In 1981 B.Sc. In Mechanical Engineering, Aeronautical Dep.University of Belgrade ( 5 year's program )

EDUCATION:

DEVELOPMENT, PROGRESS AND DEVELOPMENT, PROGRESS AND ACHIEVEMENTSACHIEVEMENTS

REFERENCES:

The 1983 - 1992 AERONAUTICAL INSTITUTE ( VTI Žarkovo )

Work, the nature of work ( military aviation research and applied program ), or type of institution ( military institute ), have not been presented to the public, except for works created in collaboration with the Military Medical Academy ( VMA ). Were recorded through internal reports and other material resources as well as in the laboratories VTI.

THE WIND TUNNEL LABORATORYTHE WIND TUNNEL LABORATORY Design of single, double and ternary encoder forces and moments, transducers of applied loads of research on models of aircraft, trains (fast track), buildings (roof and other construction) for the subsonic wind tunnel, transonic, supersonic and hypersonic speeds. Work on calibration of different transducers for Aircraft electronics equipment. Monoblock design six component internal balances, for testing model aircraft in terms of subsonic, transonic and supersonic speeds. Designing six multi-part component internal balances, for testing model aircraft in terms of subsonic, transonic and supersonic speeds. Designing 2k devices for testing models of aircraft at high angles of attack for the conditions subsonic and transonic speeds.

Designing rotational balance for exploring the phenomena appear to enter into a tailspin spacecraft models requirements of subsonic, transonic and supersonic speeds.

Work on Aerodynamics research & testing of different Aircraft & rocket models.

Project manager for Investment RECONSTRUCTION Powetrain subsonic wind tunnel (axial compressor diameter 9m, Hofmann blades ) installed capacity 7.5 MW, the value of 1.2 million U.S. dollars.

Work on a software for research & testing different Aircraft electronics equipment. Define the program for the calculation of axial compressor high power. Calculation of subsonic wind tunnel with several aspects of dimensioning Driveline - axial compressor.

Work on computer system design for research & testing different Aircraft electronics Equipment.

METROLOGIJA Initiating work on making Federal Metrology Laboratory (ML) of the first degree for the forces and moments, and Metrology Laboratory of the second degree for the pressure.

PROSTHODONTICS

Investigation and determination of elastic modulus of dental materials. Designing component encoder six forces and moments abutment teeth prosthesis for lower subtotal    cases of "in vitro" (R = 2:1) and "in vivo" (R = 1:1).

Natural size of the measuring element

IN VITRO

Articulator for occlusal design simulation tests "in vitro". Overseeing and monitoring the development of finished projects, calibration, and the introduction of the experiment.

IN VITRO IN VITRO

IN VITRO

IN VIVO IN VIVO

IN VIVO

IN VIVO

Conducting the experiment with full program load tests tooth bottom bracket subtotal prosthesis "in vitro" (in the laboratory) and "in vivo" (in real terms – The patient).

IN VIVOINVESTIGATE THE EFFECTS OF FORCE ON THE LOWER MOUNTS SUBTOTAL PROSTHETIC FANGS

RECOGNITION

- Zoran Stankovic, BSc. is not complaining about the effort and time immense attention to every stage through which passed this test,- Zoranu Stankoviću,dipl.ing. što je ne žaleći truda i vremena neizmernu pažnju posvetio svakoj fazi kroz koju je prolazilo ovo ispitivanje,

The 1992 – 1993 P.P. " IVKO " corporation

OFFICE EQUIPMENT, TELECOMMUNICATIONS AND COMPUTERS Work on service and sales office equipment, telecommunication and computers

The 1993 – 2001 P.P. " J.V.J. " Beograd

SAFETY PROTECTIVE ELECTRICAL - ELECTRONIC DEVICES Conducting work on repairs, servicing high-power UPS (uninterruptible power supply unit electricity).

Work on the design and manufacture of electronic intrusion devices to protect buildings and cars    ( Panel and sensors, ciphertext, remote controls and a multi-channel mobile - wireless ciphertext ). Conducting business in installing and installing electronic systems protect against burglary car. Design and perform the installation electronics intrusion protection system objects.

PRODUCTION Design, supervision and monitoring tools for the development of commercial production of packaging for consumer eggs by thermoforming. The introduction of tools for exploitation, and conquest production winning products, the requirements of ISO standards 9001.

Tool 12 pieces

Bottlenose snaps

Tool 10 pieces

PRODUCT - COMMERCIAL PACKAGING FOR CONSUMER EGGS 10 i 12 ( 2 x 6 ) pieces

For 12 eggs

For 10 eggs

SERVICES Design solutions more ROTO advertising

The 2001 – 2003 J.K.P. ” Komunalac ”

JOBS UTILITIES The management and organization of public utilities. Project management of capital works expansion of water resources, springs, wells, and water intake water supply networks. Our production and delivery of drinking water, as well as operations in the wastewater. Our production and delivery of heat. Jobs cleanliness of public areas. Jobs at the funeral services.

Programs and conducting decontamination of polluted surface treatment chemicals in the function Ecology and Environment, degreasing, cleaning, conservation and deconservation, water and wet blasting buildings in industry and construction.

The 2003 - 2007 P.M.S. ” GEOKOP - inžinjering ”

AFFAIRS OF ECOLOGY AND ENVIRONMENT Design activity on the production of preliminary and detailed analysis of the environmental impacts of the life and health, studies on the assessment of environmental impacts of the life, health and the environment. Treatment of municipal and industrial wastewater. Construction on the study of cases acidentne chemicals in order to protect the environment. The project manager of the mine mineral resources "Latovo“ Associate of the study on the assessment of the environmental impact in determining the basic energy requires superior design and facilities related to energy consumption and CO2 emissions. Preparation of a study on the assessment of the environmental impact of energy recovery facilities with special reference the emission and immission CO2 . Associate on the study and application of pulsed low-frequency magnetic fields and design activity on the study on the assessment of environmental impacts of the life and health of people and the environment. Design and manufacture of medical therapeutic devices for personal use, according to the principle of application electromagnetic pulsed electromagnetic field therapy. http://www.belmag.rs/

The 2007 – 2008 P.M.S. ” INVEJ DOO ”

BUSINESS MANAGEMENT AND CONSULTING FOR MEMBERS HOLDING Management of investment activities, identifying business partners (consulting companies, certification bodies) for cooperation at the level of the holding, monitoring and control, in all states holding INVEJ - and, in environmental issues and waste water treatment. Jobs in Environmental Protection (EMS). Jobs on high-quality water supply for industrial and other purposes. Treatment of industrial waste water production plants in states Holding. Introduction of ISO 14001 states in Holding. Energy rehabilitation of the wine cellar and bottling wines in the "Rubin" Krusevac. Manager and participant in several projects:

Construction Project Manager TV studios Wind (now happy) Project Manager for construction of energy drinks and soft drinks Project manager on derivation etheric oil healing vegetation for “ Rubin “ Kruševac Participant in the project of building the dairy Biodiesel Project participant

The 2008 – 2009 AQUA INTERMA Inženjering D.O.O.

OPERATIONS MANAGEMENT IN PRODUCT PLACEMENT FOR WATER TREATMENT

Of 2008 - Current and parallel, Ministry of Environment of the Republic of Serbia

EXPERT IN JOBS STUDIES ON ECOLOGY AND ENVIRONMENTEngaged as expert independent expert, who by their qualifications and professional resultssatisfy the conditions for the work of the Technical Committee for the evaluation study of assess the impact on the environment.

FREE TIME FOR THE FOLLOWING ISSUES:

Saved photos of some of realized tasks I've worked on and led to the execution of the project

Spear LED lighting, fountains and electrohydraulic actuators, street theater stars great Serbian actors Danilo Bata Stojković

Interior design lighting - LED Lighting

The interior of the cave Risovaca (Aranđelovac)

LED lighting in the apartment

Interior design and furniture

Kitchen units

Living room furniture

Angle and Computer Table

Project

Of a project

AWARDS, RECOGNITION, APPOINTMENTS

INVESTIGATE THE EFFECTS OF FORCE ON THE LOWER MOUNTS SUBTOTAL PROSTHETIC FANGS

RECOGNITION

- Zoran Stankovic, BSc. is not complaining about the effort and time immense attention to every stage through which passed this test,- Zoranu Stankoviću,dipl.ing. što je ne žaleći truda i vremena neizmernu pažnju posvetio svakoj fazi kroz koju je prolazilo ovo ispitivanje,

STRENGTHS: Communication, analytical, quick and quality assessment of the organization andsystem

Management capabilities: I was in a managerial position, I had the responsibility and successin terms of financial results

SPECIAL SKILLS: Solid knowledge in the design and manufacture of various power electronic circuits. Knowledge of material financial operations and related legislation. Good knowledge of innovative technologies for the exploitation of renewable energy sources. Good knowledge matrije energy efficiency, both legal and technical. Driving license Good knowledge of automotive repair and Autoelektrik Fluency in computer diagnostics and programs to remedy the defects modern computerized cars. Good knowledge of automotive gas systems, installations, equipment, programming and installation sequent systems.

HOBBIES: Computers, Cars, Travel, Music, Literature, Business, Politics, Socializing.