04 automotive ebook
DESCRIPTION
04 Automotive eBookTRANSCRIPT
04AUTOMOTIVE EQUIPMENT04AUTOMOTIVE EQUIPMENT
From QUALITY BRANDS :
Air Conditioning for Automotive Air conditioning equipment ....................................................134 Recovery, recycling, and recharge .........................................116 Refrigerant identifier ..................................................................115 Refrigerant leak detector ..........................................................115Automotive Service Tool Parts washer ..................................................................................135 Timing gear puller .......................................................................135 Universal ball joint puller ..........................................................135Automotive Tester Pressure tester kit ........................................................................131Battery Charger Battery charger ....................................................... 129 – 131, 146 Battery tester .................................................................................129 Maintenance battery charger 12V .........................................129Battery Tester Battery tester .................................................................................147Body Repair Body repair equipment .................................................113 – 114Brake Fluid Tester Brake fluid tester ..........................................................................134Cable Connectiion Cable connection .........................................................................134Cable Jumper Cable jumper .................................................................................134Dynamometer Dynamometer ...................................................................125 – 128Engine Tune-up Inductive digital timing light ...................................................129 Timing light ....................................................................................129Exhaust Extractor System Exhaust extractor system ..............................................111 – 112Flashlight Flashlight ........................................................................................149Grease Dispenser Grease dispenser ..............................................................133 – 134Hose Reel Hose reel ................................................................................................Hydraulic Lifting Bottle jack .......................................................................................138 Coil spring compressor ..............................................................135 Engine crane ..................................................................................135 Farm jack .........................................................................................137 Frame straightener ......................................................................136 Hydraulic body repair kit ..........................................................135 Hydraulic garage jack .....................................................138 – 139 Hydraulic jack ................................................................................137 Jack stand .......................................................................................137 Motorcycle lift ...................................................................140 – 141 Pneumatic end lift for truck .....................................................140 Pneumatic hydraulic garage jack ...........................................139 Transmission jack .............................................................136 – 137Lifting Equipment Lifting equipment ...........................................................100 – 110 Single post lift .................................................................................91Lubrication Dispenser Oil dispenser ..................................................................................132Manual Lifting Engine stand ..................................................................................136Motorcycle Repair Tool Motorcycle repair tool....................................................142 – 144Motorcycle Service Equipment Motorcycle lift ...............................................................................122 Motorcycle tyre changer ................................................. 122, 141 Motorcycle wheel balancer ............................................ 122, 141Part Washer Part washer ....................................................................................145
Pressure Sprayer Pressure sprayer ...........................................................................133Seat Creeper Seat creeper ...................................................................................145Service and Tune-up Equipment Accessory for motorcycle gas analyzer ................................118 ATF changer ...................................................................................118 Four gas analyzer .........................................................................117 Injector cleaner and tester .......................................................119 Scanner ................................................................................120 – 121Testing Equipment Test lane ..............................................................................123 – 124Tyre Service Equipment Automatic tyre changer .....................................................96 – 97 Laser wheel alignment ................................................................95 Tyre changer automatic ..............................................................98 Tyre changer for industrial and mining .................................98 Tyre changer semi automatic ....................................................97 Wheel alignment ...........................................................................95 Wheel alignment 3D .....................................................................96 Wheel alignment 8 sensor wireless .........................................95 Wheel balancer ......................................................................92 – 94 Wheel balancer for car and truck .............................................93 Wheel balancer for truck .............................................................94Videoscope Videoscope ....................................................................................148Wall Mounted Oil Pump Wall mounted oil pump kit ......................................................133Wire Brush Wire brush ......................................................................................146
www.kawanlama.com 91AUTOMOTIVE EQUIPMENT
GA
RAG
E A
ND
LIF
TIN
G E
QU
IPM
ENT
SINGLE POST LIFTPneumatic Hydraulic Single Post Lift
Order No Type Description
KW1900513 KW19-513 Single Post Lift, Pneumatic Hydraulic 4Ton Type S
KW1900904 KW19-904 Single Post Lift, Pneumatic Hydraulic 4Ton Type M
Data SpecificationCapacity (kg) 4000Plunge Diameter (mm) 270Rise (mm) 17/10Adapter ReachMinimum Front (mm) 397Minimum Rear (mm) 397Maximum Front (mm) 936Maximum Rear (mm) 936Recommended Bay Site (m) 3x7*Minimum Compressor 3Hp for 1 unit Single Post
KW19-513
KW19-904
AUTOMOTIVE EQUIPMENT92
4
TYRE SERVICE EQUIPMENT
Features :• Monochrome 7 segment display• Manual data input• Multi operator program• Optimisation program• Hidden weight mode program• ALU-S program• Read-out accuracy 1g-5g
Order No. Type DescriptionLC0000015 KWB-402 Digital Wheel Balancer
Order No. Type DescriptionLC0000290 KWB-503 Wheel Balancer with Arm 3D Sensor
Data SpecificationMax. Wheel Weight (kg) 65Balancing Precision (gr) ± 2Rim Diameter (Inch) 10” - 22”Rim Width (Inch) 1.5”-18”Balancing Time (s) 7Rated Voltage (V/Hz) 220/50Motor Power (W) 370Balancing Speed (rpm) 240Working Noise (dB(A)) < 70Temperatur (C) 0°~50°Humidity (%) ≤ 85%Dimension (mm) 1080x1095x1130Weight (kg) 145
Wheel Balancer Standard KWB-402 Benefits :• Easy to read the display• Easy to operate• Compact dimension
Commercial Applications:Workshop and tyreshop
TYRE
SER
VIC
E E
QU
IPM
ENT
Pliers to Attach The Balance Wweight
Standard Lead Weight
Width Measure Scale
Shaft Positioning Cone and Locking Wing Nut
Assembly
Data SpecificationDiameter of Shaft (mm) 1.57” (40)Balancing Accuracy 0.05 oz (1g)Wheel Data Acquisition Manual and AutomaticRim Width (Inch) 1.5-20”Wheel Width Guard (Inch(mm)) 21” (530)Measurable Rim Diameter (Inch) 8-26”Max. Wheel Diameter with Guard 40” (1.000mm)Max. Wheel Weight (lbs(kg)) 154(70)Power Supply 230V/1PhaseCycle Time 7 Seconds (average 13”-16” wheel)
3D SENSOR ARMLED DISPLAY
Wheel Balancer Professional KWB-503
www.kawanlama.com 93AUTOMOTIVE EQUIPMENT
Wheel Balancer for Car and Truck KWB-1280
Order No Type DescriptionLC0000269 KWB-1280 Wheel Balancer For Trucks and Cars
Features :• Dynamic mode • Static mode• Standard ALU1, ALU2, ALU3, mode• ALUS mode• OPT (Optimization) mode• Truck/car measurement mode shift• Unit conversion in different countries (areas) g/oz, mm/inch• Self-calibration• Guard protection• Shelf-check error and diagnostics• Computer controlled whell pneumatic elevation• Chain protection of elevation process• Pneumatic brake fixed start lock, and auto unlock for
measurement again
Data SpecificationPower Supply 3phase/380Air Pressure 0.4 - 0.8PaProtection Class IP 54Power Consumption (W) 260Max. Rotating Speed (rpm) 180(car)
90(truck)Cycle Time (sec) Average 814Measurement Ranges
Gauge Length (mm) 10-300Rim Diameter (Inch) 10”-30”Wheel Width (Inch) 1.5”-20”Wheel Diameter (mm) <1200Wheel Weight (kg) <160kg
Error : ≤±1g 0.1 oz (car) ≤±10g 0.35 oz (truck)Noise (dB) ≤70Net Weight (kg) 350
Working Environment (C)Temperature : 20o~ 50o,
Humidity ≤85%
TYRE SERVICE EQUIPMENT
TYRE SERVICE EQUIPMENTWheel Balancer G2.117 Features :
• Monochrome graphic LCD display• Manual data input• Multi operator program• Optimisation program• Hidden weight mode program• ALU-S program• Motorcycle program (optional)• Read-out accuracy 1g-5g• Self calibration procedure by user
Benefits :• Easy to read the display
• Easy to operate
• Compact dimension
Commercial Applications:Workshop and tyreshop
Order No Type DescriptionRV0000173 G2. 117 Basic Wheel Balancer w/LCD
Data SpecificationDimension (mm) 450x450x926Rim Diameter (Inch) 10”-24”Rim Width (Inch) 1.5”-22”Max. Wheel Weight (kg) 65Read-Out Accuracy (g) 1Cycle Time (s) 7Rotation Speed (rpm) <100Power Supply (V/Hz) 230/50-60
TYRE
SER
VIC
E E
QU
IPM
ENT
AUTOMOTIVE EQUIPMENT94
4
TYRE SERVICE EQUIPMENTTY
RE S
ERV
ICE
EQ
UIP
MEN
T Wheel Balancer G4.140H
Commercial Applications:Workshop and tyreshop
Features :• Colour monitor TFT SVGA 17” • Automatic data input• Automatic stop• Multi operator program• Optimisation program• Hidden weight mode program• Automatic ALU-S and PAXprogram• 4 ALU programmes• Split program• Motorcycle program (optional)• Read-out accuracy 1g-5g• Self calibration procedure by user
Benefits :• Easy to read the display• Easy to operate
Order No Type Description
RV0000353 G4. 140H Elec. Wheel Balancer 17” Monitor, 3D Graphics
Data Specification
Dimension (mm) 1300x1170x1858
Rim Diameter (Inch) 10”-26”
Rim Width (Inch) 1.5”-22”
Max. Wheel Weight (kg) 70
Read-Out Accuracy (g) 1
Cycle Time (s) 6
Rotation Speed (rpm) <100
Power Supply (V/Hz) 230/50
Wheel Balancer for Trucks
Data GTL2.120H GTL2.120HC GTL4.128H GTL4.128HC GTL4.140H GTL4.140HCRim Siameter (Inch) 10”-30”Rim Width (Inch) 1.5”-22”MaxWheel Weight (kg) 200
Read-Out Accuracy (g) 5 (PL)1 (VL)
Cycle Time (s) 6Rotation Speed (rpm) 80Power Supply (V/Hz) 400V-50Hz-3ph
Display (mm) Backlit Graphic LCD Display 132 x40
Backlit Monochrome Graphic LCD Display Flat Screen 120 x90 Color Monitor TFT SVGA 17”
Standard Cones (mm) For Light Trucks Ø from 118 to 174
For Trucks Ø from 202 to 221 and 281
For Light Trucks Ø from 118 to 174
For Trucks Ø from 202 to 221 and 281
For Light Trucks Ø from 118 to 174
For Trucks Ø from 202 to 221 and 281
GTL4.140H/HC
Features :• Monochrome or colour LCD display• Tyre diameter 10” to 30”• Tyre width 1.5” To 22”• Wheel weight up to 200kg• Read-out accuracy 5g for trucks, 1g for cars
Display of GTL4.128H/HC
Display of GTL2.120H/HC
Order No Type Description
RV0000354 GTL2.120H Whl. Balancer f/ Light Trucks, 118 TO 174mm, Backlit LCD Display
RV0000355 GTL2.120HC Whl. Balancer f/ Trucks, 202-221 and 281mm, Backlit LCD Display
RV0000356 GTL4.128H Whl. Balancer f/ Light Trucks, 118 TO 174mm, Backlit Monochrome LCD
RV0000357 GTL4.128HC Whl. Balancer f/ Trucks, 202-221 and 281mm, Backlit Monochrome LCD
RV0000358 GTL4.140H Whl. Balancer f/ Light Trucks, 118 TO 174mm, Colour Monitor 17”
RV0000359 GTL4.140HC Whl. Balancer f/ Trucks, 202-221 and 281mm, Colour Monitor 17
• Rotation speed 80rpm• Automatic distance, automatic diameter
measurement, and automatic operation (for GTL4.128 and GTL4.140)
• Pneumatic wheel Lift 200kg
www.kawanlama.com 95AUTOMOTIVE EQUIPMENT
TYRE SERVICE EQUIPMENTLaser Wheel Alignment R108L
Features :• Simplicity• Speed• Accuracy
Commercial Applications:Workshop and tyreshop
Benefits :• Easy to use in all working areas• Contemporary reading of three angles• The calibration kit assures the accuracy and
precision of all operation
Order No Type DescriptionRV0000016 R-108L Laser Wheel Alignment R 108L
Data SpecificationWheel Clamp (Inch) 4 point 10”-17”Power 4 battery AAHead 2Truntable 2Steering Holder 2
Features :• Wireless (Bluetooth) Communication• 4 Heads, 8 CCD sensors• Data bank vehicle 20.000 data• Customer data bank• Run out by moving the vehicle
Benefits :• Bluetooth communication allows maximum mobility between different
working position• 4 heads 8 CCD sensors measuring all chracteristic angles of both vehicle axles• Vehicle data sheets to be filled local vehicle• Customer data bank recording 20,000 jobs with search by customer
name or vehicle plate number
Commercial Applications:Workshop and tyreshop
Order No Type DescriptionRV0000176 TD 1780 BTH Wheel Alignment 8 Sensor Wireless
(Bluetooth)
Data SpecificationDimension (mm) 1480x1110x860
Wheel Clamp (Inch) 4 point 10”-19”
Self Centering Lock Internal (Inch)
12” - 20.5”
Power 220V 50/60Hz, 250watt
Printer Colour printer
Wheel Alignment TD 1780 BTH
TYRE
SER
VIC
E E
QU
IPM
ENT
TYRE SERVICE EQUIPMENTWheel Alignment 8 Sensor Wireless X-631
Features :• 4 Heads,8 toe sensors with wireless communication• 20 degree CCD Camera• 6 meter wheelbase• 2.4 GHz data transfer• Data bank vehicle 50.000 data• Customer defined data bank
Benefits :• Measuring all characteristic angles of
both vehicle axles• Vehicle data sheets to be filled local
vehicle• Customer data bank recording
50.000 jobs with search by customer name or vehicle plate number
• Lower car function
Order No Type DescriptionLC0000245 X-631 Wheel Alignment 8 Sensor Radio Wireless
Data SpecificationItem Precision RangeFront Total Toe-in ± 2’ (± 0.04o) ± 40o
Front Toe-in ± 1’ (±0.02o) ± 20o
Front Camber ± 1’ (± 0.02o) ± 8.0o
Caster ± 6’ (± 0.1o) ± 20o
Kingpin Inclination ± 6’ (± 0.1o) ± 20o
Rear Total Toe-in ± 2’ (± 0.04o) ± 40o
Rear Toe-in ± 1’ (± 0.02o) ± 20o
Rear Camber ± 1’ (± 0.02o) ± 8.0o
Thrust Angle ± 2’ (± 0.04o) ± 5.0o
Universal Clamp MechanicalTurntables
Universal clamp aluminium kit
Placement platform for
proble rods and wheel clamps
Quick clamp
Sensor head Program Target Data
AUTOMOTIVE EQUIPMENT96
4
TYRE SERVICE EQUIPMENT
Benefits :• Wireless communication allows maximum mobility
between different working position• 4 heads sensors, 4 cameras measuring all chracteristic
angles of both vehicle axles• Vehicle data sheets to be filled local vehicle• Customer data bank recording 50,000 jobs with
search by customer name or vehicle plate number
Features :• 3D measurement• 4 Heads, 4 cameras• 4 metre wheel base• Data bank vehicle 50.000 data• Customer defined data bank• Fast ethernet data transfer
TYRE
SER
VIC
E E
QU
IPM
ENT
Order No Type DescriptionLC0000244 KWA-300 Wheel Alignment 3D
Available in 2 type (different pole height) :• Usewithscissorlift,•Usewithoutscissorlift
Semi Automatic Tyre Changer TWC-401NIC
Features :• Semi-automatic• Side swing mounting arm• Pneumatic locking
Order No Type DescriptionLC0000016 TWC-401 Semi Automatic Tyre Changer
Benefit :• Easy to operate
Commercial Application:Workshop and tyreshop
Automatic Tyre Changer TWC-502 NIC
Features :• Automatic• Tilt back mounting arm• Pneumatic locking
Benefit :• Easy to operate
Commercial Application:Workshop and tyreshop
Order No Type Description
LC0000064 TWC-502NIC Automatic Tyre Changer
Specification Precision RangeTotal Toe-in ±0.03o 0~±20o
Camber ±0.03o 0~±20o
Caster ±0.06o 0~±25o
Kingpin Inclination ±0.06o 0~±25o
Maximal Wheelbase it can Measure 4000mm
Powerless target
High-precision camera
Accurate wheel clamp
Wheel Alignment 3D KWA-300
Data SpecificationWorking Pressure (bar) 8 -10barMax. Wheel Width (mm) 360mmMax. Wheel Diameter (mm) 960mmMax. Rim Width (Inch) 14”Rim Clamping Dia. (outer) (Inch) 10”-18”Rim Clamping Dia. (inner) (Inch) 13”-20”Voltage (V/Hz) AC 220/50Motor Power (kW) 1.1Dimension (mm) 1020x810x1765Weight (kg) 204
Data SpecificationWorking Pressure (bar) 8-10Max. Wheel Width (mm) 420 Max. Wheel Diameter (mm) 1000Max. Rim Width (Inch) 14”Rim Clamping Dia. (outer) (Inch) 10”-20”Rim Clamping Dia. (inner) (Inch) 13”-23”Bead Breaker Force (N) ≥18000Voltage (V/Hz) AC 220/50Motor Power (kW) 1.1Rpm of Turntable (rpm) 6-8Torque of Turntable (Nm) 1070Dimension (mm) 1020x810x1765Weight (kg) 228
www.kawanlama.com 97AUTOMOTIVE EQUIPMENT
Automatic Tyre Changer TWC-502 RMB
Features :• Full automatic• Tilt back mounting arm• Pneumatic locking• Built in assistance
Benefit :• Easy to operate
Order No Type DescriptionLC0000087 TWC-502 RMB Automatic Tyre Changer
TYRE SERVICE EQUIPMENT
Commercial Application:Workshop and tyreshop
Level Bar
Press tyre
Support thelower beam
Mount tyre
TYRE
SER
VIC
E E
QU
IPM
ENT
Data SpecificationWorking pressure (bar) 8 -10Max. wheel width (mm) 420Max. wheel diameter (mm) 1000Max. rim width (inch) 14”Rim clamping dia. (outer) (inch) 10” - 20”Rim clamping dia. (inner) (inch) 13” - 23”Bead breaker force (N) ≥18000Voltage (V/Hz) AC 220/50Motor power (kW) 1.1Rpm of turntable (rpm) 6 - 8Torque of turntable (Nm) 1070Dimensions (mm) 1350 x950 x1765Weight (kg) 322
Features :• Tilt back arm• Right supplementary arm• 4 points assisting arm• Adjustable jaws• High volume bead blast fast
inflastion • Tool box• New design demount head• Smoother operation• Patent design for american market
Data Specification
Working pressure (bar) 8-10
Max. wheel width (mm) 350
Max. wheel diameter (mm) 1067
Rim clamping (outer)(Inch) 11” - 26”
Motor Power (kW) 1.1
Power Supply (V/phase) 220/ 1
Weight (kg) 320
Level bar
Press tyre
Support the lower beam
Mount tyre
Automatic Tyre Changer TWC-682RMB
Order No Type Description- TWC-682 RMB Automatic Tyre Changer
Tyre Changer Semi Automatic G7240I.20
Benefits :• Easy to operate.• Compact dimension.• Heavy duty structure to guarantee proper working condition at all times.
Commercial Application:Workshop and tyreshop
Features :• Semi automatic• Pneumatic locking• Clamping range 10” - 20” (External)• Self-centering chuck :2way rotation,• High torque, High clamping force (two operating pistons)• Bead seater (tubeless inflator)
Order No Type DescriptionRV0000376 G7240I.20 Tyre Changer Semi Automatic
Data SpecificationDimension (mm) 1834 x960 x1390Self centering lock external (Inch) 10” - 20”Self centering lock internal (inch) 12” - 22.5”Operating pressure (Bar) 8 – 10Motor (ph/V/kW) 3/ 220/0.55Chuck rotation speed (rev/min) 7.3Bead breaker pressure (kg) 3000Weight (kg) 203Noise level (db) <70Max. Tyre diameter (mm) 1030Max. Rim width (inch) 12
AUTOMOTIVE EQUIPMENT98
4
Commercial Application:Workshop and tyreshop
Order No Type DescriptionRV0000377 G7441IV.22 Tyre Changer Automatic
Data SpecificationDimension (mm) 1841x960x1678Self Centering Lock External (inch) 11”-22”Self Centering Lock Internal (inch) 13”-24.5”Operating Pressure (Bar) 8–10Motor (ph/V/kW) 3/220/1.1Chuck Rotation Speed (rev/min) 6.5-13Bead Breaker Pressure (kg) 3600Weight (kg) 212Noise Level (db) <70Max. Tyre Diameter (mm) 1050Max. Rim Width (inch) 12Max. Chuck Torque (nm) 1200
Features :• Automatic• Double rotation speed• Pneumatic locking• Clamping range 10”-22” (External)• Bead seater (tubeless inflator)• High capacity air tank for Tubeless inflate• Self-centering chuck :2way rotation High torque, High clamping force (two operating pistons)
Benefits :• Easy to operate• Compact dimension• Heavy duty structure to guarantee
proper working condition at all times
Tyre Changer Automatic G7441IV.22
TYRE
SER
VIC
E E
QU
IPM
ENT
TYRE SERVICE EQUIPMENT
Commercial Application:Workshop industrial, mining and tyreshop
Features for G96:• Tyre-changer for commercial vehicles 12”-26”• Double mount-demount tool for tube or tubeless tyres• Control unit can be rotated by 120
Benefits :• Easy to operate• Heavy duty structure to guarantee proper working
condition at all times.
Tyre Changer for Industrial and Mining
G96
Equipped with double mount demounttool to operate on tube or tubeless tyres
TYRE SERVICE EQUIPMENT
G108F
Thanks to the exclusive telescopic hook the tool no longer needs to be rotated The constant control of the hook enables the operator to carry out the most demanding procedures with precision and safety
The electro-brake allows immediate stopping of the rotation to avoid any damage to the tyre.
Electro Brake
Special Features for G108F :
Tele-Hook
The exclusive orbital movement (patent pending) of the bead breaking arm saves both time and space: the tool moves around the wheel, with no need to move the carriage
Orbital
Tyre Changer for Industrial and Mining
www.kawanlama.com 99AUTOMOTIVE EQUIPMENT
TYRE SERVICE EQUIPMENT
TYRE
SER
VIC
E E
QU
IPM
ENT
The stepped claws allow 80 mminternal diameter clamping withno need of accessories
Claws
Order No Type DescriptionRV0000128 G96 Truck Tyre Changer 12”-26”RV0000360 G9152.09 Truck Tyre Changer 11”-37”RV0000361 G9156.11 Truck Tyre Changer 11”-42”RV0000362 G10156.15M Truck Tyre Changer 11”-42”RV0000363 G10156.15 Truck Tyre Changer 11”-42” Auto Movement and RotationRV0000334 G10360.17 Truck Tyre Changer 11”-58” Auto Movement and Rotation
Technical Data G96 G9152.09 G9156.11 G9256.15SL G9256.15Chucking Unit Rotation Motor (kW) 2.2 1.3 - 1.85 1.3 - 1.85 1.3 - 1.85 1.3-1.85
Hydraulic Drive Unit Motor (kW) 0.75 2.2 2.2 1.85-2.5 1.85-2.5
Bead Breakerforce (N) 2000 3200 3200 3200 3200
Rim Diameter (inch) 12”-26” 11”-37” 11”-42” 11”-42” 11”-42”
Clamping Torque (Nm) 5000 5000 5300 5300
Min. Clamping Height From Floor (mm) 330 330 330 330
Min. Clamping Hole (mm) 110 90 90 90 90
Max. Wheel Diameter (mm) 1480 2350 2350 2450 2450
Max. Wheel Width (mm) 850 950 1100 1500 1500
Max. Wheel Weight (Kg) 1200 1200 1200 1200
Rotation Speed (rpm) 4/8 4/8 4/8 4/8
Carriage Double Speed No No No Yes Yes
Elecktro Brake No Yes Yes
Weight of Equipment (Kg) 460 No No 1150 1150
Controls Stand Alone Column
Aerial Arm (Rotation on
Console)
Aerial Arm (Rotation on
Console)
Bluetooth Console
Bluetooth Console
Stand by Function No No No Yes Yes
Tool Movement Manual Manual Manual Automatic Automatic
Tool Lifting Manual Manual Manual Manual Automatic
Tool Rotation Manual Manual Manual Quick-Fit Automatic
Base Frame No No No Yes Yes
Dimension/Size (LxWxH)(mm) 2135x1605x1280
2450x2200x1620
2520x2270x1685
2839x2214x1874
2839x2214x1874
Rim Diameter with G108A12(Max. Clamping) 11”-52” 11”-56” 11”-56” 11”-56”
Technical Data G10156.15M G10156.15 G10360.15 G10360.17
Chucking Unit Rotation Motor (kW) 1.3-1.85 1.3-1.85 1.5-2.2 1.5-2.2Hydraulic Drive Unit Motor (kW) 2.6 2.6 1.85-2.5 1.85-2.5Bead Breakerforce (N) 34000 34000 37000 37000Rim Diameter (inch) 11”-42” 11”-42” 11”-42” 11”-42”Clamping Torque (Nm) 5300 5300 5800 5800Min. Clamping Height From Floor (mm) 330 330 330 330
Min. Clamping Hole (mm) 90 90 90 90Max. Wheel Diameter (mm) 2550 2550 2700 2700
Max. Wheel Width (mm) 1500 1500 1500 1750
Max. Wheel Weight (kg) 1700 1700 2300 2300
Rotation Speed (rpm) 4/8 4/8 4/8 4/8Carriage Double Speed No No Yes YesElecktro Brake Optional Optional Yes YesWeight of Equipment (kg) 1070 1150 1400 1572
Controls Aerial Arm (Rota-tion on Console)
Bluetooth Console
Bluetooth Console
Bluetooth Console
Stand by Function No Yes Yes Yes
Tool Movement Manual Automatic Automatic SynodixTool Lifting Manual Automatic Automatic SynodixTool Rotation Manual Automatic Automatic SynodixBase Frame Yes Yes Yes YesDimension/Size (LxWxH)(mm) 2839x2214x1874 2839x2214x1874 2120x1860x2130 2120x1860x2130Rim Diameter with G108A12(MaxClamping) 11”-56” 11”-56” 11”-60” 11”-60”
AUTOMOTIVE EQUIPMENT100
4
2-Post Lift Electro Hydraulic 3.5T with Base TLT235SBA (E)
Benefits :• Safety electromagnetic locking• Dual hydraulic cylinder pistons• Control boxand international standard hydraulic power pack• Force of powder paint finish• Protected and concealed cables and oil pipes• International standard specification• Single motor and transmission to the opposite post by means of a steel
cable
Order No Type Description
LC0000144 TLT 235 SBA(E) Electro Hydraulic Two Post Lift 3.5Ton with Big Base
LIFTING EQUIPMENTLI
FTIN
G E
QU
IPM
ENT
2-Post Lift Electro Hydraulic 4T Clear Floor TLT240SCA
Order No Type Description
LC0000014 TLT 240 SCA Electro Hydraulic Two Post Lift 4T Baseless
Data SpecificationLifting Capacity (Ton) 4Max. Lifting Height (mm) 1950Lifting Time (sec) 50Lowering Time (sec) 40Power Supply (V/ph) AC 380/3Motor Power (kW) 2.2Drive Through Width (mm) 2486Lowest Height (mm) 100Overall Weight (kg) 735Overall Height (mm) 3840Overall Width (mm) 3420Working Noise (db (A)) ≤ 80Working Pressure (MPa) 18
Features :• Dual Hydraulic Cylinder• Finishing with powder coating system• Low noise level and width working area• Safety electromagnetic locking system
Benefits :• Safety electromagnetic locking• Dual hydraulic cylinder pistons• Control boxand international standard hydraulic power pack• Force of powder paint finish• Protected and concealed cables and oil pipes• International standard specification• Single motor and transmission to the opposite post by means of a steel
cable
Features :• Dual Hydraulic Cylinder• Finishing with powder coating system• Low noise level and width working area• Safety electromagnetic locking system
Data SpecificationLifting Capacity (Ton) 3.5Max. Lifting Height (mm) 1950Lifting Time (sec) 50Lowering Time (sec) 40Power Supply (V/ph) AC 380/3Motor Power (kW) 2.2Drive Through Width (mm) 2486Lowest Height (mm) 120Overall Weight (kg) 735Overall Height (mm) 2900Overall Width (mm) 3400Working Noise (dB(A)) ≤80Working Pressure MPa 16
Blue ColourAvailable
Blue ColourAvailable
www.kawanlama.com 101AUTOMOTIVE EQUIPMENT
LIFT
ING
EQ
UIP
MEN
T
LIFTING EQUIPMENTElectro Hydraulic Two Post Lift KPH370.32 and KPH370.42K
Features :• Three - stage short arms for asymmetric lifting of large vehicles. Min. pad height 90mm• Perfect synchronization between carriages regardless of load distribution• Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture• Self-controlled lowering speed• Baseless lift, allows easy access into the working area
• Synchronization cables grant the levelling of the two carriages• Each column features a maintenance-free lifting cylinder• Adjustable height• Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position• Automatic arm locking during lifting and automatic unlocking when the arm reaches the floorself-locking conical design• Very low pad, adjustable height
Order No Type DescriptionRV0000364 KPH370.32 Electro Hydraulic 2 Post Lift 3.2T BaselessRV0000365 KPH370.42K Electro Hydraulic 2 Post Lift 4.2T Baseless
Specification KPH370.32 KPH370.42K
Lifting Capacity (kg) 3200 4200
Max. Lifting Height (mm) 2000 2005
Lifting Time (sec) 50 50
Lowering Time (sec) 40 40
Power Supply (V/ph) AC 380/3 AC 380/3
Motor Power (kW) 2.2 2.2
Drive Through Width (mm) 2300 2420
Lowest Height (mm) 90 95
Overall Weight (kg) 735 735
Overall Height (mm) 4175 4175
Overall Width (mm) 3286 3406
KPH 370.32 KPH 370.42K
AUTOMOTIVE EQUIPMENT102
4
LIFT
ING
EQ
UIP
MEN
TLIFTING EQUIPMENT
Electro Mechanic Two Post Lift KPN250 LIKA and LIKT
Features KPN250LIKA :• High capacity to meet any lifting needs• Model equipped with four long arms ideal to lift long wheel-base vans and easy lifting of cars
Specification KPN250LIKA KPN250LIKT
Lifting Capacity (kg) 5000
Max. Lifting Height (mm) 1980 2030
Lifting Time (sec) 50 50
Lowering Time (sec) 40 40
Power Supply (V/ph) AC 380/3 AC 380/3
Motor Power (kW) (2x) 3,5 3,5
Drive Through Width (mm) 2740 3000
Lowest Height (mm) 120
Overall Weight (kg) 1620 1645
Overall Height (mm) 4950
Overall Width (mm) 3500 4080
Working Pressure (Mpa) 18 18
HEAVY DUTY5000 kg
Extra Long Arms
Features for KPN250LIKT :• High capacity to meet any lifting needs• Model equipped with four extra long three stage arms: ideal to lift long wheel-base vans like Mercedes Sprinter and VW Crafter
Order No Type Description
RV0000366 KPN250LIKA Electro Mechanic 2 Post Lift, 5T Heavy Duty
RV0000367 KPN250LIKT Electro Mechanic 2 Post Lift, 5T Extra Long Arms
www.kawanlama.com 103AUTOMOTIVE EQUIPMENT
LIFT
ING
EQ
UIP
MEN
T
4-Post Lift Hydarulic 4T for Service/for Alignmet TLT440/TLT440W
Features :• Designed based on the international standard, meeting the demand of
the garage and workshop• Driven by hydraulic cylinder in stable lifting and lowering• Offering full-range mechanical safety protection by using the safety
block• Connected by using four steel cables; forced synchronized movement of
the lift in order to effectively prevent the sloping of the vehicles• Equipped with rolling jack, turtable and sideslip, suitable for wheel
alignment (440W)• The minimum lifting height is 170mm• Digital control boxand international standard hydraulic power pack• Cable break protection, safety locking mechanism, overload protection
and over current protection, pipe rupture protection• Force of powder paint finish• Protected and concealed cables and oil pipes• International standard specification
Order No Type Description
LC0000092 TLT 440 W Electro Hydraulic Four Post Lift 4 Ton for Wheel Alignment,
LC0000097 TLT 440 Electro Hydraulic Four Post Lift 4 Ton for Service
LIFTING EQUIPMENT
Data Specification
Lifting Capacity (ton) 4.0
Max. Lifting Height (mm) 1900
Lifting Time (sec) 60
Lowering Time (sec) 20 - 40
Power Supply (V/ph) AC 380/3
Passing Width (mm) 3000
Platform Length (mm) 4555
Platform Width (mm) 500
Overall Width (mm) 3445
Overall Length (mm) 5025
Overall Height (mm) 2172
Lowest Lifting Height 170/220mm(440W)
Weight (kg) 1170
Turntable for wheel alignment
Scissor lifting
Pit Jack for Alignment
AUTOMOTIVE EQUIPMENT104
4
LIFTING EQUIPMENTLI
FTIN
G E
QU
IPM
ENT
Features :• The hydraulic cylinder is located inside the fixed
platform and is thus perfectly protected• High-resistant, galvanised and pre-stretched metal
cables• Large-diameter pulleys with self-lubricating and
maintenance-free bushes• Adjustable platform to accommodate different
vehicle tracks and optimised access to vehicle underside
• Automatic anti-toe trap alarm during final stages of lift descent
• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking
• For service lifting only
Order No Type Description
RV0000011 RAV 4350 Electro Hydraulic Four Post Lift 3.5Tfor Service
Electro Hydraulic Four Post Lift 3.5T for Service
Benefits :• Helpful equipment for car maintenance• Optimized access to vehicle underside• CE approved lift with low voltage control• Automatic mechanical back-up safety device, with
pneumatic release• Easy maintenance
Data SpecificationMotor 3ph.400V;50HZ.;2.6kWNoise Level (dB) 70Max. Height (mm) 1905Min. Height (mm) 150Capacity (kg) 3500Overall Height (mm) 2614Overall Width (mm) 3015Passing Width (mm) 2120Overall Length (nm) 5040
Features :• The hydraulic cylinder is located inside the fixed platform and is thus
perfectly protected• High-resistant, galvanised and pre-stretched metal cables• Large-diameter pulleys with self-lubricating and maintenance-free
bushes• Adjustable platform to accommodate different vehicle tracks and
optimised access to vehicle underside• Automatic anti-toe trap alarm during final stages of lift descent• Mechanical, electrical and hydraulic safety devices in compliance with the
prevailing standard for CE marking• For wheel alignment only
Order No Type Description
RV0000258 RAV 4352Electro Hydraulic Four Post Lift 3.5T
for Wheel Alignment
Data SpecificationMotor 3ph.400V;50HZ.;2.6kWNoise Level (dB) 70Max. Height (mm) 1915Min. Height (mm) 160Capacity (kg) 3500Overall Height (mm) 2614Overall Width (mm) 3165Passing Width (mm) 2270Overall Length ( nm) 5190
Electro Hydraulic Four Post Lift 3.5T for Wheel Alignment
Benefits :• Helpful equipment for car maintenance• Optimized access to vehicle underside• CE approved lift with low voltage control• Automatic mechanical back-up safety device,
with pneumatic release• Easy maintenance
www.kawanlama.com 105AUTOMOTIVE EQUIPMENT
Twin Scissors Lift for Service TLT630A
LIFTING EQUIPMENT
LIFT
ING
EQ
UIP
MEN
T
Specification TLT630ALifting Capacity (Ton) 3.0Max. Lifting Height (mm) 2000Lifting Time (sec) 50Lowering Time (sec) 20Power Supply AC 380V 3phHydraulic Pressure (Mpa) 25Pneumatic Pressure (kg/cm²) 5Synchronization Precision (mm) 40Height Difference (mm) 5Overall Weight (kg) 630Motor (kW) 2.2Platform Size (mm) 1580 x520
Order No. Type DescriptionLC0000145 TLT630A Twin Scissors lift for Service 3TLC0000249 TLT632AF Low Profile Scissor Lift for Service 3.2T
Order No. Type Description
LC0000110 TLT830WHydraulic Double Scissor Lift
for Alignment 3T
Double Scissor Lift for Wheel Alignment TLT830W
Low Profile Scissor Lift for Service TLT632AFOn - Floor Installation
In - Ground Installation
Features :• Advanced design, compact layout, original shape and long lifespan• Hydraulic system keeps both platforms at level position• Mechanical protection device throughout the travel distance provides
safety and simple operations• Height limit system keeps the lift from being damaged• Maintenance-free bearing with auto lubrication offers a long lifespan• Surface-mounted or ditch-mounted installation options
Features :• Hydraulic synchronization system keeps the two platforms levels all the same
time• Height limit mechanism prevents the lift and vehicles from getting damaged• The main cylinder and the cylinder of the secondary scissor are equipped with
safety device that can be unlocked pneumatcally. This guarantees exact wheel alignment measuring and a high degree of safety at the working area
• Integrated sidslip plates that can be locked pneumatically are the basis for the effortless wheel alignment measuring
• Equipped with mechanical turntables for wheel alignment• Manitenance-free bearings with automatic lubrication ensure a long lifespan• Surface-mounted or ditch-mounted installation options
IN GROUND or ON FLOOR
INSTALLATION
Specification TLT632AFLifting Capacity (Ton) 3.0Lifting Height (mm) 1900Lifting Height (Second Stage) (mm) 450Lifting Time (sec) 50Lowering Time (sec) 20Motor (kW) 2.2Power Supply AC 380V/50Hz/3phHydraulic Pressure (Mpa) max. 28Pneumatic Pressure (kg/cm²) 5Synchronization Precision (mm) 40Height Difference (mm) 5Platform Size (mm) 4000 x550Overall Weight (kg) 2050
Specification TLT632AFCapacity (Ton) 3.2 Lifting Height (mm) 2000Minimum Height (mm) 100Motor (kW) 2.2Hydraulic Pressure (Mpa) 28Pneumatic Pressure (kg/cm²) 5Air Pressure (bar) 6 (Minimum)
Platform Size (mm)1460 x610 2060 x610
(with Extension)Power (V/Hz) 380/50Overall Weight (kg) 820Work Noise (db (A)) ≤70Lowering Time (sec) ≥20Lifting Time (sec) ≤60 Synchronization (mm) ≤40Height Difference (mm) ≤8Electrical Control Safety Lock and Lowering
AUTOMOTIVE EQUIPMENT106
4
LIFT
ING
EQ
UIP
MEN
TLIFTING EQUIPMENT
In Ground Electro Hydraulic Scissor Lift RAV 509IF Features :• Capacity 3.5 T• Hydraulic levelling system by means of a patented
synchronisation device assures constantly level lifting platform regardless of weight distribution
• CE approved lift with low voltage controls• No cross rails or torsion bars between lifting platform (for
maximum accessibility in the working area)• The best solution for a rational workshop : - Space saving when lift is all raised - Completely free floor space when lift is fully loweredBenefits :• Helpful equipment for car maintenance• Maximum accessibility in the working area• CE approved lift with low voltage control• Mechanical locking device and pneumatic release, for
maximum safety• Easy maintenance
Order No Type DescriptionRV0000046 RAV 509IF In Ground Electro Hydraulic Scissor Lift 3.5T
Data Specification
Motor Power 2.6kW; 50Hz.; 3Phase
Rise Time (sec) 41Descent Time (sec) 41Noise Level (dB) 70Wide of Platform (mm) 545Length of Platform (mm) 1610Completed with Buzzer Switch for Turning Down Limit WarningMax. Lifting Height (mm) 1825Weight (kg) 815
Data SpecificationMotor Power 2.6kW; 50Hz.; 3PhaseRise Time (sec) 35Descent Time (sec) 30Noise Level (dB) 70Wide of Platform (mm) 610Length of Platform (mm) 1420Length of Platform with Extension(mm) 1950
Completed with Buzzer Switch for Turning Down Limit WarningMax. High Limit (mm) 1900Weight (kg) 735
Features :• Capacity 3.2 T• Hydraulic levelling system by means of a patented synchronisation device
assures constantly level lifting platform regardless of weight distribution• CE approved lift with low voltage controls• No cross rails or torsion bars between lifting platform (for maximum
accessibility in the working area)• The best solution for a rational workshop : - Space saving when lift is all raised - Completely free floor space when lift is fully loweredBenefits :• Helpful equipment for car maintenance• Maximum accessibility in the working area• CE approved lift with low voltage control• Mechanical locking device and pneumatic release, for
maximum safety• Low height platform only 95mm
Low Profile Electro Hydraulic Scissor Lift RAV 520L
Order No Type DescriptionRV0000036 RAV 520L Low Profile Electro Hydraulic Scissor Lift
In - Ground Installation
On - Floor Installation
www.kawanlama.com 107AUTOMOTIVE EQUIPMENT
Features :• The hydraulic cylinder is located inside the fixed platform and is thus
perfectly protected• High-resistant, galvanised and pre-stretched metal cables• Large-diameter pulleys with self-lubricating and maintenance-free
bushes.• Adjustable platform to accommodate different vehicle tracks and
optimised access to vehicle underside• Automatic anti-toe trap alarm during final stages of lift descent• Mechanical, electrical and hydraulic safety devices in compliance with the
prevailing standard for CE marking• For service lifting only
Benefits :• Helpful equipment for car maintenance• Maximum accessibility in the working area• CE approved lift with low voltage control• Mechanical locking device and pneumatic release, for maximum safety• Easy maintenance
Order No Type Description
RV0000259 RAV 635.1/IElectro Hydraulic Scissor Lift 3.5 T for
Service
RV0000260 RAV 635.2/IElectro Hydraulic Scissor Lift 3.5T for
Wheel Alignment
Specification RAV 635.1 RAV 635.2
Motor Power 3ph/400V; 50Hz.; 2.6kWNoise Level (Db) 70Lifting Time (sec) 34 40Lowering Time (sec) 26 31Max. Height (mm) 1850Min. Height (mm) 265Platform Length (mm) 4600Platform Width (mm) 615Total Length (mm) 6110Total Width (mm) 2100Weight (kg) 1450 1700Capacity (kg) 3500
Electro Hydraulic Scissor Lift RAV 635.1/I (Service)
RAV xxxSIVersions with wheel free lift
LIFTING EQUIPMENT
LIFT
ING
EQ
UIP
MEN
T
Features :• The hydraulic cylinder is located inside the fixed platform and is thus
perfectly protected• High-resistant, galvanised and pre-stretched metal cables• Large-diameter pulleys with self-lubricating and maintenance-free
bushes• Adjustable platform to accommodate different vehicle tracks and
optimised access to vehicle underside• Automatic anti-toe trap alarm during final stages of lift descent• Mechanical, electrical and hydraulic safety devices in compliance with
the prevailing standard for CE marking• For wheel alignment only
Benefits :• Helpful equipment for car maintenance• Maximum accessibility in the working area• CE approved lift with low voltage control• Mechanical locking device and pneumatic release, for maximum safety• Easy maintenance
Electro Hydraulic Scissor Lift RAV 635.2/I (Wheel Alignment)
Available from
3 to 6 Tons
Capacity
Available from
3 to 6 Tons
Capacity
RAV xxxIRecessed version(installation in-ground)
RAV xxxSIVersions with wheel free lift
RAV xxxIRecessed version(installation in-ground)
AUTOMOTIVE EQUIPMENT108
4
LIFT
ING
EQ
UIP
MEN
TLIFTING EQUIPMENT
Electro Hydraulic Four Post Lift for Service (Truck)
Features :• Capacity 6.5Tons and 8Tons• For service and maintenance use• Automatic mechanical back-up safety devices with pneumatic release• Mechanical, electrical and hydraulic safety devices in compliance with the CE standard• Hydraulic cylinder perfectly protected inside the fixed platform• High-resistant, galvanised and pre-stretched metal cables• Large-diameter pulleys with self-lubricating and maintenance-free bushes• Adjustable platform to accomodate different vehicle tracks and optimised access to vehicle underside
Specification RAV 4650 RAV 4800Motor Power 3ph/400V; 50Hz.; 2.6kWLifting Time (sec) 75Lowering Time (sec) 60Weight (kg) 1390Total Height (mm) 2560Total Length (mm) 6100 68010Total Width (mm) 3990Platform Length (mm) 5000 5844
Technical data RAV 442E RAV 442NE RAV 440E RAV 440NE
Capacity (kg) 12000 14000 20000 24000
Motor Power 2 x4 kW/3ph/50Hz 4 x4 kW/3ph/50Hz
Weight (kg) 3070 3110 4170 4200
Platform Length (mm) 7992 8000
Platform Width (mm) 700
Lifting Time (sec) 120
Lowering Time (sec) 120
Min. Platform Height (mm) 275
Max. Platform Height (mm) 1850 1610
Total Length (mm) 9074 9100
Total Width (mm) 3852 3690
Total Height (mm) 2202 1950
Passing Width (mm) 3117 3100
Electro Mechanic Four Post Lift for Service (Truck)
Features :• Capacity 12, 14, 20 and 24Tons• For Service and Maintenance use• Two lifting screws in each column• Motor protection by thermal relay is provided to prevent burning out in
case of overloading or lack of one phase• Safety micro-switch in case of main-nut failure.• Mechanical safety stop• Upper and lower limit switches• Automatic lubrication of main and safety nuts and spindles is achieved by
a plunger pump, one in each column, which ensures positive lubrication every time the lift is raised this ensuring long life and smooth running
• Can be twinned; synchronised, therefore with the two lift platforms working at the same height
Order No Type Description
RV0000368 RAV 4650 Electro hydraulic 4 Post Lift f/ Service Trucks 6.5T
RV0000369 RAV 4800 Electro hydraulic 4 Post Lift f/ Service Trucks 8T
Order No Type Description
RV0000370 RAV 442E Electro Mechanic 4 Post Lift f/Service Trucks 12T
RV0000371 RAV 442NE Electro Mechanic 4 Post Lift f/Service Trucks 14T
RV0000372 RAV 440E Electro Mechanic 4 Post Lift f/Service Trucks 20T
RV0000373 RAV 440NE Electro Mechanic 4 Post Lift f/ Service Trucks 24T
Specification RAV 4650 RAV 4800Platform Width (mm) 500 650Passing Width (mm) 3300Noise Level (dB) 75Max. Height (mm) 1950Min. Height (mm) 200Capacity (kg) 6500 8000
www.kawanlama.com 109AUTOMOTIVE EQUIPMENT
LIFT
ING
EQ
UIP
MEN
T
LIFTING EQUIPMENTElectro Hydraulic Scissor Lift for Servive (Truck)
Order No Type DescriptionRV0000378 RAV 709 I Electro-hydraulic Scissorlift 9T, 6000mm RunwayRV0000349 RAV 713 I Electro-hydraulic Scissorlift 13T, 7000mm RunwayRV0000379 RAV 718 I Electro-hydraulic Scissorlift 18T, 8000mm RunwayRV0000380 RAV 725 NI Electro-hydraulic Scissorlift 22.5T, 8000mm RunwayRV0000381 RAV 733 I Electro-hydraulic Scissorlift 33T, 9000mm Runway
Technical Data RAV 709 I RAV 713 I RAV 718 I RAV 725 NI RAV 733 I RAV 745 IHD RAV 745 I RAV 755 I RAV 755 IL
Capacity (kg) 9000 13000 18000 22500 33000 45000 55000
Motor (kw) 3.5 7.3 7.5 9.2
Weight (kg) 5000 5500 5850 5900 6300 9750 9750 10000 12500
H (mm) 1935 2040
I (mm) 1595 1575 1680
L (mm) 100 550 1050 1550 1450 1450 2000
Lifting Time (sec) 60 66
Lowering Time (sec) 56 64
Platform Length (mm) 6000 7000 8000 9000 13000 16200
Platform Width (mm) 880
Total Length (mm) 6200 7200 8200 9200 13200 16400
Total Width (mm) 2810
Noise Level (Db) 70
Features :• Capacity 9, 13, 18, 22.5, 33, 45 and 55 Tons• For Service and Maintenance use• Space saving when lift is raised• Obstacle free floor space when lift is fully lowered• No cross rails or torsion Bars between lifting platforms (for maximum
accessibility in the working area)• Mechanical locking device with automatic engagement and pneumatic
release, ensuring maximum safety when lift is in standing position• Start-up pistons to minimize stress in the early stage of lifting• All pivot points made with self lubricating bushings for long life• Can be twinned; synchronised, therefore with the two lift platforms
working at the same height
Order No Type DescriptionRV0000382 RAV 745 IHD Electro-hydraulic Scissorlift 45T, 9000mm RunwayRV0000383 RAV 745 I Electro-hydraulic Scissorlift 45T, 13000mm RunwayRV0000384 RAV 755 I Electro-hydraulic Scissorlift 55T, 13000mm RunwayRV0000385 RAV 755 IL Electro-hydraulic Scissorlift 55T, 16200mm Runway
AUTOMOTIVE EQUIPMENT110
4
GA
RAG
E EQ
UIP
MEN
T
LIFTING EQUIPMENTElectro Mechanic Mobile Column Lift for Service ( Truck and Bus )
Features :• Capacity 3, 4, 5.5, 6.5, 8.5 and 10 Tons per Column• For service and maintenance use• Moveable column and possibility of setting a different height between pairs of columns while retaining the subsequent control level synchronization• Large and solid base for maximum stability under load• Lifting spindles in rolled steel with bronze main and safety nuts• Mechanical and electrical safety devices comply with European Safety
Regulations• Cut-out of lifting operation in case of wear of main nut• Thermal protection against overload of motors• Emergency stop button with self retainer on all columns
Technical Data RAV 210 RAV 220 RAV 230 RAV 240 RAV 260 RAV 270Capacity per Column (kg) 3000 4000 5500 6500 8500 10000Motor (kW) 3 3.5 4 2.4 3.7 3.7Required Mains ( 230v/50Hz) 6kW-19A 6.5kW-22A 7.5kW-26A 5.5kW-18.5A 6kW-20A 6.5kW-22Apower per Column (400v/50Hz) 6kW-11A 6.5kW-12.5A 7.5kW-15A 5.5kW-10.5A 6kW-11.5A 6kW-12.5AMaster Column Weight (kg) 410 430 450 473 508 650Slave Column Weight (kg) 360 380 400 455 490 630Rise Time 70” 70” 110” 135” 135” 180”Maximum Tyre Diameter (mm) 1.200 1.200 1.200 1.200 1.200 1.200Minimum Tyre Diameter (mm) 900 900 900 900 900 900Minimum Rim Diameter (mm) 580 580 580 580 580 580
Dimensions (mm)
Technical Data RAV 210 RAV 220 RAV 230 RAV 240 RAV 260 RAV 270
A 1100 1160 1110 1145
B 1100 1132
C 1800 1756
D - - - - 195 -
E 122 153 190
F 550 530 525
G 515 455
H 2705 2720 2740
I 390 295 290
L 345 315
M 840
N 576
LIFT
ING
EQ
UIP
MEN
T
www.kawanlama.com 111AUTOMOTIVE EQUIPMENT
EXHAUST EXTRACTOR SYSTEMTrotter - S (Portable Exhaust Extractor)
EXH
AU
ST E
XTRA
CTO
R SY
STEM
Trotter is : Mobile fan with nozzle mounted on adjustable rod for exhaust gas extraction from the working area.
Trotter 100/S
Trotter 150/S
Trotter-100/S1900m3/h 1HP1117c.f.m. 0,75Kw
Trotter-150/S2800m3/h 1,5HP1646c.f.m. 1,15Kw
TRO.100S-TUBO10mt
Ø 150mmTRO.150S-TUBO
10mtØ 150mm
AR (System Spring driven hose reel for exhaust extraction)
Spring driven hose reel for exhaust extraction from motorbikes and small cars. Suitable to be wall or ceiling mounted
Mod A(mm) BØ(mm) CØ(mm) D(mm) E(mm) FØ(mm) G(mm) H(mm) I(mm) L(mm) MØ(mm) kgAR-75/7 600 75 350 600 709 120 639 40 246 10 540 43
AR-75/10 600 75 350 600 709 120 639 40 246 10 540 46
AR-75/7.5D
75mm³ 7,5 mt - 25 ft 200° C - 392° F AFT-75 - -
AR-75/10D
75mm³ 10 mt - 32 ft 200° C - 392° F AFT-75 - -
AR-75/7PB-Comp
75mm³ 7,5 mt - 25 ft 200° C - 392° F AFT-75 BGT-75/140 -
AR-75/10PB-Comp
75mm³ 10 mt - 32 ft 200° C - 392° F AFT-75 BGT-75/140 -
Also Available
for Truck and
Bus Exhauster
AUTOMOTIVE EQUIPMENT112
4
ECOSYS-B-6/1
6mt - 20ft 1 7,5mt - 25ft 200°C - 392°F BGT-100/140 1HP - 0,75kW 3
ECOSYS-B-9/1
9mt - 30ft 1 7,5mt - 25ft 200°C - 392°F BGT-100/140 1HP - 0,75kW 4
ECOSYS-B-12/1
12mt - 40ft 1 7,5mt - 25ft 200°C - 392°F BGT-100/140 1HP - 0,75kW 5
ECOSYS-B-15/1
15mt - 50ft 1 7,5mt - 25ft 200°C - 392°F BGT-100/140 1HP - 0,75kW 6
ECOSYS-B-18/1
18mt - 59ft 1 7,5mt - 25ft 200°C - 392°F BGT-100/140 1HP - 0,75kW 7
ECOSYS-B-21/1
21mt - 69ft 1 7,5mt - 25ft 200°C - 392°F BGT-100/140 1HP - 0,75kW 8
Ecosystem - B (Complete exhaust extraction system with aluminium track ETK and sliding carriages)
ECOSYS-B/1
Complete exhaust extraction system with aluminium track ETK and sliding carriages. Fan and predisposition for sliding fixing point are included.
EXHAUST EXTRACTOR SYSTEMEX
HA
UST
EXT
RACT
OR
SYST
EM
ECOSYS-B-6/1
6mt - 20ft 2 7,5mt - 25ft 200°C - 392°F BGT-100/140 1,5HP - 1,1kW 3
ECOSYS-B-9/1
9mt - 30ft 2 7,5mt - 25ft 200°C - 392°F BGT-100/140 1,5HP - 1,1kW 4
ECOSYS-B-12/1
12mt - 40ft 2 7,5mt - 25ft 200°C - 392°F BGT-100/140 1,5HP - 1,1kW 5
ECOSYS-B-15/1
15mt - 50ft 2 7,5mt - 25ft 200°C - 392°F BGT-100/140 1,5HP - 1,1kW 6
ECOSYS-B-18/1
18mt - 59ft 2 7,5mt - 25ft 200°C - 392°F BGT-100/140 1,5HP - 1,1kW 7
ECOSYS-B-21/1
21mt - 69ft 2 7,5mt - 25ft 200°C - 392°F BGT-100/140 1,5HP - 1,1kW 8
ECOSYS-B/2
Optional :
BL-A CESETK-100/7-Base
Ø100mm-4”
Also Available
ECOSYSTEM-A
and ECOSYSTEM-
www.kawanlama.com 113AUTOMOTIVE EQUIPMENT
BOD
Y RE
PAIR
EQ
UIP
MEN
T
BODY REPAIR EQUIPMENTSpray Booth Double Blower 2 x4kW + 1x5.5kW
Spray Booth Double Blower 2 x4kW + 1x5.5kWData Specification
Outside Dimension (mm) 7000 x5560 x3430Inside Dimension (mm) 6900 x4000 x2800Door Width 3000Intake Capacity (m³/hour) 24000Intake Power (kW) 2x4Type of Inlet Fan Centrifugal FanFirst Filter for Inlet Side EU4Secondary Filter for Inlet Side Ceiling filter (EU-5)Ceiling Frame Material Powder coating steelExhaust Capacity (m³/hour) 15000Exhaust Power (kW) 5.5Type of Exhaust fan Centrifugal Fan
First Filter for Outlet Side EU-3
Secondary Filter for Outlet Side Dry active carbon
Air Dumper on Outlet Side (Manual) Manual
Lighting Power (Upper Light) (W) 40 x36
Lighting Power (R+l Side Lights) (W) 20 x20
Data SpecificationBrand of Lighting Phillips
Main Structure 50 mm (EPS)
Brand of Burner Riello
Model of Riello Burner G20
Heat Exchanger Material SUS 304
Temp Controller and Thermocouple yes
Overpressure Protection yes
Air Valve Actuator yes
Brand of Actuator Bellimo (electrical)
Hourmeter Provided
Timer Provided
Total Power (W) 15340
Order No Type Description
KW1900532 Spray BoothSpray Booth double blower
2x4kW + 1x5.5kW with side lighting
Features :• So thick flame-resistant and heat-preserving board for the body structure
made by sandwiching two sheets of coloured steel and one piece of eps• Automatically paint at constant temperature which is above 18 degree
celsius in winter• Components produces by standards thus easy assembly and durability• Paint with even wind being intake and exhausted ; bake at constant
temperature• Philips light hence as shadow-free environment with a illuminance up to
800lux• Use galvanize steel for body structure and rivet for fixing the filters to
reduce the cost• Heat exchanger of stainless-steel and of scientific design insures it only
takes several minutes to reach the preset temperature• Specially designed ventilator feature large volume and low noise• Anti-over pressure device that can automatically open the personal door
when over pressure is sensed• Italian riello burner
Benefits :• Double blower to make perfect painting• Easy maintenance• Emergency door• High quality material• Side lamp for good lighting in side booth
Commercial Application:Body repair workshop
Also Available
Spray Booth for
Truck and Bus
AUTOMOTIVE EQUIPMENT114
4
BOD
Y RE
PAIR
Order No Type DescriptionLC0000018 TBM-131 Tri-tube Infrared Paint Dryer
BODY REPAIR EQUIPMENTTriple Tube Infrared Paint Dryer TBM-131 Features :
• Short infrared wavelength• Transparent frosted quartz glass• Powerful penetrability for polished paint surfaces• Good adhesion and quick drying
Data Specification
Input Voltage (V) AC 220
Output Power (W)
Semi-Heating 800,
2nd Heating 1600
Max. Heating 2400
Spray DistanceNo Less than 50cm
From Spraying Tube
Spray Duration 15 - 30 Minute
Long arm to Reach Top of Vehicle
Features :• Using special shortwave infrared quartz glass as the heat source which the light wave offers powerful penetrability• Electronic timer (range of 060 minutes are fee to choose) and real-time time digital display function• The equipment can be used to dry automobile resin putty, two component paint and water base coating. It has widely scope of application• Lamp cover adopts stainless steel with shinning mirror-like. Surface, reflective effect good,thermal gather homogeneously• Short drying time to ensure high proficiency and high qualty of painting surface• Bracket is made of metal alloy, strong, beautiful and durable• The casters, it can move freely, trouble free and convenient• Each heater tube has its, own control switch, for free choice off different surface painting
Data SpecificationNo. of Tubes 2Length Tubes (mm) 58Power Output (w) 1600Distance From Panel 45-50
Time 15-30Coverage Area (cm) 100x65
Twin Tube Infrared Paint Dryer TBM-222
Order No Type DescriptionLC0000291 TBM-222 Twin Tube Infrared Paint Dryer
www.kawanlama.com 115AUTOMOTIVE EQUIPMENT
TIFZX-1E
Order No Type DescriptionRR0000170 TIFZX-1E Leak Detector
TIFRX-1A
Order No Type DescriptionRR0000253 TIFRX-1A Leak Detector
Features:Refrigerant Leak Detectors• Microprocessor controlled circuit with Advanced Digital Signal Processing• Detects ALL halogenated refrigerants• Certified to SAE J1627• Variable frequency audible alarm• CE approval• UL classified• Constant power indication• Cordless and portable; operates on two C-cell batteries• 14” (35.5 cm) flexible stainless steel probe with Teflon liner• Carrying case included, optional holster• Optional reference leak source• Six-segment visual leak size indicator• True mechanical pump provides positive airflow through sensing tip• High and low sensitivity levels• One touch reset• Tactile keypad controls
Data SpecificationPower Source 3V DC; 2 “C” Cell Alkaline Batteries
Design Certified by METLaboratories, Inc., to meet SAEJ1627 for R-134a, R-12, and R-22.
Features:• Patent pending Heated Pentode™ sensor technology• Refrigerant specific detection• Detects ALL halogenated refrigerants at levels below 0.1 oz./yr., as low as 0.05 oz./yr. for R-12• Tri-color visual leak size indication• Tactile keypad controls with one touch reset and adjustable sensitivity• True mechanical pump provides instant response and clearing• Sensor failure indication• Carrying case and re-charger included• Ni-MH rechargeable batteries• Revolutionary design• Certified to SAE J1627• Flexible stainless probe (16”)• CE approved
Data Specification
Sensitivity Per SAE J1627 Criteria: 0.5 oz./yr. (14 g/yr.) for R-134a, R-22, and R-12
Ultimate SensitivityLess than 0.1 oz./yr. (3 g/yr.) R-134a, in High Sensitivity; as Low as 0.05 oz./yr. R-12 in low
SensitivityWarm-up Period 20 SecondsOperating Temperature 32° to 122° F (0° to 50° C)Power Supply Ni-Cad Standard; (Ni-MH Optional)Battery Recharge Time 2 Hours, Integral Charge Status IndicatorFailed Sensor Indication All LEDs Flash Red, Pump OffSensor Life 100 to 150 Hours.
Battery Life Standard Ni-Cad Battery Pack - 4 to 5Hours(Optional Ni-MH Battery Pack - 5 to 6Hours.)
Unit Dimensions 10.25”L x2.5” Dia. (26cm Lx6.5cm Dia.)Weight Approximately 16 oz. (452grams)
REFRIGERANT LEAK DETECTOR
AIR
CO
ND
ITIO
NIN
G
EQU
IPM
ENT
FOR
CAR
Order No Type DescriptionRR0000117 16910 Refrigeran Identifier and Purge Air
16910
REFRIGERANT IDENTIFIER
Features : Identifies refrigerant type and purges damag-ing air In addition to dependable refrigerant identification, the ID Plus measures non-con-densable gases (air) in the refrigerant and purg-es them directly from the tank or system• Displays the actual percentage of R-12, R-134a, R-22, and air in the system or tank• Gives you the option of purging air if significant concentration is found• Hydrocarbon alarm sounds if flammable substances are sensed• On-board printer port allows you to connect a printer for a hard copy of testing results
Data Specification
Power source (V) 100- 220
Dimensions (cm) 11” H x9” W x4-1/2” D(27.94x2.86x11.43 )
Weight 1.75lbs. (740 g)
Ultimate Sensitivity Less than 0.25 oz./yr. (7g/yr.)Sensing Tip Life Approx. 20HoursOperating Range 30° to 125° F (0° to 52° C)Battery Life Approx. 30hrs.Duty Cycle ContinuousResponse Time InstantaneousReset Time . One SecondWarm-up Time Approx. 2 secondsUnit Weight 1. lbs. (560grams)
Unit Dimensions 9” x2.25” x2.25”(22.9cm x5.7cm x5.7cm)
Fixed Probe Length 14” (35.5cm)
AUTOMOTIVE EQUIPMENT116
4
AIR
CO
ND
ITIO
NIN
G
EQU
IPM
ENT
FOR
CAR
Order No Type Description
RR0000307 AC-375C Semi Automatic Refrigerant 3R Unit for R134a or R12
Features :Combines simple operation with superior Accuracy.• Automatic recovery/recharge by weight• Automatic vacuum by timeAutomatic Air Purge – Eliminates damaging air
without any monitoring of gauges or opening of valves.
Oil Drain – The display reminds you to drain the system oil captured during recovery. Calibrations
on the container clearly show you how much oil needs to be replaced.
Oil Inject – System prompts user to inject oil before charge. Reservoir provides visual reference on calibratedcontainer.
Electronic Scale – The scale is mounted internally for protection, and has a dampening mechanism that protects against impact shocks such as
movement over rough surfaces. The scale weighs recovered refrigerant and charges by weight for greatest accuracy.
Internal Storage Vessel – Refrigerant is recovered into and charged out of this vessel, which is
Benefits :• The unit maintains 6.80kg of refrigerant in an internal vessel, and signals
when it’s time to change the supply tank• Eliminates damaging air without any monitoring of gauge or opening of
valve• The unit automatically drains system oil captured during recovery and
the display reminds you to empty the bottle• The scale is mounted internally for protection. The scale weights recovered
refrigerant and charges by weight for greatest accuracy
Commercial Application:For air condition workshop.
RECOVERY,RECYCLINGANDRECHARGEAC-375C
Data SpecificationVoltage 220 — 230V 50/60Hz
Refrigerant Container On-Board 30 lbs. (14 kg) Vessel (Source Tank Not included)
Operating Temperature Range 50˚ to 120˚F (11˚ to 49˚C)Recycling Filter-drier 16 cu. in. in-line (262cc)
Refrigerants R-134a or R-1298 Class III, ARI 98 Class IV
Design Pressure High-382 psig; Low-171 psigPump Free Air Displacement 3.0 cfm (85L/m)
Dimensions (cm) 52” H x33” W x20” D(132 x83.8 x50.8)
Weight 232lbs. (105kg)
Features :Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away. Combines simple operation with superior accuracy. The Robinair 34788-I recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed!Automatic Function — With this new option, you can program the unit to recover, vacuum, leak test, charge, and then walk away without having to operate panel valves.Vacuum Leak Test — Will monitor the vacuum level after an evacuation, and inform the technician of a possible leak in the vehicle’s A/C system.Automatic Refrigerant Refill — With this latest advance, you never have to stop in the middle of a job to change refrigerant tanks. The unit maintains a user selectable amount of refrigerant in an internal vessel, and signals when it’s time to change the supply tank, so no monitoring is required.Automatic Air Purge — Eliminates damaging air without any monitoring of gauges or opening of valves.Automatic Oil Drain — The unit automatically drains system oil captured during recovery, and the display reminds you to empty the bottle. Graduations on the container clearly show you how much oil needs to be replaced.Refrigerant Charging — Has never been this easy. Select a charge mode from either the high side, low side, or both. Accuracy features eliminate guesswork!Refrigerant Management Systems—New and improved, system displays refrigerant use and monitors remaining filter life. Prompts appear when 1/3 of filter life remains.Vacuum Function — Defaults to 15 minutes, but is programmable up to 99 minutes. Remaining vacuum time is displayed on the screen.
Benefits :• Make easy keep the capacity referigerant at the internal vessel and the
user always ready to use the unit• Safety to use when over capacity be happens on internal vessel, it’s
automatically to purge the air on the internal vessel• Easy to use, to know how much oil will be waste when recover process be
happens,• Easy and accurate to knowing the weight of referigerant stock in internal
vessel with the electronic scale• Help to monitoring the pressure at the internal vessel, more safety to use.• Good to use on all position with large gauges
34788-I
Order No Type DescriptionRR0000314 34788-I Automatic Refrigerant 3R Unit for R134a
Commercial Application:For air condition workshopand car assembling plant.
Data SpecificationVoltage 220-240V 50/60HzRefrigerant Container On-board 14 kg Vessel (Source Tank Not Included)
Operating Range (11° to 49°C) 50° to 120°FRecycling Filter-drier 43 cu. in. spin-on typeRefrigerants R-134a; 98 Class III, ARI 98 Class IVDesign Pressure High-377 psig; Low-171 psigPump Free Air Displacement (35L/min) 1.5cfm
Dimensions (127cm x86.4cm x58.4cm) 44” H x34” W x23” D
Shipping Weight (106.6kg) 235lbs.
permanently mounted to the electronic scale for continuing reliability.Internal Manifold – Block manifold contains solenoids
that control refrigerant flow for easy operation, also reducing the possibility of leaking connections.Maintenance Prompts • System prompts user to change vacuum pump oil
when needed. • System prompts user to change filter-drier when
needed.Ergonomic Design – The cabinet is easy to maneuver between service bays and position near the vehicle.Gauges – The high and low side gauges are mounted at an angle that’s easy to see.Unit of Measure – Select pounds or kilograms through the menuFeatures that Speed Service :• 142 l/m vacuum pump for fast, thorough pull-down• Heavy-duty compressor pulls from both sides during recovery• Single pass recycling• Oil injector lets you add system oil in seconds
www.kawanlama.com 117AUTOMOTIVE EQUIPMENT
SERV
ICE
AN
D T
UN
E-U
P EQ
UIP
MEN
T
FOUR GAS ANALYZERStargas 898 (Emission Tester for Gasoline Engine)
Features :• LCD displays• Thermal paper printer• Battery connection for measure rpm• OIML class 0• Serial Port (RS-232) connection• Multi display measuring (curve,
histogram, digital number)• Lambda Analysis• Measurement of CO, HC, CO2, O2 and
NOx(optional)• Measurement of opacity (combine
with smoke chamber)
Order No Type DescriptionSX0000004 898 898 OTC Stargas Global Diagnostic
Benefits :• Good view for analyzing • Free maintenance of printer ink • Easy to rpmmeasuring• EURO 2 approved to use• Ready connection to PC
Commercial Application:For Tune-Up Workshop
Description
Measuremanet Range
CO 0 - 15,00 %Vol res 0,001CO² 0 - 20,00 %Vol res 0,01HC 0 - 30000 ppm Val res 1O2 0 - 25,00 %Vol res 0,01
NOx 0 - 5000 ppm Val res 1(option)Lambda 0.5 - 2,000 res 0,001
Revolution Counter0 - 10000 rev./min res 10 With Battery Connection
0 - 20000 rev./min res 10 With Induction Clamp-optional
Measurement Of Test Environment Parameters (Automatically)
-Ambient Pressure (hPa)-Ambient Temperature (˚C)-Ambient Relative Humidity
(%)
750 - 1060-40 -+60
0% - 100%
res.1res1res.1
Thermometer 5-200˚C res.1Pressure Automatic Calibration From 750hPa to 1060hPa
Measurement Gas Induction 10I/m (approx)Flow Control Internal and AutomaticLeak Test AutomaticCondensate Drain Continuous and AutomaticResponse Time <10secWarming Up Time Max.30 secZero Setting Electronic and Automatic
Plug λ it allows (λ : for car with catalic converter):
- Lambda probe analysis (1V/5V) with fficiency automatic calculation
- The simulation to assess the correct functioning of the harness - ECU
Features :• Dual measure unit (Km or %)• Auto detect error message• Multi regulation measuring
system• Induction system for rpm measuring
Order No Type DescriptionSX0000009+10+11 495/ 02 Smokemeter
Benefits :• Flexible to choose of measuring unit• Easy to understand error system• Flexible to following many country
regulation• Easy to use
Commercial Application:For Tune-Up Workshop
Smokemeter (Emission Tester for Diesel Engine)
Description
Measuremanet RangeOpacity 0 to 99,9% Resolution 0.1Opacity 0 to 99,9% Km-1 Resolution 0,01
True Length of Measurement Cell (Mm) 200Revolution Counter (Rpm) 0 to 6000OpticalSensor,OtSensor(Options)EngineTemperature
0 to 9990rpm - Resolution 10rpm5 to 150°C Resolution 1°C
Working Temperature +5 to 40°CMeasurement Cell Temperature - Adjusted 90 to 95°CLight Source High Efficiency LEDExhaust Smoke Temperature Measurement 0 to 600°C Resolution 1°CSmoke Pressure Variation CheckFan Operation CheckAutonatic Zero SettingWarm-up Time Max. 5 MinutesAutomatic Zero SettingPower Supply 12-0-12Volt in Volt acAutomatic Protection Glasses Cleaness CheckStoring Temperature -20°C+60°CSize (mm) 470x230x220Weight (kg) 7.5
AUTOMOTIVE EQUIPMENT118
4
SERV
ICE
AN
D T
UN
E-U
P EQ
UIP
MEN
T ACCESSORIES for MOTORCYCLE GAS ANALYZERThis accessories must be installed together with Stargas 898 or Multigas 488to measure exhaust gas from motorcycle ( gasoline )
Order No Type DescriptionSX0000097 SL01004 Group Filter Oil
Order No Type DescriptionSX0000108 SL51146 Exhaust Terminal Adapter
Automatic Transmission Fluid Exchanger CAT-402
Features :• Automatic Fluid change, replacing incomplete fluid change of the past• Recycling and cleaning of transmission fluid• Electric DC-12V power supply from car battery• Low oil level protection to avoid running with low oil• View glasses on both cans offering easy comparison of the flow• Various connectors adaptable to European, American and Asian Vehicle models• Equal flow to meet the fluid demand in the automatic transmission• Recovering the acceleration performance of the automatic transmission• Reducing the shock, temperature, and fuel consumption of automatic transmission to prolong its
working life
Commercial Application:For service and tune up workshop
Order No Type DescriptionLC0000233 CAT-402 ATF Changer
Data SpecificationPower Supply (V) DC 12(from car battery)Motor Power (W) Electric Pump; 150Screen/Display LEDFluid Hose (in/out) (m) 2Fluid Tank (ℓ) 15x2Equivalent Excharger Error (ml) ±100Maxexchange Speed (ℓ/minute) 2Noise (dB) <70Weight (kg) 45Dimension/Size (mm) 640 x430 x932
ATF CHANGER
www.kawanlama.com 119AUTOMOTIVE EQUIPMENT
SERV
ICE
AND
TUN
E-U
P EQ
UIP
MEN
T
Digital Injector Tester and Ultrasonic Cleaner CNC-601A and CNC-602 AFeatures :• Powerful injector cleaner supported by ultrasonic cleaning• Stable pressure and wide range achieved on all injector types through
micro computer-controlled adjustment• Automatic and real-time monitoring of the major parameters• Draining of demo fluid with a single press on the drain key
Data SpecificationPower AC220V, 50HzInput Power (W) 450Ultrasonic Cleaning Power (W) 100Range of Pressure Adjustment (Mpa) 0-0.65
Length of Pressure Adjustment (Mpa) 0.004
Range of Simulating Test (rpm) 10-9999Step Length of Simulating Test (rpm) 10
Counting Range 1-9999timesTiming Range 1-9999secondsRange of Pulse Width (ms) 0.5-25, step length 0.1Volume (ml) 2500Dimension (mm) 550 x530 x1400Weight (kg) 80
Order No Type DescriptionLC0000012 CNC-601A Injector Cleaner and Tester 6 cylinderLC0000009 CNC-602 A Injector Cleaner and Tester 6 cylinder
INJECTOR CLEANER AND TESTER
Generic Adaptors
CNC-601A
CNC-602 A
UltrasonicCleaning
To improve the performanceof injector
Ultrasonic cleaning
Before cleaning After cleaning
Anti-dust cover Adapter for full-range vehicle models
Functions and Accessory CNC-602A CNC-601AUltrasonic Cleat √ √Uniformity/sprayAbil ity Test
√ √
Leakage Test √ √Injecting Flow Test √ √Auto Test √ √On-vehicle Cleaning X √Structure desk cabinetCylinder 6 6
AdaptorStandard Standard/
On-Vehicle
Bisa untuk Injectortype “sidefeed”
AUTOMOTIVE EQUIPMENT120
4
SERV
ICE
AND
TUN
E-U
P EQ
UIP
MEN
T SCANNERX-431 Master Scanner
Order No Type DescriptionLC0000243 X-431 Master Scanner
Data SpecificationOperating System LINUXMemory (M) 16CF Card (MB) 512Main Unit I/O Universal serial port/ parallel portPower Supply (V/V) DC 12/24Power (W) Approx 9
Screen 240 x320 LCD touch screen withbackground light
Printer Mini high speed thermal printerAmbient Temperature -15°C ~ 50°CRelative Humidity (%) < 90
Features :• Upgrade software via the internet• Compact flash card 512mb• Operating system linux• Internal thermal printer• New design is more stylish and modern• Processor speed is higher, so that process data faster• Smart Boxcomponent integrated with the main unit, so that the internal loading process is shorter• Voltage power range capability up to 24 volts DC• More coverage data vehicles• Built-in CAN BUS adapters
Unique and integrated 16 PIN connector
Faster comminication with cars than X-431
24V operating voltage capability
STANDARD SOFTWARE:
www.kawanlama.com 121AUTOMOTIVE EQUIPMENT
Data SpecificationDisplay (Inch) High Resolution Touch Screen 4,3Power Battery (mAh) 1530Memory Micro SD Memory Card 1 GigaInterfacing USB Connector (Data and Printer)Connector Universal 16 Pin AdaptorData Transfer Cable and Wireless (Bluetooth).
Order No Type DescriptionLC0000242 X-431 Diagun Handheld Scanner
Unique in industry Synchronously diagnose two vehicles
SCANNER
SERV
ICE
AND
TUN
E-U
P EQ
UIP
MEN
T
Features :• Compact Scanner, Main Unit is small, lightweight, and easy to carry• It can read data from two vehicles at once, at the same time (optional)• Data transfer system with wireless communication (Bluetooth)• Easy up to-date software via the internet with a USB cable• Printer connection via USB Connector
STANDARD SOFTWARE:
X-431 Diagun Scanner
AUTOMOTIVE EQUIPMENT122
4
MO
TORC
YCLE
SER
VIC
E EQ
UIP
MEN
T
Motorcycle Lift
MOTORCYCLE SERVICE EQUIPMENT
Motorcycle Scissor Lift Electro-Hydraulic Control Box(KP1396E). Lifting Height 1000 mm.
Order No Type Description
RV0000374 KP1396E Motorcycle Lift 600kg Electro Hydraulic
RV0000375 KP1396P Motorcycle Lift 600kg Air - Hydraulic
Scissors Lift with Air-Hydraulic Pump (KP1396P).Lifting Height 1000 mm.
Features :Tyre changers especially designed to handle motorcycle wheels.
Chuck fitted with fixmounted special clamps to guarantee maximum rigidity during operation.
Motorcycle Tyre Changer
TYRE SERVICE EQUIPMENT
Order No Type DescriptionRV0000386 G7240.18 BIKE Motorcycle Tyre Changer 15”-23”RV0000309 G84A24 Adaptor For Reducing Clamp
Data SpecificationDimension (mm) 1890 x960 x1215Self Centering Lock External 10” - 20”Self Centering Lock Internal 12” - 22.5”Operating Pressure (Bar) 8 – 10 BarMotor 1 ph/220v/0.75kwChuck Rotation Speed (rev/min) 6.7Bead Breaker Pressure (kg) 3000Weight (kg) 196Noise level (db) <70
Motorcycle Wheel Balancer
Features :Electronic computerised wheel balancer with high performances in terms of rapidity and accuracy. Single motor driven launch with automatic stopat the end of the cycle.
Order No Type DescriptionRV0000244 GAR181 Universal Flange F/motorcycle WheelRV0000245 GAR181A1 Distance Gauge Extension
Data SpecificationDimension (mm) 450 x450 x926Rim Diameter 10” - 24”Rim Width 1.5” - 22”Max. Wheel Weight (kg) 65Read-Out Accuracy (g) 1Cycle Time (s) 7Rotation Speed (rpm) < 100Power Supply (V/Hz/ph) 230/50/1ph
* Optional Accessories :
For Balancing Unit can choose G1.111H or G2.116H
www.kawanlama.com 123AUTOMOTIVE EQUIPMENT
TEST
ING
EQ
UIP
MEN
T
TEST LANE
Features :• The Ravaglioli test and diagnosis system for cars and light commercial vehicles with 2.5t maximum individual axle load sets today’s standards for professional operators and test centers• Developed with modularity and user friendliness in mind, this system incorporates latest-generation equipment in conformity with applicable
safety regulations and the laws governing the periodical testing of motor-vehicles in the various countries of the world• The quality standards distinguishing all Ravaglioli products are a guarantee of reliabillity through the years and consequently also a guarantee of the soundness of the investment made
Benefit :The sophisticated management software offers a range of configuration option and is therefore constantly ready to respond to changing user requirements and industry regulations. Thanks to its modular structure, to the fact it can be subsequently expanded and to its numerous interfacing options, configuration possibilities are manifold.
Data RT009 RT011Pc Board Interface Multilayer SMDCPU 200MHz Pentium/AMD KG
Hard Disk (GB) 8.4Color Monitor Svga 15” 21”Infra-red Remote ControlPrinterPower Supply 3ph 220V 50HzWeight (kg) 110 155
Data RT095/095P RT102/102P RT152/152PMax. Test Weight Per Axis 2500Max. Transit Weight Per Axis 4000Max. Braking Force 5000 6000 7500Load Cells Accuracy ±0.1Test Speed 5,2Motors 2x3 2x4 2x5,5Roller Diameter 202Roller Coating (A)Coefficient Of Friction >0.7Power Supply 380V 50Hz 3PhWeight 385/415 390/420
Technical Data
Control Unit
Safety Test Lane for Cars , Vans, and Motorcycles
Data RT085M Data RT085MMax. Test Weight Per Axis 500 Motors 3
Max. Transit Weight Per Axis 500 Roller Diameter 202
Max. Braking Force 3000 Roller Coating (A)
Load Cells Accuracy ±0.1 Coefficient of Friction >0.7
Test Speed 5.2 Power Supply 400V 50Hz 3PhWeight 70
Technical Data (Brake Tester)
Data RT009Pc Board Interface Multilayer SMDCPU 200MHz Pentium/AMD KG
Hard Disk (GB) 8.4Color Monitor SVGA 17”Infra-Red Remote Control OPTPrinter Si/Yes/JaPower Supply 1ph 230V 50-60HzWeight (kg) 110
Control Unit
AUTOMOTIVE EQUIPMENT124
4
Benefits :
• Cost effective test lane for side-slip, shock absorber and brake testing
• Expansion possibility with the modular design system from MAHA
• User-friendly with PC and Windows® application
• PC Network capacity, ASA network capacity
• Numerous manufacturer approvals
Features :
• Safety lane with analog display (incl. imbalance display)
• Fully automatic test procedure via integrated control or manually via remote control
• Safety test lane with communication desk 3000 (without PC Package)
• Fully automatic test procedure with digital data processing via PC. The PC must be supplied extra, EUROSYSTEM software is standard delivery
• Safety test lane with communication desk 3000 (with PC package)
• Fully automatic test procedure with digital data processing via PC. The PC is pre-configured.
• A17” screen, keyboard, color printer and EUROSYSTEM software are standard delivery
TEST LANESafety Test Lane for Cars , Vans, and Motorcycles
Brake Tester IW 2 Euro-Standard RS.No.2
Drive Output of the Motors (kW) 2x3
Test Speed (km/h) 5
Axle Load (kg) 3500
Track Maximum (mm) 2200
Track Minimum (mm) 780
Roller Coating Welded Steel Rollers or Syn-thetic Coating
Running Roller Diameter (mm) 202
Roller Axle Separaton (mm) 400
Roller Set Dimensions (LxWxH) (mm) 2320x680x280
Corrosion Protection Powder paint, color:RAL 5010
Shock Absorber Tester FXT 1 Euro
Axle Load-drive Over (kg) 2500
Test Load Per Axle (kg) 2000
Tracking Width Max. (mm) 2200
Tracking Width Min. (mm) 800
Motor Output (kW) 2x1.1
Exciter Frequency
With 50Hz Nominal Frequency ca.16HzWith 60Hz Nominal Frequency ca.20Hz
Measurement Range max.100mm Stroke
Power Supply 230V/400V, 3 Phase, 50/60Hz
Fuse (A) 16
Floor part dimensions (LxWxH)(mm) 2320x800x280
Side Slip-Tester MINC-Profi
Axle Load (kg) 2000
Measurement Range (m/km) +/-20
Track plate Width (mm) 400
Floor Part Dimension (LxWxH) (mm) 1020x460x80
Communication Desk 3000
Dimensions (HxWxD) (mm) 1400x800x670
Technical Data
TEST
ING
EQ
UIP
MEN
T
www.kawanlama.com 125AUTOMOTIVE EQUIPMENT
DYNAMOMETER
DYN
AM
OM
ETER
Performance and Function Tester for Cars, Trucks and motorcycles
Benefits :• Continuous measurement• Discrete measurement• Load simulation• Elasticity measurement• Speedometer test• Graphics package
Features :• Driving cycles (optional)• Language selection• Motorcycle testing on car roller set (optional)• Expendable for 4WD car testing (optional)• Radio remote control for dynamo meter and
cooling fan
Technical data LPS 3000 car LPS 3000 truck LPS 3000 motorcycleColor Screen 19° diagonalDimensions PC Desk (mm) 600x1850x800Rpm 0-10000Measuring Accuracy +/-2% of Meas.ValuePower Supply (V/Hz) 230/50 400/50 230/50Fuse Protection 16 Amp Time Delay 1) 35 Amp Time Delay 2) 16 Amp Time Delay 1)
Roller sets R100,R100/2 R200,R200/2 R50Wheel Power (kW) 0-260 0-400 0-260Optional 2nd Eddy Current Brake (kW) 0-520 - -Optional Power Brake - 0-660kW/0-25kNSpeed (km/h) 0-260 0-200 0-300Tractive Force (kN) 0-6 0-15 0-6Axle Load (kg) 2500 15000 1500Dimensions (mm) 3345x1100x625 4550x1100x625 1420x1100x625Dead Weight (kg) 1200 2350 3) 450Track Width Min. (mm) 800 820/Geteilt 950 3) -Track Width Max. (mm) 2300 2620/Geteilt 2750 3) -Roller Diameter (mm) 318 318 318Roller Center Distance (mm) 540 4) 565 560Smallest Wheel Diameter (Inch) 12Elevation of Rollers (mm) 45 -Wheel Lifting Bar Pneumatic Hydraulic Pneumatic (optional)
OptionsInterface BoxRpm Counter
Oil Temperature ProbeEmission Temperature Probe
Printer
Hydr.roller Set Adjustment DeviceAdditional Eddy Current Brake
--
-Adjustable Eddy Current Brake -
Hydrr. Load Simulator -Idle Roller Set -
Cooling Fan Model Air 5)
1. 2 brakes : 35amp TD2. Power brake : 63 amp TD3. Split roller set in installation pit: dimensions per roller set 2260x1100x885mm; weight per roller set
1250kg : track width Min./Max. depending on pit width (dimensions given is recommended)
4. Available with roller center distance 500mm if ground clearance to low
AUTOMOTIVE EQUIPMENT126
4
DYNAMOMETERPerformance and Function Tester for Cars
Standard Features And Equipment :• Measures up to hp+, 2000 ft/lbs torque (per drum), and 200 mph• Tests vehicles in either two-wheel or all-wheel drive modes• Above-Ground or Pit installation accessories included• Consists of two Model 224xchassis dynamometers• WinPep 7 Software and Hardware to interface (PC, printer, etc. not included)• Automatic Conditions Measurement (absolute pressure, air temp, humidity)• Ignition wire inductive tachometer pickup leads• Auto Tie Down Package (straps, ratchets and ground hooks)• Wheel Chocks• Air Actuated Brake System• Remote Software and Brake Control Pendant• Installation and operation manuals• One year replacement parts warranty• 24/7 Tech Support
Data SpecificationMaximum Horsepower Hp (Per Drum) 2000Maximum Speed (MPH) 200Maximum Torque (ft/lbs (Per Drum)) 2000Drums 2Wheelbase Minimum (inch) 88Wheelbase Maximum (inch) 140Drum Diameter (inch) 24Drum Width (inch) 81Minimum Axle Width N/AMaximum Axle Width (inch) 81Maximum Axle Weight lbs (per drum) 3000
Features:• In this 224xlc, load tests can be performed including step, sweep and loaded roll on. Closed loop load testing is also available by targeting engine rpm• The torque cell calibration routine takes less than a minute to perform. Each eddy current unit attaches to the roller directly by way of a splined shaft, eliminating issues such as belt slippage or failure while maintaining superior repeatability• This Model 424xcan be configured for above-ground or in-ground installation. Every Model 424xcan be upgraded to Model 424xLC2 with the addition of the eddy current load absorption units
DYN
AM
OM
ETER
MODEL 424x
Accessory/upgrade Model 224x Model 224xLC Model 248x Model 424x Model 424xLC2
Pit Covers ----- -----
Above Ground Kit ----- -----
Wideband Air/Fuel Ratio System
Ez ppm Module
Optical Rpm Pickup
Custom Tuning Packs
Analog Module
Thermocouple AmpMust Be Used with Analog Module
Datalink For Obdii Applica-tions
Awd Attachement Opt* --- ---
Eddy Current Brake Option --- X ---
= Available option --- = Standard equipment X = Not available Opt* = Only available for model 248 pit dynamometers
www.kawanlama.com 127AUTOMOTIVE EQUIPMENT
Model 200i Quick Features :• The Model 200i continues the Dynojet tradition of providing a reliable, repeatable, consistent and easy to use chassis dyno for quick and accurate diagnosing of performance problems• The Model 200i offers an improved operator interface through the use of the integrated control console, new WinPep 7 software and a wider plat form for easy loading and unloading. Shop sales, service work and credibility all benefit with a Dynojet chassis dynamometer
DYN
AM
OM
ETER
Performance and Function Tester for Motorcycles
Model 250i Quick Features :• The dynojet load control system was developed through years of experience with over 3,900 dynamometer installations worldwide• The design is easy to operate and provides the function of steady state load control• Dynojet’s load control system uses the latest in eddy current power absorption technology, which combines with our easy to use software, So any technician can get repeatable, consistent results
DYNAMOMETER
Order No Type Description
D90000001 200i Dynojet Dynamometer for Motorcycle
D90000002 250i Dynojet Dynamometer for Motorcycle
Specifications 200i 250i
Base Length (cm) 79.83” (202.8)Base Width (cm) 42.50” (108.0) 70.71” (179.6)Base Height (cm) 18.10” (45.9)
Drum Diameter (cm) 18” (45.72) per Wheel
Drum Width (cm) 16.37” (41.59)Drum Concentricity (mm) +/- 0.001” (+/-0.025)Maximum Length (cm)(front of Front Wheel to Center of Rear Wheel) 84” (213.4 cm)
WeightDynamometer 1600 lbs (725 kg) (Approx.) 2375 lbs (1077kg) (Approx.)Crated Dynamometer 1700 lbs (771 kg) (Approx.) 2500 lbs (1134kg) (Approx.)MaterialDrum A 106 SteelShaft 2 3/16 Inch 1144 Turned, Ground and Polished SteelFrame 10 Gauge Cold Roll Steel Performance SpecificationsModeled Mass (Standard) 450 lbs (204 kg) (Approx.)Modeled Mass (High-inertia) 650 lbs (295 kg) (Approx.)Maximum Horse Power (hp) 750Maximum Speed (mph) 200Maximum Torque (ft/lbs) 750Temperature Range 32° F to 158° (0°C to 70°C) GeneralCalibration Not required (Factory Callibrated)Inductive Pickup Primary Wire rpm Pickup
Power Requirement 240V/30A/1ph + 380V/30A/3ph + Battery 60A
Remote Switches Remote Software Control HardwareTiming Accuracy +/- 1 MicrosecondsDrum Speed Accuracy +/- 1/100thRPM accuracy +/- 1/10th
MODEL 250i
MODEL 200i
AUTOMOTIVE EQUIPMENT128
4
DYN
AM
OM
ETER
Performance and Function Tester for Motorcycles
DYNAMOMETER
Accessory/Upgrade Model 200i Model 250i
Data-link For Harley-davidson Delphi ECM Application
Air/fuel Ratio Module (Requires Installation or Availability of Shop Air)
Dual Multi-axis Cooling Fan System
Monitor Tray
Air Brake
Eddy Current Load Absorption Unit
---
Power Clamp/Carriage
Torque Cell Package
X
Extended Carriage
Fat Boy Wheel Adapter
Folding Ramp
= Available Option --- = Standard Equipment = Not AvailableX
www.kawanlama.com 129AUTOMOTIVE EQUIPMENT
TIMING LIGHT
ENGI
NE
TUN
E UP
AN
D B
ATTE
RY T
ESTE
R
Timing Light Inductive Xenon
Features :• For use on 12V ignition system• Brilliant blue-white xenon tube can
work even in daylight• 1,000,000 flash capability• Solid-state burnout-proff polarity
with automotive reverse polarity and overload protection
• Sliding clamp-on inductive pick-up for easy and safe hookup
Order No. Type DescriptionKW1900230 KW19-230 Timing Light Inductive Xenon
KW1900231 KW19-231 Timing Light Die Cast Metal
KW1900302 KW19-302 Timing Light Digital w/Volt Tester
Features :• Professional quality tool works with
conventional and distributor lees (DIS) ignition systems
• Heavy chrome plated die cast metal housing with protective rubber nose
•Large LED makes readings easy•Ta c t i l e k e y p a d f o r f u n c t i o n
selection•Works on all 12V gasoline engine
Timing Light Digital With Volt Tester
KW19-230KW19-302
MAINTENANCE BATTERY CHARGER 12V
Specifications:• Input power : 220V and 50Hz• Output power :14.4VDC, 0.9A (for Motorbike) 14.4VDC, 3.2A (for Car)
Features :• Short-circuit protection• Over charging protection• Wrong connect protection
• Detach able heavy duty inductive pick-up clamps and leads for easy operation and replacement
• Bright xenon flash tube provides concentrated light for easy visibility of timing mark
• Functions: Advance : 0-6 Degree BTDC Tach : 200-10000rpm Dwell : 0-99.9% Volt : 0-16V
BATTERY CHARGER
Used only for
petrol engine
KW19-281
BATTERY TESTER
KW19-280
Order No. Type DescriptionKW1900280 KW19-280 Battery Tester 2V/6V/12VKW1900281 KW19-281 Battery Tester w/on-off ButtonKW1900911 KW19-911 Compact Battery Tester 12V DC
KW19-911
Order No. Type Description
KW1900934 KW19-934Maintenance Battery Charger
0.9A/3.2A, 12V
Order No. Type DescriptionKW1900939 KW19-939 Smart Battery Charger 12V - 2A/6A/12A
Specifications :• Input Power : 220V, 50Hz,
400W• 12 Volt Output Socket• 2/6/12 Charge• DC 12V 12A Output• 5 Minutes Quick Charge to
Start12V Output Up to 12Amp
Reverse Connection and
Short Cut Protection
Smart Battery Charger
Features :• Easily operate on all 12V ignition system• Superior performance at all speeds through
8000rpm maximum rating• Bright bulb provides consentrated light for
high visibility of timing mark• Detachable clamp-on inductive pick-up for
easy and safe hookup• Double check light indicates incorrect
hookup and faulty flash• Replacable xenon flash tube
Timing Light Die Cast Metal
KW19-231
Features :• Built-In-micro proccessor control• 3 stages high frequency change• Fault diagnosa and alarm• Fully fault protection• For all lead acid battery• DC 12V output up to 12
Features :• Works on all 12V gasoline engines• High impact ABS housing• Detachable heavy duty inductive pick-up clamps and
leads for easy operation and replacement
Order No. Type Description
KW1900620 KW19-620 Digital Timing Light
INDUCTIVE DIGITAL TIMING LIGHT
AUTOMOTIVE EQUIPMENT130
4
BATT
ERY
CHA
RGER
BATTERY CHARGER
Application :Krisbow battery charger, vehicle starter and charging device can be used by vehicle repair shops. Transporting companies can use it to start vehicle in cold weather. It is also best choice for charging vehicle batteries, fork lifts, electric entertainment equipment.
Battery Charger with Jump Starter- Heavy Duty Type
KW19-356
Battery Charger - Industrial TypeBenefits :Our battery charger, being a rectifying device to convert alternating current into direct current, is to be used specifically by vehicle repair shops, tractor stations, battery charging stations, motor cycle repair shops, factories for the purpose of replenishing electrical power of batteries. The charger can also be employed as a direct current source for small-scaled electrolysis and electroplating porjects.
Order No. Type DescriptionKW1900652 KW19-652 Battery Charger 20A, 12V/24VKW1900653 KW19-653 Battery Charger 30A , 12V/24VKW1900654 KW19-654 Battery Charger 50A, 12V/24VKW1900655 KW19-655 Battery Charger 100A, 12V/24VKW1900656 KW19-656 Battery Charger 150A, 12V/24VKW1900657 KW19-657 Battery Charger 200A, 12V/24V
KW19-652 KW19-654
Order No. Type DescriptionKW1900650 KW19-650 Battery Charger 60A starter 650A 12V/24VKW1900354 KW19-354 Battery Charger 100A starter 1200A 12V/24VKW1900355 KW19-355 Battery Charger 150A starter 1800A 12V/24VKW1900356 KW19-356 Battery Charger 150A starter 2000A 12V/24V
Type KW19-650 KW19-354 KW19-355 KW19-356Input Voltage (V/Hz/Ph) 220/50/1 380/50/2 380/50/3Input Power (kVA) 1.77/15 2.9/28 4.4/43 4.4/48Charging Voltage (V) 12/24 12/24 12/24 12/24Charging Current (A) 60 100 150 150Current (0 volt) (A) 650 1,200 1,800 2,000Current (1 volt) (A) 400 800 1,100 1,400Batteries Start Min./Max. (Ah) 65 ~ 120 100 ~ 180 180 ~ 220 150 ~ 220Batteries Start When Charging (Ah) 150 ~ 240 200 ~ 240 200 ~ 240 240Dimension W xD xH (mm) 480 x350 x740 500 x340 x740 500 x340 x740 520 x340 x790Weight (kg) 42 45 55 72
Orientation Scope (V)12/24 Inside, Small Car
the Assistance Starts and Refreshes
12/24 Inside, Small Car the Assistance Starts and
Refreshes
12/24 Inside, Small Car Starts and Refreshes
Directly
12/24 Large And Heavy Type Car Starts and
Refreshes
Type KW19-652 KW19-653 KW19-654 KW19-655 KW19-656 KW19-657Input Voltage (V/Hz/Ph) 220/50/1Input Power (kVA) 0.6 0.9 1.5 3.0 4.5 6.0Class of Insulation FCharging Voltage (V) 12 ~ 24Charging Current A 5 ~ 20 5 ~ 30 5 ~ 50 5 ~ 100 5 ~ 150 5 ~ 200Weight kg 10 14 20 55 68 85Dimension (L xW xH) mm 340 x220 x260 340 x240 x260 380 x280 x280 500 x300 x730
For KW19-650and 354
KW19-355KW19-650
KW19-354
www.kawanlama.com 131AUTOMOTIVE EQUIPMENT
BATT
ERY
CHA
RGER
AN
DA
UTO
MO
TIV
E TE
STERMostly used on car service, workshop and
many others activities where the battery used as power supply
Compact and easy to operate
BATTERY CHARGER
Petrol Engine Compression Tester KitPRESSURE TESTER KIT
Order No. Type DescriptionKW1900531 KW19-531 Battery Charger 5A-30A, 6V-72V
SpecificationRated Input Voltage (V) 220Frequency (Hz) 50Rated Capacity (kVA) 2.56Class of Insulation FCharging Voltage (V) 6 ~ 72Charging Current (A) 5 ~ 30Weight (kg) 36Dimension (cm) 49 x34 x68
Order No. Type Description
KW1900615 KW19-615 Petrol Engine Compression Tester Kit
KW1900616 KW19-616Petrol Engine Compression Tester Kit
w/ Universal Adaptor
Order No. Type Description
KW1900617 KW19-617 Diesel Engine Compression Tester Kit
Diesel Engine Compression Tester Kit
Radiator Pressure Tester Kit
Order No. Type Description
KW1900618 KW19-618 Radiator and Radiator Cap Pressure Tester Kit
INCLUDING RADIATOR CAP PRESSURE TESTER
Oil Pressure Meter Kit
Features :• Designed to check engine oil pressure in
both cars and trucks. Easy to read dual scale gauge. Complete with 24” (600mm) of oil proof hose with 1/8”NPT
• Also includes 1/4” NPT and 3/8”NPT adaptors
• Dual gauge readings: 0 to 300psi (0 ~ 21 Bar)• Gauge diameter: 2.5”
Order No. Type DescriptionKW1900614 KW19-614 Oil Pressure Meter Kit
Fuel Injection Pressure Tester Kit
Features :• Two sets bearing separator• Pullout the bear with the H-type
beam bolts
Bearing Separator Kit
Order No. Type DescriptionKW1900628 KW19-628 Bearing Separator Kit 2” and 3.5”
Order No. Type Description
KW1900613 KW19-613 Fuel Injection Pressure Tester Kit
Features :• Suitable for Japanese, American and
European cars• It can be hooked up or feed into
system• Comprehensive kit of adaptors and
fittings for most fuel injection system• 3-1/2” gauge with dual scale (psi and Bar),
reading from 0-140psi and 0-10Bar• Hanging hook and protective bumper
specially for gauge• Pressure release valve fitted with long
drain hose allows safe recovery of pressure and fuel
KW19-615
KW19-616
Features for KW19-615:• Adaptive inside: 10 x1, 12 x1.25, 14 x1.25, 18 x1.5• M10 xM18 screw
repair driver• M14 xM18 screw
repair driverFeatures for KW19-616:• Adaptive inside: 10 x1, 12 x1.25, 14 x1.25, 18 x1.5• M10 xM18 screw
repair driver• M14 xM18 screw
repair driver
Features :• Can be applied to all kinds of diesel engine• Pressure gauge : 0 - 1000 psi/ 0 - 70 bar/ 0 - 71 Kgf/cm2• Glow plug adaptor (M10 x 1 x 91mm, M10
x 1 x 119mm, M10 x 1.25 x 135mm, M22 x 1.5 x 118mm, M10 x 1 x 113mm, M10 x 1 x 102mm, M10 x 1 x 83mm, M10 x 1.25 x 64mm, M10 x 1.25 x 47mm), Dial gauge 340mm, Screw adaptor 160mm, Injector adaptor (M24 x 1.5 x 88mm, M22 x 1.5 x 73mm, M24 x 2 x 63mm, M20 x 1.5 x 75mm), H fitting, Bleed valve
Features :• To check the condition of automobile
radiator• Leaking on radiator its easy to be found• The condition of radiator cap can be
checked also with this device• Suitable used for all kind of car radiator
like : Toyota, Honda, Mitsubishi, Suzuki, Isuzu, Mazda, Infinity, Nissan, Peugeot, Ford, Chrysier, Chevrolet, Opel, VW, Jeep, Renault, Audi, BMW, Mercedes-Benz, Volvo, Truck.
• 2 pcs cap adapter (testing the pressure cap).
• “T” shape joint 5/16”, 3/8”, oil hose 5/16”, 3/8”.
AUTOMOTIVE EQUIPMENT132
4
Manual and Air Operated Oil Dispenser
Order No. Type Description
KW1900296 KW19-296 Waste Oil Suction with Bowl
90ℓ
KW1900297 KW19-297 Comb. Oil Suction/Drainer90ℓ
OIL DISPENSERLU
BRIC
ATIO
N D
ISPE
NSE
R
Waste Oil Suction Drain/extractors
KW19-297
Supplied with ( for KW19-293 ) :• Double acting hand operated
pump• Level gauge with metal guard, • 1.8 meters Flexible hose length
with metal spout and shut off valve
Application: Four wheel drive oil,transmision oil, engine oil
Order No. Type DescriptionKW1900293 KW19-293 Manual Oil Dispenser 24ℓKW1900295 KW19-295 Air Operated Oil Dispense 24ℓ
KW19-295
Supplied with ( for KW19-295 ) :• Lever gauge complete with metal guard • Pressure gauge• 1.8m flexible hose• Oil valve with non drip tip
Specification KW19-293Tank (ℓ) 24Capacity (gr/Stroke) 200Hose Lenght (m) 1,80Fitting MetalWeight (kg) 12,0
Specification KW19-295 Air Inlet Connection tires valveAlimentation with Air Pressure GaugeWorking Pressure (Bar) 3-8Tank (ℓ) 24
Delivery tubeDiameter (Inch) 3/4Length (m) 1.8
Fitting MetalWeight (kg) 11
Specification for KW19-297Air Inlet Connection (Venturi for Vacuum) (Inch) 1/4
Venturi Working Pressure (Bar) 8
MaxDepressure (Bar) -0.85
Tank (ℓ) 90
Suction Tube Diameter-length
Diameter (Inch) 1/2
Length (m) 2
Delivery tubeDiameter (Inch) 3/4
Length (m) 2
Collection Bowl with GridAir Inlet Connection (For Pressurize and Deliver) Tires Valve
Alimentation with Air Pressure Gauge (For Pressurize and Deliver)MaxPressure (Bar) 0.5
Weight (kg) 28.5
Features :• Supplied with 90ℓ tanks• Tool try• and Wheel with brake
KW19-296
KW19-293
Specification for KW19-296Air Inlet Vonnection (Venturi for Vacuum) (Inch) 1/4Venturi Working Pressure (Bar) 8MaxFepressure (Bar) -0.85Tank + Pre-Chamber (ℓ) 90 + 8
Suction TubeDiameter (Inch) 1/2
Length (m) 2
Delivery Tube
Diameter (Inch) 3/4
Length (m) 2Air Inlet Connection (For Pressurize and Deliver) Tires ValveAlimentation with Air Pressure Gauge (For Pressurize and Deliver)MaxPressure (Bar) 0.5Weight (kg) 27
www.kawanlama.com 133AUTOMOTIVE EQUIPMENT
Supplied with ( for KW19-295 ) :• Lever gauge complete with metal guard • Pressure gauge• 1.8m flexible hose• Oil valve with non drip tip
Specification for KW19-297Air Inlet Connection (Venturi for Vacuum) (Inch) 1/4
Venturi Working Pressure (Bar) 8
MaxDepressure (Bar) -0.85
Tank (ℓ) 90
Suction Tube Diameter-length
Diameter (Inch) 1/2
Length (m) 2
Delivery tubeDiameter (Inch) 3/4
Length (m) 2
Collection Bowl with GridAir Inlet Connection (For Pressurize and Deliver) Tires Valve
Alimentation with Air Pressure Gauge (For Pressurize and Deliver)MaxPressure (Bar) 0.5
Weight (kg) 28.5
Features for KW19-292 :• High pressure hand operated grease
dispenser for bulk grease, with 14 kg reservoir complete with:• 1,5m hose flexible spout and 4 jaws
grease coupler
Order No. Type DescriptionKW1900292 KW19-292 Manual Grease Dispenser 14kg
GREASE DISPENSERManual Grease Dispenser Air Operated Grease Pump and Dispenser
KW19-294
Swivel Wall Bracket
WALL MOUNTED OIL PUMP KIT
The pressure sprayer must be utilized only to spray liquids with a solvent base or alkalines, as long as they do not contain an acid base. The pressure spray consists of a pneumatic spray nozzle and a tank mounted on casters.
Order No. Type DescriptionKW1900415 KW19-415 Pressure Sprayer 24 ℓ
Specification KW19-415Tank Capacity (ℓ) 24Operating Pressure (bar) Between 3 and 7Fitting for Entry of Air in Tank As tyre valvesWeight (kg) 13.5Length of the Flexible Spraying Tube 1.9
PRESSURE SPRAYER
A = 335mmB = 960mmC = 250mm
OILPUMP,PRE
SSURE
SPR
AYER
,A
ND
GRE
ASE
DIS
PEN
SER
Mounted Oil Pump Kit For 200ℓ DrumIncludes:• 5:1 air operated pump, stub type, 290mm suc-
tion tube• Wall bracket with 42mm adaptor• Suction kit for stub pump• Open hose reel with 10 meters 1/2” hose rate
R1AT• Oil control valve with digital meter and manual
non drip tip • Drip tray• Connecting hose 1/2” x2m• 1/4” air pressure regulator
Order No. Type Description
KW1900514 KW19-514 Wall Mounted Oil Pump Kit for
200ℓ Drums
SpecificationCompression Ratio 5:1Air Inlet Connection φ (Inch) 1/4Oil Outlet Conn φ (Inch) 1/2Working Pressure (bar) 6-8 Air Consumption (ℓ/min) 330Suction Tube Dia. (mm) 42Suction Tube Length (mm) 290
Complete with :• 2 wheel cart• 4 meter hose 1/4” R2AT• Cover dia. 310mm• Follower plate dia. 310mm
Order No. Type Description
KW1900294 KW19-294 Air Operated Grease Pump 20~30kg
*Grease specification maxNLGI grade 3
SpecificationCompression Ratio 60:1Air Inlet Connection φ (Inch) 1/4
Grease Outlet Connection φ (Inch) 3/8
Working Pressure (Bar) 6-8 Noise (db) 79Air Consumption (ℓ/m) 340Suction Tube Dia. (mm) 32Suction Tube Length (mm) 500
AUTOMOTIVE EQUIPMENT134
4
GRE
ASE
DISPE
NSE
R,TES
TER,
AIR
CON
DIT
ION
ING
EQUI
PMEN
T AN
D C
ABLE
Order No. Type DescriptionKW1900373 KW19-373 Brake Fluid Tester
Features : A. Green-color indicator flashes indicates good
brake oil qualityB. Yellow-color indicator flashes indicates bad
brake oil quantityC. Red-color indicator flashes or beeping alarm
indicates brake oil quantity is unsafe to useD. Test buttonE. Reset screwF. Test barG. Test bar headH. Reset indicator (green light)
G
D
E
F
H C
A B
BRAKE FLUID TESTER
Order No. Type DescriptionKW1900533 KW19-533 Vacuum Pump 1/3HPKW1900534 KW19-534 Vacuum Pump 1/2HPKW1900535 KW19-535 Vacuum Pump 3/4HP
Specification KW19-533 KW19-534 KW19-535Frequency (Hz) 50 50 50Flow Rate (ℓ/min) 100 170 226Ultimate Vacuum (Pa) 5 5 5Power (HP) 1/3 1/2 3/4
Inlet Port (Inch)1/4 3/8
1/4 3/8
1/43/8
Oil Capacity (mℓ) 280 320 800
Order No. Type Description
KW1900505 KW19-505 Testing Manifold R134A, 36”/90cmKW1900506 KW19-506 Testing Manifold R22, 36” /90cm
KW19-506
Krisbow testing manifold can be used as equipment for air conditioning services.These manifolds are applicated for R134A, R22 refrigerants.R22 is used mostly in home and building air conditioning. R134A as replacement of R12 uses in automotive air conditioning.
WITH 3pcs CHARGING HOSE
KW19-505
Manifold Gauge
AIR CONDITIONING EQUIPMENT
Features :Air Operated Grease Dispenser for Bulk Grease,with14kgReservoirComplete with :• Grease pump 60:1 - 500mm• 4mt hose R2AT 1/4”• Grease shut-off valve with flexible
spout and 4 jaw coupler
KW19-552
GREASE DISPENSER
Order No. Type Description
KW1900552 KW19-552 Air Operated Grease Dispenser 14kg
SpecificationCompression Ratio 60:1Air Inlet Connection φ (Inch) 1/4 Grease Outlet Connection φ (Inch) 3/8
Working Pressure (Bar) 6-8 Noise (db) 79Air Consumption (ℓ/m) 340Suction Tube φ (mm) 32Suction Tube Length (mm) 500Hose Lenght r2at 1/4” (m) 4
AIR CONDITIONING EQUIPMENTVacuum Pump
CABLE CONNECTION
Features:Power transfer from donor car to flat car• Power transfer via lighter socket with out
lift up the engine bonnet• No installation requested, easy to use • Thermal protect away from over heat• Fuse protect for surge current
Order No. Type Description
KW1900898 KW19-898 Cable Connection 4m, 10A
4m Cable Length
CABLE JUMPER
Accu Recomendation max. 70 Ah Accu Recomendation max. 200 Ah
200ADia. 2.9mm²
200ADia. 16mm²
KW19-888
KW19-889
Order No. Type Description
KW1900888 KW19-888 Cable Jumper 200A, 2.5m, 2.9mm²
KW1900889 KW19-889 Cable Jumper 200A, 3m, 16mm², TUV/GS Standard
www.kawanlama.com 135AUTOMOTIVE EQUIPMENT
AU
TOM
OTI
VE
SERV
ICE
TOO
LA
ND
HYD
RAU
LIC
LIFT
ING
Features:• Rugged welded steel• Convenient removable work
shelf.• Parts basket for snaking small
parts in solvent.• Self-latching fuse linked fire
cover
One piece tank construction with powder coating finish and fitted with fully sealed, magnetic driving pump unit, Fluid recirculated through replaceable filter element and directed onto workpiece through flexible metal delivery nozzle 25 Gallon capacity tank fitted with fusible link hinge which automatically snaps lid shut in the event of a fire. Parts basket for snaking small parts in solvent.
Order No. Type DescriptionKW1900313 KW19-313 Parts Washer 20 GallonKW1900314 KW19-314 Parts Washer 40 Gallon
20Gallon
PARTS WASHER
KW19-313
Available 40Gallon
• 240V/50Hz solvent pump• Recirculates 50 Gallon of solvent
per hour.• Tank capacity: 20 Gallon. • Solvent capacity: 12 Gallon
Timing Gear Puller
Features:• Bolts 5/16”-18x100mm 2pc• Bolts 3/8”-16x100mm 2pc
Order No. Type Description
KW0103453 KW01-3453 Timing Gear Puller, 34.5x27x19.5cm
AUTOMOTIVE SERVICE TOOL
Order No. Type Description
KW1900612 KW19-612 Coil Spring Compressor 440mm
SpecificationCapacity (Ton) 1Max. Working Length (mm) 440Ram travel (mm) 325
Spring size (ø)Inch 4 ~ 61/2
mm 102 ~ 165Weight (kg) 38Package (cm) 123 x29 x17
Features :• 1,000kg capacity power hydraulic unit
with foot operation• Quicker and easier than using ratchet
driven spring compressor• Yokes reduce the risk of spring slippage/
damage• Suitable for spring from 4 ~ 61/2” or Ø102
~ Ø165mm
AUTOMOTIVE SERVICE TOOLS
Order No. Type DescriptionKW1900908 KW19-908 Universal Ball Joint Puller 50mmKW1900909 KW19-909 Ball Joint Separator 19mm
Features KW19-908 :For passenger cars and truck, for removal of ball pivots on tie-rods and stabilizers, max. Capacity up to 50mm by reversing the bottom part, wide clamping range due to infinite variability.
Features KW19-909:• It is good to use for powerfull structure• Stand design to solve the space problem• Jaws open : 19mm
Universal Ball Joint Puller
COIL SPRING COMPRESSOR
Specification KW05-61Capacity (Ton) 4Ram Lowest Order (mm) 330Ram Stroke (mm) 120Weight (kg) 17Dimension (mm) 585 x350 x180
KW05-61
KW05-62
Order No. Type Description
KW0500061 KW05-61 Hydraulic Body Repair Kit 4TonKW0500062 KW05-62 Hydraulic Body Repair Kit 10Ton
Features :portable hydraulic jack set includes: hand pump, hose, cylinder ram, spreader ram, rubber head, rubber faced flat - base, ram toe, plunger toe, wedge head, 900 VBase, serrated saddle,male thread adapter, assorted extension tubes.
Specification KW05-62Capacity (Ton) 10Ram Lowest Order (mm) 470Ram Stroke (mm) 150Weight (kg) 31Dimension (mm) 815 x430 x165
HYDRAULIC BODY REPAIR KIT
AUTOMOTIVE EQUIPMENT136
4
MA
NU
AL
AN
D H
YDRA
ULI
C LI
FTIN
GFRAME STRAIGHTENER
SpecificationCapacity (Ton) 10Weight (kg) 50Dimension (mm) 3060 x475 x310
Order No. Type DescriptionKW0500094 KW05-94 Frame Straightener 10Ton
ENGINE STAND
Capacity625kg
Order No. Type Description
KW0500092 KW05-92 Engine Stand 625kg
Specification
Capacity (kg) 625
Weight (kg) 33.5
Dimension (mm) 870 x195 x220
ENGINE CRANE
Specification
Capacity (Ton) 2
Boom Working Range (mm) 1050 ~ 1590
Lifting Range (mm) 0 ~ 2300
Weight (kg) 60
Dimension (mm) 1620x975x1500
Order No. Type Description
KW0500054 KW05-54 Hydraulic Engine Crane 2Ton
KW05-54
Folds for easy storage
KW05-94
TRANSMISSION JACKFloor Type, Manual Transmission Jack
Order No. Type Description
KW0500759 KW05-759 Transmission Jack 0.5Ton, Floor Type
KW0500760 KW05-760 Transmission Jack 1Ton, Floor Type
KW05-759
Specification KW05-759 KW05-760
Capacity (kg) 500 1000
Length (mm) 750 900
Width (mm) 412.5 492
Min. Height (mm) 215.6 210
Max. Height (mm) 564 775
KW05-760
www.kawanlama.com 137AUTOMOTIVE EQUIPMENT
HYDRAULIC JACK
Order No. Type Description
KW0500039 KW05-39 Hydraulic Jack 2Ton
DescriptionCapacity (Ton) 2
Height Minimum (mm) 125
Maximum (mm) 300
Rise (mm) 175
Weight (kg) 7
Case Dimension(mm) 480 x210 x145
2Ton
Hydraulic Jack 2 Ton
KW05-39
MA
NU
AL
AN
D H
YDRA
ULI
C LI
FTIN
G
Specification KW05-444 KW05-561
Capacity (kg) 500
Min. HT (mm) 1125 830
Max. HT (mm) 1940 1815
Stroke1st stage (mm)
815505
2nd stage (mm) 480
Weight (kg) 38 94
Package Size (mm) 1120 x 245 x 290 560 x 385 x 880
Order No. Type Description
KW0500444 KW05-444 Transmission Jack 500kg (Hydraulic Standing Type)
KW0500561 KW05-561 Transmission Jack 500kg (Pneumatic Hydraulic Standing Type)
Pneumatic
Standing Type, Manual and Pneumatic Transmision Jack- 500kg
KW05-444KW05-561
Order No. Type DescriptionKW0500477 KW05-477 Farm Jack 3 Ton, 33”KW0500478 KW05-478 Farm Jack 3 Ton 48”
KW05-477 KW05-478
FARM JACK
3Ton
TRANSMISSION JACK
3Ton
JACK STAND
Specification KW05-477 KW05-478
Capacity (Ton/kg)6000 60003000 3000
Base Size (Inch) 7 x4-1/2 7 x4-5/8Min. Height (Inch) 4-15/16 4-15/16Max. Height (Inch) 26 40Weight (kg) 13 14 Order No. Type Description
KW0500060 KW05-60 Jack Stand 3Ton (2pcs)
KW0501677 KW05-1667 Jack Stand 6Ton (2pcs)
Specification KW05-60 KW05-1677
Capacity Ton) 3 6
Height:(Min.)(Max.) (mm)
295425
395605
Weight (kg) 3.4 13.2
6Ton
Double safety pin
Large area feet to resist sinking into asphalt
AUTOMOTIVE EQUIPMENT138
4
HYD
RAU
LIC
LIFT
ING
3.5Ton
Features:• Universal joint• Dual return springs• Roller action• Flange body• Oversizes body
Order No. Type Description
KW0500040 KW05-40 Hydraulic Jack 3.5Ton
Specification
Capacity Ton 3.5
Minimum height mm 145-500
Maximum height mm 500
Weight kg 40
Package size mm 725 x355 x210
Foot pedal
BOTTLE JACK
KW05-144 KW05-145
Available
5-50Ton
KW05-142KW05-141KW05-140
Order No Type DescriptionCapacity
(ton)
Height
Min. (mm)
Lifting
Height (mm)
Adjusting
Height (mm)
Weight
(kg)
KW0500140 KW05-140 Hydraulic Bottle Jack - 5Ton 5 216 127 70 4.8
KW0500141 KW05-141 Hydraulic Bottle Jack - 10Ton 10 230 150 80 6.8
KW0500142 KW05-142 Hydraulic Bottle Jack - 20Ton 20 190 85 60 10
KW0500144 KW05-144 Hydraulic Bottle Jack - 30Ton 30 240 130 - 21
KW0500145 KW05-145 Hydraulic Bottle Jack - 50Ton 50 236 120 - 30
KW05-40
Description
Capacity Ton 4
Min. height mm 100
Max. height mm 508
Net weight kg 46.5Gross weight kg 48.5Product dimension mm 745 x349 x180
Package dimension mm 800 x440 x220
Order No. Type Description
KW0500757 KW05-757 Hydraulic Jack 4Ton
4Ton
Hydraulic Jack 4 TonHydraulic Jack 3.5 Ton
KW05-757
Aluminium Body
2 TonSpecification
Capacity Ton 2
Lifting range mm 85 ~ 445
Weight kg 24
Package size mm 740 x340 x220
Order No. Type Description
KW0500325 KW05-325 Aluminium Hydraulic Jack 2 Ton
Aluminium Hydraulic Jack 2 Ton
www.kawanlama.com 139AUTOMOTIVE EQUIPMENT
HYDRAULIC GARAGE JACK
HYD
RAU
LIC
LIFT
ING
KW05-58
KW05-56KW05-55
KW05-57
Order No. Type Description
KW0500055 KW05-55 Hydraulic Garage Jack 2Ton
KW0500056 KW05-56 Hydraulic Garage Jack 3Ton
KW0500057 KW05-57 Hydraulic Garage Jack 5Ton
KW0500058 KW05-58 Hydraulic Garage Jack 10Ton
3Ton
10Ton
5Ton2Ton
Specification KW05-55 KW05-56 KW05-57 KW05-58
Capacity (Ton) 2 3 5 10
HeightMinimum (mm) 140 140 150 160
Maximum (mm) 800 670 560 560
Weight (kg) 58 56 95 145
Case Dimension (mm) 1220x430x200 1400x320x200 1510x380x210 1640x480x260
SpecificationHydraulic Jack
Capacity (Ton) 1.5Product size (mm) 85~445
Net weight (kg) 19.5Gross weight (kg) 20.5Dimension (L xW xH) (mm) 740x340x220
Jack StandCapacity (Ton) 3Lifting range (mm) 293 ~ 405Net weight (kg) 4/PairGross weight (kg) 5/PairDimension (L xW xH) (mm) 250x250x85
Order No. Type Description
KW0500751 KW05-751 Aluminium Hydraulic Jack 1.50 Ton With Jack Stand 3Ton
1.5Ton
Jack Stand
3Ton
Aluminium Hydraulic Jack 1.5Ton With Jack Stand 3Ton
PNEUMATIC HYDRAULIC GARAGE JACK
Order No. Type Description
KW0500488 KW05-488 Pneumatic Hydraulic Garage Jack 22Ton
KW0500489 KW05-489 Pneumatic Hydraulic Garage Jack 44Ton
Specification KW05-488 KW05-489
Capacity (Ton) 22 44
Min. height (mm) 228 235
Max. height (mm) 444 413
Air Input (Psi/(bar)) 120-200/ (8-13)
120-200/ (8-13)
Air Consumption (cfm (ℓ/m)) 7.8 (221) 7.8 (221)
KW05-489KW05-488
AUTOMOTIVE EQUIPMENT140
4
Features :• Perfect for cleaning, servicing• Swivel wheels for easy positioning• Rubber surface with oil drain hole• Operated with hydraulic foot pedal• 4 locking positions
Features :• Hydraulic lifting mechanism• Mechanical safety lock to prevent inadvertent lowering• 2 fixed wheels and 2 castors for extra manoeuvrability• Foot activated pump and realese valve• Ideal item for keeping in the garage to work on your vehicle
Hydraulic Motorcycle Lift Table
MOTORCYCLE LIFTHydraulic Motorcycle and ATV Lift Table
HYD
RAU
LIC
LIFT
ING
Application :• Suitable for use with off road motorbikes(trail), quad bikes (ATV) and trikes
Application :• Hydraulic scissor motorcycle Lift is Ideal for MXDirt Bikes (motocross)
Application:Air Lifts are designed to efficiently lift largetruck, trailers, buses, heavy-duty constructionequipment and agricultural vehicles. Theyfunction on 100% air for dependability andlongevity.
PNEUMATIC END LIFT FOR TRUCK
Specification
Max. Capacity (kg/lbs) 135/ 300
Max. Height (mm) 895
Min. Height (mm) 355
Platform Size (mm) 410x350
Nett Weight (kg) 32
Gross Weight (kg) 35
Order No. Type Description
KW1900953 KW19-953Hydraulic Motorcycle Lift Table 135kg,
Stand TypeOrder No. Type Description
KW1900955 KW19-955Motorcycle and ATV Lift Table 750kg,
Floor Type
Specification
Material ALL Steel
Saddle Min. Height (mm) 447
Saddle Max. Height (mm) 1270
Saddle Length Adjustment (mm) 1029-1670
Weight (kg) 290
Air Supply (bar) 10-12
Order No. Type Description
KW1900952 KW19-952 Pneumatic End Lift 10Ton For Truck
www.kawanlama.com 141AUTOMOTIVE EQUIPMENT
Order No. Type DescriptionKW1900967 KW19-967 Motorcycle Tyre Changer 6”-24”, 750W, 1Ph
Order No. Type Description
KW1900975 KW19-975Motor Cycle Wheel Balancer
10”-24” 200W, 1Ph
Features :• Semi-automatic• 20” large turntable and powerful motor • Suitable for the tyre flatness ratio than 45%• Also can be used for car wheel
Humanization designed mount and demount head special for motorcycle
Clamping: 6”-24”
Turntable suitable for motorcycle, adjustable clamp
Features :• High mechanical principal axis per form the heat treatment processibility to make sure the precision of repeated measure • High accurate and high stable inte grated circuit, self-calibration and diagnosis functions• Also can used for car wheel
• LED numeric display screen• Self-calibration and diagnosis
• Rim size available from 10”-24”
MOTORCYCLE LIFT
Motorcycle Tyre Changer
Motorcycle Wheel Balancer M
OTO
RCYC
LE E
QU
IPM
ENT
KW19-361
800lbs/363KG
1000lbs/454KG
TypeCapacity Min
Height(mm)
Max. Height(mm)
Weight(kg)
Packaging(cm)(kg) (lbs)
KW19-361 363 800 205 780 113 150 x 69 x 25
KW19-362 454 1000 195 780 158.5 210 x 81 x 24
Order No. Type Description
KW1900361 KW19-361 Pneumatic Bikelift 363kg/800lbs
KW1900362 KW19-362 Pneumatic Bikelift 454kg/1000lbsKW19-362
Features for and KW19-362:• Working Press : 110 ~ 120psi• Air Consumption : 9cfm (255ℓ/m)
Bike Lift
SpecificationSemi-automatic Side Swing Arm
Motor Power (kW) 0.75Power Supply (V) 220Max. Wheel Diameter (Inch (mm)) 38 (960)Max. Wheel Width (Inch (mm)) 13” (330)Clamping (inch) 6 ~ 24 Air Supply (bar) 8
Bead Breaker Force (kg) 2500
Noise Level (dB) <75Package Size (mm) 960 x 760 x 880
Weight (kg) 195/171
SpecificationMax. Wheel Weight (kg) 65Motor Power (kW) 0.2Power Supply (V/Hz) 220/50Balancing Accuracy (g) 1Balancing Speed (rpm) <200
Rim Diameter (Inch/mm)10~24
254 ~ 610
Rim Width (Inch/mm)1.5 ~ 2040 ~ 508
Measuring Time (sec) <10Noise Level (dB) <70Operating Temperature Range (°C) -5 ~ 50Carton Size (mm) 915 x 760 x 1230Weight GW/MW (kg) 112/88
Available
for Red Colour
AUTOMOTIVE EQUIPMENT142
4
MOTORCYCLE REPAIR TOOL
No. Description1 Valve Spring Compressor2 Valve Spring Compressor Parts3 Valve Adjust Wrench4 Long Joint Pole5 Magneto Sleeve Wrench 20x24mm6 Magneto Sleeve Wrench 30x32mm7 Magneto Remover8 Magneto Remover9 Magneto Remover
10 Magneto Fixer11 Open Wrench12 Magneto Clamp13 Oil Seal Assembler14 Oil Seal Assembler15 Oil Seal Sleeve16 Display Tool Shelf17 Gear Wheel Clamp18 Gear Wheel Clamp19 Combination Sleeve20 Crankcase Fixing Tool21 Crankcase Fixing Tool22 Assemble Set23 Puller24 Chain Remover25 Valve Pole26 Valve Pole27 Valve Pole28 Valve Pole29 Back Shock Compressor 30 Steel Pan31 Back Shock Fixer32 Back Shock Fixer Parts33 Nut Wrench 30x40mm34 Wrench 39x41mm35 Clutch Spring Compressor36 Nut Wrench37 Display Tool Shelf38 Tool Box
Order No Type Description
KW1900638 KW19-638Special Tools for Honda
Motorcyle (38 pcs)
This special tools are only for Honda motorcycle, for repair and service purposes.
Special Tools For Honda Motorcycle
3716
1
10
9
KW19-638 contains :
3529
4
11
78
32
26
36
28
25
21
23
31
1718
30
2019 22
33 34
38
35
1213 14
15
24 26 27
MO
TORC
YCLE
REP
AIR
TO
OL
www.kawanlama.com 143AUTOMOTIVE EQUIPMENT
34
13
30
1
18
22
35
20
No. Description1 Valve Spring Compressor
2 Valve Spring Compressor Part A
3 Valve Spring Compressor Part B
4 Valve Spring Compressor Part C
5 Valve Adjust Wrench
6 Magneto Remover
7 Crank Assembler
8 Crank Assembler
9 Crank Assembler
10 Hole Punch , Assembler Part A
11 Hole Punch , Assembler Part B
12 Hole Punch , Assembler Part C
13 Clutch Fixer
14 Wrench
15 Wrench
16 Oil Seal Assembler
17 Steel Pan
18 Clutch Fixer
19 Wrench
20 Clutch Spring Compressor
21 Display Tool Shelf
22 Chain Remover
23 Wrench
24 Magneto Assembler
25 Magneto Assembler
26 Pin Punch
27 Pin Punch
28 Puller
29 Piston Remover
30 Oil Seal Remover
31 Puller
32 Puller
33 Rotor Remover
34 Wrench
35 Rotor Remover
36 Nut Puller
37 Puller
38 Display Tool Shelf
39 Tool Box28
24
9
23
17
37
29
31
25
19
33
15
36
39
26
KW19-639 contains :
Order No Type Description
KW1900639 KW19-639Special Tools for Yamaha
Motorcyle (39 pcs)
This special tools are only for Yamaha motorcycle, for repair and service purposes.
42 3
6
7 8
10 11 12 14 16
21
27
5
38
32
MOTORCYCLE REPAIR TOOLSpecial Tools For Yamaha Motorcycle
MO
TORC
YCLE
REP
AIR
TO
OL
AUTOMOTIVE EQUIPMENT144
4
No. Description
1 Valve Spring Compressor
2 Valve Remover Sleeve
3 Remover Sleeve Set
4 Rotor Remover Tool
5 Clutch Spring Compressor
6 Clutch Fixer
7 Display Tool Shelf
8 Valve Adjust Wrench
9 Oil Seal Assembler
10 Fixclamp
11 Timing Chain Remover
12 Bearing Remover
13 Crank Assembler
14 Oil Seal Assembler
15 Display Tool Shelf
16 Crank Assembler
17 Wheel Remover
18 Big Chain Remover
19 Bearing Remover
20 Bearing Remover
21 Bearing Remover
22 Hammer
23 Multi Function Assembler
24 Piston Tools
25 Toolbox
25
1
5
11
10
3
13
4
17
14
18
6
12
19 20 21
16
KW19-640 contains :
Order No Type Description
KW1900640 KW19-640Special Tools for Suzuki
Motorcyle (25pcs)
2
7 15
8
9
22
24
23
This special tools are only for Suzuki motorcycle, for repair and service purposes.
MOTORCYCLE REPAIR TOOLSpecial Tools For Suzuki Motorcycle
MO
TORC
YCLE
REP
AIR
TO
OL
www.kawanlama.com 145AUTOMOTIVE EQUIPMENT
PART WASHER
PART
WASH
ER,S
EATCR
EEPE
RA
ND
HO
SE R
EEL
Features :• Unique drop in frame • eqoxy coated
Benefits :• Allows for ultimate shoulder clearance• Prevent rusting
Order No Type DescriptionSO000001 JCW43A Speciality Multi Adjusatable Creepers
Commercial Applications: Oil, Gas and Mining, Automotive, Aviation, Heavy Industry and Power Generation.
Second stagefiltration
provides furtherpurification byremoving oiland grease
First stage filtrationremoves heavy solids
Dual Filter Washer• Composite dual stage filter provides continuous filtration of solvent• Tubs are constructed of 16 gauge steel and feature an added lip fo strength• Complete with work lamp and flexiblespout (except for PBD34A)
PBD3222A PBC4828 PBD2622A PBC3222A PBC16
Specification PBD3222A PBC4828 PBD2622A PBC3222A PBC16Filtration Dual Dual Dual Dual -Base Drum Square Drum Square -InteriorDimensions,Inches 10H x32W x22D 14Hx48Wx28D 7Hx26Wx17D 10Hx32Wx22D 6Hx15Wx16DFluidRequirements,Gallons 20 20 10 20 5Input Power Requirements 120VAC, 60HzPumpVolume,Gallons/hour 325 325 210 325 210OutputPressure,psi 50OverallDimensions,inches 39Hx36Wx26D 45Hx52Wx32D 34Hx30Wx21D 39Hx36Wx26D 10Hx17Wx23DOpenHeight,inches 63 75 53 63 23Replacement Filter PBD3209 PBD3209 PBD3202 PBD3209 -EuropeanModels,230VAC,50Hz PBDH3222AEUR PBCH4828EUR PBDH2622AEUR PBCH3222AEUR -PBD1751 Parts Tray Included Included - Included -PBA720A Drain Table Optional Optional - Optional -
SEAT CREEPER
Order No Type Description- PBD3222A Part Washer- PBC4828 Part Washer- PBD2622A Part Washer- PBC3222A Part Washer- PBC16 Part Washer
Dual Stage Filter
HOSE REEL
YA730D YA729B
YA730D heavy duty air/water hose reel.• 50’ of 3/8” ID low pressure hose• Adjustable ball stop• 24” connecting hose• High carbon steel retraction spring• Guide arm adjusts to 4 positions
YA729B Hose Reel.• 30’ of 3/8” ID low pressure hose• Adjustable ball stop• 12” connecting hose• Metal construction• Max. pressure 300 psi
Order No Type Description- YA730D Heavy Duty Air/Water Hose Reel- YA729B Hose Reel
AUTOMOTIVE EQUIPMENT146
4
EEBC500 Battery charger plus.• Adaptive: Standard automotive, deep-cycle, AGM and gel cell batteries each require a different charging cycle• Versatile: Charges 6, 12 and 24 Volt batteries with 4, 15 and 60 Amp charging rates• Convenient: GFCI outlets for auxiliary power to lights and other accessories: handy storage compartment for optional battery hand tools• Smart: Fully automatic operation: microprocessor-controlled algorithms optimize the charge cycle without overcharging. Includes manual mode for timed charging• Powerful: 300 Amp engine starting power• Hi-tech: Exclusive flash reprogramming power supply maintains consistent OEM specified voltage• Informative: Digital display: voltage, % of charge and alternator % of performance• Professional: Rugged, streamlined design. Higher working height handle helps relieve stress on lower back• SS3151 product information DVD
BATTERY CHARGER
EEBC 500
SpecificationOutput Currents ADC 60/15/4Output Voltages VDC 6/12/24
Switch Positions 3 switches - 64 Combinations
ContinuousInputCurrent(Max),Amps 14.6CrankAssistInputCurrent(Max),Amps 66.5InputVoltage(Rated),VAC 120CrankAssistRating,ADC 300Crank Assist Duty Cycle 1/36Crank Assist On Time (Seconds) 5Crank Assist Off Time (Seconds) 180BoostRating,Amps 300Dc Lead Type FixedDc Lead Length 7’6”Dc Lead Gauge 4 AWGDc Clamps 500AAcCordLength,Feet 9Ac Cord Gauge 14-3Ammeter NoneVoltmeter DigitalTimer DigitalAc Circuit Breaker Self-ResettingDc Circuit Breaker Self-ResettingRectifier 8 SCRVentilation Fan CooledNo. of Charge Rates 3WheelSize,Inches 10Weight,Lbs. 86DimensionLXwXh,Inches 20.4 x16.5 x30.5Outdoor Use yesPower Supply Cord Included
BATT
ERY
CHA
RGER
and
WIR
E BR
USH
Order No Type Description- EEBC 500 Battery Charger Plus
WIRE BRUSH
Wire Brushes• Ergonomic cushion grip handle designed for maximum comfort and control• Use with both hands to maximize pressure• Heavy 28 gauge stainless gives units maximum strength and durability• Choice of brush width and length allows you to cover a widerange of applicationsApplications:• Ideal for cleaning rusted threads, battery terminals and gaskets• Removes body rust prior to welding on various metal parts• Cleans off caulk and interpanel grinding welds
WBBS2 WBSS2 WBSS3WBSS5 WBSS8
WBSS9 WBSS14
WBSS5CAL
WBSS2BKT WBBS2BKT
Stock No. DescriptionWBBS2 2inch Miniature Brass Wire BrushWBSS2 3inch Stainless Steel Wire BrushWBSS3 5inch Stainless Steel Wire BrushWBSS5 7 3/4inch Stainless Steel Wire BrushWBSS8 8 3/4inch Stainless Steel Wire Brush
WBSS14 6 3/4inch Stainless Steel Wire Brush
WBSET Includes (2) Wbbs2 Miniature Brass Wire Brushes And(1) Wbss2 Miniature Stainless Steel Wire Brush
WBSS5CAL 11 Inch Stainless Steel Wire Brush
WBMSSET Includes (1) WBSS8 Stainless Steel Wire Brush (1) WBSS9 Stainless Steel Wire Brush(1) WBSS14 Stainless Steel Wire Brush And (1) WBSSET Wire Brush Set
WBSS2BKT Includes (25) WBSS2 Stainless Steel Wire BrushesWBBS2BKT Includes (25) WBBS2 Brass Wire Brushes
www.kawanlama.com 147AUTOMOTIVE EQUIPMENT
BATT
ERY
TEST
ER
The battery system testers use conductance technology to quickly provide the technician with the stateof health of the battery, the starting system and the charging system. Select from 4 models for a good,better, best line up. One unit has a built in printer and another uses a wireless infra red printer. Someinclude on-screen commands in up to 7 languages.
BATTERY TESTER
Electronic Battery Testers
Specification EECS500 YA2636 YA2624CCA Range 100-1,400 100-3,500 390-1,700Testing Method Conductance Conductance ConductanceDisplays Battery % Available Capacity CCA % and CCA %Displays Battery Condition • • •Tests Discharged Batteries • • •Displays Battery State of Charge • • •Tests 12V Batteries • • •Test 6V and 12V Batteries • • •Tests Flooded/AGM/Gel Cell Batteries • • •Battery Recharge Indicator • • •Reverse Polarity Protection Protect And Detect • •Detects and Displays Bad Cell • • •Surface Charge Warning • • Displays VoltsTests 12V Starter/Charging Systems Displays Volts • Displays VoltsTests 12/24/36V Starter/Charging Sytems - • Displays VoltsInternal Lead Set Diagnostics • - -Detects Alternator Ripple - • -Temperature Compensation • • -Loose Lead Detection • • -InternationalUnitConversionEN,JIS,EIC,DIN • • -Tests Parallel and Series (24V) Battery Packs - • -Printer Capable Infrared Internal Printer IR Printer -Store Test Data For Review And Print Out • • -English,Spanish,FrenchLanguages 7 Languages • -Custom Header With Date And Time • • -Display 2 Line 16 Character 16 Character LCD 4 Digit LEDCableLength,inches(mm) 36 (914.4) 48 (1,219.2) 48 (1,219.2)Parasitic Drain Function - • •Retention Magnet • • •Product Information DVD SS3152 - -
EECS500 YA2636 YA2624
YA2636-4 Infrared USB Adaptor.• Use to store and print YA2636 test results to a PC or laptop• Custom software on CD included with kitHHGA-5 Infrared Printer.• Infrared printer for YA2636 testerHHGA-18 Replacement Paper Roll.• 4 pack of replacement rolls for HHGA-5 infrared printerEECS500-1 Replacement Paper Roll.• Paper rolls for EECS500 printer
YA2636-4 HHGA-5
AUTOMOTIVE EQUIPMENT148
4
BK6000 Video/Still Recording Digital Borescope.• Records and plays back still images and video clips• 3 1/2” inch display offers large viewing screen and2xdigital zoom• Removable, rechargeable Lithium-ion battery pack• Can operate BK6000 while charging the battery• Easy-to-use, multi-language interface• Mini USB connector for uploading images and video• External SDHC card slot• Control handle disengages to allow greater maneuverability• Audio input jack for recording comments with optional ear budand microphone attachment
BK6000/BK5500 Applications:• Ideal for engine, A/C, under dash, suspension andtransmission work• Inspect cylinder bores and valves through the spark plug hole• Examine for gear wear in differentials and manual transmissions• View inside door and body panels to check for malfunctions,defects and hidden damage• Inspect under dash for electrical routing, HVAC actuatoroperation and radio code verification• Locate fluid leaks without a direct line of sight
VIDEOSCOPE
VID
EOSC
OPE
BK5500 Video Inspection Scope.• Single on/off button and battery indicator• Convenient thumb control for LED light intensity• 2 3/8” color LCD provides a larger viewing image thaneyepiece borescopes
BK6000/BK5500 Shared Features.• 8.5mm diameter imager head fits into most spark plug holes• High intensity LEDs direct light where it is needed• 36” long obedient shaft for added reach• 3/4” shaft bend radius for great flexibility• 320 x240 display resolution• 720 x480 imager resolution when using the video-out port to anexternal monitor• Close focus range from 1/2” to 12”• Quick-change connector enables use of optional length,specialized purpose imagers• Integrated stand and hanger for flexible positioning
Stock No. Description Included withBK5500
Included withBK6000
Accessory forBK5500
Accessory forBK6000
BK5500-1 36” Imager (8.5mm Head) • - - -BK5500-2 Mirror and Magnet • • - -BK5500-6 Blow Molded Case • - - -BK5500-7 72” Imager (8.5mm Head) - - • •BK5500-8 Video Out Cable • - - -BK5500-9 120” Imager (8.5mm Head) - - • •
BK5500-10 36” Blue Light/UV Imager (8.5mm Head) - - • •BK5500-12 Dual Imager (Mm Head) - - • •BK5500-13 36” View Imager (5.5mm Head) - - • •BK5500-14 Digital Video Recorder - - • -BK6000-1 Battery, Lithium Ion - • - -BK6000-2 S-Hook - • - -BK6000-6 Blow Molded Case - • - -
BK6000-10 Battery Charger - • - -BK6000-11 Earbud and Microphone - - - •BK6000-12 USB Cable - • - -BK6000-13 Kick Stand - • - -
- (4) Aa Batteries • - - -- Warranty 2 Years 2 Years - -- Instruction Manual • • - -
BK6000
BK5500
BK5500-7 BK5500-9 BK5500-10 BK5500-12 BK5500-14BK5500-13
www.kawanlama.com 149AUTOMOTIVE EQUIPMENT
FLA
SHLI
GH
T
FLASHLIGHT
Engineered with the professional in mind, INOVA T-Series has designed with 3-way tactical end-position switch. It’s a compact high performance, palm sized LED flashlight, and small enough to fit in a uniform pocket but powerful enough to shoot a beam up to far-reaching 200-300 feet (depend on the type). It’s also equipped with optical system that provides thermal management while harnessing and projecting a powerfully bright uniform focused spot and flood beam.
Features:• Patented precision optical system, Provides thermal management while
harnessing and projecting a powerful beam• Electronically controlled, Advanced electronic circuitry provides uniform
light output• Lifetime LED, High-powered, energy-efficient LEDs• Aerospace-Grade Aluminium body, Machined from solid Bar stock (not
extruded tubing) with military spec, Type III hard coat anodized finish• Impact-Resistant, Stainless-steel head protects optical system• O-Rings, Compression sealed throughout, and threads are anodized for
reliability• Batteries, Lithium batteries with a 10 year shelf life included• Construction, shockproof, crush proof and water resistant• Tactical Switch, The tactical end-cap activates momentary
Features:• Patented precision optical system, provides thermal management while harnessing and projecting a powerful beam• Electronically controlled, advanced electronic circuitry provides uniform light output• Aerospace grade aluminium body, machined from solid bar stock (not extruded tubing) with high grade anodized finish• Double-sided ar coated glass lens, optical window has teflon seal to withstand environmental pressure• Aggressive knurling, provides a positive, non-slip grip for sure handling• O-rings, compression sealed throughout, and threads are anodized for reliability• Batteries, lithium batteries with a 10 year shelf life included• Construction, shockproof, crushproof and water resistant• Tactical switch, the tactical end-cap activates momentary on, constant on/off and lockout mode
Inova T-Series
XO3-WT LED Flashlight
Order No Type DescriptionIV0000015 T1WB-MP White LED Black CaseIV0000016 T2WB-MP White LED Black CaseIV0000017 T3WB-MP White LED Black Case
IV0000010 X03-WT Spotlight Titanium Body White LED 123A Lithiun Batt
XO3
Specification T1 T2 T3 X03
Length (mm) 4.56’’/115.824 5.5’’/139.7 6.2’’/157.48 6.0”/152.4
Diameter (mm) 1’’/25.41.1’’/27.94 (Front) 1.24’’/31.496 (Front) 1.24’’/31.496 (Front)
0.865’’/21.971 (Rear) 1’’/2.54 (Rear) 1’’/2.54 (Rear)
Weight (oz) 3.99 4.13 6.17 5.57
LED Rating 4.8Watt 4.8Watt 6.0Watt 5.8watt
Battery Type 2-123A Lithium 2-123A Lithium 3-123A Lithium 2-123A Lithium
Run Time Up to 5hrs Up to 4hrs Up to 3.5hrs Up to 2.5hrs
Effective Range 200Feet 250Feet 300Feet 250Feet
Signal Visibility 2Miles 2.5Miles 3Miles 3Miles
T1
The Inova T1 fits conveniently in a uniform shirt pocket, but that is by no means its only at-tribute. Constructed of strong aerospace grade aluminium, this palm size LED flashlight shoots a powerful beam up to a far reaching 200 feet. Engineered with the professional in mind, the T1 has a patented, end position, tactical switch to enhance overhand operation, and a handy lanyard hole for added transport options. The ideal size flashlight under any circumstances.
T2
The dark presents difficult challenges for those who protect and serve. The Inova T2 is equipped with a patented precision optical system that brightly illuminates objects up to 250 feet away. This best in class LED flashlight is ruggedly built to withstand extra hard use and environmental forces that lesser flashlights cannot. No matter what the measure, the T2 stands alone in materials, design, engineering, manufacturing and performance. A confidence inspiring tool to carry on duty every-where.
Among the tools professionals count on most is a flashlight. The Inova T3 LED flashlight pro-vides the strategic balance of durability, com-pact size and powerful light performance they are looking for. By incorporating advanced technology and high quality materials, the T3 is capable of projecting a highly intense beam of light up to 300 feet. Easy to store, carry and handle, it is an invaluable asset for those who must face threatening situations.
T3
The Inova XO3 is the choice of the world’s most elite covert operations teams. Precision engineered for protection against the elements and ex-treme use, it offers visibly superior light projection and rock solid reliability. Whether on critical missions in far off lands, or back roads touring in a motor home, the XO3 offers a steady stream of far reaching and intense light to blaze the way.
Conversion Table
Weightgrain gram kilogram lbs ounce pound ton
1 0.0647 0.000064 0.000142 0.002 0.000142 6.48
15.432 1 0.000999 0.002 0.035 0.002 10
15432 999.976 1 2.20 35.27 2.20 0.00099
7000 453.592 0.453 1 16 1 0.00045
437.5 28.349 0.028 0.062 1 0.062 0.00003
7000 453.592 0.453 1 16 1 0.00045
15432358 1000000 1000 2205 35274 2205 1
Length
cm feet inch km league league (nautical) metre mile milimetre yard
1 0.03280 0.394 0.00001 0.000002 0.000001 0.01 0.000006 10 0.010936
30.48 1 12 0.00030 0.000063 0.000054 0.304 0.000189 304.8 0.33
2.54 0.083 1 0.00002 0.000005 0.000004 0.025 0.000015 25.4 0.027
100000 3281 39370 1 0.020 0.179 1000 0.621371 1000000 1094
482804 15840 190080 4.828 1 0.868 4828 3 4828040 5280
555600 18228 218740 5.55 1.15 1 5556 3.452 5556000 6076
100 3.280 39.37 0.001 0.000207 0.000179 1 0.000621 1000 1.1
160934 5280 63360 1.609 0.33 0.29 1609 1 1609340 2.7777
0.1 0.003 0.040 0.000001 2.07 1.8 0.001 6.21 1 0.001
91.44 3 36 0.00091 0.000189 0.000164 0.9144 0.000568 914.4 1
cm3 m3 liter inch3 foot3 yard3 gallon (UK) Drum (metric,petroleum) Barrel (UK)
1 0.000001 0.001 0.061 0.000035 0.000001 0.000219 0.000005 0.000006
1000000 1 1000 61024 35.3 1.30 220 5 6.11
1000 0.001 1 61.024 0.035 0.001 0.219 0.005 0.006
16 0.000016 0.016 1 0.000565 0.000020 0.003 0.00008 0.00009
28317 0.028 28.3 1728 1 0.037 6.2 0.141 0.17
764555 0.764 764.5 46656 27 1 168 4 4.6
4546 0.0045 4.5 277.4 0.160 0.005 1 0.022 0.027
200000 0.2 200 12205 7 0.26 44 1 1.22
163659.24 0.16 164 9987 5.78 0.21 36 0.8 1
Volume
Degree celcius
Degree fahrenheit
Degree rankine
Degree reaumur Kelvin
1 33.8 493.47 0.8 274.15
-17.22 1 460.674 -13.776 256
-272.60 -458.68 1 -218.08 0.55
1.25 34.25 494 1 274.4
-272.15 -457.87 1.8 -217.72 1
Temperature
Horsepower (electric) kiloWatt Watt
1 0.75 746
1.34 1 999.64
0.001340 0.000746 1
Power
Horsepower kW Horsepower kW
1.341022 0.7457 8.046132 4.4742
2.682044 1.4914 9.387154 5.2199
4.023066 2.2371 10.728176 5.9656
5.364088 2.9828 12.069198 6.7113
6.705110 3.7285
Power