Anerobic Digester based Methane Extracting System components

DESCRIPTION FOR 4 SETS OF 100M3 BIOGAS PLANT

STEEL MOULD NECK HS: 84804900

GLASS FIBRE PLASTIC GAS-HOLDER 1.2M3 HS:39269090.90

GAS PUMP(0.5KW, 30-50M3/H)

DESULFURIZER & DEHYDRATION (PX-200L) HS: 84213990.00

STEEL MOULD 100M3 HS: 84804900

GAS STORAGE BAG 20M3 HS: 39232900.00

WATER PUMP 3KW HS:84138100.90

BIOGAS GENERATOT 30KW HS:84138100.90

Solid-liquid equiment (M-180) HS:84138100.90

BIOGAS FITTING HS: 39174000

SEWAGE PUMP 5.5KW HS:84138100.90

BIOGAS LAMP WITH FIRE MAKER HS: 94055000

BIOGAS STOVE WITH DOUBLE BURNER HS: 73211100

Functions

This product is composed of 26 steelmoulding boards and 6 work pieces.The product is applied to construct theconcrete digester neck of the Puxin 75or 100 cubic meter biogas plant,Digester inner Φ166cm, Outer Φ196cm,height: 130cm

This product is composed of 316 steelmoulding boards and 1set of supportshelf. The product is applied toconstruct the concrete digester of thePuxin 50, 75 or 100 cubic meter biogasplant, Digester inner Φ600cm, OuterΦ640cm, height: 380cm.

This product is one of the maincomponents of the Puxin 100M3 BiogasPlant, and is composed of a containermade with glass fibre reinforcedplastic and three steel supports. On thetop of the gas –holder there is a valvethat can eliminate the atmosphericpressure.Φ164cm,High 70cm.

Materials：Red Mud reinforced plasticsThickness 1.0mm.

380V, 0.5KW, 30M3/H10KPA

For medium size digester desulfurization, Meetthe flow rate ≤350m3/day. The replace time is dueto the flux of biogas and the content of H2S,40000m3 biogas can be treat before replacement,The replace weight is 200kgs, Can be usingoutdoor, Made by steel.54000 PX-

Flow: 40M3/h, head: 13meters, Power:3KW,

Simple operation, Easy maintenance, Large processing capacity, Low energy consumption, Suitable for continuous operation, No coagulant is needed

The light is similar to a 60-100w incandescent lamp Gas consumption: 0.07m3/h

30m Φ9mm PVC soft pipe, 1pc pressure gauge 16KPa, 1pc desulpharize 1KG ,5pcs valve，etc,

Suitable gas: Biogas Heat load: 2.8KW Gas consumption rate: 0.45m3/h (for one burner) Heat efficiency : >57% Gas entrance pressure: 1600Pa Fire maker efficiency : >98%