1 20080825 ki 2600 series power meters feb 2012
TRANSCRIPT
![Page 1: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/1.jpg)
1
20080825
KI 2600 Series Power KI 2600 Series Power MetersMeters
www.kingfisherfiber.comwww.kingfisherfiber.com
Feb 2012
![Page 2: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/2.jpg)
2
Course ContentsCourse Contents
1. General Features -32. Keypad -43. Operation -54. Menu System -115. Modes of operation -14
6. Select Display Measurement unit -22
7. Memory Operation -298. Other Features -319. Instrument care -38
![Page 3: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/3.jpg)
1./ General 1./ General FeaturesFeatures
Autotest
Calibrated at multiple wavelengths Industry standard connector
adaptors Large high contrast LCD display
Power - Battery or micro USB Memory – Internal or USB Time date stamp Text ID Test tone detection
3
![Page 4: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/4.jpg)
4
2./ Keypad2./ Keypad
Toggle Centre
[F1-F4]
Store
On/Off
Backlight
USB port for memory stick
External Power& Computer
interface
Remove Connecto
r
Memory, Text ID, Date
[F1-F4]
Connector Cover
Lanyard holder
![Page 5: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/5.jpg)
5
3./ Operation3./ Operation
1. Select / determine test cord
configuration
2. Fit adaptor
3. Fit batteries
4. Turn On
5. Menu System
![Page 6: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/6.jpg)
6
Identify fibre type required for test cord and configuration required.
Supplied with :- SC connector as standard
3.1 / Select test cord 3.1 / Select test cord connectorconnector
Unlike sources, power meters accept both PC and APC connectors.
![Page 7: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/7.jpg)
F1 F2 F3 F4
7
To fit / change an adaptor / connectorTo fit / change an adaptor / connector
• Locate quick release button on front of instrument at base of connector housing
• Lightly push and hold latch button in• Pull out existing adaptor• Release latch button.• Fit new adaptor.
Slot to outside
![Page 8: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/8.jpg)
3.2 / Fit Batteries3.2 / Fit Batteries
Unclip Battery compartment cover at rear of instrument Note: battery +Ve terminal spring orientation
Instrument time setting holds for approx 7 seconds during change over.
Alkaline battery run time approx 1,000 hours
8
![Page 9: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/9.jpg)
9
To enable rechargeable batteries to be internally charged this feature must be enabled by means of an 0.1” pitch shorting pin.
Alkaline Battery configurationsInstrument supplied in this
configuration.
Rechargeable Battery configuration
Battery type Battery type configurationconfiguration
or
![Page 10: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/10.jpg)
F1 F2 F3 F4
Perm
Memory Meter
10
3.3 / Turn On3.3 / Turn On
To turn On / Off: Push the Green [On/Off]
button
• 10 minutes auto off• Permanent operation• Low battery indicator
To Defeat auto time out. Press [On/Off] & hold for 3 seconds.
Instrument will beep twice. ‘Perm’ will display on the upper RHS of the
LCD.
![Page 11: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/11.jpg)
4./ Menu System4./ Menu System
Top level Menu
11
Memory Meter
![Page 12: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/12.jpg)
4.1/ Memory Menu4.1/ Memory Menu
Return to Top Level Menu
12
Memory
Home ModeMemory
SelectdBm, dBr, Watt
Read Memory
![Page 13: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/13.jpg)
4.2/ Meter Menu4.2/ Meter Menu
13
Return to Top Level Menu
Meter
Home MeterMode HoldSet Ref
SelectdBm, dBr, Watt
In dBr mode,Set 0 dBr
Hold the display
![Page 14: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/14.jpg)
5./ Modes of Operation5./ Modes of Operation
1) Autotest: automatically toggles between all wavelengths Preferred mode for loss testing as testing time is greatly reduced. Minimises error as meter always displays correct wavelength.
2) Manual: Single wavelength operation Preferred mode for level monitoring.
3) Test Tone: Displays incoming modulation frequency
4) Slow Mode: Displays power level in the presence of test tone or low level modulation
4) KITS software: Under software control
14
![Page 15: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/15.jpg)
5.1 / 5.1 / AutotestAutotest
When receiving light from a compliant source operating in Autotest mode,
the meter will auto toggle between wavelengths.
Power meter receives data which contains wavelength, source serial number and nominal source output power.
If power meter not calibrated at an incoming wavelength it will ignore it but remain in sync with other wavelengths.
If incoming power level too low at a particular wavelength it will ignore it but remain in sync with other wavelengths.
Simplest mode for loss testing
15
![Page 16: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/16.jpg)
Autotest DisplayAutotest Display
When receiving light from a source operating in Autotest mode:
Screen displays up to 3 wavelengths at a time. Screen toggles if more than 3 wavelengths being received
16
nm dBm
dBm
dBm
AutoPerm
nm
nm
Home Set RefAutoHoldMode
Meter
![Page 17: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/17.jpg)
5.2 / Manual Mode5.2 / Manual Mode
To enter Meter modePress [F3], Meter
17
F1 F2 F3 F4
Home Set RefAutoHoldMode
Meter
dBm
Perm
nm
F1 F2 F3 F4
Perm
Memory Meter
![Page 18: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/18.jpg)
F1 F2 F3 F4
Home Set RefAutoHoldMode
Meter
dBm
Perm
nm
Select WavelengthSelect Wavelength
To select wavelengthToggle [-] & [+].
Note: Wavelength toggle is not circular Most meters have the common
wavelengths grouped together for speed of access when used in manual mode. E.g. 850, 1300, 1310, 1550, 1625 nm are together
18
![Page 19: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/19.jpg)
Hz
When receiving test tone or low level modulation Power meter displays modulated frequency and beepsTo measure power in the presence of tone, SlowMode is used.
To defeat Beeping:-At Turn-On hold [F2].
19
5.3 / Test Tone5.3 / Test Tone
Hz
Hz
Hz
![Page 20: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/20.jpg)
5.4/ SlowMode5.4/ SlowMode
20
SlowMode:Used when it is necessary to measure power in the presence of test tone or low level modulation e.g. low data rate SCADA transmissions.•When active, the meters sample interval is increased.•The symbol ” ” is displayed when active.In the presence of Test Tone:•To activate, Press [F4]•To turn Off, Press and hold [F3] (Meter Mode) & then press [F4].
In normal Mode:•To activate, Press and hold [F3] (Meter Mode) & then press [F4].•To turn Off, Press and hold [F3] (Meter Mode) & then press [F4].
Hz
Perm
dBm
Perm
nm
Home Set Ref HoldModeMeter
SCADA:supervisory control and data acquisition
![Page 21: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/21.jpg)
5.5 / KITS control5.5 / KITS control
• Click results directly into workbook
• Standards based & user definable analysis
• Data Logging• Memory extract to KITS or CSV
file
• Familiar Excel™ User Interface • Inbuilt multi language support• Customisable reports
21
Direct Interface to - KITS™ Testing & Reporting softwareDirect Interface to - KITS™ Testing & Reporting softwareInstrument under computer controlInstrument under computer control
![Page 22: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/22.jpg)
22
6./ Select Display Measurement 6./ Select Display Measurement unitunit
Absolute Mode:Measure actual power level at a particular location in decibels – dBm
Relative Mode:Measure power level ‘relative’ to a particular location in decibels – dBr
Linear Mode:Measure power level at a particular location in watts - W
Absolute dBm / Relative dBr mode / Linear W mode
![Page 23: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/23.jpg)
F1 F2 F3 F4
Home Set RefAutoHoldMode
Meter
dBm
Perm
nm
Toggle Absolute/Relative/Linear
Repeated pressing of Meter Mode button [F3] , toggles through Absolute – dBm, Relative - dBr and Linear - W modes.
23
dBmnm
dB Rnm
uWnm
![Page 24: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/24.jpg)
6.1 / Set Reference
If not in dBr mode, press [F3], Meter Mode as required to enter dBr mode.•Press and hold [F2] Set Ref for approx 2 seconds.
• Meter will beep 4 times and zero
24
F1 F2 F3 F4
nm dBm
dBm
dBm
AutoPerm
nm
nm
Home Set RefAutoHoldMode
Meter
F1 F2 F3 F4
nm dBm
dBm
dBm
AutoPerm
nm
nm
Home Set RefAutoHoldMode
Meter
![Page 25: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/25.jpg)
25
Source MeterCabling under test
-6.99 dBm2x 10-2 mW
-47.71 dBm1.67x10-5 mW
0 dBr
-40.72 dBrLoss = Send – Receive dB
=> Loss = (-6.99) – (-47.71) = 40.72 dB
![Page 26: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/26.jpg)
7./ Memory Operation7./ Memory Operation
1) Memory clear
2) Memory store
3) Memory recall
4) Dump to USB memory
26
![Page 27: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/27.jpg)
F1 F2 F3 F4
dB R
dB R
dB R
AutoPerm
HomeMemory
Mode
mem
nm
nm
nm
7.1/ Memory Clear
To clear Memory:• Press and hold [Toggle Centre] then press [On/Off]• ‘CLr’ will be displayed for a few seconds.
• Stored Text ID Tags are not cleared by this procedure.
27
If not in Memory mode, Press [F2] , Memory
1
2
F1 F2 F3 F4
Permmem
HomeMemory
Mode
![Page 28: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/28.jpg)
28
To Store:• Press [], Store• Instrument will beep and Memory increment• Stored Memory location displayed whilst button depressed.
To save to to a specific Memory location:• Toggle [-] & [+] to desired memory.• Press and hold [F2], Memory for 3 seconds.
• Instrument will beep once new location is set.• Future Memory saves continue from this location.
7.2/ Memory Store
F1 F2 F3 F4
Permmem
HomeMemory
Mode
![Page 29: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/29.jpg)
F1 F2 F3 F4
uW
uW
uW
AutoPermmem
HomeMemory
Mode
nm
nm
nm
dB R
dB R
dB R
AutoPerm
HomeMemory
Mode
mem
nm
nm
nm
F1 F2 F3 F4
7.3/ Memory Recall
If not in Memory mode, Press [F2] , Memory• To view Memory, press [F4]
• To toggle between dBm, dBr and W, press [F3]• For data stored in Autotest mode, ‘auto’
displays • To toggle memory press [-] or [+] • To exit memory mode, press [F1] , Home
29
F1 F2 F3 F4
nm dBm
dBm
dBm
AutoPerm
nm
nm
Home ModeMemory
mem
Toggling stored data metrics
![Page 30: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/30.jpg)
dBm
dBmnm
nm
Home ModeMemory
memUSB
F1 F2 F3 F4
7.4/ Dump to USB memory
Must be in Memory mode to detect USB memory stick.To enter Memory Mode:• Press [F2], Memory.or• Press [F1], Home, then press [F2], Memory.
30
Insert USB memory stick.• ‘USB’ will show on the LCD• If not in Memory mode, Press [F2] , Memory
•Press [] to start Memory dump.• ‘WAIT’ will display whilst USB memory configured.• A buzzer will sound during memory dump.• Do not remove USB stick until ‘USB’ has stopped
flashing. Memory Image from KI2X00 SN: 202 Time in 24h format. Wavelengths in nm. Optical Power values in dBm.
Mem Date Time Type ID_Tag RemSN Wl1 Pwr1 Ref1 Nom1 Wl2 Pwr2 Ref2 Nom21 7/02/32 11:57 Meter AAAA022 0 1610 -19.36 -19.362 7/02/32 12:44 2WlAuto AAAA023 11216 1310 -18.88 0.3 -7 1550 -19.33 0.4 -73 7/02/32 12:44 2WlAuto AAAA024 11216 1310 -18.88 0.3 -7 1550 -19.33 0.4 -74 7/02/32 12:44 2WlAuto AAAA025 11216 1310 -18.88 0.3 -7 1550 -19.33 0.4 -7
![Page 31: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/31.jpg)
8./ Other features8./ Other features
1) Set date/Time2) Min-Max Recording3) Cable text ID
31
![Page 32: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/32.jpg)
F1 F2 F3 F4
HomeMemory
Mode
8.1/ Set Date-Time
Turn On instrument while holding down [Toggle Centre]• To modify the selected time/date, press [-] or [+]To select next/last time and date item: • Press [Toggle Centre] or [F3] , Mode, next item will flash.• To Save & Exit, press [F2] , Memory.• To exit without saving, press [F1] , Home.
32
Loss of Power.•If batteries are removed for longer than about 20 seconds, Date-Time settings are lost
Date Time setting order is:-Hour -> Minute ->Month -> Date -> Year
![Page 33: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/33.jpg)
8.2/ Min – Max recording
Max/Min display mode:• Maximum & Minimum power meter values are continuously
recorded.• Function disabled in Autotest.
To activate / Hide:• Press [-] and [+] simultaneously.
To Reset:• Change wavelength.• Set Reference.• Power Off/On.
33
dBmmin
dBm
dBmmax
Perm
nm
Home Set Ref HoldModeMeter
F1 F2 F3 F4
Auto
Home Set Ref HoldModeMeter
dBmnm
F1 F2 F3 F4
Perm
![Page 34: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/34.jpg)
8.3/ Cable/ Text ID tag
34
Text ID:Used in conjunction with Memory save to identify a location or a cable.•Max 20 individual text ID tags•Format is 4 Alphanumeric letters, followed by 3 digits•The last 3 digits Auto increment.
• e.g. CLEM 062, CLEM 063 etc etc.
nm dBm
dBm
dBm
AutoPerm
nm
nm
Home Set Ref HoldModeMeter Auto
![Page 35: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/35.jpg)
nmdBmnm
F1 F2 F3 F4
Home ModeMemory
Create Text / Location ID
If not in meter mode, press [F3], Meter.• Press [Toggle centre] , then [F4]
• A new ID tag AAAA 001 will display, the active character will flash.
• Toggle [-] and [+] to select an alphanumeric character.• Press [Toggle centre] to select.
• To Save & Exit, press [F2] , Memory.• To exit without saving, press [F1] , Home.
35
12
![Page 36: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/36.jpg)
F1 F2 F3 F4
nm
Home ModeMemory
Using Text / Location IDs
If not in meter mode, press [F3], Meter.• Press [Toggle centre] , Text/Location ID tag will
flash.• Press [-] or [+] to select.
• To Save & Exit, press [F2] , Memory.• To exit without saving, press [F1] , Home.
36
F1 F2 F3 F4
nm
Home ModeMemory
![Page 37: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/37.jpg)
If not in meter mode, press [F3], Meter.• Press [Toggle centre]• Press [-] or [+] to select stored ID to be deleted.• Press [F3], then [F4] ,
• Location ID replaced by a row of flashing dots/dashes.
• To confirm deletion, press F2, Memory.• To exit without changing press F1, Home.
37
Delete Text / Location ID
dBm
Perm
nm
Home HoldModeMemory
dBm
Perm
nm
Home HoldModeMemory
![Page 38: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/38.jpg)
38
9./ Instrument Care9./ Instrument Care
Keep the instrument in a carry case during storage and transport • Use only high quality batteries.
• For prolonged storage remove batteries. • The instrument is resistant to normal dust and moisture, however it is not
waterproof. • If moisture gets into the instrument, remove batteries & dry it out carefully
before using it again.
• Where possible, keep instrument away from strong sunlight.
• Clean the instrument case using Iso-Propyl-Alcohol (IPA) or other non solvent cleaning agents.
• DO NOT use Acetone or other active solvents.
![Page 39: 1 20080825 KI 2600 Series Power Meters Feb 2012](https://reader034.vdocuments.net/reader034/viewer/2022051316/56649c7b5503460f9492f058/html5/thumbnails/39.jpg)
Application NotesApplication Notes
Comprehensive selection available at
www.kingfisher.com.au/ApplicationNotes.htm&
www.kingfisherfibre.com/ApplicationNotes.htm
39