zap–cuts extreme highs when turned down chooses frequency ...€¦ · • may drop volume a bit...
TRANSCRIPT
Zap–cuts extreme highs when turned down
Input Jack–from previous effect, or amp’s FX Send
Switch–Chooses frequency of Zap control, Fizz is highest, Crackle lowest
Output Jack–connect to the next pedal’s input or FX Return
Amptweaker, LLC3482 Keith Bridge Rd, #345
Cumming, GA 30041
www.amptweaker.com©2017 Amptweaker, LLC
made in USATM
Specs:• Passive EQ impedance: 10K Ohm, must be driven from a buffer, other pedals,
amp’s FX send or active pickups…won’t work well right after hi-z guitar pickups• May drop volume a bit when set on Crackle• Dimensions: 3.7”W X 1.5”D X 2”H• No batteries needed • Weight: 5 ounces
Tips & Tricks:• The highs may sound better with lower settings of the DeFizzerator™, and
brighter amp settings. This can cut through better, without sounding harsh.• Set Amptweaker loops to Post for the most effect with the DeFizzerator• The Fizz setting is VERY high, and may not be audible with some speakers
James Brown, Amp Engineer
Keep those ideas coming!