03 rad install guide for fedora 14 part 3

5/12/2018 03 RAD Install Guide for Fedora 14 Part 3 - slidepdf.com

http://slidepdf.com/reader/full/03-rad-install-guide-for-fedora-14-part-3 1/31

www.ibm.com/developerworks/tgmc/india

Step - 3 Install RAD

1. Change your system date to 15 December 2008. Because our

installation manager is old so it will give an error at the time of

installation if we proceed with current date.

For changing the date run this command in terminal and press enter.

Command is: date<space>121514232008

http://www.ibm.com/developerworks/tgmc/india





2. Open my computer and locate to the first CD of RAD installation (i.e.

RAD_7.5_DVD_1)

3. Open a terminal and type this command to change the directory.

cd<space><path>

path can be written in terminal by drag and drop the RAD_7.5_DVD_1

folder on terminal as shown below.






After drag and drop complete path is automatically written in terminal

now press Enter.






4. Install libstdc++ which is the prerequisite for RAD on linux. (libstdc++

is not included in the RAD installation folder, I mailed you separately

this file, use only that one.)

Copy and paste this file in RAD_7.5_DVD_1 folder

Now in the previously opened terminal where we drag and drop the

path run this command to install libstdc++ as shown below.

rpm<space>-ivh<space>compat-libstdc++-33-3.2.3-

68.i686.rpm






It will install libstdc++ in your system. Now we have to install ibm-java-

jre for RAD which is in DVD_1 folder.

To install it run this command in that terminal.

rpm<space>-ivh<space>ibm-java-i386-jre-6.0-2.0.i386.rpm

5. Now we are ready to install RAD go to

RAD_SETUP/InstallerImage_linux folder in DVD_1 of RAD. And type

this command in terminal to change the directory.

cd<space><path>

path can be written in terminal by drag and drop theInstallerImage_linux folder on terminal as shown below.






Now press enter in terminal and run this command in terminal to start

setup of RAD.

./install

Command is (<dot><slash>install)

It will start setup of installation manager as shown below.






Click Next






Click I accept then click next.






Click next.






Click Install.






After installation completed click on Restart Installation Manager.






Click Install icon.






Select the first and last option in check box. First for RAD 7.5 and last for

WAS 7.0 and then click next.






Click I accept then click next.






Click next.






Deselect the enable administrative security on the profile and click next.






Click on ok for warning and click on Install button.






At the mid of installation it will ask for disk1 of WAS70 click on browse and

select the path of disk 1 and click ok.






After this installation will resume and completed successfully.






Click finish.






Step – 4 Post install settings

1. Setting the path of xulrunner library in eclipse.ini file

For this open terminal and run this command.

gedit<space>/opt/IBM/SDP/eclipse.ini

Please note that caps must be written in caps and small must be written

in small in the terminal.

It will open gedit and eclipse.ini loaded in it add a line to the bottom of this file as shown below.






Line to be added is this:

-Dorg.eclipse.swt.browser.XULRunnerPath=/usr/lib/xulrunner-1.9.2/xulrunner






Now everything is done start the RAD.



03 rad install guide for fedora 14 part 3

Documents