zedge pro bollard - targetti

Views

PRODUCT CODE DRIVER HEIGHT DISTRIBUTION WATTAGE COLOR TEMP FINISH OPTIONAL + MOUNTING

ZPB — ZEDGE PRO BOLLARD 41 — Integrated 4/1 driver (Non-dimmable / 0-10V / Reverse Phase / Forward Phase)

16 — 16” DP – Deep L3 — 15W 27 — 2700K FE – Ferrite Grey ___ — Blank for no option See page 2

32 — 32” WD – Wide 30 — 3000K HB— Heritage Brown EM1 — Integral Emergency IOTA Battery Pack

40 — 40” AD – Adjustable 35 — 3500K BZ — Bronze RAL8019 MS1 — Photo Cell & PIR Motion Sensor

40 — 4000K WT— White Textured 1 Not compatable with 16in version.

BT — Black Textured

SG — Sandstone Grey

Lumen Maintenance (L70): 50,000hrsCalculation for LED fixtures are based on measurements that comply with IES LM-80.Voltage: Universal Voltage 120-277V AC 50/60HzBUG: B0-U0-G0 (DP Optic) / B0-U0-G1 (WD Optic)IK Rating: IK10IP Rating: IP66Certifications: cULus Wet Listed Tested in accordance with LM-79-08Energy efficient for California installations.Warranty: 5 year limited warrantyAConsult factory for use in marine grade environments. Not to be in direct contact with salt for extended periods of time or used with corrosive agents.

Concept: Professional high-performance LED bollard with an innovative optical system designed to be a true pathway luminaire. Fixture can be used in both indoor and outdoor applications.Materials: Die-cast powder coated aluminum fixture independently sealed optical head and heat sink with anodized powder coated extruded aluminum post. Aesthetically coordinated with no visible hardware betweeen fixture and post. Clean fit seams between fixture and bollard body. AConsult factory for use in marine grade environments.Source: Two high efficiency LED Chip on Board. Optics: The internal optical system is composed of 2 metallized polycarbonate reflectors coupled to two high reflective anodized aluminum reflectors and holographic filters. Louver screen in silk-screen printed extra-clear glass. Available in three different versions: DEEP – deep beam, WIDE – wide beam, ADJUSTABLE – that allows to change from one beam to the other in a uniform way by adjusting the 2 optical systems.Mounting: Available with three different poles heights - 16in, 32in, 40in. 316L grade stainless steel base and stainless steel anti-theft screws. Optional Ground anchor fixing rods for installation in concrete, sold seperately.Driver: Integrated 4/1 driver (Non-dimmable / 0-10V / Reverse Phase / Forward Phase). Optional integral IOTA emergency battery pack or emergency lighting battery pack. Battery will operate fixture at 100% of full output for 90 minutes. Ambitent temperature must not go below 0°C and must not exceed 50°C. Finish: Textured Standard Finishes – Ferrite Grey / Heritage Brown / Bronze RAL 8019 / Plaster White / Deep Black / Sandstone GreyWattage: 15WColor Temperature: 2700K / 3000K / 3500K / 4000KCRI: Ra84, Ra90 available upon request

IP66

Marine

A

Shown in Ferrite Grey Finish

Delivered Lumens: 2700K 3000K 3500K 4000K

Wide Optic 448Lm 470Lm 470Lm 482Lm

Deep Optic 694Lm 728Lm 731Lm 747Lm

Targetti USA - A Targetti Group Company - 750-A W. 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991 - Email: [email protected] - targettiusa.com - 10.28.21 - of 6

ZEDGE PRO BOLLARD Professional LED Bollard

400/

800/

1000

1000

201 115

800

400

201 115

201 115

16” /

32”

/ 40”

4.5”7.9”

MOUNTING (REQUIRED) – CHOOSE ONE

1US34501

Mounting System. Plate for surface installation. AISI 316 stainless steel compatible with dowels to be inserted into 4 holes, 8.5mm (1/4" anchor bolts) Dia. Required for use with 1US2530.

1US34502

Mounting System. Mounting base with ground anchor fixing rods for installation in concrete. AISI 316 stainless steel. Required for use with 1US2530.

1US34502

1US34501

5.7”

INSTALLATION ACCESSORIES:

1US2530

Direct burial brass ingrade j-box. Features stainless steel cover screws and strain relief for power cord, (2) 3/4” NPT bottom holes and (2) 3/4” NPT side holes. Includes (4) 3/4” to 1/2” adaptors and (2) 1/2” NPT plugs. PVC sleeve included, 6"H. (REQUIRED by NEC) 1US2530

6”


ZEDGE PRO BOLLARD

136

65

8,5

3.8”

266

10.4

7”

7.64”

5.35”

2.56”

8.5mm

4.21”


ZEDGE PRO BOLLARD

Installation Diagrams

DIRT/SOIL/GRAVEL

CONCRETE

NOTE: Install according to local and NEC building codes. UL listed j-box supplied by others.

Surface Installation

16”

/ 32”

/ 40

”16

” / 3

2”/ 4

0”

1US34501 Mounting plate for surface installation

1US2530 Direct burial j-box

PVC Sleeve included with j-box

Concrete Pour Installation

CONCRETE

FINISH GRADE

1US2530 Direct burial j-box

Pea gravel allowing for proper drainage

DSMT IP68 quick disconnect cable

DSMT IP68 quick disconnect cable

6”

4” I.D.

1US34502 Base with concrete ground anchors.

7.9”

7.9”

Optical Information

DEEPFor deep lighting of horizontal surfaces where the priority is to light open spaces or wide pathways.

ZEDGE Pro has a unique optical system composed of two independent beams that can configured in different ways to create multiple effects. A DEEP version for deep lighting, a WIDE version for greater uniformity of the light in a longitudinal direction and an ADJUSTABLE version where the optical system is positioned on a special bezel that makes it possible to achieve the two most extreme configurations Deep and Wide, as well as all the points in between depending on different needs.

Every beam is produced by a mini flood optic equipped with a special reflective screen that focuses it and conveys it to a refractive holographic filter positioned horizontally. This intuitive design ensures zero candle emission above zero degrees. The filter ovalizes the beam enhancing the effect in depth or in a longitudinal direction, depending on the position of the optic.

WIDEFor lighting where illuminance uniformity is essential, for example on long private or public walkways with wide spaces between fixtures.

ADJUSTABLEAn innovative solution that makes it possible to obtain different lighting effects with one fixture. Calibrating the beam depending on lighting needs it is possible to obtain an infinite number of lighting effects with just one fixture. Using a watertight Allen key the optical system can be rotated passing from a DEEP to a WIDE effect in a fluid way choosing between a myriad of positions in between to select the one most suitable to meet the project needs.


ZEDGE PRO BOLLARD

Photometry

Isolux Diagram LCS Graph

Mounting Height = 32” B0-U0-G0

DEEP


ZEDGE PRO BOLLARD

Isolux Diagram LCS Graph

Mounting Height = 32” B0-U0-G1

Photometry

WIDE


ZEDGE PRO BOLLARD

zedge pro bollard - targetti

Documents