1

DC Stick

MMA

AC/DC Tig

TIG

New Zealand Limited

AC/DC TIG/MMAAC/DC TIG/MMAMULTIFUNCTIONMULTIFUNCTION

●● XA TIG200 AC/DCXA TIG200 AC/DC●● XA TIG315 AC/DCXA TIG315 AC/DC

2

DC Stick

MMA

AC/DC Tig

TIG

Technical DataPower Supply / Phases (V-Ph) 240V - 1 ±15%Rated Input Power (KVA) 5.8ieff (Amps) 17Rated Input Current (A) 24Rated Output 20-170A/26.8V MMA 10-200A/17.4V TIGNo-Load Voltage (V) 56Duty Cycle @ 40ºC as per AS/NZ60974 20%@170Amps MMA 20%@200Amps TIGDuty Cycle @ 25ºC (approximate) 50%@170Amps MMA 50%@200Amps TIGEffi ciency (%) 85Power Factor 0.93Protection Class IP21SInsulation Class FSize (mm) 510x330x360Weight (kg) 30KgWarranty 2 years on power source

Overview

XA-WC30-230VWater Cooler Option

XA-TR200ACDCTrolley Option

Welds: Aluminium, Zinc Alloy, Steels, Alloy Steels, Stainless, Cast Iron, Bronze, Copper

Certified - AS/NZ60974.1

AC/DC INVERTER WELDER AC/DC INVERTER WELDER SQUARE WAVE 200 AMPSQUARE WAVE 200 AMP

TIG 200Amp AC/DC Welding MachineSquare Wave, Pulse, Remote Control

X A-TIG200PXPX A-TIG200PXP

WARRANTY

Features• Latest IGBT Inverter Technology• AC/DC Tig (AC/DC tungsten inert gas welding)• HF Tig Function (provides easy arc start, prevents tungsten damage)• 2/4T Trigger Function• AC Square Wave with Adjustable AC Balance Control• Adjustable Pulse Control - 0.5 - 300Hz• Adjustable Base Current 10-90%• Adjustable Down Slope 0-10 sec• Adjustable Post Gas 0-10 sec• MMA (stick electrode)• Hot start (improves electrode starting)• Arc Force (stabilises the arc with diffi cult to use electrodes)• Remote Amperage Control - Optional

XA-RFCRemote Foot Control Option

The XA-TIG200PXP is a 240V square wave AC/DC TIG inverter welder incorporating full TIG functionality including AC balance control, pre gas, down slope, post gas, variable pulse parameters, HF start with 2/4T trigger control. The HF arc start provides easy arc ignition leaving no tungsten inclusion and no contamination of the tungsten electrode. The Down Slope and Post Gas combined with the 2/4T trigger function gives you control of the welder allowing you to control the start and fi nish of the weld process at a professional level. The addition of a fully adjustable pulse function of frequency, base current and pulse width gives you the added capability to bet-ter control heat input into the work, control penetration & control distortion. AC balance control lets you set the AC TIG arc for clean-ing of the oxide layer on aluminium and adjustment for a deeper penetrating weld. Combining the functions of the XA TIG200PPXP ensures comprehensive control of the welding parameters when welding both AC and DC weldable materials giving you the ability to produce professional Tig welds. The DC MMA welding capability delivers a smooth and stable arc allowing easy welding with elec-trodes obtaining high quality welds including cast Iron, stainless and low hydrogen. Addition of the optional Foot Control provides vari-able amperage adjustment during. The Xcel-Arc TIG200PXP has set the benchmark for 240V single phase AC/DC welders and made it ideal for multiple applications; aluminium & stainless steel fabrication, light industrial use, repair and maintenance applications.Robust & reliable, built to our specifi cation and manufactured in compliance to AS/NZ60974.1

Product Code: XA-TIG200PXP-KStandard option includes: XA-TIG200PXP-AC/DC Machine, XA26 Tig Torch x 4m, Earth Lead & Arc Lead 25mm x 5m, Argon Regulator

ER1MS-10Remote Foot Control Option

3

DC Stick

MMA

AC/DC Tig

TIG

Technical DataPower Supply / Phases (V-Ph) 415V- 3±15%Rated Input Power (KVA) 12.2ieff (Amps) 13Rated Input Current (A) 24Rated Output 20-250A MMA 10-315A TIGNo-Load Voltage (V) 30Duty Cycle @ 40ºC as per AS/NZ60974 20%@250Amps MMA 20%@300Amps TIGDuty Cycle @ 25ºC (approximate) 50%@250Amps MMA 50%@300Amps TIGEffi ciency (%) 85Power Factor 0.93Protection Class IP21SInsulation Class FSize (mm) 560x365x355Weight (kg) 37KgWarranty 2 years on power source

Welds: Aluminium, Zinc Alloy, Steels, Alloy Steels, Stainless, Cast Iron, Bronze, Copper

Certified - AS/NZ60974.1

AC/DC INVERTER WELDER AC/DC INVERTER WELDER SQUARE WAVE 315 AMPSQUARE WAVE 315 AMP

TIG 315Amp AC/DC Welding MachineSquare Wave, Pulse, Remote Control

X A-TIG315P-AC/DCX A-TIG315P-AC/DC

Overview

WARRANTY

XA-WC30-230VWater Cooler Option

XA-TR315ACDCTrolley Option

Features• Latest IGBT Inverter Technology• AC/DC Tig (AC/DC tungsten inert gas welding)• HF Tig Function (provides easy arc start, prevents tungsten damage)• 2/4T Trigger Function• AC Square Wave with Adjustable AC Balance Control• Adjustable Pulse Control - 0.5 - 300Hz• Adjustable Base Current 10-90%• Adjustable Down Slope 0-10 sec• Adjustable Post Gas 0-10 sec• MMA (stick electrode)• Hot start (improves electrode starting)• Arc Force (stabilises the arc with diffi cult to use electrodes)• Remote Amperage Control - Optional

The XA-TIG315AC/DC is a 3 phase Square Wave AC/DC TIG inverter welder incorporating full TIG functionality including AC balance control, pre gas, down slope, post gas, variable pulse parameters, HF start with 2/4T trigger control. The HF arc ignition provides easy arcignition leaving no tungsten inclusion and no contamination of the tungsten electrode. The Down Slope and Post Gas combined with the 2/4T trigger function gives you control of the welder allowing you to control the start and fi nsh of the weld process at a professional level. The addition of a fully adjustable pulse function of frequency, base current and pulse width gives you the added capability to better control heat input into the work, control penetration & control distortion. AC balance control lets you set the AC TIG arc for cleaning of the oxide layer on aluminium and adjustment for a deeper penetrating weld. Combining the functions of the XA TIG315P AC/DC ensures comprehensive control of the welding parameters when welding both AC and DC weldable materials giving you the ability to produce professional Tig welds. The DC MMA welding capability delivers a smooth and stable arc allowing easy welding with electrodes obtaining high quality welds including cast Iron, stainless and low hydrogen. Addition of the optional Foot Control provides variable amperage adjustmentduring. Optional trolley provides better manoeuvrability and accepts internal installation of the optional water cooler. The XATIG315P AC/DC is an industrial workhorse AC/DC welder and is ideal for multiple applications; aluminium & stainless steel fabrication, light industrial use, repair and maintenance applications. Robust & reliable, built to our specifi cation and manufactured in compliance to AS/NZ60974.1

Product Code: XA-TIG315PACDC-KStandard option includes: XA-TIG315PAC/DC Machine, XA26 Tig Torch x 4m, Earth Lead & Arc Lead 25mm x 5m, Argon Regulator

XCEL-ARCXCEL-ARC

XCEL-ARC

XCEL-ARC

XA-RFCRemote Foot Control Option

ER1MS-10Remote Foot Control Option

4

DC Stick

MMA

AC/DC Tig

TIG

XA-TR200ACDCTrolley for 200ACDC Welder

XCEL-ARCXCEL-ARC

XCEL-ARC

XCEL-ARC

Certified - AS/NZ60974.1

TIG/MMA WELDER TIG/MMA WELDER ACCESSORY ITEMSACCESSORY ITEMS

WARRANTY

TIG/MMA WELDER ACCESORIESTIG/MMA WELDER ACCESORIES

XA-WC30-230VWater Cooler -230V Single Phase• Rated Power 150W• Flow Rate of 5.3 l/min• Maximum start pressure of 500 kpa (70 psi)• Reservoir volume of 1.75 litre• In built fan cooled radiator • Quick connect water couplings• Independent on/off switch• Dimensions 415 x 220 x 380mm• Weight 18kg

XA-RFCRemote Amperage Foot Control

ER1MS-10Remote Amperage Hand Control

• Sturdy metal construction• Ergonomic angle for pedal control• Strong return spring• Doubles as remote manual amperage control

• Fingertip control of amperage at the torch during welding.• Can be replaced in 5 seconds without the use of tools.

• Sturdy metal construction• Solid rear rubber wheels• Heavy duty castor wheels• Drawer for spares, leads, etc

XA-TR315ACDCTrolley for 315ACDC Welder • Accepts installation WC-30 water cooler• Sturdy metal construction• Solid rear rubber wheels• Heavy duty castor wheels• Drawer for spares, leads, etc

5

DC Stick

MMA

AC/DC Tig

TIGMULTIWAVE

Welds: Aluminium, Zinc Alloy, Steels, Alloy Steels, Stainless, Cast Iron, Bronze, Copper

Certified - AS/NZ60974.1

AC/DC INVERTER WELDER AC/DC INVERTER WELDER MULTIWAVE 200 AMPMULTIWAVE 200 AMP

TIG 200Amp AC/DC Welding MachineSquare Wave, Pulse, Remote Control

MULTIWAVE 200ACDCMULTIWAVE 200ACDC

WARRANTY

MULTI WAVE is the most innovative multifunction power source system specifi cally developed for Tig AC/DC. The welding performance is enhanced due to the “multi wave technology” that creates the improved waveform for any TIG application with SMOOTH ARC, reducing the noise emission of the arc and improving the quality of the welding.Digital Tig AC/DC for single phase 230V ac applications. It is light and easy to use for most applications and helps also the unskilled welders to reach exceptional results with a self learning user interface. All the innovations of the Multi Wave family are built in this portable machine with the result of higher thickness of welding material at faster speed also with single phase power supply.

CFC - Continuous Frequency Controlfor the best arc stability at any thickness.TAC - True Average Current Controlallows the true energy of the arc with control over the effectiveness of the output current.FWC - Full Wave Form Controlfrom real square wave up to true sine wave, the arc is adapted to any material and any current with smoother arc and lower noise.ABC - Asymmetrical Balance Controlimproving balance controls for high current, high effi ciency and high speed welding.MIX AC - AC Mixed Arc Controlinnovative AC welding, thicker material and higher speed with light torches such as in DC welding.MIX DC - DC Mixed Arc Controlinnovative system that allows welding with gaps without fi ller material.

REDEFINING ARC IGNITION AND STABILITYHighest arc stability is available with the Multi wave process.Thanks to the new innovative system of “FORCED ARC ™” the ignition of the arc is faster and direct - with or without high frequency. Also in AC function maintaining the arc does not require high frequency in any situation. With this innovation, arc ignition can be performed using a simple lift arc technique without causing any tungsten damage. High frequency can be selected in AC and DC welding mode, but only for arc ignition. With this system automatic applications are possible, also it can be used in environments where the use of High Frequency is forbidden. Now with Multi Wave it is possible to weld with confi dence and maximum arc stability, especially in environments such as hospitals, airports, power stations...The use of the Multi Wave in robotic and automated situations eliminates the main problem of reliability of the robotic and CNC controllers when used for TIG process.

EASY TO USEA full synergic program table allows for quick use by expert welders as well as an optimal approach for less experienced operators. Synergy is easy and fast to set; all that is required is to choose the type of welding, material type and the size of the tungsten. The welder can adjust the welding current or simply just select the material thickness that he wants to weld. Frequency waveforms of the softness, balance, pulsation, slope, cycle level, timing of gas and also the parameters for cold wire are automatically available at optimal values. In this operating mode, all innovations of the Multi wave system are used at optimal preset values and adjusted automatically during any change of the welding current.

SIMPLE EASY CONTROLA robust system with touch control is used for settings selection. This system is shock proof being able to take strong impact without failure. Control settings are easily made via the front panel using the touch pads and dial controls. The advanced technology is complex but the user friendly front panel makes for simple control and easy operation of the machine. Use of the new enhanced processes are made easy.

6

DC Stick

MMA

AC/DC Tig

TIGMULTIWAVE

Technical DataPower Supply / Phases (V-Ph) 240V - 1 ±15%Fuses(Tig) T25 AmpRated duty cycle 10 min @ 40 °C 40% EDRated secondary current 200 AmpsPermanent sec. current 100% 25 AmpsRated Power (Stick) 5,4 KVAPermanent power 100% (Stick) 3,1 KVAPermanent power (Tig) 3,1 KVAOverload protection ThermalFrequency TIG AC mode 20 ÷ 200 HZNo load voltage (S) (K) 102 VoltsMax secondary current 200 AmpsShort circuit limit 220 AmpsStick electrode possibility mm 3,25mmRegulation fi eld in STICK mode 20 - 160 AmpsRegulation fi eld in TIG DC mode 05 - 200 AmpsRegulation fi eld in TIG AC mode 10 - 200 AmpsBalance TIG AC mode % 10 ÷ 90Protection class IP 21Insulation class HHot Start OKAnti Sticking OKArc Force OKTig ignition Tig HF or Lift ArcRemote control receptacle AnalogVRD Voltage reduction device 20V OK.Width-Height-Length 310 x 430 x 550mmWeight 18Kg

MULTIWAVE 200ACDCMULTIWAVE 200ACDC

Features• Latest AC/DC Welding Technology• AC/DC Tig / MMA • 230V Single Phase• Simple to Use• Manual or Synergic Operation• Mix Arc AC• Deeper Penetration in AC• Mix Arc DC• Bridge & Weld Gaps in DC without Filler Wire• AC with Full Wave Formation Control• Pulse Tig Synergic or Manual Adjustment• HF or Lift Arc Ignition• Memory Set and Recall of Settings• Full Function Trigger Control 2T, 4T, 2S, 4S• MMA (stick electrode)• Hot start (improves electrode starting)• Arc Force (stabilises the arc with diffi cult to use electrodes)• Remote Amperage Control - Optional

Product Code: V0095AA-KStandard option includes: MULTIWAVE 200ACDC Machine, XA26 Tig Torch x 4m, Earth Lead & Arc Lead 25mm x 5m, Argon Regulator

Certified - AS/NZ60974.1

AC/DC INVERTER WELDER AC/DC INVERTER WELDER SQUARE WAVE 315 AMPSQUARE WAVE 315 AMP

WARRANTY

XA-RFCRemote Foot Control Option

ER1MS-10Remote Foot Control Option