zxdu68 w201 product overview 20100519 en
TRANSCRIPT
www.zte.com.cn
ZXDU68 W201 Power System
ZXDU68 W201 is a high frequency switch-mode outdoor DC power system designed by ZTE. The maximum configured capacity is 200A with four 50A-rectifier modules. The power status information system allows the remote operation center to reduce, prepare, and prioritize site visits. The system and the rectifiers are fully complying with international standards.
Application: ● Outdoor GSM/CDMA mobile station● Outdoor Microwave repeat station● Outdoor Satellite BTS station● Outdoor Other middle/small capacity situation
ZXDU68 W201 ZXD2400
Key Features Benefits● Power efficiency is up to
94%, and the hibernation power is less than 2W.
● Saves electricity and reduces OPEX.
● Wide operating temperature of rectifier modules range from -40 to 70℃
● Highly adaptable to adverse environment saves expenditure for air conditioners.
● Wide input voltage range from 80 to 300V AC
● Adaptable to various and unstable power grids.
● Up to 7U reserved spaces for transmission or other equipments
● Replaces shelter, saves CAPEX and shortens construction time.
● IP 55 ● Adaptable to outdoor environment
● RoHS conformed ● Environmental-friendly
www.zte.com.cn
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Website: www.zte.com.cn
Tel: +86-755-26770000
Fax: +86-755-26771999
S.N.: xczl2010007
System Technical Specifications: Rectifier Technical Specifications:Parameters DescriptionAC InputRated input voltage 380V AC three phase Input Voltage range(phase to neutral)
80 ~ 300V AC
Maximum input voltage
100A
Frequency 45 Hz – 66 HzPower factor ≥ 0.99 (with full load)THD <2.8%DC Output
Output voltage-48V DC nominal; operating range 42~ -58V DC
Output current 200A (full load at >176V AC) Battery input One battery air switchEfficiency ≥ 94% (rated input; full load) DC lightning discharge current
≤ 5 kA
Protection OCP, OVP, UVP, OTPSafety standard IEC60950-1Environment RequirementOperating temperature –20°C ~ 55°CStorage temperature –40°C ~ 70°C Relative humidity 10% ~ 90%RH Waterproof and dustproof performance
IP55
Dimensions and weightIntegrated cabinet 1 (for heat exchanger)
1850×600×600 (8U spare space)
120kg without rectifier
Integrated cabinet 2 (for fan)
1600×600×600 (5U spare space)
100kg without rectifier
Power supply cabinet 1 (for heat exchanger)
950×600×600 (4U spare space)
75kg
Power supply cabinet 2 (for fan)
950×600×600 (4U spare space)
55kg
Battery cabinet 900×600×600 45kg
Parameters Description AC input
Input mode Single-phase/three-line (L/N/PE)
Input voltage220V AC nominal; operating range: 80 ~ 300V AC
Input frequency 45 Hz - 66 Hz
Input current 16 (maximum)
Efficiency ≥ 94%
Input power factor ≥ 0.99
DC output
Output powerRated output power: 2400 W; Maximum output power: 3000 W
Output voltageRated output: -48V DC, adjustable range: -42 ~ -58V DC
Others
Operating temperature
–40°C ~ 70°C
Dimensions 134 mm × 87 mm × 290 mm (H x W x D)
Weight 3.8 kg
Applicable standards
Electrical safety IEC60950-1
EMC
ETSI EN300EN61000-6-1(immunity, light industry) EN61000-6-2(immunity, light industry)EN61000-6-3(emission, light industry) EN61000-6-4(immunity, light industry)
For continuous improvement and development, the specifications are subject to change without prior notice.