Upload File

1 status of the clic two-beam module program a. samochkine, g. riddone acknowledgements to the...

  • Home
  • Documents
  • 1 Status of the CLIC two-beam module program A. Samochkine, G. Riddone Acknowledgements to the Module WG members 4 February 2014 CLIC Workshop 2014 (3-7
Download 1 Status of the CLIC two-beam module program A. Samochkine, G. Riddone Acknowledgements to the Module WG members 4 February 2014 CLIC Workshop 2014 (3-7

If you can't read please download the document

Upload: ezra-morton

Post on 03-Jan-2016

217 views

Category:

Documents


2 download

Report

ALIGNMENT TESTS Review of CLIC Two Beam Module lab program 06/11/2013 On behalf of CLIC pre-alignment team

K. Alam, CLIC workshop, October 16-18, 2007 1 CLIC workshop, 16-18 October 2007 Working group “ Two beam hardware and integration” Test module in the two

G. Riddone 03.06.2009

Update of master schedule and report from SLAC G. Riddone 2008.10.08

G. Riddone, 12/04/2011

7/12/09 CLIC Module WG: “CLIC Quadrupoles Prototype Status” Michele Modena – CERN TE/MSC

CLIC MODULE Procedure for the thermal and alignment testing of CLIC duty cycles

4 th CLIC Advisory Committee (CLIC-ACE), May 26-28, 2009 CLIC two-beam module integration issues

Updated Thermo-Mechanical Model of the CLIC Two-Beam Module Riku Raatikainen 18.7.2011

Influence of the Gravity, Vacuum and RF on CLIC Module T0 Behavior 21.11.2011 R. Raatikainen

1 04-December-2013 BE-RF-PM CLIC MODULE Procedure for the thermal and alignment testing of CLIC duty cycles Written by: Elena Daskalaki Checked by: Alexander

G. Riddone 13.05.2008

LCWS12, 25/10/2012 1 CLIC two-beam module development Status and future plans G. Riddone Outlook Short introduction CLIC Module Validation program Future

The CLIC Two-Beam Accelerator Module & Requirements

INTEGRATION OF RF STRUCTURES IN THE TWO-BEAM MODULE DESIGN G. Riddone, CERN, Geneva, Switzerland A. Samoshkin, D. Gudkov, JINR, Dubna, Russia Abstract

CLIC Module WG 20/07/2009 H. MAINAUD DURAND, BE-ABP/SU Pre-alignment system and impact on module design

Movimento 5 Stelle Lombardia · 01-dic 02-dic 03-dic 04-clic 05. clic 06-clic 07-clic oaclic 09-clic 10-clic Il-clic 12-dic 13-dic 14-clic L5-dic 16-clic 17-.dic 18-clic 19-dic 20-clic

CLIC MODULE TRANSPORT AND INSTALLATION Keith Kershaw CES, 8 October 2008

Status of CLIC X-band high-power components · SLAC workshop 7-10 July 2009 WP1: microwave based accelerators Status of CLIC X-band high-power components G. Riddone, 08.07.2009 (contribution

G. Riddone, 08.07.2009

Vacuum tests for CLIC module prototypes

CLIC beam physics meeting Test module program

SLAC workshop 7-10 July 2009 WP1: microwave based accelerators Status of CLIC X-band high-power components G. Riddone, 08.07.2009 (contribution from A

CLIC NI Acquisition and Control Module update

18.07.2013 Module DataLift MagicCSV. 2 18.07.2013 Gabriel KEPEKLIAN Problématique du module DataLift en un clic ! Le défi : peut-on déclencher en un seul

Review of the CLIC Two-Beam Module lab program Conclusions

CLIC Module Instrumentation

CLIC Two-beam Module P rogram

CLIC Module meeting, 22/08/2011 N. Chritin (EN/MME) Cradles design for CLIC module supporting system (EDMS 1158277) General principle Main inputs an

CLIC MODULE INTEGRATION ISSUES

2012.03.21, CLIC Test Module Meeting Status of the DB Quad adjustable support design Mateusz Sosin CLIC Module WG Meeting, 22-May-2013

1 21-09-2012 «BE-RF-PM» CLIC prototype two-beam modules Thermal test planning G. Riddone, F. Rossi Introduction Thermal tests 1.Environment 2.Heating and

CLIC Module Working Group

Thermal-Structural Finite Element Analysis of CLIC module T0#2 · 2018-11-20 · Summary and outlook Thermal-structural analysis of CLIC lab module T0#2 is done with Finite Element

CLIC MODULE Progress of thermal tests for CLIC duty cycles