zinc phosphate cement اسمنت فوسفات الزنك

18
ZINC PHOSPHATE CEMENT ك ن ز ل ا ات ف س و ف ت ن م س ا

Upload: carlow

Post on 09-Feb-2016

139 views

Category:

Documents


0 download

DESCRIPTION

ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك. CLINICAL USES OF ZINC PHOSPHATE CEMENT. a. Permanent Cementing Medium, Zinc phosphate cement is used to permanently cement crowns, inlays. It is also used to hold splints, orthodontic appliances, and other appliances in place. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

ZINC PHOSPHATE CEMENTالزنك فوسفات اسمنت

Page 2: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

CLINICAL USES OF ZINC PHOSPHATE CEMENT a. Permanent Cementing Medium, Zinc phosphate cement

is used to permanently cement crowns, inlays. It is also used to hold splints, orthodontic appliances, and other appliances in place.

, للتيجان دائم إلصاق كاسمنت الزنك فوسفات أوكسيد يستخدمinlays , غيرها, و التقويم أجهزة الصفائح، لتثبيت وتستخدم

Page 3: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

b. Intermediate Base:A thick mix of zinc phosphate cement is used as an intermediate base beneath a permanent metallic restoration. This layer of cement protects the pulp from sudden temperature changes that may be transmitted by the metallic restoration.

قاعدة : حشوةكمادة يستخدم الزنك فوسفات أكسيد من ثخين مزيج ) الدائمة، ) المعدنية الحشوات تحت قاعدية بينية حشي

تغيرات من اللب تحمي االسمنت من الطبقة هذهالمعدنية الترميم عبر تنقل قد التي المفاجئة الحرارة

Page 4: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

التجاري الشكل : المغنيزيوم- أوكسيد و الزنك أوكسيد بودرة

: بنسبة- الماء و الفوسسفور حمض إذا 2:1 سائلالماء نسبة ستزيد الرطوبة عالي جو في مكشوفا بقي

, زمن فينقص ماء سيخسر جاف جو في و التصلب فسيتسرع , إذا. أو اللون متغير أو ً مغلقا غير يبقى الذي السائل التصلب

. يرمى أن يجب الزجاجة ربع من أقل بقيChemical Composition )1( Powder. The primary ingredients are zinc oxide and magnesium oxide. )2( Liquid. phosphoric acid and water in the ratio of two parts acid to one

part water. Liquids exposed in open bottles will absorb moisture from the air in high humidity. The liquids will lose moisture if humidity is low. Water gain hastens setting; water loss lengthens setting time. Liquid that has been left unstoppered for a long period, or is discolored, or is the last 25 percent portion remaining in the bottle should be discarded.

Page 5: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

Properties

a. Chemical Reaction. The chemical reaction produces heat. The amount of heat produced depends upon the rate of reaction, the size of the mix, and the amount of heat extracted by the mixing slab.

’ , المزج سرعة على تعتمد الحرارة كمية للحرارة منتج الكيميائي التفاعلالزجاجي اللوح قبل من الممتصة الحرارة كمية و المزيج كمية

b. Powder to Liquid Ratio. The less powder used in ratio to the liquid, the longer the cement will take to harden.

: زمن زاد البودرة نسبة نقصت كلما للسائل البودرة نسبةالتصلب

c. Setting Time. 5 and 9 minutes.)1( Lower the temperature of the glass mixing slab, no moisture.)2( mixing cements in increments. )3( Blend the powder slowly. )4( Mix the powder over a large area of the cool slab. )5( Use a longer mixing time, within optimum limits.

بين التصلب :د 9و 3زمنالعمل زمن إلطالة

الزجاجي اللوح بردبهدوء البودرة امزج

دفعات على البودرة أضفالمبرد الزجاجي اللوح من كبيرة مساحة على األكبر امزج

الزمنية الحدود ضمن وقت بأكثر امزج

الخصائص

Page 6: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

Advantages )1( Speed and ease of usage. )2( Sufficient flow to form a thin layer for the

cementing )3( Low thermal conductivity beneath a metallic

restoration.

المزاياالتطبيق- 1 وسرعة سهولة2 , ل- رقيقة طبقة كافية الصاق لسيولةتحت ةضعيف ةكهربائي ناقلية- 3

المعدنية التعويضات

Page 7: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

Disadvantages )1( Low crushing strength that varies between 12,000 and

19,000 psi. )2( Slight solubility in mouth fluids. )3( Opaque material not suitable for visible surfaces.

السيئات:للتهشم- 1 ضعيفة مقاومةب- 2 بسيط بشكل الفم ينحل سوائلللمناطق- 3 مناسبة غير داكنة مادة

المرئية

Page 8: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

المطلوبة - الموادARMAMENTARIUM :

الزنك - فوسفات اسمنتزجاجي - ، glass mixing slabلوح 10

× 20 cm نظيف و مبردمعدني - سباتول

a stainless steel spatula لينة - مواد حشي filling معدنيةأداة

instrument condenserمدك -explorerمسبر -عاج - excavatorمجرفةCottonقطن -

Page 9: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

MANIPULATION 1- fluff the powder for uniform density

متناسقة كثافة على للحصول البودرة هز 2- The measuring scoop is then filled but not packed with powder and leveled with the spatula.

ضغط دون بالسباتول يسوى و البودرة معيار يمأل The required number of drops of liquid is dispensed from the dropper bottle in accordance with the manufacturer's

instructions, By holding the bottle 90 degrees to the glass slab

, على عمودي بشكل السائل زجاجة تحمل بحيث المصنع تعليمات بحسب السائل قطرات من عدد بوضعالزجاجي اللوح

The estimated powder is placed on one end of the slab.

الزجاجي اللوح طرف على المطلوبة البودرة كمية توضع The powder is divided into quarters. Then, the first quarter )only( is divided in half )into eighths(, and the eighth portion

)only( is further divided in half )into sixteenths(. When the process is completed, a total of six portions of powder is readied for mixing

سدس إلى ثمن كل و ثمن إلى األول الربع يقسم ثم من و ألرباع البودرة تقسم An additional small amount of powder is often placed on the corner of the slab for use if the estimated powder is

insufficient for the desired mix.

كاف غير المزيج قوام كان إذا لالستخدام جانبيا تضاف البودرة من إضافية كمية The drops are dispensed over a wide area.

مسافة على السائل كبيرةيمد This slows the setting reaction and enables the user to blend the maximum amount of powder to attain desired

consistency. This will help obtain a cement with optimum physical properties.

, , المطلوب للقوام للوصول البودرة من كمية أكبر إضافة من الطبيب ويمكن المزج زمن يبطأ األسلوب بهذاالمثلى الفيزيائية بالخواص اسمنت على بالحصول يسمح مما

Page 10: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

MIXING Mixing is done by the slow blending of the segments one at a time This procedure aids

in neutralizing the acid and achieving a smooth consistency. A considerable portion of the slab is used Mixing is done with a moderate circular motion of the spatula blade held flat against

the slab. mixing for about two minutes

المزج:- , حدى على األجزاء من لكل بطيء~ بمزج يتم

و الحموضة من التقليل على يساعد هذا. متماسك قوام على الحصول

اللوح - من كبير جزء~ يستخدمبحيث يتم - للسباتول دائرية بحركة المزج

للوح ً مواجها المسطح جزأه يكونالدقيقتين - بحوالي المزج يجرى

Page 11: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك
Page 13: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

A good rule is to spatulate the first three segments for about 15 seconds.

The next two segments should be spatulated for about 20 seconds.

The final segment should be spatulated for 30 to 35 seconds.

If this is done, the mixing time is not critical and completion of the mix will take about 1-2 minutes.

ل~ - األولى الثالث األقسام مزج الجيد 15منثانية

ثانية 20ل~ تاليةال أقسامال -األخير - ثانية 35-30القسمزمن - في مشكلة هنالك يكون فلن ذلك تم إذا

بحوالي, ذلك وسيتم دقيقة 2 – 1المزج

Page 14: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

This type of mixing results in a smooth and adaptable working consistency:

The consistency for luting )cementing( is creamy. It will follow the spatula for about one inch as it is lifted off the glass slab before breaking into a thin thread and flowing back into the mass.

A primary consistency is usually attained at the end of 90 seconds

و ، أملس المزيج سيكون اإلجراءات هذاه نتيجةالعمل لقوام مناسب

- . , السباتول سيتبع لزج لإللصاق المناسب القواماللوح 1تقريباً سطح عن ترفع عندما إنش

االسمنت لكتلة تعود و تنفصل أن قبل الزجاجي،

Page 15: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك
Page 16: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

-The consistency of the base should be putty-like, and the base should be able to be rolled into a ball or cylinder with the flat side

of the spatula .The secondary consistency mix should

be completed within 2 to 2 1/2 minutes from the beginning of the mix.

يكون - أن يجب قاعدة، لعمل القوامألن, قابلة تكون أن ويجب معجوني

بالجانب اسطوانة أو ككرة تجمع. للسباتول المسطح

Page 17: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

Precautions )1( Prevent loss or gain of moisture in

liquid cement by keeping bottles tightly stoppered.

)2( Dispense drops only when ready to mix.

)3( Use a cool, dry glass slab. )4( Use the same brand of powder and

liquid. )5( Add increments of powder slowly. )6( Use the maximum amount of powder to

obtain the desired consistency. )7( Using the large condenser, pick up a

piece and place it into the prepared cavity and lightly condense; the cement should be placed up to 0.5 mm short of the DEJ. Be sure not to contaminate the walls of the cavity. Carefully remove any excess cement.

تنبيهات:رطوبة- 1 كسب أو فقد منع

اإلغالق, بواسطة السائلللزجاجة المحكم

قبل- 2 مباشرة السائل ضعالمزج

جاف- 3 زجاجي لوح استخدمبارد ومن- 4 بودرة و سائل استخدم

الشر~كة نفسببطء- 5 البودرة دفعات أضفمن- 6 قدر أكبر استخدم

القوام لتحقيق البودرةالمالئم

خذ- 7 عريض مدك باستخدامعلى وضعها المزيج من قطعة , بخفة كثف و المحضرة السن

حتى االسمنت تطبيق يجبالملتقى 0.5 من أقل مم

العاجي المينائي

Page 18: ZINC PHOSPHATE CEMENT اسمنت فوسفات الزنك

Cleaning To clean the glass slab and spatula, soak

them in water or a solution of bicarbonate of soda to loosen the hardened cement and then disinfect it.

: األدوات تنظيفأو بالماء انقعها الزجاجي اللوح لتنظيف

لحل الصوديوم، بيكربونات بمحلول . عقمها ثم من و المتصلب االسمنت