1 modular programming with functions turgay korkmaz office: sb 4.01.13 phone: (210) 458-7346 fax:...
TRANSCRIPT
1
Modular Programming With Functions
Turgay Korkmaz
Office: SB 4.01.13 Phone: (210) 458-7346
Fax: (210) 458-4437 e-mail: [email protected]
web: www.cs.utsa.edu/~korkmaz
CS 2073Computer Programming
w/Eng. Applications Ch 4
2
Lecture++;
Name Addr Content
Lecture 16
3
4.1 Modularity
How do you solve a big/complex problem?
Divide it into small tasks and solve each task. Then combine these solutions.
Divide and Conquer
4
Structure Chart
4.1 Modularity (cont’d)
In C we use functions also referred to as modules to perform specific tasks that we determined in our solution
Shows how the program separated into tasks and which tasks reference other tasks.
NOTE: It does NOT indicate the sequence of steps in the program!
5
Advantages of using modules
Modules can be written and tested separately
Modules can be reused Large projects can be developed in parallel Reduces length of program, making it
more readable Promotes the concept of abstraction
A module hides details of a task We just need to know what this module does We don’t need to know how it does it
6
4.2 Programmer Defined Functions
Every C program starts with main()function Additional functions are called or invoked when
the program encounters function names Functions could be
Pre-defined library functions (e.g., printf, sin, tan) or Programmer-defined functions (e.g., my_printf, area)
Functions Perform a specific task May take arguments May return a single value to the calling function May change the value of the function arguments (call
by reference)
7
Function definition
return_type function_name (parameters){ declarations; statements;}
int my_add_func(int a, int b)
{
int sum;
sum = a + b;
return sum;
}
8
Function Prototype describes how a function is called
int my_add_func(int a, int b); Function Call
result = my_add_func(5, X); Function implementation
int my_add_func(int a, int b){
…}
Programmer-Defined Functions Terminology
Function parametersFormal parametersActual parameterFormal parameters must match with actual parameters in order, number and data type.If the type is not the same, type conversion will be applied (coercion of arguments). But this might cause some errors (doubleint) so you need to be careful!
9
Example: Pre-defined Functions
So far, we used several pre-defined functions!#include <stdio.h>#include <math.h>int main(void){ double angle; printf(“Input angle in radians: \n“); scanf(“%lf”, &angle); printf(“The sine of the angle is %f\n“, sin(angle) ); return 0;}
double sin(double radian);
double sin(double radian){/* details of computing sin */}
10
Example: Programmer-defined Functions
#include <stdio.h>
int main(void){ double x1,y1,x2,y2, dist; printf(“Enter x1 y1 x2 y2 :”); scanf(“%lf %lf %lf %lf”,
&x1,&y1,&x2,&y2); dist = sqrt(pow((x2-x1),2)
+ pow((y2-y1),2)); printf(“Distance is %lf\n”,
dist); return 0;}
#include <stdio.h>double distance(double x1,y1,x2,y2);int main(void){ double x1,y1,x2,y2, dist; printf(“Enter x1 y1 x2 y2 :”); scanf(“%lf %lf %lf %lf”,
&x1,&y1,&x2,&y2); dist = distance(x1,y1,x2,y2);
printf(“Distance is %lf\n”, dist); return 0;}double distance(double x1,y1,x2,y2){ return sqrt(pow((x2-x1),2) + pow((y2-y1),2));}
Exercise
Suppose you are given the coordinate points of a triangle as shown above, write a program that can find the length of each edge…
User enters: (x1, y1), (x2, y2), and (x3, y3)
11
(-3,5)
(4,-1)
(6,8)
12
Value Returning Functions
Function returns a single value to the calling program
Function definition declares the type of value to be returned
A return expression; statement is required in the function definition
The value returned by a function can be assigned to a variable, printed, or used in an expression
13
Void Functions
A void function may be called to perform a particular task (clear the
screen) modify data perform input and output
A void function does not return a value to the calling program
A return; statement can be used to exit from function without returning any value
14
Exercise: void function Write a program to
generate the following output?
***************
for (i=1; i<=5; i++) { for (j=1; j<=i; j++) printf(“*”); printf(“\n”);}
#include <stdio.h>void print_i_star(int i);main(){ int i; for (i=1; i<=5; i++) { print_i_star( i ); }} void print_i_star(int i){ int j; for (j=1; j<=i; j++) printf(“*”); printf(“\n”); return;}
15
Example: value returning function
int fact(int n){ int factres = 1; while(n>1) {
factres = factres*n;n--;
} return(factres);}
n!=n*(n-1)*…*1, 0! = 1 by definition
Return TypeFunction name
Parameter Declarations
Declarations
Statements
16
Example – use fact()
#include <stdio.h>int fact(int n); /* prototype */
int main(void){ int t= 5,s; s = fact(t) + fact(t+1);
printf(“result is %d\n”, s); return 0;}
t = 5
s = ?
Function call
17
Example – execution of factorial function (cont’d)
int fact(int n){ int factres = 1; while(n>1) {
factres = factres*n;n--;
} return(factres);}
t = 5
s = ?
n = 5
factres = 1
fact( 5 )
18
Example – execution of factorial function (cont’d)
int fact(int n){ int factres = 1; while(n>1) {
factres = factres*n;n--;
} return(factres);}
t = 5
s = ?
n = 5 4 3 2 1
factres = 1 5 20 60 120
19
Example – execution of factorial function (cont’d)
#include <stdio.h>int fact(int n); /* prototype */
int main(void){ int t= 5,s; s = 120 + fact(t+1);
printf(“result is %d\n”, s); return 0;}
t = 5
s = ?
Function call
20
Example – execution of factorial function (cont’d)
int fact(int n){ int factres = 1; while(n>1) {
factres = factres*n;n--;
} return(factres);}
t = 5
s = ?
n = 6
factres = 1
t+1
fact( 6 )
21
Example – execution of factorial function (cont’d)
int fact(int n){ int factres = 1; while(n>1) {
factres = factres*n;n--;
} return(factres);}
t = 5
s = ?
n = 6 5 4 3 2 1
factres = 1 6 30 120 360 720
22
Example – execution of factorial function (cont’d)
#include <stdio.h>int fact(int n); /* prototype */
int main(void){ int t= 5,s; s = 120 + 720;
printf(“result is %d\n”, s); return 0;}
t = 5
s = 840
result is 840
23
Example – reuse of factorial function
Write a statement to compute
Enter X, Z, K, D…y=(fact(X)+fact(Z)*5)/(fact(K)-fact(D));
!!
5!*!
DK
ZXy
24
Example – reuse of factorial function in another function
Write a select function that takes n and k and computes “n choose k” where
int select(int n, int k)
{
return fact(n)/(fact(n-k)*fact(k));
}
!)!(
!
kkn
n
k
n
25
Lecture++;
Name Addr Content
Lecture 17
26
Function Examples
27
Exercise Write a function to compute maximum
and minimum of two numbers
int max(int a, int b){ if (a > b) return a; else return b;}
int min(int a, int b){ if (a < b) return a; else return b;}
28
Exercise Are following calls to max function valid? What will be the result?
int max(int a, int b);int min(int a, int b);int main(){int x = 2, y = 3, z = 7, temp;temp = max(x,y);temp = max(4,6);temp = max(4,4+3*2);temp = max(x,max(y,z));
}
29
Example for void function
void print_date(int mo, int day, int year)
{
/*output formatted date */
printf(“%i/%i/%i\n”, mo, day, year );
return;
}
30
Exercise
Write a function that takes score as parameter and computes and returns letter grade based on the scale below.
80-100 A
60-79 B40-59 C0-39 D
31
Solutionchar get_letter_grade(int score){ char grade; if ((score >= 80) && (score <=100)) grade = 'A'; else if ((score >= 60) && (score <= 79)) grade = 'B'; else if ((score >= 40) && (score <= 59)) grade = 'C'; else if ((score >= 0) && (score <= 39)) grade = 'D'; return grade;}
32
Exercise
Write a function to compute logba
double log_any_base(double a, double b){ return log(a)/log(b);}
b
aab
10
10
log
loglog
33
Exercise: Trace functions What is the output of the following program
Output
Out1 = 2Out2 = 4Out3 = 3
#include <stdio.h>int function1(int x){ x = 2; printf("Out1 = %d\n",x); return(x+1);}int main(){ int x = 4, y; y = function1(x); printf("Out2 = %d\n",x); printf("Out3 = %d\n",y); return 0;}
34
Exercise What is the output of the following program
#include <stdio.h>
void function2(){ printf("In function 2\n");}
void function1(){ function2(); printf("In function 1\n");}
void function3(){ printf("In function 3\n"); function2();}
int main(){ function1(); function3(); return 0;}
Output
In function 2In function 1In function 3In function 2
35
Parameter Passing
Call by value formal parameter receives the value of the
actual parameter function can NOT change the value of the
actual parameter (arrays are an exception) Call by reference
actual parameters are pointers (ch 5 and 6) function can change the value of the actual
parameter
36
Scope of a function or variable
Scope refers to the portion of the program in which It is valid to reference the function or variable The function or variable is visible or accessible
#include <stdio.h>int fact(int n); /* prototype */int main(void){ int t= 5,s; s = fact(t) + fact(t+1); printf(“result is %d\n”, s); return 0;}
int fact(int n){ int factres = 1; while(n>1) {
factres = factres*n;n--;
} return(factres);}
t = 5
s = ?
n = 5
factres = 1
37
Scope of a function or variable
Same variable name can be used in different functions
#include <stdio.h>int fact(int n); /* prototype */int main(void){ int t= 5,s; s = fact(t) + fact(t+1); printf(“result is %d\n”, s); return 0;}
int fact(int t){ int s = 1; while(t>1) {
s = s*t;t--;
} return(s);}
t = 5
s = ?
t = 5
s = 1
38
Scope Local scope
a local variable is defined within a function or a block and can be accessed only within the function or block that defines it
Global scope a global variable is defined outside the
main function and can be accessed by any function within the program file.
39
Global vs Local Variable#include <stdio.h>int z = 2;void function1(){ int a = 4; printf("Z = %d\n",z); z = z+a;}
int main(){ int a = 3; z = z + a; function1(); printf("Z = %d\n",z); z = z+a; return 0;}
Output
Z = 5Z = 9
z=2 5 9 12
a=4
a=3
40
Storage Class - 4 typesStorage class refers to the lifetime of a variable automatic - key word auto - default for local variables
Memory set aside for local variables is not reserved when the block in which the local variable was defined is exited.
external - key word extern - used for global variables Memory is reserved for a global variable throughout the
execution life of the program. static - key word static
Requests that memory for a local variable be reserved throughout the execution life of the program. The static storage class does not affect the scope of the variable.
register - key word register Requests that a variable should be placed in a high speed
memory register.
41
Skip
Study section 4.3 from the textbook
42
Lecture++;
Name Addr Content
Lecture 18
43
4.4 Random Numbers
What is a random number? Tossing a coin (0, 1) Rolling a die (1, 2,…6) Min, Max, Avg, possible outcomes are
equally likely or not, Engineering problems require use of
random numbers How can you compute the area of an
irregular shape?
44
Uniform Random numbers All outcomes are equally likely For example fair die, where each outcome
has the same probability of 1/6, So we can generate uniform random
numbers between 1 and 6 by rolling a die. What if we need random numbers in
another range? For example, 1 and 100?
45
Uniform Random numbers (cont’d)
In Standard C library, we have a function rand() to generate random numbers between 0 and RAND_MAX
RAND_MAX is a system dependent constant (e.g., 32,767) defined in stdlib.h
What will be the output of the followingprintf(“%d %d %d\n”,rand(), rand(), rand());
What will be the output, if we re-run the same program?
46
Pseudo-random Numbers Computers generate random
numbers using a seed number and an algorithm.
So, if you give the same seed, you will always get the same sequence of pseudo-random numbers
In Standard C library, we have a function srand(int seed) to give a new seed number
47
Example: generate 10 RNs#include <stdio.h>#include <stdlib.h>
int main(void){ /* Declare variables. */ unsigned int seed; int k;
/* Get seed value from the user. */ printf("Enter a positive integer seed value: \n"); scanf("%u",&seed); srand(seed); /* Generate and print ten random numbers. */ printf("Random Numbers: \n"); for (k=1; k<=10; k++) printf("%i ",rand()); printf("\n"); /* Exit program. */ return 0;}
48
RNs in a specified range [a b]
Generate a RN between 0 and 7 x = rand() % 8; Generate a RN between 10 and 17 x = 10 + rand() % 8;
int rand_int(int a,int b){ return rand()%(b-a+1) + a;}
49
Floating-Point RNs in a specified range [a b]
x = rand() / RAND_MAX will give a random number between 0.0 and 1.0
x = rand() / RAND_MAX *(b-a) will give a RN between 0.0 and b-a
The value is then shifted into range [a b] by adding adouble rand_float(double a,double b)
{ return ((double)rand()/RAND_MAX)*(b-a)+a;}
50
Example: HiLo Game/* Write a program that allows a user to play HiLo game. User wins if he/she can guess the number between 1-100 within at most 6 iterations */#include <stdio.h>#include <stdlib.h>
int rand_int(int a,int b); /* prototype */void playHiLo( int s);
int main(void){ unsigned int seed; /* Declare variables */ int secret; printf("Enter a positive integer seed value: \n"); scanf("%u",&seed); srand(seed);
while(1){ secret = rand_int(1,100); playHiLo(secret); } return 0;}
51
int rand_int(int a,int b){ return rand()%(b-a+1) + a;}
void playHiLo(int s){ int i, guess;
for(i=1; i <=6; i++){ printf("Enter your guess : "); scanf("%d", &guess); if (guess > s) printf("It is Higher than secret\n"); else if (guess < s) printf("It is Lower than secret\n"); else { printf("Cong! you won\n"); return; } } printf("Sorry! Try again\n"); return;}
52
Exercise: Another “guess the number game” Computer selects a random number s between
[1000 9999] User tries to guess it by entering g Computer tells how many digits are in place, out
of place, not in secret number For example, if s is 6234
User enters g as 7436, then computer says 1 digit is in place 2 digits are out of place 1 digit is not in secret number
User keeps trying until he finds the secret number
53
Random Number Summary
#include <stdlib.h>
srand(seed);rn = rand(); /* [0 RAND_MAX] (e.g., 32,767) */
int rand_int(int a,int b){ return rand()%(b-a+1) + a;}double rand_float(double a,double b){ return ((double)rand()/RAND_MAX)*(b-a)+a;}
54
4.5 Use of Floating-Point RNs: Instrumentation Reliability
Reliability: the portion of the time that the component works properly. For example, 0.8 means 80% of the time the component is OK
Given the reliability of each component, can you determine the reliability of the whole system?
Analytical vs. Simulation
55
Analytical vs. Simulation Suppose the reliability for each component in
previous slide is the same and given by r We can then analytically compute the overall
reliability for the systems in (a) and (b) as r3 and 3r-3r2+r3, respectively. (how)
OR, we can simulate the system using RNs Simulate each component by generating random numbers between 0 and 1. If this number is less than r, then we consider the given component works
properly. If all three in (a) or at least one in (b) works properly, then we consider the
whole system works properly. We repeat the above experiment (say) 1000 times and find that 600 times
the whole system worked properly. Then overall reliability is 600/1000=0.6. Can you write a simulation program for any configuration where reliability of
each component could be different
56
#include <stdio.h>#include <stdlib.h>#include <math.h>
double rand_float(double a,double b);
int main(void){ unsigned int seed; int n, k; double component_reliability, a_series, a_parallel, series_success=0, parallel_success=0, num1, num2, num3; /* Get information for the simulation. */ printf("Enter individual \ component reliability: "); scanf("%lf", &component_reliability); printf("Enter number of trials: \n"); scanf("%i", &n); printf("Enter unsigned integer seed: \n"); scanf("%u", &seed); srand(seed); printf("\n");
/* Compute Analytical reliabilities. */ a_series = pow(component_reliability,3); a_parallel = 3*component_reliability - 3*pow(component_reliability,2) + pow(component_reliability,3);
/* Determine simulation reliability estimates. */ for (k=1; k<=n; k++) {
num1 = rand_float(0,1); num2 = rand_float(0,1); num3 = rand_float(0,1);
if (((num1<=component_reliability) && (num2<=component_reliability)) && (num3 <=component_reliability)) series_success++;
if (((num1<=component_reliability) || (num2<=component_reliability)) || (num3 <=component_reliability)) parallel_success++; }
printf("Analytical Reliability \n"); printf("Series: %.3f Parallel: %.3f \n", a_series,a_parallel);
printf("Simulation Reliability \n"); printf(" Number of trials %i \n",n); printf("Series: %.3f Parallel: %.3f \n", (double)series_success/n, (double)parallel_success/n); return 0;}double rand_float(double a,double b){ return ((double)rand()/RAND_MAX)*(b-a) + a;}
57
Exercise What will be the “if condition” in
the simulation code of the following systemComp1, r1
Comp3, r3
Comp5, r5
Comp4, r4
Comp2, r2
Comp6, r6
if ( ( (num1<=r1 && num2<=r2) || (num4<=r4 && (num3<=r3||num5<=r5)) ) && (num6<=r6) ) success++;
58
SKIP REST
Study 4.6 and 4.7 from the textbook
59
4.8 Macros * #define macro_name(parameters) macro_text macro_text replaces macro_name in the
program
Examples #define area_tri(base,height) (0.5*(base)*(height)) #define PI 3.14
z=x * tri(3, 5) + y; z=x * (0.5*(3)*(5)) + y; k=2*PI*r; k=2*3.14*r;
60
4.9 Recursive Functions*
A function that invokes itself is a recursive function.
int fact(int k){ if (k == 0) return 1; else return k*fact(k-1);}
k!=k*(k-1)!
61
#include <stdio.h>
int fact(int k){ if (k == 0) return 1; else return k*fact(k-1);}
int main(){ int n; int nf;
printf("Enter n\n"); scanf("%d",&n);
nf = fact(n); printf("Factorial = %d\n", nf);
system("pause"); return(0);}
62
Fibonacci Numbers
Sequence {f0,f1,f2,…}. First two values (f0,f1) are 1, each succeeding number is
the sum of previous two numbers. 1 1 2 3 5 8 13 21 34 F(0)=1, F(1) = 1 F(i) = F(i-1)+F(i-2)
63
Fibonacci Numbers
int fibonacci(int k){ int term; term = 1; if (k>1) term = fibonacci(k-1)+fibonacci(k-2); return term;}
64
#include <stdio.h>
int fibonacci(int k){ int term = 1;
if (k>1) term = fibonacci(k-1)+fibonacci(k-2);
return(term);}
int main(){ int n; int nfib;
printf("Enter n\n"); scanf("%d",&n);
nfib = fibonacci(n); printf("Fibonacci = %d\n",nfib);
system("pause"); return(0);}
/* Iterative Version of Fibonacci Function */
int fibonacci(int k){ int a,b,c,i; if (k<=1) return 1; else { a = 1; b = 1; i = 2; while (i<=k)
{ c = a + b; a = b; b = c; i = i + 1;}
return(c); }}
65
Extra examples
66
Exercise Given radius and height of a cylinder. Write a
function to compute the surface area. A = 2*pi*r*(r*h)
#define PI 3.14
double area(double radius, double height)
{return 2*PI*radius*(radius+height);
}
67
Exercise Given radius and height of a cylinder. Write a
function to compute the volume. V = pi*r2*h
#define PI 3.14
double volume(double radius, double height)
{return(PI*radius*radius*height);
}
68
Exercise Write a function to compute the median
of 3 numbers x, y and z. Possible order of numbers
x<y<z -> median y x<z<y -> median z y<x<z -> median x y<z<x -> median z z<x<y -> median x z<y<x -> median y
69
Solution
int median(int x, int y, int z){
if (((x<y) && (y<z)) || ((z<y) && (y<x))) return y;
else if (((y<x) && (x<z)) || ((z<x) && (x<y))) return x;else return z;
}
70
Exercise Assume you have maximum and
minimum functions implemented. Use these to find median of 3 numbers
a < b < c -> median is b Consider 3 pairs (a,b),(b,c),(a,c)
min(a,b) = a min(b,c) = b Max(a,b,a) = b min(a,c) = a
71
Solution
int median(int x, int y, int z){
return(max(min(x,y),min(x,z),min(y,z)));}