10 firelec migration solution this document and the information therein are the property of firelec...
DESCRIPTION
/10 Existing 19 inches rack, IOBs, power supplies and communication cards to be removed Existing architecture This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 3 Process I/Os Existing ITBs (DI,DO) Existing ITBs (AI,AO) CNRTL & I/O Rack 19 inches Height : 10U Existing cable tray 19 inches, Height : 1U ITBs and I/O cables stay in place in the existing cabinets Process I/Os stay in place in the existing cable trays FMS-DCI6-DV-1TRANSCRIPT
/10
FIRELEC Migration Solution
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 1
Don't let wiring costs prevent you from upgrading an ABB
« Fischer and Porter System 6 »to a DeltaVTM system
/10
The ITB Migration Adapters (ADP-ITB) allow to connect easily, existing Fischer and Porter System 6 FTAs to DeltaV I/O cards keeping in place : • the existing I/O panels (ITBs)• the existing associated I/O cables• the existing loop power supplies connected on the FTAs
Fischer and Porter System 6 > DeltaVUsing ADP-ITB (Migration Adapters)
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 2
New DeltaV System ITBand cable to be kept
I/O Board (IOB)to be
removed
No impact on the field wiring
No need for loop check
FMS-DCI6-DV-1
/10
Existing 19 inches rack, IOBs, power supplies and communication cards to be removed
Existing architecture
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 3
Process I/Os
Existing ITBs (DI,DO)
Existing ITBs (AI,AO)
CNRTL & I/O Rack 19 inches
Height : 10U
Existing cable tray 19 inches, Height : 1U
ITBs and I/O cables stay in place in the existing
cabinetsProcess I/Os stay in place in
the existing cable trays
FMS-DCI6-DV-1
/10
ITBs and I/O cables stay in place in the existing
cabinetsProcess I/Os stay in place in
the existing cable trays
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 4
New architecture forA.loop or P.loop replacement
BC11007 with ADPs Rack 19 inches
Height : 3U
Process I/Os
Existing ITBs (DI,DO)
Existing ITBs (AI,AO)
Existing cable tray 19 inches, Height : 1U
FMS-DCI6-DV-1
/10
New architecture forD.loop or D.Output replacement
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 5
2 x BC11007 with ADPs Rack 19 inches
Height : 2 x 3U = 6U
ITBs and I/O cables stay in place in the existing
cabinetsProcess I/Os stay in place in
the existing cable trays
Process I/Os
Existing ITBs (DI,DO)
Existing cable tray19 inches, Height : 1ULower
connector
Upperconnector
FMS-DCI6-DV-1
/10
New architecture forA.Input or A.Output replacement
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 6
Existing cable tray19 inches, Height : 1U
2 x BC11007 with ADPs Rack 19 inches
Height : 2 x 3U = 6U
ITBs and I/O cables stay in place in the existing
cabinetsProcess I/Os stay in place in
the existing cable trays
Process I/Os
Existing ITBs (AI,AO)
Lowerconnector
Upperconnector
FMS-DCI6-DV-1
/10
New DeltaV architecture
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 7
The new DeltaV controllers and I/O cards (M or S series) are
installed
The I/O files BC11007 are installed in place of the existing Fischer and Porter System 6 Files where the
IOBs were previously installed
The ADP-ITBs are installed in the new files
BC11007
Secondary DeltaV Area Control Network
Cnt
rlP
S
I/O1
I/O2
I/O3
I/O4
I/O5
I/O6
I/O7
I/O8
Primary DeltaV Area Control Network
Cnt
rlP
S
I/O9
I/10
I/11
I/12
I/13
I/14
I/15
I/16
Existing ITBs (DI,DO)
Existing ITBs (AI,AO)
AI AO DI DOThe new FIRELEC I/O cables are
installed between ADP-ITBs and new DeltaV I/O cards (M or S series)
FMS-DCI6-DV-1
/10This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 8
Compatibility tableIOB (Input/Output Board) :The board which is to be removed
FTA (Field Termination Assembly) :The I/O panel where the I/Os are connected, and which is kept
Firelec Adapter :The migration adapter to be installed in BC11007 (new I/O file) to perform I/O migration and process signal spliting toward the DeltaV system I/O cards.
FMS-DCI6-DV-1
/10
Advantages
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 9
The main advantages of the FMS-DCI6-DV-1 (ADP-ITBs)for Fischer and Porter System 6 migration are as follow :
• Existing I/O cables are just disconnected from the Fischer and Porter System 6 I/O boards and reconnected
to the ADP-ITBs keeping in place the FTAsand associated I/O cables
• The existing loop drawings are kept without any modification, allowing all maintenance processes and procedures
to remain unchanged.
FMS-DCI6-DV-1
/10
Contacts
This document and the information therein are the property of FIRELEC and shall not be copied or communicated to a third party without the prior written authorization of FIRELEC 10
For more information and support :
Roel C.Mulder
Director System Migration &Modernization Europe
E-mail : [email protected] : +31(0)70 413 67 18
Wilfrid DUPAS
Sales Director
E-mail : [email protected] : +33 (0)470 590 550
FMS-DCI6-DV-1