zws baf 50w-150w ac-dc power supplies datasheet · zws-baf series 1 zws-baf series 50w to 150w...
TRANSCRIPT
ZWS-BAF Series 1
ZWS-BAF Series50W to 150W Single Output Power Supplies,
Low Cost, Worldwide Use
Key Market Segments & Applications
Factory Automation
Test & Measurement
Light Industrial Equipment
• Universal Input (85 - 265VAC)
• Power Factor Corrected
• Convection Cooled
• 5 year warranty
• Compact Design
ZWS-BAF Features and Benefits
Features Benefits
• Convection Cooled • Better Field Reliability
• 5 Year Warranty • Lower Cost of Ownership
• Power Factor Corrected • Supports Global Use
Specifications
MODELS ZWS50BAF ZWS75BAF ZWS100BAF ZWS150BAF
ITEMS
AC Input Voltage range - 85-265VAC (47-63Hz)
DC Input Voltage range - 120 - 370VDC
Input Current (Typical) (2) A 0.45 / 0.25 1.0 / 0.5 1.3 / 0.65 1.9 / 0.95
Inrush Current (2) A 14 / 28 25°C ambient, cold start
Power Factor (Active) - Meets EN61000-3-2 (Typically 0.98/0.93)
Maximum Ripple and Noise mV 3.3 & 5V: 120mV, 12 to 24V: 150mV, 48V: 200mV
Temperature Coefficient - <0.02%/°C
Overcurrent Protection (1) - >105% of maximum output current
Hold Up Time (Typ) at 100VAC ms 20ms
Leakage Current - 0.5mA max, 0.4mA typ at 230VAC
Remote On / Off - Optional
Operating Temperature (Convection) - -10 to +70°C, derate linearly to 50% load from 50 to 70°C
Operating Temperature (Forced Air) - -10 to +70°C, derate linearly to 75% load from 60 to 70°C
Storage Temperature °C -30 to +75°C
Humidity (non condensing) - Operating: 30 - 90%RH, storage: 10 - 90%RH
Withstand Voltage - I/P to Grnd 2kVAC (10mA), I/P to O/P 3kVAC (10mA), O/P to Grnd 500VAC (20mA) for 1 min.
Isolation Resistance - >100MΩ at 25°C & 70%RH, Output to Ground 500VDC
Vibration (non operating) - 10 - 55Hz (1 minute sweep), 19.6m/s2 constant X, Y, Z 1 hour
Shock - < 196.1 m/s2
Safety Agency Certifications - UL60950-1, CSA60950-1, EN60950-1, EN50178 (OV II), CE Mark
Conducted & Radiated EMI - EN55011/EN55022-B, FCC-B, VCCI-B
Immunity - IEC61000-4-2 (lv 2,3), -3 (lv3), -4 (lv 3), 50/75W: -5 (lv4); 100/150W: -5 (lv 3,4), -6 (lv 3), -8 (lv 4), -11
Weight (Typ) g 165 230 290 390
Size (W x H x D) mm 50 x 26 x 132 50 x 33 x 150 62 x 33 x 155 75 x 37 x 160
Warranty yrs 5
Notes:
(1) Avoid prolonged operation in overload (2) 100 / 200VAC Input
ZWS-BAF Series2
ModelOutput Output Adjust Max Current Max Output Efficiency Load Reg Line Reg OVP
Voltage Range (V) (A) Power(W) (typ) % (mV) (mV) (V)
ZWS50BAF-3 3.3V 2.97-3.63 10 33 79 40 20 3.8-4.95
ZWS50BAF-5 5V 4.5-5.5 10 50 84 40 20 5.75-7
ZWS50BAF-12 12V 10.8-13.2 4.3 51.6 85 96 48 13.8-16.2
ZWS50BAF-15 15V 13.5-16.5 3.5 52.5 86 120 60 17.3-20.3
ZWS50BAF-24 24V 21.6-26.4 2.1 50.4 87 150 96 27.6-32.4
ZWS50BAF-48 48V 43.2-52.8 1.1 52.8 87 240 192 55.2-64.8
ZWS75BAF-3 3.3V 2.97-3.63 15 49.5 79 40 20 3.8-4.95
ZWS75BAF-5 5V 4.5-5.5 15 75 84 40 20 5.75-7
ZWS75BAF-12 12V 10.8-13.2 6.3 75 85 96 48 13.8-16.2
ZWS75BAF-15 15V 13.5-16.5 5 75 86 120 60 17.3-20.3
ZWS75BAF-24 24V 21.6-26.4 3.2 76.8 87 150 96 27.6-32.4
ZWS75BAF-48 48V 43.2-52.8 1.6 76.8 88 240 192 55.2-64.8
ZWS100BAF-3 3.3V 2.97-3.63 20 66 84 40 20 3.79-4.95
ZWS100BAF-5 5V 4.5-5.5 20 100 86 40 20 5.75-7
ZWS100BAF-12 12V 10.8-13.2 8.5 102 88 96 48 13.8-16.2
ZWS100BAF-15 15V 13.5-16.5 6.7 100.5 88 120 60 17.3-20.3
ZWS100BAF-24 24V 21.6-26.4 4.3 103.2 89 150 96 27.6-32.4
ZWS100BAF-48 48V 39.5-52.8 2.1 100.8 90 240 192 55.2-64.8
ZWS150BAF-3 3.3V 2.97-3.63 30 99 84 40 20 3.79-4.95
ZWS150BAF-5 5V 4.5-5.5 30 150 87 40 20 5.75-7
ZWS150BAF-12 12V 10.8-13.2 12.5 150 88 96 48 13.8-16.2
ZWS150BAF-15 15V 13.5-16.5 10 150 89 120 60 17.3-20.3
ZWS150BAF-24 24V 21.6-26.4 6.3 151.2 90 150 96 27.6-32.4
ZWS150BAF-48 48V 39.5-52.8 3.2 153.6 91 240 192 55.2-64.8
Mode l Se lec to r
5 V 10 A
100-240VAC
ZWS50BAF-5
OUTPUT50/60Hz
INPUT
MADE IN JAPAN
0.67 A
Outline Drawing ZWS50BAF
Note: ZWS50 & 75 available Q1 2011
Notes:
A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order
to conform the vibration specification.
B: Model name, input voltage range nominal output voltage and maximum output current are
shown here in accordance with the specifications.
C: Country of manufacture will be shown here.
D: is for safety ground connection.
E: To keep the distance more than 4mm between PCB edge and customer’s chassis.
ZWS-BAF Series 3
MADE IN JAPAN
ZWS75BAF-5INPUT
50/60HzOUTPUT
100-240VAC
5 V 15 A
1.0 A
Outline Drawing ZWS75BAF
Notes:
A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification.
B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications.
C: Country of manufacture will be shown here. D: is for safety ground connection.
E: To keep the distance more than 4mm between PCB edge and customer’s chassis.
Outline Drawing ZWS100BAF
Notes:
A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification.
B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications.
C: Country of manufacture will be shown here. D: is for safety ground connection.
E: To keep the distance more than 4mm between PCB edge and customer’s chassis.
F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-
P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.)
Matching Housing & Terminal --- not included with the product.
Outline Drawing ZWS150BAF
Notes:
A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification.
B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications.
C: Country of manufacture will be shown here. D: is for safety ground connection.
E: To keep the distance more than 4mm between PCB edge and customer’s chassis.
F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-
P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.)
Matching Housing & Terminal --- not included with the product.
ZWS-BAF Series
ZWS-BAF June11 v3
4
LOCAL DISTRIBUTION
TDK-LAMBDA EMEA www.emea.tdk-lambda.com
TDK-Lambda France SAS
Route de Grivery
ZAC des Delaches
CS 41077
91978 Courtaboeuf Cedex
France
Tel: +33 1 60 12 71 65
Fax: +33 1 60 12 71 66
www.fr.tdk-lambda.com
Italy Sales Office
Via dei Lavoratori 128/130
20092 Cinisello Balsamo (MI)
Italy
Tel: +39 02 61 29 38 63
Fax: +39 02 61 29 09 00
www.it.tdk-lambda.com
TDK-Lambda Germany GmbH
Karl-Bold-Strasse 40
77855 Achern
Germany
Tel: +49 7841 666 0
Fax: +49 7841 5000
www.de.tdk-lambda.com
Austria Sales Office
Aredstrasse 22
2544 Leobersdorf
Austria
Tel: +43 2256 655 84
Fax: +43 2256 645 12
www.de.tdk-lambda.com
TDK-Lambda UK Ltd.
Kingsley Avenue
Ilfracombe
Devon EX34 8ES
United Kingdom
Tel: +44 (0) 12 71 85 66 66
Fax: +44 (0) 12 71 86 48 94
www.uk.tdk-lambda.com
Nemic Lambda Ltd.
Kibbutz
Givat Hashlosha 48800
Israel
Tel: +9 723 902 4333
Fax: +9 723 902 4777
www.nemic.co.il
Russia
Technical Support:
St Petersburg
Tel: +7 (812) 6580463
Sales:
Moscow
Tel: +7 (499) 7557732
www.tdk-lambda.ru