04 01-03 cr 201203 - elepon · elepon e.c.a.p. corporation 【4 metering pumps ・・・...
TRANSCRIPT
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 1
4.Metering Pumps
ELEPON FEEDER CR-N and CRM Series are designed as the direct-motion diaphragm injection pumps as safe and multipurpose pumps and also low-cast pumps. These pumps are used as the injection pump for water treatment chemicals or the chemical injection pumps for many other kinds of fields.
CONSTRUCTIONS
● CR-N Series、CRA-N Series: servo control model
CR-2N CR-3-2N CR-5N CR-2DN
CR-6DN CR-40DN CRA-N Series CRK-N Series
CRP-N Series (Special specification)
Nanoparticle correspondence ・CRK-N Series:A motor with general-purpose base is adopted. ・CRP-N Series:CRP-N Series pump is Permanent Magnet Synchronous Motor Model.
※Special inverter for the motor is needed to drive this pump. ※As for the motor, indoor specifications are standards.
Specifically, please make an inquiry.
● CRM Series: the discharge amount is under 1,400mℓ/min.
CRM-02 CRM-12 CRM-70
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 2
FEATURES ・Wetted parts of the pump resist fluids of wide range. ・Standard types ( up to 300 mPa・s.) and high viscosity types ( up to 2,000 mPa・s ). ・The compact design features less parts, and maintenance and inspection is easy. Hose connections and
flange connections are also possible. ・The small capacity pump (Models CR-1N to CR-3N) uses a planetary gear two-stage reduction
mechanism, and medium- and large-capacity pumps of 200W or more use a worm gear reduction mechanism to provide long-term worry-free continuous operation.
・The discharge volume can be manually adjusted regardless of whether the pump is running or stopped.
・Adjustment of the quantity of discharge by the manual operation is possible any time when the pump is in operation or is not in operation.
APPLICATIONS ・Corrosive chemical solutions, acids and alkalis ・Photograph developing solutions, fixers, bleaching solutions and inks ・Sea water, Salt water and pure water ・Soy sauce, vinegar, brewery, and fruit juice ・Plating solutions, surface treating apparatus, and filtration system ・Medical apparatus, physicochemical apparatus, and thermostatic baths ・Drugs, chemicals, and cosmetics ・Etching apparatus for electronic parts, and photochemical processes ・Dyeing equipment and waste liquid treating units ・Alkaline batteries, and storage batteries ・Refrigerators, cold counters, and coolers ・Vending machines for beverages, and ice machines Laboratories, test rooms and test plants Processes ・For hot water circulation ・Other apparatus and equipment
Pump Head: PVC ACRYLIC SUS PVDF
Discharge Quantity Control Dial
Double reduction mechanism with planetary gears
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 3
4-1.Metering Pumps CR-N Series
MODEL CODE
Standard A 6 A Servo control model B 10/13
①MODEL
K Motor with general-purpose base is adopted
C 12
P Permanent Magnet Synchronous Motor Model
D 15
Single E 20 D Double G 25
J 40
②Pump Head Type
T Triple head type (Only as for 100V of CR-1N - 3N) K 50
P PVC L 65 Q PVC(High viscosity)
⑦Suction / Discharge Size
(mm)
N 8 A Acrylics 1 100V
B Acrylics (High viscosity) 2 200V
D PVDF 3 220V 4 SUS-304 4 380V 6 SUS-316 5 400V
4L SUS-304L 6 415V
③Pump Head Materials
6L SUS-316L 7 440V F FKM
⑧Motor Voltage
Z Others E EPDM S 1-phase P PTFE T I 3-phase(Indoor)
④O-ring Materials
Z Others T O 3-phase(Outdoor)
C Ceramic E I Increased safety explosion-proof type motors(Indoor)
P PTFE E OIncreased safety explosion-proof type motors(Outdoor)
S SUS-316 D IFlame-proof and explosion-proof type motors(Indoor)
⑤ Ball Valves Materials
H Hastelloy C D OFlame-proof and explosion-proof type motors(Outdoor)
F Flange I I Inverter(Indoor) H Hose I O Inverter(Outdoor) N Threads connection
⑨ Motor
Z Others U Union A ANSI (150#)
⑥ Suction / Discharge Materials
Z Others
Pump Head MODEL
Type Materials O-ring
BallValve
Suction Discharge Motor
① ② ③ ④ ⑤ ⑥ ⑦ ⑥ ⑦ ⑧ ⑨
CR □ - 1□N - P F C H A / H A - 2 TI
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 4
STANDARD MATERIALS FOR WETTING PARTS
PVC Acrylics Stainless Steel (SUS-304) PVDF
Diaphragm Lock Nut PVC PVC Stainless Steel (SUS-304) PVDF
Suction and Discharge Connector PVC PVC Stainless Steel (SUS-304) PVDF
Diaphragm PTFE PTFE PTFE PTFE
Ball Valve Ceramics Ceramics Stainless Steel (SUS-316) PTFE
O-ring FKM FKM PTFE PTFE
● SUS-304 is the standard. If you require SUS-316, please specify.
STANDARD ACCESSORIES (Material: PVC)
MODEL Braid Hose Strainer Reducer Oil Injection Port
CR-1N 、CR-1-2N φ6mm×φ11mm×4m 1 - 1
CR-2N φ6mm×φ11mm×4m 1 - 1
CR-2-2N - 1 - -
CR-3N 、CR-3-2N - 1 - -
CR-4DN - 2 0.3 ℓ -
CR-4N (5DN) - 1 (2) 0.3 ℓ -
CR-5N (6DN) - 1 (2) 0.3 ℓ -
CR-6N (10DN) - 1 (2) 0.3 ℓ -
CR-10aN (20DN) - - 0.7 ℓ (1 ℓ ) -
CR-20aN (40DN) - - 0.7 ℓ (1 ℓ ) -
CR-30aN (60DN) - - 0.7 ℓ (1 ℓ ) -
SPECIFICATIONS
CR-N Series
●SINGLE HEAD TYPE
Capacity (mℓ/min)
Connection Size (mm)
MODEL
50Hz 60Hz
MaximumDischargePressure
(Mpa)
Motor Rating Output PVC
ACRYLICS SUS PVDF
Weight(PVC)(kg)
SuctionHead (m)
CR-1N 6~ 60 7~ 75
CR-1-2N 14~ 140 17~ 170 1.3
CR-2N 27~ 270 33~ 330
φ6×φ11 Hose
20.5 -1.5
CR-2-2N 68~ 680 82~ 820 1.0
1-phase 100V3-phase 200V
0.1kW OutdoorJIS 10K 13A
Flange
R 3/8φ8×φ10
PTFE Hose
21.5 -1.5
Pump Head Material PARTS
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 5
CR-3N 100~1,000 120~1,200
CR-3-2N 160~1,600
(150~ 1,500)
190~1,900 (180~ 1,800)
0.7 1-phase 100V3-phase 200V
0.1kW Outdoor
JIS 10K 15AFlange
R 1/2JIS 10K
15A Flange
22 -1.5
CR-4N 210~2,100
(205~ 2,050)
250~2,500 (245~ 2,450)
3-phase 200V0.2kW
29 -1.5
CR-5N 260~2,600
(250~ 2,500)
310~3,100 (300~ 3,000)
0.5 JIS 10K 20A
Flange R 3/4
JIS 10K 20A
Flange 32 -1.5
CR-6N 500~5,000
(480~ 4,800)
600~6,000 (575~ 5,750)
0.3
3-phase 200V0.4kW
JIS 10K 25AFlange
R 1 JIS 10K
25A Flange
38.5 -1.5
CR-10aN 1,000~
10,500 1,200~
12,500 0.5 JIS 10K 40A Flange 80 -1.0
CR-20aN 2,000~
20,500 2,400~
24,400
3-phase 200V0.75kW Outdoor
JIS 10K 50A Flange 90 -1.0
CR-30aN 3,000~
30,000 3,600~
36,000
0.3 3-phase 200V
1.5kW OutdoorJIS 10K 65A Flange 100 -1.0
●DOUBLE HEAD TYPE (the flow rates below are dual)Capacity (mℓ/min) Connection Size (mm)
MODEL 50Hz 60Hz
MaximumDischargePressure(MPa)
Motor Rating Output PVC
ACRYLICSSUS PVDF
Weight(PVC)( kg )
SuctionHead( m )
CR-1DN 12~ 120 15~ 150
CR-1D-2N 28~ 280 34~ 340 1.3 22.5 -1.5
CR-2DN 54~ 540 66~ 660
φ6×φ11Hose
23.5 -1.5
CR-2D-2N 136~ 1,360 164~1,640 1.0 JIS 10K
13A Flange
R 3/8 φ8×φ10
PTFE Hose
24.5 -1.5
CR-3DN 200~ 2,000 240~2,400 0.7
1-phase100V3-phase 200V
0.1kW Outdoor
JIS 10K 15A
Flange R 1/2
JIS 10K 15A
Flange 25.5 -1.5
CR-4DN 210~ 2,100
(205~ 2,050)
250~2,500 (245~2,450)
32 -1.5
CR-5DN 420~ 4,200
(410~ 4,100)
500~5,000 (490~4,900)
3-phase 200V0.2kW
33 -1.5
CR-6DN 520~ 5,200
(500~ 5,000)
620~6,200 (600~6,000)
0.5 JIS 10K
20A Flange
R 3/4 JIS 10K
20A Flange
37 -1.5
CR-10DN
1,000~
10,000 (960~ 9,600)
1,200~12,000 (1,150~
11,500) 0.3
3-phase 200V0.4kW
JIS 10K 25A
Flange R 1
JIS 10K 25A
Flange 42.5 -1.5
CR-20DN 2,100~
21,000 2,500~
25,000 0.5
3-phase 200V1.5kW
Outdoor JIS 10K 40A Flange 130 -1
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 6
CR-40DN 4,100~
41,000 5,000~
50,000 JIS 10K 50A Flange 145 -1
CR-60DN 5,800~
58,000 7,000~
70,000
0.3 3-phase 200V
1.5kW Outdoor
JIS 10K 65A Flange 150 -1
*Note: We also have triple-head types, CR-1TN, CR-2TN and CR-3TN, which discharge three times as much
as shingle-head types. We have standard types (up to 300mPa・s) and high viscosity types (up to 2,000mPa・s). Please specify
the type you need when you place your order. Please inquire to us in case of using the slurry. Available liguid temperature range is 0~50℃ (PVC) or 0~80℃ (stainless Steel, PVDF). Standard specifications of connection pipe size etc. are described at table above. We can change them according to your needs. The discharge quantities in the ( ) are data of SUS pump head.
CRA-N Series
APPLICATIONS Combination use with conductivity meter, pH meter, ORP meter, residual chlorine meter, liquid
level gage and other control device.FEATURES Full-automatic operation Continuous control Wide range of application possible by adding controller A certain response to the input signal brings the stable driving. Stable quantity of discharge is ensured by use of Elepon’s reliable CR-N type feeder. You can control
the discharge (0% to 100%) manually during operation or stops. With CR-N series you can controlthe quantity of flow automatically using electric signals from automatic controllers.
※ example of control
※ example of combination
E.E. Positioner MODEL:E-661 ・・・ with proportional action
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 7
Capacity (mℓ/min) Servo Control Motor Spec.
MODEL 50Hz 60Hz
MaximumDischargePressure
(MPa) Model Motor
100V
Control Speed
0~100% 50Hz/60Hz
E.E. Positioner
Weight(PVC) (kg)
CRA-1N 0~60 0~75 1.3 24
CRA-1-2N 0~140 0~170 1.3 24
CRA-2N 0~270 0~330 1.0 24.5
CRA-2-2N 0~680 0~820 1.0 25
CRA-3N 0~1,000 0~1,200 0.7 26
CRA-3-2N 0~1,600
(0~1,500) 0~1,900
(0~1,800) 0.7
CM-102P 6W 13.3/11 sec.
26
CRA-4N 0~2,100
(0~2,050) 0~2,500
(0~2,450) 0.5 CM-102-1P 6W 22.8/19 sec. 34
CRA-5N 0~2,600
(0~2,500) 0~3,100
(0~3,000) 0.5 37
CRA-6N 0~5,000
(0~4,800) 0~6,000
(0~5,750) 0.3
CM-102-2P 6W 27.6/23 sec. 43.5
CRA-10aN 0~10,500 0~12,500 0.5 CM-2410P 60W 17 /14 sec. 95
CRA-20aN 0~20,500 0~24,400 0.3 CM-2420P 60W 23 /19 sec. 105
CRA-30aN 0~30,000 0~36,000 0.3 CM-2430P 60W 24 /20 sec.
MODEL E-660,E-661Input signal
4~20mA DC
120
*Note: The discharge quantities in the ( ) are data of SUS pump head.
CRK-N Series (Various kinds of motors can be installed.)
FEATURES
Various kinds of motors can be installed. ・Inverter motors ・Increased safty explosion-proof type motors ・Flame-proof and explosion-proof type motors
Please inquire an order by a motor of the special specification.
SPECIAL SPECIFICATION: CRP-N Series (Permanent Magnet Synchronous Motor Model)
FEATURES CRP-N series is using a PM motor.
Compared with the CR-N Series・・・・ELECTRICITY SAVING
・DOWNSIZED
・LIGHT-WEIGHTED
・DISCHARGING PERFORMANCE IMPROVED
Please inquire for more information.
Usage example
CR-N series CRP-N series
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 8
SPECIAL SPECIFICATION: Nanoparticle correspondence
FEATURES In order to transport the dispersed nanoparticle,
it is the pump which reduced the dead space inside a pump to the limit.
※It proposes the design development of the pump at a low price according to needs, and consult, please.
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 9
PERFORMANCE CURVE
Dial scale Dial scale Dial scale Dial scale
Dial scale
Capacity mℓ/min
Capacitymℓ/min
Capacitymℓ/min
Capacitymℓ/min
Capacity mℓ/min
Capacitymℓ/min
Capacitymℓ/min
Capacitymℓ/min
Dial scale Dial scale Dial scale
Dial scale Dial scale Dial scale Dial scale
Dial scale
Capacity mℓ/min
Capacitymℓ/min
Capacitymℓ/min
Capacitymℓ/min
Capacity mℓ/min
Capacitymℓ/min
Capacitymℓ/min
Capacitymℓ/min
Dial scale Dial scale Dial scale
Capacity mℓ/min
Capacitymℓ/min
Capacitymℓ/min
Dial scale Dial scale Dial scale
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 10
4-2. Matering Pumps CRM Series 4-
MODEL CODE
Suction Discharge Motor PumpHead O-ring Ball
Valve Materials Size Materials Size Voltage PhaseMODEL
① ② ③ ④ ⑤ ④ ⑤ ⑥ ⑦
CRM-02 P F C H A - H A - 2 T I
P PVC A 6 Q PVC(High viscosity) B 10/13 4 SUS-304 C 12 6 SUS-316 D 15
4L SUS-304L
⑤
Suction / Discharge Size (mm) M 4
①
Pump Head Type
6L SUS-316L 1 100V F FKM 2 200V E EPDM 3 220V P PTFE 4 380V
②
O-ring Materials
Z Others 5 400V C Ceramics 6 415V S SUS-316 7 440V
③
Ball Valve Materials H Hastelloy C
⑥
Motor Voltage
Z Others F Flange S 1-phase H Hose TO 3-phase(Outdoor)
N Threads connection EIIncreased safety explosion-proof type motors(indoor) 3-phase 200V only
U Union
⑦
Motor Phase
Z Others A ANSI(150#)
④
Suction / Discharge
Materials
Z Others
STANDARD MATERIALS FOR WETTING PARTS
PVC SUS
Suction and Discharge Connectors PVC SUS-304
Diaphragm PTFE PTFE
Ball Valve Ceramic SUS-316
O-ring FKM PTFE
● SUS-304 is the standard. If you require SUS-316, please specify.
Pump Head Materials
PARTS
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 11
STANDARD ACCESSORIES (Material: PVC)
SPECIFICATIONS
Capacity (mℓ/min) Connection Size
MODEL 50Hz 60Hz
MaximumDischargePressure
(MPa)
Motor Rating Output PVC
ACRYLICS SUS
Weight(PVC) ( kg )
SuctionHead ( m )
CRM-02 2 ~20 2.4 ~24 1 -1.0
CRM-04 4 ~40 4.8 ~48 1 6.5
-1.0
CRM-12 12 ~120 14 ~140 1 -1.0
CRM-24 24 ~240 28 ~280 0.7
25W
φ4×φ9 Hose
JIS 10K 13A Flange
R 3/8
7.5 -1.0
CRM-70 64 ~640 76 ~760 -1.0
CRM-140 110~1,100
140~1,400
0.5
1-phase 100V1-phase 200V3-phase 200V
40W
φ15×φ22 Hose
JIS 10K 15A Flange
R 1/2 12 -1.0
MODEL Braid Hose Strainer Injection Port
CRM-02 φ4mm×φ9mm×3m 1 1
CRM-04 φ4mm×φ9mm×3m 1 1
CRM-12 φ6mm×φ11mm×4m 1 -
CRM-24 φ6mm×φ11mm×4m 1 -
CRM-70、140 - 1 -
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 12
PERFORMANCE CURVE
Dial scale Dial scale Dial scale
Dial scale Dial scale Dial scale
Capacity mℓ/min
Capacity mℓ/min
Capacity mℓ/min
Capacity mℓ/min
Capacity mℓ/min
Capacity mℓ/min
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 13
4-3. Option (FOR CR-N, CRM Series)
COUPLING
TYPE : A TYPE : B TYPE : C TYPE : D
Flange×Hose Flange×Hose Screw×Hose Screw×Hose
●Flange×Hose size:mm Connection Size (mm) MODEL Flange Hose
Connection Type
JP-13F-4H φ4× φ9 JP-13F-6H φ6×φ11
A
JP-13F-12H JIS 10K 13A
φ12×φ18 B JP-15F-4H φ4× φ9 JP-15F-6H φ6×φ11
A
JP-15F-12H φ12×φ18 JP-15F-15H
JIS 10K 15A
φ15×φ22 JP-20F-19H JIS 10K 20A φ19×φ26 JP-25F-25H JIS 10K 25A φ25×φ33 JP-40F-38H JIS 10K 40A φ38×φ48 JP-50F-50H JIS 10K 50A φ50×φ62 JP-65F-63H JIS 10K 65A φ63×φ80
B
● Materials: PVC●Screw×Hose
MODEL Connection Size Hose (mm)
Connection Type
JP-1/2-4H φ4× φ9 JP-1/2-6H φ6×φ11
C
JP-1/2-12H φ12×φ18 JP-1/2-15H φ15×φ22
D
● Materials: PVC
MIXER AIR CHAMBER
AIR CHAMBER
PRESSURE GAUGE
PRESSURE GAUGE
PRESSURE GAUGE
SAFETY VALVE
BACK PRESSURE
VALVE BACK
PRESSUREVALVE
SAFETY VALVE
MIXER
STRAINER STRAINER
FLOW CHECKER
PUMP STAND
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 14
BACK PRESSURE VALVE
BP-4/6HK BP-6HK BP-15FV
MODEL Material Connecting Pipe
Aperture (mm)
MaximumAmount ofDischarge(L/min)
Range of set Pressure
(Standard Setting Pressure)
(MPa)
Weight(kg)
Metering Pumps
BP-4/6HK PVC φ4×φ9 Hose×R1/2 φ6×φ11 Hose×R1/2
0.3 fixed at 0.15 0.13 CRM-02、04、12、24
BP-06HK PVC φ6×φ11 Hose 0.5 fixed at 0.15 0.5 CR-1N、1-2N、2N
BP-13FK fixed at 0.15 0.6
BP-13FV PVC JIS10K13A Flange 1.0
0.1~0.3(0.15) 1
CRM-02、04、12、24 CR-1N、1-2N、2N、2-2N
BP-15FK fixed at 0.15 0.7 CRM-70、140
BP-15FV PVC JIS10K15A Flange 2.0
0.1~0.3(0.15) 1 CR-3N、3-2N
BP-20FV PVC JIS10K20A Flange 6.0 0.1~0.3(0.1) 1 CR-4N、5N、4DN、5DN、6DN
BP-25FV PVC JIS10K25A Flange 15.0 0.1~0.3(0.1) 2 CR-6N、10DN
BP-40FV PVC JIS10K40A Flange 40.0 0.1~0.3(0.1) 4 CR-10aN
BP-50FV PVC JIS10K50A Flange 40.0 0.1~0.3(0.1) 4.5 CR-20aN、30aN
BS-10NV 3/8 Screwed 1.0 2
BS-10FV SUS
JIS10K10A Flange 3.0 0.1~0.3(0.15)
3
CRM-02、04、12、24 CR-1N、1-2N、2N、2-2N
BS-15NV 1/2 Screwed 2.0 2
BS-15FV SUS
JIS10K15A Flange 3.0 0.1~0.3(0.15)
3
CRM-70、140 CR-3N、3-2N
BS-20NV 3/4 Screwed 6.0 2
BS-20FV SUS
JIS10K20A Flange 4.0 0.1~0.3(0.1)
4 CR-4N、5N、4DN、5DN、6DN
BS-25NV 1 Screwed 15.0 4
BS-25FV SUS
JIS10K25A Flange 7.0 0.1~0.3(0.1)
7 CR-6N、10DN
BS-40NV 1 1/2 Screwed 40.0 12
BS-40FV SUS
JIS10K40A Flange 15.0 0.1~0.3(0.1)
15 CR-10aN、20aN、30aN
BF-13FV PVDF JIS10K13A Flange 1.0 0.1~0.3(0.15) 1 CR-1N、1-2N、2N、2-2N
BF-15FV PVDF JIS10K15A Flange 2.0 0.1~0.3(0.15) 1.5 CR-3N、3-2N
BF-20FV PVDF JIS10K20A Flange 6.0 0.1~0.3(0.1) 1.5 CR-4N、5N、4DN、5DN、6DN
BF-25FV PVDF JIS10K25A Flange 15.0 0.1~0.3(0.1) 2 CR-6N、10DN
BF-40FV PVDF JIS10K40A Flange 40.0 0.1~0.3(0.1) 4 CR-10aN、20aN、30aN
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 15
SAFETY VALVE When the abnormal high pressure which is caused by closed valve or by the blockade of the foreign substance is inside of the discharge pipe, the safty valve will be opened automatically so that the damage of a pump or piping may be prevented.
MODEL Material
Connecting Pipe Aperture
(mm)
MaximumAmount ofDischarge(L/min)
Range of set Pressure
(Standard setting Pressure)
(MPa)
Weight(kg)
Metering Pumps
RP-13FV JIS 10K 13A Flange
RP-15FV PVC
JIS 10K 15A Flange
6 0.2~0.5 (0.3) 1 CRM-02 、04 、12 、24、70 、140 CR-1N 、1-2N 、2N 、2-2N、3N 、
3-2N
RP-20FV PVC JIS 10K 20A Flange 25 0.2~0.5 (0.3) 1.5 CR-4N 、5N、4DN 、5DN 、6DN
RP-25FV PVC JIS 10K 25A Flange 0.2~0.5 (0.3) 1.5 CR-6N 、 10DN 、 10aN 、 20aN 、
30aN
RS-10NV Rc 3/8 Srewed
40
2
RS-10FV JIS 10K 10A Flange
RS-15FV
SUS
JIS 10K 15A Flange 6
0.2~0.5 (0.3) 4
CRM-02 、04 、12 、24 CRM-70 、140 CR-1N 、1-2N 、2N 、2-2N、3N 、
3-2N
RS-20NV Rc 3/4 Srewed
RS-20FV SUS
JIS 10K 20A Flange 25 0.2~0.5 (0.3) 4
CR-4N 、5NCR-4DN 、5DN 、6DN
RS-25NV Rc 1 Srewed 4
RS-25FV SUS
JIS 10K 25A Flange 40 0.2~0.5 (0.3)
7
CR-6N 、10DN、10aN 、20aN 、
30aN
RF-13FV JIS 10K 13A Flange
RF-15FV PVDF
JIS 10K 15A Flange 6 0.2~0.5 (0.3) 1
CR-1N 、1-2N 、2N 、2-2N、3N 、
3-2N
RF-20FV PVDF JIS 10K 20A Flange 25 0.2~0.5 (0.3) 1.5 CR-4N 、5N、4DN 、5DN 、6DN
RF-25FV PVDF JIS 10K 25A Flange 40 0.2~0.5 (0.3) 2 CR-6N 、10DN、10aN 、20aN 、
30aN
ELEPON E.C.A.P. Corporation 【4 METERING PUMPS ・・・ 4-1.CR-N,4-2.CRM,4-3.OPTIONS】Ver.201203 16
AIR CHAMBER Pulsation is a detriment of reciprocating pumps. Please install an air chamber when pulsation must be prevented.
MODEL Material
Connection Pipe Size
(mm)
Range of set Pressure
(Standard setting Pressure)
(MPa)
Volume (L)
Adaptable Pumps
APN-X10-13F PVC JIS10K13A Flange 0.5 0.9 CRM-02、04、12、24 CR-1N、1-2N、2N、2-2N
APN-X15-15F PVC JIS10K15A Flange 0.5 1.4 CRM-70、140 CR-3N、3-2N
APN-Y30-20F PVC JIS10K20A Flange 0.5 2.5 CR-4N、5N、4DN、5DN、6DN
APN-Y40-25F PVC JIS10K25A Flange 0.5 3.7 CR-6N、10DN
APN-Z100-40F PVC JIS10K40A Flange 0.5 10 CR-10aN
APN-Z160-50F PVC JIS10K50A Flange 0.3 16 CR-20aN
APN-Z230-65F PVC JIS10K65A Flange 0.3 23 CR-30aN
AP-150-40F(with base) PVC JIS10K40A Flange 0.5 8 CR-10aN
AP-200-50F(with base) PVC JIS10K50A Flange 0.3 17 CR-20aN
AP-200-65F (with base) PVC JIS10K65A Flange 0.3 17 CR-30aN
AS-50-10N SUS 3/8 screwed 0.5 0.7
AS-50-10F SUS JIS10K10A Flange 0.5 0.7
CRM-02、04、12、24 CR-1N、1-2N、2N、2-2N
AS-80-15N SUS 1/2 screwed 0.5 1.5
AS-80-15F SUS JIS10K15A Flange 0.5 1.5
CRM-70、140 CR-3N、3-2N
AS-100-20N SUS 3/4 screwed 0.5 2.5
AS-100-20F SUS JIS10K20A Flange 0.5 2.5 CR-4N、5N、4DN、5DN、6DN
AS-150-25N SUS 1 screwed 0.5 5.3
AS-150-25F SUS JIS10K25A Flange 0.5 5.3 CR-6N、10DN
AS-150-40F SUS JIS10K40A Flange 0.5 10 CR-10aN
AS-200-50F SUS JIS10K50A Flange 0.3 17 CR-20aN
AS-200-65F SUS JIS10K65A Flange 0.3 17 CR-30aN
AF-50-13F PVDF JIS10K13A Flange 0.3 0.7 CR-1N、1-2N、2N、2-2N
AF-80-15F PVDF JIS10K15A Flange 0.3 1.5 CR-3N、3-2N
AF-100-20F PVDF JIS10K20A Flange 0.3 2 CR-4N、5N、4DN、5DN、6DN
AF-100-25F PVDF JIS10K25A Flange 0.3 4.9 CR-6N、10DN
ReferenceElepon E.C.A.P. Corporation Osakashinai Bld., 3-2-23, Kitahama, Chuo-ku Osaka-shi, Osaka, 541-0041, Japan
E-mail:[email protected] URL:http://www.elepon.co.jp