ZAO ” PromServis” is a private enterprise that was founded by proficient specialists in nuclear power engineering safety.

We manufacture in-house designed high quality devices that can compete

with the best analogs produced in Russia or in other countries.

ZAO ” PromServis” develops and produces:

up-to-date high-efficiency flow transducers, flowmeters for hot/cold water, heating meters; monitoring and testing systems for rotating equipment (pumps, compressors, ventilators, reducers, rolling mill drives, separate bearing units, etc.);

automated diagnostic, testing and control systems for compound objects (water supply points, pumping stations, treatment plants, etc.) management.

ZAO ” PromServis” :

supplies equipment produced by ZAO “PromServis” and by other leading global manufacturers;

has partnership agreements and contractual relationships with dozens of suppliers and customers in Russia, Ukraine, Kazakhstan, Denmark, Germany and other countries. our key customers are: petroleum refineries, metallurgical works, chemical industry enterprises, water and wastewater treatment plants, nuclear power stations and other nuclear industry enterprises

ZAO “Promservis” has all corresponding permissions, licences and experience to work in the following areas: industrial safety expert examination of technical devices, used at hazardous productions; technical diagnostic, expert inspection and making a conclusion about further running of the devices;

project works, construction-and-assembling operations;

design, assembly, engineering setup, warranty and post-warranty service of energy carrier metering devices; energy inspection of facilities that produce and consume energy of all kinds;

starting-up and adjustment of operation modes and safety devices at boiler plants, heat power stations, etc.

Electromagnetic vortex flowmeters VEPS warranty period – 4 years

designed for conversion of volume flow of water and other ionic-conductive liquids in pipelines into electric output signal (according to modification) and providing information about consumption and volume to external devices.

Energy carrier metering devices

Nominal diameter (DN) of VEPS :

20; 25; 32; 40; 50; 80; 100; 150; 200; 250; 300 mm.

Flowmeters PRAMER-52хх

designed for measurement of volume flow and total volume in one or two filled pipelines; measurement of continuous operation period; data backup in non-volatile memory; indication of results and data transmission to external devices.

Electromagnetic flowmeters

EMIR- PRAMER- 550 warranty period – 4 years

- wide dynamic range (1/1000), - accuracy (±1% in the flow-rate range), - a possibility to measure a reversible stream, - flow meter self-diagnostic functions. Electromagnetic flowmeters are designed for operation under the following environmental conditions:

• temperature : from - 10 С to + 55 С; • relative humidity: up to 95 % (at temperature +35С and lower without moisture condensation) • atmospheric pressure: from 84,0 to 106,7 kPa.

Flow transducer nominal diameters (DN): 15; 25; 32; 40; 50; 65; 80; 100, 150 mm.

Ultrasonic flowmeter

PRAMER – 510

This flowmeter refers to time-and-frequency ultrasonic flowmeters. It operates using the transit-time differential method, based on difference of propagation time for ultrasonic waves travelling down- and against the stream. PRAMER-510 allows to measure liquid consumption in both directions of the flow in pipelines with diameter up to 2000 mm.

Heat meters designed on the basis of flowmeters, produced by

ZAO “Promservis”

Energy saving

ZAO “PromServis” has been carrying out energy inspections for more than 10 years. The company has proficient staff, required regulatory system, all corresponding devices and equipment. Every year our specialists examine hundreds of houses, industrial enterprises and government-financed organizations. They take all required measurements and make a conclusion about energy usage efficiency.

Our main distinction is that we not only develop guidelines for power consumption economy and reduction of heat losses - we are ready to implement the developed energy-efficient project in actual practice.

ZAO "Promservis" has technical conditions, experience and all relevant licences for assembly and startup-setup operations at oil industry and heat-power engineering objects:

• design and survey works, design estimate works at heat- and flowmeters assembly, disassembly, starting-up and adjustment; • maintenance service of heat meters and flowmeters, instrumentation and automated

control systems, computing machinery and processing equipment; • after-sale service of water and heat flow meters, automation devices, control and

measuring equipment; • assembly, starting-up and adjustment of control and measuring instruments and

automatic control systems; • assembly, starting-up, adjustment and maintenance of boiler equipment (heated with

gas or liquid fuel); • reconstruction and retooling of thermal power plants and boiler equipment.

ZAO "PromServis" has a certified non-destructive testing laboratory and licences of Federal Service for Environmental, Technological and Nuclear Supervision for: 1. Expert examination of industrial safety, technical diagnosis and examination of equipment and conducting a conclusion about possibility/ impossibility of further operation of:

lifting cranes, steam and hot-water boilers, steam and hot water pipeworks, equipment operating under pressure more than 0,07 Pa;

bulbs, reservoirs, industrial pipe-lines, pumps and compressors of hazardous chemical, oil refining, petrochemical, gas industrial facilities and other industries that deal with agressive and explosive substances;

drilling and oil field equipment (drilling rigs, well repair units, sucker rod pumping units, blowout equipment, industrial pipe-lines, bulbs, reservoirs);

gas equipment, boilers, processing lines, gas burner units, hot water storage heaters and tankless water heaters, pipelines and internal gas supply systems;

integrated inspection of crane runways.

2. Defectoscopy of drilling and oil field equipment;

3. Duplicates of technical certificates; 4. Industrial safety expert examination of design documents for construction, expansion, reconstruction, technical upgrade, mothballing and liquidation of hazardous industrial facilities (boiler and gas inspection)

Our key customers are: Joint Stock Company “State Scientific Center – Research Institute of Atomic Reactors” (JSC “SSC RIAR”) JSC "Volzhskaya TDK (Territorial Generating Company)" JSC "Dimitrovgradhimmash“(production of chemical engineering) OJSC Rosneft (OOO "Ulyanovsk-Terminal", limited liability corporation) OAO "Zavod KPD-2" (Ulyanovsk) OAO "Zavod ZHBI-3" (Ulyanovsk), OAO "Zavod ZHBI-4" (Ulyanovsk) LUKOIL (OAO LUKOIL- Nizhegorodnefteorgsintez, Nizhniy Novgorod) JSC Russneft , OAO Ulyanovskneft (oil production and oil processing) JSC Russian Railways, and others.

Automated control, monitoring and vibration-based diagnostics systems

Control and testing systems, developed and produced by ZAO "PromServis", are intended for control and testing of pump, compressor, ventilator units, turbines, heat-exchange equipment, systems of radioactive substances cleanup, storage and maintenance in the process of operation. The key point of systems designed by "PromServis" is defining a condition of all nods and components of a unit as a whole, i.e. taking into account their mutual influence. This approach allows to detect existing malfunctions and predict their development as well as to find out their source.

Our steady-state systems are based on hardware and software system "Sadko". They are able to control nearly every combination and quantity of technological, vibroacoustic and specific characteristics, detect current faults, maintain control according to the algorithm of a customer

These systems are successfully applied at Novokuibyshevskiy NPZ, OAO SeverStal; Saratov, Ulyanovsk, Vladimir, Omsk water and wastewater treatment plants.

Portable testing systems “DIES“ series estimate real technical conditions of any rotating equipment , have the following options: predicting of the condition, balancing in its own bearings, repair and operation control of the equipment under diagnosis. “DIES” is applied, for example, at Joint Stock Company “State Scientific Center – Research Institute of Atomic Reactors” (JSC “SSC RIAR”), Kalinin atomic power station, Balakovo atomic power station. In addition to testing systems we can supply automated workstations for maintenance and repair of all kinds of equipment, as we did for OAO LUKOIL- Nizhegorodnefteorgsintez, Nizhniy Novgorod.

The combination of available automatic control system with our testing and control systems, automated workstations and software modules, linking our systems with available automatic control system, can provide brand new maintenance and repair management. This system will automatically take into account real condition of the equipment under testing and predict its condition, terms of routine maintenance, availability of spare parts, change of operation mode, etc.

Energy consumption dispatching system "Sadko-Teplo“ was designed on the basis of software and hardware complex "Sadko“. It is a hardware and software system intended for automated collection and processing of data received from accounting devices (flowmeters, heat meters, electric meters, gas meters).

This system combines possibilities of centralized and distributed control. Emergency information (flowmeter’s turning on/off , fire and security alarm actuation) is transferred to the supervisory console, data link channel with a secondary device becomes available for transmission of stored information that can be used for the purpose of further cost accounting and operating efficiency analysis.

Various versions of automated units BARS -02 for linking and transmitting data were designed and modified in the process of development and improvement of the system. Nowadays we produce BARS - 02 units with Ethernet and GSM modules.

Traffic monitoring system is designed for data accumulation about

intensity of land transport passenger transportation by means of calculation of doorway openings crossings by passengers. This calculation is executed with help of infrared sensors. The key principle of crossing detection is based on reflecting of sensors’ infrared rays. The sensors are installed at the top of vehicle’s doorway openings. The following ways of data transmission to control station are possible: - through GSM-900/1800 (GPRS) cellular channel; - direct data transfer to the portable computer by means of wire connection

with recording device installed at a vehicle.

A block diagram of traffic monitoring system "POTOK"

user interface of software "POTOK- EXPRESS"

Software of the control station provides

- transmission of commands and data from

recording devices at each vehicle;

- data processing and storage;

- data visualization by means of user

interface.

At each passenger transport vehicle one set of the following devices is to be installed: 1) recording device - automated unit for registration and communication BARS -01-T

2) sensors LUCH-M / LUCH- MS - one unit per each doorway opening (not more than 80 cm wide);

Rosatom Another area of our activity is cooperation with the State Atomic Energy Corporation ROSATOM.

The following licences were received:

• a licence for application of data that are defined as state secret information

• a licence for nuclear-power plant operation

• a licence for design and production of equipment for nuclear-power stations

Series of projects with implementation of equipment and automated systems produced by ZAO "PromServis" were carried out at Joint Stock Company “State Scientific Center – Research Institute of Atomic Reactors” (JSC “SSC RIAR”), at Beloyarskaya nuclear power station, Kalinin nuclear power station, Balakovo nuclear power station.

ZAO “PromServis” address: 112, 50 let Oktyabrya st. Dimitrovgrad, Ulyanovsk region 433502 Russian Federation Global Business Department (Director Mr. Denis Bychkov) Tel: +7 (84235) 4-30-02 Fax: +7 (84235) 4-58-32

e-mail: workingbox@gmail.com

Visit us at www.promservis.ru