ZENOTEC CAD/CAM titanium basesZirconium abutments for implant systems

0483

D E N T A L

When it comes to implant-borne restorations, the sheer perfec-

tion afforded by the ZENOTEC system is evident from the very

start: custom-designed CAD/CAM zirconium oxide abutments,

supported on titanium bases which are a perfect fit for the

most important implant systems. With the aid of the 3Shape

AbutmentDesigner™ and ZENOTEC Cad ImplantDesigner soft-

ware applications, highly aesthetic results with optimized emer-

gence profiles can easily be obtained. And it is economical, too.

ZENOTEC titanium bases including lab screw and fixing screw

The perfect fit between the implant and the zirconium oxide framework

Affordable scan abutments for all ZENOTEC titanium bases

Tested by the Fraunhofer Institute (Germany) for Mechanics of Materials IWM

Put your CAD/CAM framework production on an intelligent

basis. With ZENOTEC.

EXPECT THE DIFFERENCE! BY WIELAND.

An intelligent basis for zirconium oxide

The entire CAD/CAM process for implant-borne zirconium

oxide frameworks from initial scan to final insertion offers

tremendous scope for savings.

„In times of digitization, value creation remains where the expertise lies.“

ZENOTEC titanium bases

> Titanium base set made in Germany

> A perfect fit for the implant system

of your choice

> Maximum safety and reliability –

tested by the Fraunhofer Institute

(Germany) for Mechanics of Materials

IWM

> Comprehensive, practice-oriented,

bonding study

> Ideally suited for use with the

ZENOTEC system

In times of innovative CAD / CAM production, a previously un-

tapped potential for success in the laboratory is to be found at

the interface between the implant and framework of high-class

dentures. Until now, conventional system-dependent abutments

have been used, but these are expensive to buy and time-con-

suming to work with. In-depth WIELAND lab tests with the

ZENOTEC CAD/CAM system have now given rise to a new and

impressive solution, ZENOTEC titanium bases, which are

suitablefor many leading implant systems and which enable

highly aesthetic abutments with emergence profiles which

perfectly match the gingiva to be made in the shortest possible

time.

CAD / CAM zirconium oxide frameworks like this have never

been so affordable. The Fraunhofer Institute (Germany) for Me-

chanics of Materials IWM has tested the titanium base system

consisting of scan abutment, titanium base, lab screw and fixing

screw for action of force and durability and given it an unquali-

fied positive evaluation.

Custom-made CAD/CAM implant-borne dentures

perfect system

efficientindividual

As a ZENOTEC user in particular, you can now put the fabrication

of implant-borne restorations on an intelligent basis: with ZENOTEC

titanium bases.

Adhesive bond

(the same for all systems)

Titanium base to fit the

implant system used

compatible

TITANIUM BASES

Colour-coded scan abutments in 4 diameters

Lab screw (red) and fixing screw

Together with the 3Shape AbutmentDesigner™ and ZENOTEC Cad ImplantDesigner

software applications, ZENOTEC supports the manufacture of customised abutments

for major implant systems. To this end, the titanium base system offers the following

components: scan abutments in four diameters, titanium bases to match each respec-

tive implant system, a lab screw for the model and the final fixing screw for insertion.

ZENOTEC provides an intelligent basis for implant-borne dentures

Since the scan abutments have been reduced to just four sizes, the software can identify

the axial direction of the implant and the position of the anti-locking grooves. Suitable

abutment design software applications make it an easy and fast matter to design the

individual abutment once the model has been scanned. The emergence profile can be

modelled to match the situation of the gingiva. The considerably improved red-white

aesthetics obtained in this way can be further refined by customising with WIELAND

ZENOTEC Color Zr. Both abutment and superstructure can be designed in a single pro-

cess and milled together within a single milling job.

The ZENOTEC titanium bases are therefore a further step towards process integrated

CAD/CAM fabrication of highly aesthetic and equally economical prosthetics in the

dental lab. In times of digitization and automation, this offers labs the opportunity to

ensure that value creation will in future remain where the expertise lies. Discover the

difference. With WIELAND.

A perfectly coordinated process in the dental lab

Digital design capabilities for fully anatomic

aesthetic dentures

The integrated ZENOTEC process for implant-borne zirconium oxide frameworks

Insert titanium base in model! Affix suitable scan abutment! Scan and design!

> > >

A perfect fit for leading implant systems

(1) NobelReplace™ is a trademark of Nobel Biocare (2) OsseoSpeed™ is a trademark of Astra Tech AB(3) Frialit® + XIVE® S is a registered trademark of DENTSPLY Friadent (4) OSSEOTITE® is a registered trademark of Biomet 3i(5) Screw-Vent® is a registered trademark of Zimmer Dental (6) Branemark System is a registered trademark of Nobel Biocare (7) NobelActive™ is a trademark of Nobel Biocare (8) OSSEOTITE® Certain® is a registered trademark of Biomet 3i(9) tioLogic© is a registered trademark of Dentaurum (10) manufactured by Dentaurum Implants, Ispringen

The following ZENOTEC titanium base sets /systems from WIELAND Dental + Technik are

compatible with the implant systems listed in the table.

Milling! Sinter! Finished!

> >

Ref.-No. System Implant system Sizes available Color code scan abutment

6925019001 A NobelReplace™ (1) manufactured by Nobel Biocare) narrow platform (NP) Ø 3,5

6925019002 regular platform (RP) Ø 4,3

6925019003 wide platform (WP) Ø 5,0

6925029001 B Standard implant manufactured by Straumann regular neck (RN) Ø 4,8

6925029002 wide neck (WN) Ø 6,5

6925039001 C OsseoSpeed™ (2) manufactured by Astra Tech AB) Ø 3,5/4,0

6925039002 Ø 4,5/5,0

6925039003 extra Gingiva Ø 3,5/4,0

6925039004 extra Gingiva Ø 4,5/5,0

6925049001 D Frialit® (3) + XIVE® S (3) manufactured by DENTSPLY Friadent Ø 3,4

6925049002 Ø 3,8

6925049003 Ø 4,5

6925059001 E OSSEOTITE® (4) manufactured by Biomet 3i Ø 3,4

6925059002 Ø 4,1

6925059003 Ø 5,0

6925069001 F Screw-Vent® Implant system (5) manufactured by Zimmer Ø 3,5

6925069002 Ø 4,5

6925079001 G Nobel Biocare Brånemark System® Mk III (6) narrow platform (NP) Ø 3,5

6925079002 regular platform (RP) Ø 4,1

6925079003 wide platform (WP) Ø 5,1

6925089001 H Bone Level manufactured by Straumann narrow CrossFitTM (NC) Ø 3,3

6925089002 regular CrossFitTM (RC) Ø 4,1

6925099001 I NobelActive™ (7) manufactured by Nobel Biocare narrow platform (NP), Ø 3,5

6925099002 regular platform (RP) Ø 4,3 /5,0

6925109001 J Biomet 3i OSSEOTITE® Certain® (8) Ø 3,4

6925109002 Ø 4,1

6925109003 Ø 5,0

6925119001 tioLogic© (10) Dentaurum Implants (9) Ø S

6925119002 Ø M

6925119003 Ø L

EXPECT THE DIFFERENCE! BY WIELAND.

As a major supplier of dental system solutions, WIELAND embodies both tradition and progress in matters

of dental products and technology. Since our company was founded in 1871, we have stayed true to

our corporate philosophy of combining tradition, innovation and quality with the best in customer care.

Today, our core competencies and key strengths lie in the forward-looking integration of technologies and

materials for dental prosthetics. This ensures that patients can trust in the quality of their dentures, and

our partners in dental practices and laboratories can continue with confidence on the path to digitalisati-

on and greater competitiveness.

WIELAND offers a wide range of products and services from CAD/CAM technologies and

dental alloys to veneering ceramics and electroforming. Thanks to our worldwide presence and internatio-

nal network, WIELAND is never far away, and your contact person can always be located via the Internet.

5300

87e.

04.0

4/12

ZE

NO

TEC

® is

a r

egis

tere

d t

rad

e m

ark

of

WIE

LAN

D.

D E N T A L

www.wieland-dental.de

WIELAND Dental +Technik GmbH & Co. KG

Schwenninger Straße 13, 75179 Pforzheim, Germany

Fon +49 72 31/37 05-0, Fax +49 72 31/35 79 59