017 E-354018 E-354019 E-354021 E-354022 E-354174 F-1554176 F-1554222 (Series) D-854223 (Series) D-854256 E-1254258 E-1254275 E-154276 E-254277 E-254282 E-354283 E-354284 E-354285 E-154297 E-354331 E-254332 E-254333 E-254334 E-254335 C-354336 E-254337 E-254338 E-254365 C-254375 C-154386 (Series) D-854387 (Series) D-854388 (Series) D-854389 (Series) D-854392 C-854395 C-354400 C-454425 C-154426 B-2954430 C-2

54441 E-354442 E-354443 E-354452 E-754460 C-854493 B-2954498 B-2954504 B-2954509 B-2954530 E-754535 E-754565 B-2854584 C-1154587 C-1154591 C-1154592 C-1154627 B-1554638 B-1554690 B-1554731 (Series) D-854732 (Series) D-854733 (Series) D-854737 F-354738 F-354739 F-354740 G-554741 F-354743 F-554744 F-554745 G-554746 F-454747 F-554748 F-554749 F-354750 G-554752 F-754753 F-754754 F-1154755 G-554758 F-1154760 C-1254761 F-1154762 F-1154763 F-1154764 F-1154765 B-354766 F-1154767 F-1154768 F-1154769 (Series) F-1354780 B-2054781 (Series) F-1354782 (Series) F-1354783 (Series) F-1354784 (Series) F-1354786 (Series) F-1354787 (Series) F-1354788 (Series) F-1354789 (Series) F-1354790 B-2254791 (Series) F-1354792 F-1454793 (Series) D-8

54794 (Series) D-854795 B-2454796 (Series) D-854797 (Series) D-854798 (Series) D-854799 (Series) D-854801 (Series) D-854802 (Series) D-854803 (Series) D-854805 E-854824 B-1554825 B-1454826 B-1554827 B-1554828 B-1554844 B-1554846 B-1554847 B-1554854 B-1554856 B-1554868 E-6, H-454869 E-6, H-454871 E-654874 E-6, H-454876 E-654877 E-654878 E-654879 E-654881 E-6, H-454882 E-6, H-454883 E-6, H-454884 E-10, E-1154886 E-10, E-1154887 E-1154888 E-1754889 E-1754891 H-454892 H-454893 H-454894 H-454896 H-454897 H-454898 H-454899 H-499358 C-1699358-1 C-1699358-2 C-1699358-3 C-16HPE1 (Series) E-15HPE2 (Series) E-15HPE3 (Series) E-15HPEL1 (Series) E-15HPEL2 (Series) E-15HPEL3 (Series) E-15HPF1 (Series) E-14HPF2 (Series) E-14HPF3 (Series) E-14HPFL1 (Series) E-14HPFL2 (Series) E-14HPFL3 (Series) E-14HPM1 (Series) E-16HPM2 (Series) E-16HPM3 (Series) E-16

INDEX20,000 PSI



Abrasive Cutting Nozzle, E-17Abrasive Cutting Systems, VAdapters,

See FittingsAir-Operated Diverter Valve, C-9Anti-Seize, Thread, F-1Anti-Vibration Fittings,

See Fittings, Anti-VibrationApparel, Safety, G-1 - G-2Backout Preventers, Pipe Cleaning Nozzle, E-8Bags, Filter, C-16Bareshaft Pumps,

See UNx Bareshaft PumpsBody Protection, G-1 - G-2Boots, G-2Bypass Valve, C-11Cap Nozzles, Tube Spinner, E-12Carbide Nozzles, E-2, E-5, E-6, E-9, E-11, E-17, H-4Cartridges

Air-Operated Diverter Valve, C-9Bypass Valve, C-11C-20, C-1, C-2, C-5, C-6, C-7, C-9, H-1, H-3, H-4CPSi-20, C-3, C-4, C-8DuraSafe Dump Style Guns, C-1, C-2, C-5, C-6, C-7DuraSafe Shut-In Guns, C-3, C-4, C-8High Pressure Swivel, H-1, H-3 - 4Hydro-Mower, H-1, H-3 - 4Hydro-Throttle, C-14Multi-Gun Valve (MGV), C-10Severe Service Relief Valve, G-4Shut-In Regulator Valve, C-12Uni-Valve, B-15, B-17, B-19, B-21, B-23, B-25, B-27, B-29

CD-ROMSThe Advanced UNx Waterblast Pump, B-1Waterblast Safety, G-2

Centralizers, Pipe Cleaning Nozzle, E-8Chaps, Turtleskin, G-1Checks, Hose, G-6Collars, Medium Pressure, F-12Connection Specifications

Jetstream Lance, I-4Jetstream Port, I-2Jetstream Quick Disconnect, I-2Medium Pressure, I-3Medium Pressure Tube, I-4Type "M", I-5

Connectors,See Fittings

Control GunsDump Style, C-1 - 2, C-5 - 6, C-7Electric, C-5 - 6Foot, C-7 - 8Hand, C-1 - 6Shut-In, C-3 - 4, C-8

Conversion Table, Measurement, I-1Conversions, Fluid End,

See UNx Fluid EndsCouplings,

See Fittings, CouplingsCrosses,

See Fittings, Crosses

Custom Units, A-4Cutting Nozzle, E-17Cutting Systems, VDiesel Units, A-1 - 2Discs, Rupture, G-3Diverter Valve, Air Operated, C-9Dril-Jet Nozzles, E-13Dump Style Guns, C-1 - 2, C-5 - 6, C-7DuraSafe Foot Guns

Dump Style, C-7Shut-In, C-8

DuraSafe Hand GunsAbrasive Cutting Nozzle for, E-17Dump Style, C-1 - 2, C-5 - 6Electric, C-3 - 4HP Nozzles for, E-6Orbi-Jet Nozzle for, E-4 - 5Orbi-Jet QCX Nozzle for, E-1 - 3Shut-In, C-3 - 4

DuraSafe Safety Shroud, G-5DVD's

Waterblast Safety, G-2The Advanced UNx Waterblast Pump, B-1

Elbows,See Fittings, Elbows

Electric Dump Style Guns, C-5 - 6Electric Units, A-3 - 4Elements, Filter

High Pressure In-Line, C-15Low Pressure, C-16

End Fittings, Hoses & Lances, D-5Extensions

Orbi-Jet Nozzle, E-4Orbi-Jet QCX Nozzle, E-1RotoMag Nozzle, E-8

Face Shield, G-2Fan Tips, E-6, H-4Filter Bags, C-16Filter Elements

High Pressure In-Line, C-15Low Pressure, C-16

FiltersHigh Pressure In-Line, C-15Low Pressure, C-16

FittingsAnti-VibrationJetstream Lance Rigid Lance Holders, F-16Medium Pressure Gland Assemblies, F-12Medium Pressure Rigid Lance Holder, F-15Collars, Medium Pressure, F-12Connection Specifications

Jetstream Lance, I-4Jetstream Port, I-2Jetstream Quick Disconnect, I-2Medium Pressure, I-3Medium Pressure Tube, I-4Type "M", I-5

CouplingsMedium Pressure Straight, F-10Medium Pressure Union, F-10Quick Connect, F-11

PRODUCTS

INDEX20,000 PSI



Fittings, Couplings (cont'd)Slimline, F-14

Crosses, Medium Pressure, F-9Flex Lance, F-13 - F-16Gland Assemblies, Medium Pressure Anti-Vibration, F-12Gland Nuts, Medium Pressure, F-12Hose End, D-5Jetstream Lance, Connection Specifications, I-4Jetstream Lance Female

to Jetstream Lance Female, F-14to Jetstream Quick Disconnect Male, F-16to Medium Pressure Tube Female, F-13

Jetstream Lance Maleto Jetstream Lance Male, F-13, F-14to Jetstream Quick Disconnect Male, F-16to Medium Pressure Tube Female, F-15to Medium Pressure Tube Male, F-13

Jetstream Lance Nipples, F-13 - F-14Jetstream Lance Rigid Lance Holders, F-16Jetstream Port, Connection Specifications, I-2Jetstream Port Female

to Jetstream Quick Disconnect Male, F-4to Medium Pressure Female, F-4to Type "M" Male, F-5

Jetstream Port Maleto Jetstream Port Male, F-2to Jetstream Quick Disconnect Female, F-2to Jetstream Quick Disconnect Male, F-2to Medium Pressure Female, F-3to Medium Pressure Male, F-3to Type "M" Male, F-3

Jetstream Port Nipple, F-2Jetstream Port Plug, F-4Jetstream Port Tee, F-5Jetstream Quick Disconnect, Connection Specifications, I-2Jetstream Quick Disconnect Female

to Jetstream Port Male, F-2to Medium Pressure Female, F-6to Medium Pressure Male, F-6to Type "M" Male, F-6

Jetstream Quick Disconnect Maleto Jetstream Lance Female, F-16to Jetstream Lance Male, F-16to Jetstream Port Female, F-4to Jetstream Port Male, F-2to Medium Pressure Female, F-7to Medium Pressure Male, F-7to Type "M" Male, F-7

Lance, F-13 - F-16Medium Pressure, Connection Specifications, I-3Medium Pressure Anti-Vibration Gland Assemblies, F-12Medium Pressure Collars, F-12Medium Pressure Couplings

Quick Connect, F-11Slimline, F-14Straight, F-10Union, F-10

Medium Pressure Crosses, F-9Medium Pressure Elbows, F-9Medium Pressure Female

to Jetstream Port Female, F-4

Fittings, Medium Pressure Female (cont'd)to Jetstream Port Male, F-3to Jetstream Quick Disconnect Female, F-6to Jetstream Quick Disconnect Male, F-7to Medium Pressure Male, F-12

Medium Pressure Gland Nuts, F-12Medium Pressure Male

to Jetstream Port Male, F-3to Jetstream Quick Disconnect Female, F-6to Jetstream Quick Disconnect Male, F-7to Medium Pressure Female, F-12to Medium Pressure Male, F-11

Medium Pressure Nipples, F-13Medium Pressure Plugs, F-12Medium Pressure Quick Connect Couplings, F-11Medium Pressure Rigid Lance Holder, F-15Medium Pressure Tees, F-9Medium Pressure Tube, Connection Specifications, I-4Medium Pressure Tube Female

to Jetstream Lance Female, F-14to Jetstream Lance Male, F-15to Medium Pressure Female, F-15

Medium Pressure Tube Maleto Jetstream Lance Male, F-13to Medium Pressure Tube Male, F-13

Multi-Port Adapter, F-5Nipples

Jetstream Lance, F-13, F-14Jetstream Port, F-2Medium Pressure, F-13

PlugsJetstream Port, F-4Medium Pressure, F-12

Quick Connect Couplings, F-11Rigid Lance, F-13 - F-16Rigid Lance Holders, F-15, F-16Slimline Couplings, F-14Tees

Jetstream Port Female, F-5Medium Pressure, F-9

Type "M", Connection Specifications, I-5Type "M" Male

Quick Connect, F-11to Jetstream Port Female, F-5to Jetstream Port Male, F-3to Jetstream Quick Disconnect Female, F-6to Jetstream Quick Disconnect Male, F-7to Medium Pressure Male, F-8to Type "M" Male, F-8

Flex Lance Fittings, See Fittings, Flex Lance

Flex Lance Safety Grip, G-6Flex Lance Strain Relief Hose, G-6Flex Lances, D-3, D-5 - 7Fluid Ends,

See UNx Fluid EndsFoot Guns, C-7 - 8Foot Protection, G-1 - G-2Formulas, I-1Gaiters, Turtleskin, G-1Gauges, Pressure, F-1

INDEX20,000 PSI



Gauntlets, Turtleskin, G-1Gland Nuts, Medium Pressure, F-12Gloves, G-1 - G-2Guns, See Control GunsHand Adjustable Shut-In Regulator Valve, C-12Hand Guns, C-1 - 6Hand-Adjustable Bypass Valve, C-11Hard Hats, G-2High Pressure In-Line Filter, C-15High Pressure Swivel, H-1, H-3 - 4Hose Checks, G-6Hoses

Custom Order, D-1, D-4 - 5Hydro-Throttle, C-14Rubber, D-1, D-6Safety, G-5, G-6Strain Relief, G-6Thermoplastic, D-2, D-4 - 7

HP Nozzles, E-6, H-4HPE Nozzles, E-15HPF Nozzles, E-14HPM Nozzles, E-16Hydro-Mower Surface Cleaners, H-1 - 4Hydro-Throttle, C-14In-Line Filter, C-15Jetstream Lance Fittings,

See Fittings, Jetstream LanceJetstream Port Fittings,

See Fittings, Jetstream PortJetstream Quick Disconnect Fittings,

See Fittings, Jetstream Quick DisconnectLance Fittings,

See Fittings, LanceLances

Flex, D-3, D-5 - 7Rigid, D-8 - 9

Lubricants, Thread, F-1Medium Pressure Fittings,

See Fittings, Medium PressureMedium Pressure Tube Fittings,

See Fittings, Medium Pressure TubeMGV, C-10Mowers, H-1 - 4Multi-Gun Valve (MGV), C-10Nipples,

See Fittings, NipplesNozzle Plugs

Orbi-Jet QCX, E-2RotoMag, E-7 E-8

Nozzle Shut-Off Valve (NSOV), C-13Nozzles

Abrasive Cutting, E-17Carbide, E-2, E-5, E-6, E-9, E-11, E-17, H-4Cutting, E-17Dril-Jet, E-13Fan Tip, E-6, H-4Hand Gun, E-1 - 3, E-4 - 5, E-6, E-17HP Series, E-6, H-4HPE Series, E-15HPF Series, E-14

Nozzles (cont'd) HPM Series, E-16OR Series, E-5Orbi-Jet, E-4 - 5Orbi-Jet QCX, E-1 - 3ORS Series, E-5OX Series, E-2Pipe Cleaning, E-7 - 11Replaceable Tip, E-2, E-3, E-5, E-6, E-9, E-10, H-4RM Series, E-9, E-11RMS Nozzles, E-10, E-11RotoMag, E-7 - 10Sapphire, E-3, E-5, E-6, E-10, E-11, E-17, H-4Self-Rotating, E-1 - 3, E-4 - 5, E-7 - 10, E-12, E-13Surface Cleaning, E-1 - 3, E-4 - 5, E-6, H-4Surface Cleaning, E-1 - 6Tube Cleaning, E-12 - 16Tube Spinner, E-12UHPX Series, E-3

NSOV, C-13Orbi-Jet Nozzle, E-4 - 5

Extensions, E-4OR Series Carbide Nozzles for, E-5ORS Series Sapphire Nozzles for, E-5

Orbi-Jet QCX Nozzle, E-1 - 3Conversion Kit, E-1Extensions, E-1Nozzle Plugs, E-2OX Series Carbide Nozzles for, E-2UHPX Series Carbide Nozzles for, E-3

OX Nozzles, E-2Parts,

See Replacement PartsPipe Cleaning Nozzles, E-7 - 11

RM Series, E-9, E-11RMS Series, E-10, E-11RotoMag, E-7 - 10

Pipe Cleaning Systems, IVPlugs

Medium Pressure, F-12Orbi-Jet QCX, E-2Pipe Cleaning Nozzle, E-7, E-8

Port Fittings, See Fittings, Jetstream Port

Pressure Control DevicesDiverter Valve, C-9Foot Guns, C-7 - 8Hand Control Guns, C-1 - 6Hand-Adjustable Bypass Valve, C-11Hand-Adjustable Shut-In Regulator Valve, C-12Multi-Gun Valve (MGV), C-10

Pressure Drop CurvesFlex Lances, D-6 - 7Hoses, D-6 - 7Rigid Lances, D-9

Pressure Gauges, F-1Pressure Relief Devices

Rupture Disc Holders, G-3Severe Service Relief Valve, G-4

Pumps,See UNx Fluid Ends & UNx Bareshaft Pumps

I N D E X20,000 PSI



J-9

Quick Disconnect Fittings, See Fittings, Jetstream Quick Disconnect, See Also Fittings, Quick Connect

Rain Suits, G-2Regulator Valve, C-12Relief Valves, G-4Replacement Parts

Abrasive Cutting Nozzle, E-17Air-Operated Diverter Valve, C-9Bypass Valve, C-11Dril-Jet Nozzle, E-13DuraSafe Foot Control Dump Style Gun, C-7DuraSafe Foot Control Shut-In Gun, C-8DuraSafe Hand Control Dump Style Guns, C-2DuraSafe Hand Control Electric Dump Style Guns, C-6DuraSafe Hand Control Shut-In Guns, C-4High Pressure In-Line Filter, C-15High Pressure Swivel, H-3 - 4H y d r o - M o w e r, H-3 - 4Low Pressure Filters, C-16Multi-Gun Valve (MGV), C-10Nozzle Shut-Off Valve (NSOV), C-13Orbi-Jet Nozzle, E-5Orbi-Jet QCX Nozzle, E-2Rotary Union, H-3 - 4RotoMag Nozzle, E-7Rupture Disc Holders, G-3Severe Service Relief Valve, G-4Shut-In Regulator Valve, C-12Spray Bar A s s e m b l y, H-3 - 4UNx Bareshaft Pumps - Jetstream Model 3020, B-13UNx Bareshaft Pumps - Jetstream Model 3620, B-10UNx Bareshaft Pumps - Jetstream Model 4220, B-7UNx Fluid End - Butterworth L-375 Pumps, B-23UNx Fluid End - Butterworth L-450 Pumps, B-21UNx Fluid End - Gardner-Denver TF-375 Pumps, B-23UNx Fluid End - Gardner-Denver TF-450 Pumps, B-21UNx Fluid End - Jetstream Model 3020, B-19UNx Fluid End - Jetstream Model 3620, B-17UNx Fluid End - Jetstream Model 4220, B-17UNx Fluid End - Jetstream Model 5020Q, B-15UNx Fluid End - NLB Quintuplex Pumps (up to 250 hp), B-27UNx Fluid End - NLB Triplex Pumps (150 to 225 hp), B-25UNx Fluid End - Woma 150 Series Pumps, B-29

Right Start Program, A - 4Rigid Lance Fittings,

See Fittings, Rigid LanceRigid Lances, D-8 - 9RM Nozzles, E-9, E-11RMS Nozzles, E-10, E-11Rotary Union, Hydro-Mower, H-1, H-3 - 4Rotating Nozzles,

See Nozzles, Self-RotatingRotoMag Nozzle, E-7 - 10

Backout Preventers, E-8Centralizers, E-8Extensions, E-8Plugs, E-8RM Series Carbide Nozzles for, E-9RMS Series Sapphire Nozzles for, E-10

Rubber Hoses, D-1, D-6Rupture Disc Holders, G-3Rupture Discs, G-3S a f e t y

Apparel, G-1 - G-2Backout Preventers, E-8Flex Lance Safety Grip, G-6Glasses, G-2Hose Checks, G-6Hoses, G-5, G-6Rupture Disc Holders, G-3Severe Service Relief Valve, G-4Shrouds, G-5Signs, G-2Tape, G-2Turtleskin Water A r m o r, G-1Video, G-2

Safety Heads, See Rupture Disc Holders

Sapphire Nozzles, E-3, E-5, E-6, E-10, E-11, E-17, H-4Shin Protection, G-1 - G-2Shut-In Guns, C-3 - 4, C-8Shut-In Regulator Valve, C-12Signs, G-2Skid Unit,

See UnitsSlimline Couplings,

See Fittings, Slimline CouplingsSpinning Nozzles,

See Nozzles, Self-RotatingSpray Bar Assemblies, H-2, H-3 - 4Stationary Skid Units,

See UnitsStingers,

See Fittings, NipplesSurface Cleaners, H-1 - 4Surface Cleaning Nozzles, E-1 - 6, H-4

H P Series, E-6, H-4OR Series, E-5Orbi-Jet, E-4 - 5Orbi-Jet QCX, E-1 - 3ORS Series, E-5

OX Series, E-2UHPX Series, E-3

Surface Cleaning Systems, VSwivel, High Pressure, H-1, H-3 - 4S y s t e m s

Abrasive Cutting, VPipe Cleaning, IVSurface Cleaning, IV, VTube Cleaning, IV

Tees,See Fittings, Te e s

Thermoplastic Hoses, D-2, D-4 - 7Thread Lubricants, F-1Throttle Control, Hydro-Throttle, C-14Tips,

See Nozzles, Replaceable Ti pTrailer Units,

See Units

INDEX20,000 PSI



Tube Cleaning Nozzles, E-12 - 16Dril-Jet Nozzles, E-13HPE Nozzles, E-15HPF Nozzles, E-14HPM Nozzles, E-16Tube Spinner Nozzles, E-12

Tube Cleaning Systems, IVTube Spinner Nozzles, E-12Turtleskin Water Armor, G-1Type "M" Fittings,

See Fittings, Type "M"UHPX Nozzles, E-3Union, Rotary, Hydro-Mower, H-1, H-3 - 4Unit Conversion Table, I-1Units

Custom, A-4Diesel, A-1 - 2Electric, A-3 - 4

Uni-Valves, B-15, B-17, B-19, B-21, B-23, B-25, B-27, B-29UNx Bareshaft Pumps

Features and Benefits, B-1 - 2UNx Bareshaft Pumps (cont'd)

Model 3020, B-11 - 13Model 3620, B-8 - 10Model 4220, B-5 - 7Model 5020Q, B-3 - 4

UNx Fluid EndsFeatures and Benefits, B-1 - 2For Butterworth L-375 Pumps, B-22 - 23For Butterworth L-450 Pumps, B-20 - 21For Gardner-Denver TF-375 Pumps, B-22 - 23For Gardner-Denver TF-450 Pumps, B-20 - 21For NLB Quintuplex Pumps (up to 250 hp), B-26 - 27For NLB Triplex Pumps (150 to 225 hp), B-24 - 25For Woma 150 Series Pumps, B-28 - 29Jetstream Model 3020, B-18 - 19Jetstream Model 3620, B-16 - 17Jetstream Model 4220, B-16 - 17Jetstream Model 5020Q, B-14 - 15

Upper Torso Protection, Turtleskin, G-1Valves

Bypass, C-11Diverter, C-9Foot Controlled, C-7, C-8Multi-Gun, C-10Nozzle Shut-Off, C-13Relief, G-4Shut-In Regulator, C-12Uni-Valve, B-15, B-17, B-19, B-21, B-23, B-25, B-27, B-29

VideosThe Advanced UNx Waterblast Pump, B-1Waterblast Safety, G-2

Waterblast Units, See Units

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________

______________________________________________



NOTES

Jetstream has manufactured waterblast systems,pumps, accessories, and replacement parts for over 20 years using every function from Research &Development to Manufacturing and Shipping to consistently provide the best value to its customers.

It has built and maintained a solid reputation of goodcustomer service, high quality, and quick responsetime. In a relentless quest to provide the industry’s best service, Jetstream has undergone a thorough overhaulof its manufacturing systems to employ the best technologies and practices available, such as ValueStream Mapping, 5S, Kaizen, and Six Sigma to continuously improve its ability to provide the best value to its customers.

Jetstream has revamped the manufacturing facilityfrom the ground up to better focus on the customer’sneeds while passionately pursuing the elimination ofwaste. Less waste means shorter lead-times, superiorquality, and consistently competitive prices. All parts are manufactured on cutting edge, high precision CNCmachine tools in which substantial investments wererecently made to upgrade tooling and fixtures.

All critical components are manufactured in-house tothe highest quality standards. Most parts are inspected100% and tested for functionality before being shippedto the customer. Jetstream has a very stable workforceand continues to invest in training its workforce to bethe most skilled and flexible in the industry. Everyemployee is highly conscientious and aware of the customer’s specific requirements, and each individual is committed to the highest standards of quality andcustomer responsiveness.

Jetstream has also established strategic alliances with partners and suppliers to be able to supply its customers with a broad array of product offering. With unlimited access to this wide internal and externalsupplier base, a flexible and experienced engineeringstaff, and a supremely capable manufacturing facility,Jetstream’s highly trained Applications and ProductSpecialists are able to accommodate the most challenging and unique customer requirements.

Jetstream of Houston4930 Cranswick

Houston, TX 77041Phone: (713) 462-7000

Fax: (713) 462-5387Toll Free: (800) 231-8192

www.waterblast.comCopyright Jetstream of Houston, LLP ©2004

Visit our Web Site:

www.waterblast.com

P/N 20028

your waterblast solutions provider€¦ · "your waterblast solutions provider" over the...

Documents