004 tanks
TRANSCRIPT
63New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
AVERAGE PROPERTIES OF PROPANE
Formula C3H8
Boiling Point, °F -44
Specific Gravity of Gas (Air = 1.00) 1.50
Specific Gravity of Liquid (Water = 1.00) 0.51
Lbs. per Gallon of Liquid at 60°F 4.24
BTU per Gallon of Gas at 60°F 91547
BTU per Lb. of Gas 21591
BTU per Cu. Ft. of Gas at 60° 2516
Cu. Ft. of Vapor at 60°F/Gal. of Liquid at 60°F 36.39
Cu. Ft. of Vapor at 60°F/Lb. of Liquid at 60°F 8.547
Latent Heat of Vaporzationat Boiling Point BTU/Gal. 785.0
Combustion Data: Cu. Ft.Air Requiredto Burn 1 Cu. Ft.Gas 23.86
Ignition Temperature in Air, °F 920to 1120
Maximum Flame Temperature in Air, °F 3595
Limits of Imflammability,Percentage of Gas in Air Mixture:at Lower Limit—% 2.15at Upper Limit—% 9.6
Octane Number (ISO - Octane = 100) Over 100
VAPOR PRESSURE OF PROPANE
TEMP. PRES. TEMP. PRES. TEMP. PRES. TEMP. PRES.110°F 220 psig 60°F 102 psig 20°F 47 psig -20°F 13.5 psig
100°F 196 psig 50°F 86 psig 10°F 37 psig -30°F 8 psig
90°F 165 psig 40°F 72 psig 0°F 28 psig -40°F 3.6 psig
80°F 140 psig 30°F 58 psig -10°F 23.3 psig -44°F 0 psig
70°F 127 psig
BTU COMPARISON
Common Fuels Per Gal. Per Lb.
Propane 91,547 21,591
Butane 102,032 21,221
Gasoline 110,250 20,930
Fuel Oil 134,425 16,960
TEMPERATURE CONVERSION
Degrees F Degrees C Degrees F Degrees C
-50 -46 60 15.6
-40 -40 70 21.1
-30 -34 80 26.7
-20 -29 90 32.2
-10 -23 100 37.8
0 -17.8 110 43
+10 -12.2 120 49
20 -6.7 130 54
30 -1.1 140 60
32 0 150 66
40 +4.4 160 71
50 10.0 170 77
FORMULA: Degrees C = (°F - 32) x 5/9Degrees F = 9/5 x °C + 32
CONVERTING VOLUMES OF GAS(CFH TO CFH OR CFM TO CFM)
Multiply Flow of: By To Obtain Flow of:
0.707 Butane
Air 1.290 Natural Gas
0.808 Propane
1.414 Air
Butane 1.826 Natual Gas
1.140 Propane
0.775 Air
Natural Gas 0.547 Butane
0.625 Propane
1.237 Air
Propane 0.874 Butane
1.598 Natural Gas
Multiply By To Obtain
Volume
Cubic centimeter 0.06103 cubic inchesCubic feet 0.0275 gallons (US)Cubic feet 28.316 litersCubic feet 1728 cubic inchesGallons (US) 36.39 cubic feetGallons (US) 3.785 litersGallons (US) 231 cubic inchesLiters 1.057 quartsLiters 2.113 pints
Miscellaneous
BTU 0.252 caloriesDecitherm 10,000 BTUKilogram 2.205 poundsKilowatt Hour 3412 BTUOunces 28.35 gramsPounds 0.4536 kilogramsPounds 453.5924 gramsPounds 21,591 LPG BTUTherm 100,000 BTUAPI Bbls 42 gallons (US)Gallons of Propane 26.9 KWHHP 746 KWHHP (Steam) 42,418 BTU
Pressure
Grams per sq. cm 0.0142 pounds per sq. in.Inches of mercury 0.4912 pounds per sq. in.
Multiply By To Obtain
Pressure continued
Inches of mercury 1.133 feet of waterInches of water 0.0361 pounds per sq. in.Inches of water 0.0735 inches of mercuryInches of water 0.5781 ounces per sq. in.Inches of wter 5.204 pounds per sq. ft.KPA 100 BARKilograms per sq. cm 14.22 pounds per sq. in.Kilograms per sq.m 0.2048 pounds per sq. ft.Pounds per sq. in. 0.07031 kg per sq. cmPounds per sq. in. 0.06804 atmospheresPounds per sq. in. 6.89 KPAPounds per sq. in. 2.036 inches of mercuryPounds per sq. in. 2.307 feet of waterPounds per sq. in. 0.6897 BARPounds per sq. in. 27.67 inches of water
Length
Centimeters 0.3937 inchesFeet 0.3048 centimetersFeet 304.8 millimetersKilometer 0.6214 milesMeters 1.094 yardsMeters 3.281 feetMeters 39.37 inchesMiles (nautical) 1,853.0 metersMiles (statute 1,609.0 metersYards 0.9144 metersYards 91.44 centimeters
APPROXIMATE VAPORZATION CAPACITIESOF TRINITY PROPANE TANKS
BTU PER HOURWITH 40% LIQUIDIN TANK DOMESTIC SYSTEMS
Tank Size Prevailing Air TemperatureWater Capacity 20°F 60°F
120 290,304 516,096
250 406,080 721,920
325 514,100 937,900
500 634,032 1,127,168
1,000 1,088,472 1,978,051
2,000 2,128,897 4,257,795
6,000 4,262,400 6,393,600
8,000 5,060,000 7,590,000
10,000 6,230,400 9,345,600
12,000 7,400,000 11,100,000
15,000 8,080,000 12,120,000
18,000 8,500,000 12,750,000
20,000 9,500,000 14,250,000
30,000 11,800,000 17,700,000
CONVERSION UNITS
64 Order on-line: www.tarantin.com
TANKSTANKS
MANCHESTER PORTABLE DOT VERTICAL STEEL CYLINDERS
COMPOSITE CYLINDERS
DESCRIPTION PART NUMBER OL H D TW WC B
5LB Vertical ACME/Type 1 with OPD 10054 12 8.62 8 9.5 13 6.5
10LB Vertical ACME/Type 1 with OPD 10228.4 17.43 13.75 8.87 14 26.1 7.25
11LB Vertical ACME/Type 1 with OPD 10393.1 12.38 8.37 12.16 13 25.4 7.93
5, 10, and 11 Pound Portable Cylinders
10054 10228.4 10393.1
B
D
BD
B
D
H
OLH
OLH
OL
Manufactured by the Lite Cylinder CompanyApproved by the DOT special permit #13957
Translucent!Know HowMuch Gas is Left in Cylinder
Features:• 50% Lighter than Steel• Corrosive Free• Stackable• Constant Tare Weight• Pre-purged
Specifications:Size 20lbDiameter 12.4O.L. 18"Net Propane 19lbT.W. 12.4lbValve ACME/OPDStandard UL Listed Type 1Part Number LC-20
Specifications:Size 10lbDiameter 9.7O.L. 17.3"Net Propane 10lbT.W. 11.5lbValve ACME/OPDStandard UL Listed Type 1Part Number LC-10
20lb Cylinder
10lb Cylinder
Ideal for Marine, Camping and Hunting
65New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
MANCHESTER PORTABLE DOT VERTICAL STEEL CYLINDERS
SUREFLAME CYLINDER
Vertical
DESCRIPTION PART NUMBER OL H D B TW WC
20LB ACME/Type 1 with OPD 10504 17.56 13.62 12.16 8 18 47.6
20LB ACME/Type 1, Gauge with OPD 10834TC.1 17.56 13.62 12.16 8 19 47.6
20LB Telephone, ACME/Type 1 with OPD 10781.2 18.31 13.62 12.16 7.93 20 47.6
DESCRIPTION PART NUMBER OL H D B TW WC
30LB ACME/Type 1 with OPD 1160.8 23.43 19.56 12.16 7.93 25.5 71.4
30LB ACME/Type 1, Gauge with OPD 1166.2 23.43 19.56 12.16 7.93 26.6 71.4
40LB ACME/Type 1 with OPD 1220TC.4 29.43 25.56 12.16 7.93 30.5 95.2
40LB ACME/Type 1, Gauge with OPD 1222TC.2 29.43 25.56 12.16 7.93 30.5 95.2
40LB Telephone, ACME/Type 1 with OPD 12781.2 31.06 25.56 12.16 12.16 34 95.2
40LB ACME/Type 1 with OPD (Large Foot Ring) 1203TC.3 29.43 25.56 12.16 12 30.5 95.2
20 Pound Gas Grill and RV Cylinders
30 and 40 Pound Cylinders
BD
HOL
10781.1210504
Cylinders aremanufactured tomeet or exceed DOT Specification 4BA240 or 4BW240.
The Newest and Most Effective Gauge Available!
Features:
• Easy to Read
• Easy to Use
10577
Don’t Run Out of Gas Again
You’ll find cylinder accessories on page 67.
66 Order on-line: www.tarantin.com
TANKSTANKS
MANCHESTER PORTABLE DOT VERTICAL STEEL CYLINDERS
Standard POL ValveCGA510 Connection
FootringRust resistant mastic coating appliedby dipping footring.
100SLMMLiquidWithdrawal Multivalve
CGA555 Connectionwith 1 3/4" ACME Fill
100SLMLiquidWithdrawal ValveCGA555 Connection
1436.4Vapor MultivalvePOL Valve with1 3/4" ACME Fill
DESCRIPTION PART NUMBER C OL H D B TW WC
50LB Outage, Collar Type with POL 14861 .50 28.5 23.7 14.5 14 46 119
60LB Outage, Collar Type with POL 1426 1.06 43.12 37.37 12.16 12.16 46 143
100LB Outage, Collar Type with POL 1428 .50 46.31 41 15.06 14 70 238
100LB Multivalve,Collar Type with POLWhite 1436.4 .50 46.31 41 15.06 14 71 238
100LB Cyl Collar w/ liquid valve 100SLM .50 46.31 41 15.06 14 71 238
100LB Cyl Collar w/ liquid multivalve 100SLMM .50 46.31 41 15.06 14 238 14
50, 60 and 100 Pound Cylinders
Powder Coated
H OL
BC
D
All cylinders on this page are manufactured to meet or exceed DOT Specification 4BW240.
67New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
TANK AND CYLINDER ACCESSORIES
PART NUMBER DESCRIPTION
1433 Screw cap, 3 1/2" thread
1406.1 Screw on collar (construction) fits over multivalve, 3 1/2"
1406.2 Screw on collar (construction) fits over multivalve, 3 1/8"
PART NUMBER DESCRIPTION
510 POL-LOCK
510-K POL-LOCK KEY
LOCK-FILL LOCK FOR POL FILLSTATION HOSE END
PARTNUMBER DESCRIPTION
500BRK Break-away Lock; Keyed Alike
Screw On Collar1406.11406.2
Screw On Cap1433
LOCKING CAPS BREAK-AWAY LOCKS
LOCKS
PART INSIDE BOTTOM VALVENUMBER DIAMETER OPENING HEIGHT TYPE
LC-1 2 1/4" 1 1/2" 1-1/8" FILLER
LC-S4 2 1/2" 1 3/8" 1" 100LB
510
For use on cylinders during transportation. Also protects valve onconstruction sites as per DOT and OSHA requirements.
The easy to install 510 Saf-T-Lok securely locks POL service valves toprevent unauthorized hookups, reduce pilferage, and secures tanksafter “out of gas” calls. Provides an effective credit control.
LOCK-FILL
Hidden breakaway feature allows firedepartment or emergency responsepersonnel access to valves, plant gates, etc.Lock shackle breaks away when struckwith a hammer or chisel.
Encloses ACME thread or handwheel on valve to preventtampering.
Replacement OPD valves are on page 19 of the Valves Section.
68 Order on-line: www.tarantin.com
TANKSTANKS
SPECIAL APPLICATION CYLINDERS
MANCHESTER DOT HORIZONTAL CYLINDERS
20 and 30 Pound Steel Cylinders
DESCRIPTION PART NUMBER OL H D TW WC B
20LB ACME/Type 1,Gauge with OPD 10487TC 17.37 13.62 12.16 19.5 47.6 7.93
30LB ACME/Type 1with OPD and Gauge 1175TC 23.43 19.56 12.16 27.7 71.4 7.93
Vertical Liquid Truck Cylinders
VAPOR OR LIQUID14 LB
100 LB
ORDER NUMBER 5305L 5306V 5549
14LB LP 14LB LP 100LB LPWITH FILL (VAPOR WITH FILL**
(LIQUID SERVICE) SERVICE)
Water Capacity (lbs.) 32.4 32.4 238
OAL 20.75 20.75 48.87
Cyl. Diameter 9.0 9.0 14.5
Guard Diameter 8.0 8.0 10.25
Foot Ring Diameter 8.0 8.0 14.0
Tare Weight, lbs.* 21.8 21.8 77.0
* Tare weight may vary slightly on individual cylinder.
** Special order
Plumber Pot Steel Cylinders with OPD ValveWith large foot ring for improved stability! Meets and exceeds4BA240 specifications.
All plumber tanks come with Sherwood 3359 AS valve with 10%outage. Plumber pot furnaces, shield and accessories available.
OVERALL FOOT RING WATER TAREMODEL NO. SIZE HEIGHT DIAMETER DIAMETER CAP. WEIGHT
10511-C 20LB 18 3/16 12.150 12" 47.6 20
All cylinders on this page aremanufactured tomeet or exceed DOT Specification 4BA240 or 4BW240.
69New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
PORTABLE DOT ALUMINUM CYLINDERS
6 LB 10 LB 20 LB 30 LB 40 LB
DESCRIPTION PART NUMBER OL H D TW WC
6LB Vertical ACME/Type 1 6ALVQOW 22.06 15.56 6.26 8 15
10LB Vertical ACME/Type 1 9058TC.2 16.25 10.75 10.28 10.1 23.8
20LB Vertical ACME/Type 1 9060TC.1 20.06 15.1 12.125 14.1 47.6
30LB Vertical ACME/Type 1 30ALVQOW 26.65 21.15 12.125 18 71.5
40LB Vertical ACME/Type 1 40ALVQOW 32.06 26.56 12.125 20.9 95.2
DESCRIPTION PART NUMBER OL OH WC
10LB Horizontal with OPD 9059TC.l 16.5 11 23.8
20LB Horizontal with OPD 9061TC.1 20.56 13 47.6
30LB Horizontal with OPD 30ALHQOW 26.5 13 71.5
40LB Horizontal with OPD 40ALHQOW 31.25 12.5 95.2
10, 20, 30 and 40 Pound Horizontal Aluminum Cylinders
6, 10, 20, 30 and 40 Pound Vertical Aluminum Cylinders
All cylinders on this page are manufactured to meet or exceed DOT Specification 4E240.
70 Order on-line: www.tarantin.com
TANKSTANKS
All cylinders on this pagearemanufactured tomeet
or exceedDOT Specification4BW260 with the exception
of 6ALW.
INDUSTRIAL WELDING CYLINDERS
Caps sold separately.
* Overall length on screw cap may vary depending on design or vendor.
6 LB
Aluminum
6 POUND CYLINDERSPART NUMBER WC DIA L OAL BR WP TW
6ALW 15.0 5.5 19.0 22.5 6.5 260 8.0
60 POUND CYLINDERS*PART NUMBER WC DIA H OL B TW
1477 143 12.17 37.38 43.12 12 5814734 143 12.17 37.39 44.75 12 58
25.5 POUND CYLINDERS*PART NUMBER WC DIA H OL B TW
14738 60.7 9 29 33.56 8 60.714739.3 60.7 9 29 35.25 8 60.7
100 POUND CYLINDERS*PART NUMBER WC DIA H OL B TW
14735 238 14.5 43.69 49 14 7214736 238 14.5 43.69 50.69 14 72
HNo. 14738Collar Style
No. 14739.3Cap Style
OLOL
BDIA
H
No. 14733Collar Style
No. 14734Cap Style
OLOAL
BDIA
HNo. 14735Collar Style
No. 14736Cap Style
OL
OAL
BDIA
Caps sold separately.
* Overall length on screw cap may vary depending on design or vendor.
DOT Specification 4E260
Caps sold separately.
* Overall length on screw cap may vary depending on design or vendor.
22 1/2"
For use with low pressure welding and cutting gases: Mapp, Propylene, Flamexand Apache. ALL VALVES POL (CGA 510) W/405PSI RELIEF
71New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
MANCHESTER STEEL FORKLIFT CYLINDERS
43.5 LB33.5 LB20 LB
5 Hole HeadPlugged FillCode 13
4 Hole HeadNo Gauge
5 Hole HeadFully FittedCode 12
PART OVER ALL CYL GUARD FOOTRING TAREWT ACME WATER ACME 10%NUMBER LP CAP LENGTH DIAM. DIAM. DIAM. (LBS) GAUGE CONN CAP (LBS) FAST FILL OUTAGE
5455 Buffer/Vapor 20LB 19.13 12.19 10.25 10.25 27 Yes Yes 47.6 No Yes
5456 Buffer/Vapor 20LB 19.13 12.19 10.25 10.25 27 Yes Yes 47.6 Yes Yes
5550 20LB 19.13 12.19 10.25 10.25 27 Yes Yes 47.6 No Yes
5560 20LB 19.13 12.19 10.25 10.25 27 Yes Yes 47.6 Yes Yes
5570 33.5LB 27.25 12.19 10.25 10.25 36 Yes Yes 80 No Yes
5572.12 33.5LB 27.25 12.19 10.25 10.25 36 No Yes 80 Yes Yes
5572.13* 33.5LB 27.25 12.19 10.25 10.25 36 No Yes 80 No Yes
5580 33.5LB 27.25 12.19 10.25 10.25 36 Yes Yes 80 Yes Yes
5590 43.5LB 33.25 12.19 10.25 10.25 43 Yes Yes 104 No Yes
5595 43.5LB 33.25 12.19 10.25 10.25 43 Yes Yes 104 Yes Yes
NOTE: We are the largest warehouse for forklift cylinders. We can stamp your name on the collar.
* Has plugged fill opening.
555055705590
556055805595
5572.13*5572.12
All cylinders on this page are manufactured to meet or exceed DOT Specification 4BA240.
Remember! All Manchesterforklift tanks have a lifetimeguarantee on the liquid tube.
72 Order on-line: www.tarantin.com
TANKSTANKS
MANCHESTER ALUMINUM FORKLIFT CYLINDERS
20 LB 33.5 LB 43.5 LB
930093109164
9290
PART OVER ALL CYL GUARD FOOT RING TAREWT ACME WATER ACME 10%NUMBER LP CAP LENGTH DIAM. DIAM. DIAM. (LBS) GAUGE CONN CAP (LBS) FAST FILL OUTAGE
9285 Buffer/Vapor** 20LB 20.38 12.28 10.5 9.5 17 Yes Yes 47.6 No Yes
9287 Buffer/Vapor** 20LB 20.38 12.28 10.5 9.5 17 Yes Yes 47.6 Yes Yes
9305 20LB 20.38 12.28 10.5 9.5 17 Yes Yes 47.6 Yes Yes
9310 33.5LB 28.56 12.28 10.5 9.5 23.5 Yes Yes 80 No Yes
9315 33.5LB 28.56 12.28 10.5 9.5 23.5 Yes Yes 80 Yes Yes
9290 33.5LB 28.56 12.28 10.5 9.5 23.5 No Yes 80 No Yes
9317 33.5LB 28.56 12.28 10.5 9.5 23.5 No Yes 80 Yes Yes
9161 43.5LB 33.94 12.28 10.5 9.5 25 Yes Yes 105 Yes Yes
9164 43.5LB 33.94 12.28 10.5 9.5 25 Yes Yes 105 No Yes
NOTE: We are the largest warehouse for forklift cylinders. We can stamp your name on the collar.
* Has a plugged fill opening. ** Buffer tanks are for use in vertical position only.
5 Hole HeadCode 12
5 Hole HeadPlugged FillCode 13
4 Hole HeadNo Gauge
3 Hole HeadNo Gauge
43ALFL12W916193059315
93179317.12*
All cylinders on this page are manufactured to meet or exceed DOT Specification 4E240.
73New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
FORKLIFT CYLINDER BRACKETSRELIEF VALVES
SCREWS AND GASKETS FLOAT GAUGES FOR FORKLIFT CYLINDERS
7545-12
8545AK
7545-40 8545-41
PART NUMBER CYLINDER SIZE DESCRIPTIONTB-2 33 1/2LB & 43 1/2LB HorizontalTB-3 20LB VerticalTB-4 20LB HorizontalTB5 14LB VerticalTB-6 14LB Horizontal
TB2-60 Any Toggle Latch Only
PART NUMBER DIAL SIZE TYPE OF TANK
5-01791 Junior 33LB Universal
PART NUMBER DESCRIPTION8545AK 3/4" NPT RELIEF 375PSI7545-14 45° PIPE AWAY ADAPTER7545-12 90° PIPE AWAY ADAPTER7545-40 RAIN CAPW/STRAP FOR 8545AK8545-41 RAINCAP-PUSH-ON9103-54 RAINCAP FOR 7545-14
PART NUMBER DESCRIPTION
2733U-CV JR Universal 33LBMotor Fuel
2743U-CV JR Universal 43LBMotor Fuel
PART NUMBER DESCRIPTION40-414S Junior Head Screw40-415S Senior Head Screw40-416 Dial Screw15-004 Senior Gauge Gasket15-007 Junior Gauge Gasket
REPLACEMENT DIALS FORROCHESTER FLOAT GAUGES
TAYLOR VISIBLEREPLACEMENT DIALS
7545-14A
CYLINDER P A R T N U M B E RSIZE JR 1 1/4" MNPT 3/4" MNPT
20 LB JU086B TU086B HU086B33 1/2 LB JU160B TU160B HU160B43 1/2 LB JU212A TU212A
74 Order on-line: www.tarantin.com
TANKSTANKS
REGO SERVICE VALVES FOR DOT FORKLIFT CYLINDERS
AccessoriesPART NUMBER DESCRIPTION
7141M-3R RegO Outer Flat Washer
MSW-4 Outer Washer Flat
2114A Inner O-ring
FIXED LIQUID LEVEL GAUGES REGO DOUBLE BACKCHECK FILLER VALVE
REGO FORKLIFT CONNECTORS
3165CF05.6
PARTNUMBER DESCRIPTION
3165CF05.6 12" Tube Supplied3165C Fixed Level Gauge
7647SCTwith everseal on threads
1 3/4" M. ACME x 3/4" MPT high capacity filling usedon DOT and ASME containers for fast filling.
9101P5
Designed specifically for vapor or liquid withdrawal service on DOT forklift containers. Valves with 1.5GPM closing flow are for use in small and medium size lift truck applications, while those with 2.6 GPMclosing flow are for large lift trucks and gantry crane type vehicles.
APPROXIMATE FILLING RATEC L O S I N G F L O W ( L P - G A S ) LIQUID FLOW, GPM
V A P O R PRESSURE DROP ACROSS VALVELIQUID
PART CONTAINER SERVICE WITHDRAWAL 25 PSIG 100 PSIG LIQUID 10 25 50 100NUMBER CONNECTION CONNECTION CONNECTION INLET (SCFH) INLET (SCFH) (GPM) PSIG PSIG PSIG PSIG9101P5 3⁄4" M.NGT 3⁄8" M.NPT None 430 900 1.5 5.0 7.6 10.7 14.99101P5H 3⁄4" M.NGT 3⁄8" M.NPT None 550 1050 2.6 5.0 7.6 10.7 14.99101P6 3⁄4" M.NGT 3⁄8" M.NPT 1⁄4" NPT 430 900 1.5 4.5 7.2 10.3 14.89101P6H 3⁄4" M.NGT 3⁄8" M.NPT 1⁄4" NPT 550 1050 2.6 4.5 7.2 10.3 14.8
NOTE:These valves incorporate an excess flow valve.
* Recommended to minimize foreign material entering valves which could result in leakage.
7141M
7141F
PART PROTECTIVE CAP*NUMBER APPLICATION INLET OUTLET RUBBER BRASS
7141M Service Valve 3⁄8" F.NPT 1 1⁄4" M.ACME 7141M-40 7141FP
7141F Fuel Line 1 1⁄4" F.ACME 1⁄4" F.NPT
These brass connectors are especially designed to join the carburetorfuel line to the service valve on lift truck cylinders.
MSW-4
75New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
MANCHESTER DOT CYLINDERS
DOT 200LB
Manchester ASME and DOT 200 and 420 offer the best finish and features in the industry.
DOT 420LB
• Large 16" Diameter Collar• Large Vented Collar & Foot Ring• Full Load Lift-Lugs• Armor-Clad III Powder Coat Paint• All Threads Sealed with Blue Everseal
• Heavy-Duty Hinged Lid• 4 Hole Head Design• HPPE Plastic Lids – No Rust or Dents• Colors Available• Vacuum Pre-purged
COLORPART NO. 14205.29 GRAYPART NO. 14205.30 WHITEPART NO. UPON REQUEST SPECIAL COLORWater Capacity, LBS 476Overall Length(OL) 42.12Cylinder Diameter 24Guard Diameter 14Foot Ring Diameter 20Tare Weight, Lbs. 147
COLORPART NO. 1499.101 GRAYPART NO. 1499.102 WHITEPART NO. UPON REQUEST SPECIAL COLORWater Capacity, LBS 1000Overall Length(OL) 53.25Cylinder Diameter 30Guard Diameter 16Foot Ring Diameter 23.12Tare Weight, Lbs. 270
420 D.O.T. and A.S.M.E. Basic ComparisonsRETEST MATERIAL TRANSPORTATION RELIEF VALVE
DIAMETER O.L. WT. PERIOD THICKNESS NAMEPLATE FINISH T/L WITH PROPANE PRESSURE
D.O.T. 30" 53.25" 270 lbs. 12/5 Yrs. Stamped Powder Coated 99 Yes-80% 375420 in Collar Mastic Dip
A.S.M.E. 30" 53.25" 309 lbs. None 13% Heavier Stainless Powder Coated 99 Yes-80% 250420 More Corrosion Steel Riveted Mastic Dip
Protection in Collar
All cylinders on this page are manufactured to meet or exceed DOT Specification 4BW240.
Did you knowwe havemany remote pick-up yardswhere you can get a tank in a hurry.Call for the locations nearest you.
76 Order on-line: www.tarantin.com
TANKSTANKS
MANCHESTER ASME TANKS
ASME 200LB ASME 420LB
• Large 16" Dia. Collar• Large Vented Collar
and Foot Ring• Full Load Lift-Lugs• Armor-Clad III Powder
Coat Paint• All Threads Sealed
with Blue Everseal• Heavy-Duty Hinged Lid• Stainless Steel Nameplate• Optional Liquid Withdrawal• Plastic Lids• Colors Available• Vacuum Pre-purged
COLORPART NO. 6765.4 GRAYPART NO. 6765.5 WHITEPART NO. UPON REQUEST SPECIAL COLORWater Capacity, GALS 57Overall Length(OL) 42.4Cylinder Diameter 24Guard Diameter 14Foot Ring Diameter 18Tare Weight, Lbs. 172
COLORPART NO. 6762.7 GRAYPART NO. 6762.8 WHITEPART NO. UPON REQUEST SPECIAL COLORWater Capacity, GALS 120Overall Length(OL) 53.3Cylinder Diameter 30Guard Diameter 16Foot Ring Diameter 24Tare Weight, Lbs. 326
REPAIR PARTS FOR 200 POUND CYLINDERSCYLINDER TYPE DESCRIPTION PART NUMBER
DOT Multivalve 3/4" for VaporWithdrawal 8555RT10.6
DOT Multivalve 3/4" for VaporWithdrawal 8555RT11.6
DOT/ASME Service Valve 3/4" 9101RT11.1
ASME Relive Valve 1", 250 PSI 8544G
DOT Relief Valve 1", 375 PSI 8544KT
DOT/ASME Fill Valve 3/4" 7647SCT
DOT/ASME Float Gauge 1" MNPT HA180A
DOT/ASME JR Gauge 24" Dial JA176B
REPAIR PARTS FOR 420 POUND CYLINDERSCYLINDER TYPE DESCRIPTION PART NUMBER
DOT Multivalve 3/4" 6533R11.7
ASME Multivalve 3/4" 6532RT12.0
DOT Multivalve 1" 6543RT11.7 or 12.0
ASME Multivalve 1" 6542RT12.0
DOT/ASME Service Valve 9101RT11.1 or 11.7
DOT/ASME Fill Valve 3/4" 7647SCT
DOT/ASME Fill Valve 1 1/4" 7579
DOT/ASME Float Gauge 1" MNPT HA254J
DOT/ASME JR Gauge JA250J
All cylinders on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specifications.
77New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
MANCHESTER ASME TANKS
100lb ASME Manchester MiniThe Perfect Patio Solution• Low center of gravity means more stability• Wide 360° welded collar for safety and ease of installation• Multivalve and gauge for onsite fill• Vacuum purged• HDPE lids
Part Number: 68143
300lb ASME Manchester MiniWhen a 200lb is too small and a 420lb is too big• State-of-the-art powder coated finish “Armor-Clad III”• Lifting lugs for easy handling• Vacuum purged• HDPE lids
Part Number: 68212
SPECIFICATIONS:
Overall Length(OL) 36.69"
Height 29.75"
Diameter 18"
WC 238#
B 15.5"
SPECIFICATIONS:
Overall Length(OL) 40.9"
Height 34"
Diameter 30"
WC 2911.7#
B 23.1"
78 Order on-line: www.tarantin.com
TANKSTANKS
Floor Mount Tank for Narrow Body Pickup Beds and Utility Boxes Motorfuel Tanks for Under Pickup Tool Boxes
Trunk Mount Compact & Mid-SizedFleet Vehicles
Additional sizes available, request catalog.* Special order.
Standard Type #1-45° Motorfuel Tankfor Trucks
Underbody,Manifold Motorfuel Tankfor Vans (rear mount)
MODEL NUMBER SIZE DESCRIPTION VALVES W.C. LP CAP T.W.200347 12 + 12 X 60 UNDER TOOL BOX PICK-UP UPPER 45 54.5 43.6 20924457 20X48 NARROW BED TRUCK PICK-UP TOP 58.6 46.9 16426087 20X60 STANDARD BED MOUNT PICK-UP UPPER 45 74.4 59.6 19020607* 14X48 WITH UNIVERSAL BRACKETS LOWER 45 29.2 23.3 10520727 18X80 SCHOOL BUS SLICK UPPER 45 81.3 65.1 22123117 20X42 TRUCK SLICK UPPER 45 50.7 40.6 14623127 20X48 TRUCK SLICK UPPER 45 58.6 46.9 16723147 24X48 TRUCK SLICK UPPER 45 83.1 66.5 221224147* 10X44 UNDERBODY ADJ. BRACKETS LOWER 45 13.8 11.0 5624437* 12X41 CHEVY VAN UNIVERSAL LOWER 45 18.3 14.6 77256271 14X37 CAR TRUNK UNIVERSAL UPPER 45 22.1 17.7 81
Motor Fuel Style
All tanks on this page are manufactured to meet or exceed theAmerican Society of Mechanical Engineers (ASME) specifications.
Don’t missthe accessories on
the next 3 pages!
79New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
ACCESSORIES FOR MOTORFUEL TANKS
Heavy Duty Strap Brackets
PART NUMBER SIZE BRACKETS DESCRIPTION WEIGHT2636* 14" PAIR, STANDARD DUTY 362518 16" PAIR, STANDARD DUTY 372506 18" PAIR, STANDARD DUTY 4125291 18" PAIR,HEAVY DUTY FOR SCHOOL BUS, ETC. 822507 20" PAIR, STANDARD DUTY 4225071 20" PAIR, HEAVY DUTY 8425091 24" PAIR, HEAVY DUTY 101
Auto-stop Filler Valve
RegO Relief Valves – Fully Internal “Pop Action”8543 Series relief valves are designed for use as a primary relief valve in larger ASMEmotor fuel containers such as on buses, trucks and construction equipment.
8544 Series relief valves are designed for use as a primary relief valve in smaller ASMEand DOT motor fuel containers such as on tractors, lift trucks, cars and taxicabs.
START TO HEIGHTDISCHARGE CONTAINER OVERALL ABOVE HEX
PART CONTAINER SETTING CONNECTION HEIGHT COUPLING WRENCHINGNUMBER TYPE PSIG M.NPT (APPROX.) (APPROX.) SECTION8544T ASME 312 1" 5 7⁄16" 7⁄8" 1 5⁄16"8543T ASME 312 1 1⁄4" 5 7⁄16" 7⁄8" 1 11⁄16"
* Special order.
V13414TRIPLE-L
* Requires a 3/4" fill valve.
PART NUMBER DESCRIPTION
V13414 CEODEUX 80% STOP-FILL VALVE-3/4" MPT
RegO Check Filler Valve
Designed to provide fast filling offorklift, motor fuel, and recreationalvehicle tanks.
Replacement Fill Cap – Part Number: 3174-9P
ACME TANKPART HOSE CONNECTION
NUMBER STYLE CONNECTION M.NPT
7647SCT w/Lanyard & Cap 1 3/4" 3/4"
For more accessories, see the next 2 pages.
80 Order on-line: www.tarantin.com
TANKSTANKS
MANCHESTER RV ASME VAPOR SERVICE TANKS
ASME Permanent Mount Tanks for Motor Home and Van
Cylinders Mounting Brackets for RVs
622076814
MODEL NUMBER SIZE BRACKET VALVE WATER CAP. T.W.
6810 8X30 ADJUSTABLE LOWER 45 6.0 45
6813 10X23 ADJUSTABLE LOWER 45 7.1 40
6814 10X32 ADJUSTABLE LOWER 45 10.2 46
6840 12X28 TOP ANGLE SIDE FIT 12.2 50
6802 12X32 UNIVERSAL SIDE FIT 14.4 60
6819 12X42 UNIVERSAL SIDE FIT 19.4 75
6820 12X42 UNIVERSAL LOWER 45 19.4 75
6804 14X40 UNIVERSAL SIDE FIT 23.8 90
62207* 10X32 UNIVERSAL SIDE FIT 9.9 34
* CATERING TRUCK TANK
Note: Above tanks include float gauge, but dial is additional. Specify standard or remote dial.
ACCESSORIES
PART NUMBER DESCRIPTION
1803 30 LB DUAL RACK COMPLETE
1811 40 LB DUAL RACK COMPLETE
1805 20 LB CENTER ROD 3/8" X 18"
1806 30 LB CENTER ROD 3/8" X 24"
1807 40 LB CENTER ROD 3/8" X 30"
1809 WING NUT ONLY 3/8"
1810 DUAL RACK BASEW/3/8" NUT
1588 HOLD DOWN BAR
1589 REGULATOR MOUNTING BRACKET
All tanks on this page are manufactured to meet or exceed the American Society of Mechanical Engineers (ASME) specifications.
81New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
RV TANK ACCESSORIES AND REPLACEMENT PARTS
PART NUMBER DESCRIPTION
290-00 Vent Over Outlet
299-00 9 O’clock Vent
The first stage features a lever arm designthat improves both the efficiency andregulation. Combined with the second stageregulator, the overall performance assureseven smoother and more continuous flow ofgas to all appliances. 160,000 BTU capacity.
Regulators – Twin Stage Regulator Cover
Extend-A-Stay and Extend-A-Flow
863-00P Both First andSecond StageCovers in Bagwith Header Card
RegO Check Filler Valve
Designed to provide fast filling offorklift, motor fuel, and recreationalvehicle tanks.
Replacement Fill Cap – Part Number: 3194-9P
ACME TANKPART HOSE CONNECTION
NUMBER STYLE CONNECTION M.NPT
7647SCT w/Lanyard & Cap 1 3/4" 3/4"
Typical Extend-A-StayMotorhome Installation
Extend-A-Stay536-00 Standard Kit with 5 ft.pigtail and tee fitting
537-00 Deluxe Kit with tee fit-ting, 12 ft. hose and 5 ft. pigtail
PART NUMBER DESCRIPTION
G12653 Dial, gauge ASME
RegO Relief Valves – Fully Internal “Pop Action”8543 Series relief valves are designed for use as a primary relief valve in larger ASME motor fuelcontainers such as on buses, trucks and construction equipment.
8544 Series relief valves are designed for use as a primary relief valve in smaller ASME and DOT motorfuel containers such as on tractors, lift trucks, cars and taxicabs.
PART CONTAINER START TO DISCHARGE CONTAINER OVERALL HEIGHT HEIGHT ABOVE HEX WRENCHINGNUMBER TYPE SETTING PSIG CONNECTION M.NPT (APPROX.) COUPLING (APPROX.) SECTION8544T ASME 312 1" 5 7⁄16" 7⁄8" 1 5⁄16"8543T ASME 312 1 1⁄4" 5 7⁄16" 7⁄8" 1 11⁄16"
538-00Extend-A-Flow PlusQCC/TYPE 1
G12653
82 Order on-line: www.tarantin.com
TANKSTANKS
MANUAL PROPANE FLARE TOWER
MINUTEMAN TANK ANCHORING SYSTEM FOR FLOOD PLAIN TIEDOWN
• Flare Up to 529 Gallons/HR• No Electricity Required• Compact & Portable Design• Quick & Easy Setup• Simple to Use• Great for Emergency Evacuation Situations• Stable & Sturdy Construction• Made in the USA
High waters can dislodge unachoredtanks causing spills, environmentaland property damage.• Loose tanks may explode
causing injuries.• Buried tanks can be pushed
to the surface by the buoyanteffect of soil saturatedby water.
• Floating tanks becomebattering rams causingproperty damage.
PART NUMBER DESCRIPTION USE
1346 36" Earth Anchor w/ 4" & 6" Disks Dense / Normal Soil
1593 36" Earth Anchor w/ 4" & 6" Disks & Stabilizer Dense / Medium Soil
1284 50" Earth Anchor w/ Doulde 4" Disks Loose to Medium Soil
2391 Dry Concrete Anchor w/ Bolt Expansion Sleeve Concrete - Dry
2010-Minute Split Bolt and Nut All Anchors
2365 Stainless Steel Sling w/Sheathed Strap & Seals For Vertical Cylinders
2375 Stainless Steel Strap 100 Ft Roll
2382 Strap Sheathing - 150 Feet
2730 Minute Man Drive Machine
2741 Minute Man Anchor Adapter
PART NUMBER DESCRIPTION
PFM-16LPS 1/2" Manual Flare
PFM-25 25' Hose Extension Kit
Note: 120 gal. to 350 gal. tanksneed 1 strap and 2 anchors,351 gal. tanks to 1500 gal. tanksrequire 2 straps and 4 anchors.
PFM-25
PFM-16LPSPlease note:cylinder not included
83New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
TRINITY UNDERGROUND TANKS
No Mastic Needed!Red Oxide Powder Coating Epoxy Designed for Immediate Burial
• Duplicate Data Plates• Convenient and Easy Anode Attachment,
allows for Testing of Cathodic Protection• Available 14" or 28" Risers• Vacuum Pre-purged• Seamless Dome• Plastic Rust Free Domes
TANK SIZE N U M B E R P E R OVERALL OUTSIDE O V E R A L L H E I G H T WEIGHTINW.G. STACK LOAD LENGTH DIAMETER 14" RISER 28" RISER LBS
120 GAL* 9 63 5' 5 7/8" 24" 3' 9 7/8" 4' 8 3/8" 252250 GAL* 7 35 7' 2 1/2" 31.5" 4' 5 3/8" 5' 3 3/8" 472320 GAL* 7 28 8' 11 3/4" 31.5" 4' 5 3/8" 5' 3 3/8" 588500 GAL* 5 25 9' 10" 37.42" 4' 11 3/8" 5' 9 7/8" 9211000 GAL* 5 15 15' 10 7/8" 40.96" 5' 2 7/8" 6' 1 3/8" 17312000 GAL* 4 8 23' 9 3/8" 46.614" 5' 8 13/16" 6' 7 5/16" 3685
Trinity Underground Tanks
* Tanks are available with short or long risers
R E G OC H E K - L O K V A LV E S
TANK SIZE MULTIVALVES BOTTOM 1 1/4" TOP 3/4"120WG G8475RV 7591U 7590U250WG G8475RV 7591U 7590U320WG G8475RV 7591U 7590U500WG G8475RV 7591U 7590U1000WG G8475RV 7591U 7590U2000WG G8475RV 7591U 7590U
Replacement Valves for Trinity Underground Tanks
S Q U I B B T A Y L O R R O C H E S T E R R E P L A C E M E N T D I A LTANK F L O A T G A U G E S F L O A T G A U G E S SQUIBBSIZE 14" RISER 28" RISER 14" RISER 28" RISER TAYLOR ROCHESTER
120WG JB213B JB340A 6281-0490 6281-0491 2700CV 5-01813250WG JB251A JB376A 6281-0534 6281-0535 2700CV 5-01813320WG JB251A JB376A 6281-0534 6281-0535 2700CV 5-01813500WG JB277A JB404D 6281-0427 6281-0426 2700CV 5-018131000WG JB297A JB424C 6281-0524 6281-0418 2700CV 5-018132000WG JB450D 2700CV
Replacement Float Gauges for Trinity Underground Tanks
Overall LengthLid & ShroudAssembly
Top of ReliefValve
LiquidWithdrawal
Riser Height
All tanks on this page are manufactured to meet or exceed theAmerican Society of Mechanical Engineers (ASME) specifications.
84 Order on-line: www.tarantin.com
TANKSTANKS
TRINITY ABOVEGROUND AND ABOVE/UNDERGROUND TANKS
• Powder Coated for Long Lasting Protection• Vacuum Pre-purged• AG/UG with Red Oxide Underground Protection• Available in a Wide Range of Colors• AG/UG Plastic Rust Free Domes
Overall Length
Leg Spacing
Plug
DomeLiquidWithdrawal
Relief Valve
TANK SIZE N U M B E R P E R OVERALL OUTSIDE OVERALL LEG LEG WEIGHTINW.G. STACK LOAD LENGTH DIAMETER HEIGHT WIDTH WIDTH LBS
120 GAL 12 96 5' 5 7/8" 24" 3' 9 7/8" 10 1/8" 3' 245250 GAL 9 63 7' 2 1/2" 31.5" 4' 5 3/8" 12 3/4" 3' 6" 472320 GAL 9 45 8' 11 3/4" 31.5" 4' 5 3/8" 12 3/4" 4' 1/4" 588500 GAL 6 30 9' 10" 37.42" 4' 11 3/8" 15" 5' 8711000 GAL 5 15 15' 10 7/8" 40.96" 5' 2 7/8" 16 1/4" 9' 17292000 GAL 4 8 23' 9 3/8" 46.614" 5' 8 13/16" 21" 20' 3676
Trinity Aboveground and Above/Underground Tanks
Replacement Parts for Trinity Aboveground and Above/Underground Tanks
Replacement Parts for Trinity Aboveground and Above/Underground Tanks
TANK REGO CHEK-LOK VALVES RELIEF FILLERSIZE MULTIVALVES BOTTOM 1 1/4" TOP 3/4" VALVE VALVE
120WG 7556RT DT 6.7 7591U 7590U 7583G 7579T250WG 7556RT DT 8.5 7591U 7590U 7583G 7579T320WG 7556RT DT 8.5 7591U 7590U 7583G 7579T500WG 7556RT DT 10.5 7591U 7590U 8684G 7579T1000WG 7556RT DT 11.3 7591U 7590U 8685G 7579T2000WG 7556RT DT 12.7 7591U 7590U 8685G 7579T
SQUIBB ROCHESTER R E P L A C E M E N T D I A LTANK TAYLOR GAUGES GAUGES SQUIBBSIZE 1" MNPT 1" SCREW TAYLOR ROCHESTER
120WG HA130A B8981-1224 2701CV 5-01749250WG HA162A B8981-1232 2701CV 5-01749320WG HA162A B8981-1232 2701CV 5-01749500WG HA194A B8981-1237 2701CV 5-017491000WG HA210A B8981-1241 2701CV 5-017492000WG B8981-1146 2701CV
All tanks on this page are manufactured to meet or exceed theAmerican Society of Mechanical Engineers (ASME) specifications.
85New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
AMERICAN WELDING & TANK REPLACEMENT PARTS
DIP TUBE FILLER RELIEF FLOAT JR SCREW REPLACE L I Q U I D C H E C K V A L V ETANK SIZE MULTIVALVE LENGTH VALVE VALVE 1 1/4" 1" DIAL 1-1 1/4" BOT. 3/4" TOP
120 GAL 7556RT12.0 7 7579 7583G TA130A HA130A 5-01749 N/A 7590U
150 GAL 7556RT12.0 7 7579 7583G TA130A HA130A 5-01749 N/A 7590U
250 GAL 7556RT12.0 9 7579 7583G TA160A HA160A 5-01749 Optional 7590U
325 GAL 7556RT12.0 9 7579 7583G TA160A HA160A 5-01749 Optional 7590U
500 GAL 7556RT12.0 10 7579 8684G TA194A HA194A 5-01749 Plugged 7590U
850 GAL 7556RT12.0 11.1 7579 8685G HA210A 5-01749 Plugged 7590U
1000 GAL 7556RT12.0 11 7579 8685G TA210A HA210A 5-01749 Plugged 7590U
1450 GAL 7556RT13.0 13 7579 8685G TA240A 5-01749 Plugged 7591U
1990 GAL 7556RT13.0 13 7579 8685G TA240A 5-01749 Plugged 7591U
PART NUMBER DESCRIPTION
MV3231G Relief Valve
19104-80 Service Valve Repair Bonnet
8475-50 Filler Valve Repair
8475-51A Vapor Equalizing Kit
Replacement Parts for G8475RV
TANK JR F LOAT GAUGE REPLACE D O M E & L I D CHECK LOCKSIZE MULTIVALVE 11 1/4" 18 1/4" DIAL 8-1/2" RISER 15-1/2" RISER VALVE
120 GAL G8475RV JB232A JB302A 5-01813 Dome U/G 18 Dome U/G 24 7572FC
150 GAL G8475RV JB232A JB302A 5-01813 Dome U/G 18 Dome U/G 24 7572FC
250 GAL G8475RV JB262A JB332A 5-01813 Dome U/G 18 Dome U/G 24 7572FC
325 GAL G8475RV JB262A JB332A 5-01813 Dome U/G 18 Dome U/G 24 7572FC
500 GAL G8475RV JB296A JB370F 5-01813 Dome U/G 18 Dome U/G 24 7572FC
850 GAL G8475RV 5-01813 Dome U/G 18 Dome U/G 24 7572FC
1000 GAL G8475RV JB316C JB386D 5-01813 Dome U/G 18 Dome U/G 24 7572FC
1450 GAL G8475RV 5-01813 Dome U/G 18 Dome U/G 24 7572FC
1990 GAL G8475RV 5-01813 Dome U/G 18 Dome U/G 24 7572FC
Aboveground and Above/Underground Tank Replacement Parts
Underground Tank Replacement Parts
86 Order on-line: www.tarantin.com
TANKSTANKS
UNDERGROUND ANCHORING EQUIPMENT
MAGNESIUM ANODE BAG
ELECTRODE EXTENSION
ANODE SPLICE
ANODE MONITORING STATION
ANODE TEST KIT
For 500 and 1000 Gallon TanksDesigned to secure both 500and 1000 gallon U/G Tanks
PURGE-IT-VAC ADAPTER
PART NUMBER KIT CONTAINSUG-KIT (2) 1/2" X 15FT CABLES
(4) 1/2" X 6 TURNBUCKLES(20) 1/2" CABLE CLIPS(4) 1/2" X 9" X 15" ANCHORS
PART NUMBER DESCRIPTION
6A 6A Half Cell Reference Electrode
16906 Copper Sulfate
17105 Copper Sulfate Anti-Freeze
5, 9, and 17lb anodewith 10ft X #12 gaugeelectrical lead attached.Bagged and boxed forshipping protection.
Utilized inconjunction withpre-mounted anodelead wires onUnderground Tanks.Includes burndy crimp and heat-shrink sleeve. Basic pliersor electrical crimp tool provide a solid connection.
RISER PIPE CLAMP
Retrofit anode connection forexisting or new undergroundtanks.
Part Number: RPC.1
Part Numbers:MG-5LB MG-9LB MG-17LB
BSK-1
When buried in the ground, provides a central pointwhere 4 or 5 underground tank anodes can be monitored.
• ABS plastic shaft
• PVC terminal board
• Heavy-duty cast iron
cover and collar
Anode Test Kit includes:• 6A half cell - reference electrode• Digital multimeter w/wired probes• Storage case
Part Number: ATK-1
• No labor• No wasted propane
The purge-it-vac allows you to insertmethanol and your first fill of propanewithout disconnecting the adapter. Thepurge-it vac adapter is easy to use and meets NPGA#133-899a) on the purging of LP-Gas containers.Part Number: Purge-It-Vac
30" longintermediateelectrode extension.
Can be used with MCM model ETM, I.A. and LCseries meters or between the electrode and the standardelectrode extension so that the electrode can be easilyplaced at the desired location inside manholes, watertanks, etc. Will fit through a 1" diameter augered hole.Part Number: 16203
WIRELESS LP GAS TANK LEVEL METER
• Numerical and Graphic LCD Display• Remote Transmitter – weather tight• Wireless Operation up to 150 feet
from basePart Number: RS-228
Part Number: NM-4 4 Terminal
Part Number: NM-5 5 Terminal
87New Jersey New Hampshire Pennsylvania Virginia North Carolina Florida800-922-0724 800-895-8265 888-972-6323 866-828-2657 910-829-4980 866-837-1810
TANKS
TANKS
MANCHESTER VERTICAL DISPENSING TANK
The Advantages of Manchester Tank’s Quality Vertical Dispensers• Dispensers are very visible and great for advertising.• Space saving verticals only require 78.5 sq. ft. (10 ft. diameter), plus the necessary
clearances in accordance with N.F.P.A. Pamphlet No. 58 and /or local codes.• Valuable time and materials are saved in preparing a concrete foundation.• Portable bases make it easier to relocate dispensers.• Base supports the dispenser to safely endure up to a Seismic Zone 4 and 120 MPH winds.
Bases available for our 660, 1150, 1250 and 1600 gal. dispensers.• All Manchester Tank dispensers are National Board registered.Complete installation instructions will be shipped with the tank and are also availablethrough customer service.
CATALOG NUMBER W.C. L.P. CAP. DIA. HT. TANK HT. W.P. T.W.
29014 660 528 3' 6" 11' 9.5" 9' 11" 250 2025
22014 1150 920 4' 15' 1.5" 13' 3" 250 2878
29016 1600 1280 4' 19' 10.5" 18' 250 4120
23354 2000 1600 4' 6" 18' 7.5" 250 4540
* Base, crash post and railings are not available on #23354(2000 gal. tank)
CATALOG NUMBER DESCRIPTION SHIP.WEIGHT
29005* 10ft. x Shape Steel Dispenser Base 413 lbs.
22774* Crash Posts and Protective Railing 305 lbs.
1A. Liquid Line= 1 1/4" NPT and 2" NPT for 1600& 2000 gal. (only)
1B. Liquid line= 1 1/4" (all)2A. Relief= 1 1/4" NPT (all)2B. Relief= 3/4" NPT for 1600 & 2000 gal.3. Vapor line= 3/4" NPT with Excess Flow Check4. Outage= 1/4" NPT5. Sight Gauge= QTY.(2) SR.6. Fill= 1 1/4" NPT with 1 3/4" ACME Fill7. Vapor Return= 3/4" NPT with Excess FlowCheck
All tanks on this page are manufactured to meet or exceed theAmerican Society of Mechanical Engineers (ASME) specifications.
Imagine your company’s name on the side of oneof these beauties – what great advertising.
Call for a quotation today!