004-pa-16 technosheet icp2 - verder liquids · 2016-06-17 · connections bsp thread, industrial...
TRANSCRIPT
Packo ICP2 industrial pump series
The Packo pumps of the ICP2 series are mainly used as a process pump for
pumping clean as well as slightly contaminated liquids. These robust pumps have
stainless steel 316L pump casings constructed in thick cold rolled plate and have
open investment cast impellers in stainless steel 316L or duplex materials. Thanks
to its solid construction and electro polished design these pumps are the reliable
component for your production process.
Application areas
The Packo pumps of the series ICP2 are used in a wide range of industries and
applications. You can � nd them in just about all industries such as vegetable
industry, breweries, water treatment and textile industry as well as in e.g. biogas,
biodiesel and bioethanol applications.
Typical liquids: blanching water, mash, wort, process and contaminated water,
biodiesel, bioethanol, alcohols, CIP, biogas, etc.
Your benefi ts
High pump ef� ciency resulting in lower energy consumption
Low NPSH values: less risk on cavitation
Electropolished
Easy construction and easy maintenance: Less downtime
Standard components
Easy to install
2 mechanical seal diameters for the entire range
Robust construction
Max. fl ow rate 110 m3/h
Max. differential head 110 m
Max. liquid viscosity 500 cP
Max. temperature 140°C
Impeller type Open
Max. free passage 22 mm
Max. motor power 45 kW
Max. speed 3000 / 3600 rpm
Available frequency 50 / 60 Hz
Connections BSP thread, industrial fl anges acc. to EN 1092-1/01 and ANSI (optional: hygienic fi ttings)
Materials wetted parts Stainless steel 316L or similar
Available materials o-ring EPDM, FKM, FEP-FKM, FFKM, Silicone
Mechanical seal confi guration Single, quench, double
Surface fi nish Industrial fi nish: welds are not hand polished. Final surface treatment: electropolished
Certifi cates & Legislation 1935/2004 EC, FDA, ATEX, EU N° 547/2012
Technical specifi cations
Find your local supplier at www.verder-liquids.comFor construction, installation and fl oor mounting drawings
please contact your local authorised Verder® distributor.
ICP
2_In
dus
tria
l_p
ump
_ser
ies_
Tech
nosh
eet_
rev0
1_20
16_(
eu)
Packo ICP2 industrial pump series
Performance curves at 2900 rpm
Electropolished Mechanical polishing 240 grit Glass bead blasted
Specifi cations
Solid design thanks to thick pressed casings and investment cast impellers (1)
Standardized mechanical seals to EN 12756
FDA approved bellow seals; balanced O-ring seals (2)
2 mechanical seal diameters (33 mm up to 22 kW, 43 mm for larger motor powers)
Use of standardized components
Electropolished design (for wetted & non-wetted parts);
easy to clean and increased corrosion resistance
1
1
2
1
120
100
80
60
40
20
00 20 40 60 80 100 120
Flow (m3/h)
Hea
d (m
)
50 - 250
50 - 160
40 - 250
50 - 250
50 - 160
40 - 20040 - 200
50 - 20040 - 185
32 - 185
40 - 16032 - 160
40 - 160
40 - 12540 - 12532 - 125
32 - 185
32 - 12532 - 12532 - 12532 - 12540 - 125