玄人魂 prokon series - vessel.co.jp · 玄人魂prokon series "kadogiwa" corner bit...
TRANSCRIPT
Bits series for those who have professional minds
玄人魂seriesP R O K O N
"KADOGIWA" Corner Bit for Bracing
Double-Ended "SAKISUBO" Bit
Testament to quality - VESSEL & Silver line. With indication of the size.
Edge has a powerful magnet.
Constricted part absorbs the impact of the electric impact driver.You can tighten without bend like the torsion bit.
485435485436
EDP No.
135×50×7160×50×7
Card size(mm)Content
+2× 65mm…5 pcs.+2×110mm…5 pcs.
Model No.
S5P2065FS5P2110F
S5P2065F
1010
InnerCtn.
485421485422
EDP No.
160×50×13135×35× 8
Card size(mm)Content
SQ No.3×100mm…1 pc.SQ No.3× 35mm…1 pc.
Model No.
1010
InnerCtn.
3
2
KDB-SQ3KDB-SQ3K
KDB-SQ3
Features: New solution for carpenters. The cushion effect at the constricted part absorbs the impact of the electric impact drivers to let screws smoothly drive in. Accordingly, the bit is more durable. Strongly magnetized.
Application: Joist fixing, stage construction, concrete panel and fixing the sash frame.
Features: Bobbing head type which is useful for installing the antiseismic reinforcement metal fittings which have been difficult to install until now. You can use the electric impact driver for screws at the corner difficult to drive in, because the top of the bit inclines at 6 degrees.Strong neodyum magnet is integrated so as to fix the fittings in a right position.
Application: Holddown, bracing, and fixing for various antiseismic metal fittings
REPLACEMENT CORNER BIT
13
100
35
13
110
65
KDB-SQ3K
Bit can be replaced. While pulling the sleeve and lightly moving the bit, draw it out.
S5P2110F
Durability improved by 20%(compared to our standard product)
Sleeve
Double-Ended COMBI Bit (PZ)
Double-Ended COMBI Bit (SQ)
"Plus-Minus" Bit for Terminal Screws
485401485402485406485407485408
EDP No.
160×35× 8160×35× 8160×35× 8160×35× 8190×35×17
Card size(mm)Content
PZ2/ PZ3× 65mm………2 pcs.PZ2/ PZ3×110mm………2 pcs.+2/ SQ No.3× 65mm…2 pcs.+2/ SQ No.3×110mm…2 pcs.+2/ SQ No.3×150mm…1 pc.
Model No.
1010101010
InnerCtn.
PZ142365PZ142311PQ142365PQ142311PQ142315S
PZ142311
485411485412485413
EDP No.
160×35×8160×35×8210×35×8
Card size(mm)ContentModel No.
101010
InnerCtn.
PS161110PS162110PS162150
PS1×φ4 ×φ4.5×110mm…1 pc.PS2×φ5.5×φ6 ×110mm…1 pc.PS2×φ5.5×φ6 ×150mm…1 pc.
Features: Special bit for popular cross and slotted screw.You can use the electric driver and impact driver for the usual operation for which hand drivers are mainly used.With the tube to prevent the short circuit accident. Strongly magnetized.
Application: Installation of the wire support fittings and the terminal screws for control panels, and water piping work and air conditioning work.
PS161110 PS162110
PS162150
PQ142365 PQ142311
PQ142315S
PZ142365
13
13
100
100
150
※POZIDRIV systems are patented and registered as the trademark of EIS corp. in U.K.
3 2
1313.2
110
150
65
150
Features: Two popular sizes for usual working have been incorporated in one bit. Strongly magnetized.
Application: Positive (+) & Square (SQ) compounds +2, which can widelybe used for architectural woodworking, with SQ3 for the antiseismic metal fitting. Posidriv bit is also popular for furniture assembling. In Japan, VESSEL is a qualified licensee.
Q142315
1
13
110
265
13
65
3
2
2
● Be sure to wear glasses when using. ● Do not use this product for other purposes than intended. ● Use a product suitable for a screw. ● Avoid more force than necessary. ● Never run dry power tools with this product. ● Attach or replace bits after the power is certainly disconnected.
Features: With impact wrench, you can easily burr the full thread studs for which the grinder was used. The issue "Nut cannot be inserted into ..." on site has been solved! This is essential for craftspeople who handle the full thread studs. Excellent durability
Application: Essential product for hanging bolts and installing air conditioning equipment. Suitable for the terminal treatment of anchor bolts.
Φ8~12mmFor full thread (iron) M8, 3/8, M10, M12
485431
EDP No.
160×35×20
Card size(mm)ContentModel No.
5
Inner Ctn.
A20ZB55 BURRING BIT…1 pc.
13
φ17 4
55
Features: Convenient ball grip which can be used with various bits (A/F6.35mm) for electric screwdrivers.
Application: Wide variety bits can be used with; PLUS-MINUS bits, Burring bits (both shown in this catalogue), and so on. Also good for re-tightening by hand.
125344
EDP No.
145×50×43
Card size(mm)ContentModel No.
10
Inner Ctn.
220W
220W
BALL-GRIP BIT EXCHANGEABLE GRIP…1 pc.
A20ZB55
41
100
6.35
Features: Convenient ball grip which can be used with various bits (A/F6 35mm) for
41
100
6.35
15050121.01
CAUTION
"BARITORI" Full Thread Burring Bit
Bit Interchangeable Ball-Grip