10x8 u s t o m e r s atis rate factio c n shed … › free › free-10x8-gable-shed...free 10x8...

10X8GABLE SHED PLANFREE STREAMLINED VERSION

Supported & Recommended by our Friends & Partners:

2018

RATE

CU

STOMER SATISFACTION

CU

STOMER SATISFACTION

98,6%

Copyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy.

COMPARISON BETWEEN OUR FREE & PREMIUM PLANS

FREE 10X8 SHED PLAN:

• Basic schematics

• Basic angles

• Basic measurements

• Simplified instructions

• No material list

PREMIUM 10X8 SHED PLAN:

• Instant email delivery (PDF) download

• Views from all angles

• Measurements for every part

• Full layouts for every step

• Step-by-step assembly instructions

• Full material / shopping list

• Full cutting list

• PRO-TIPS for every section

• Mobile / Tablet / PC / MAC ready

• Beginner friendly

VS.

NEED MORE INFORMATION ON THIS PREMIUM 10X8 SHED PLAN?

AVAILABLE ONLY AT THE OFFICIAL 3DSHEDPLANS™ WEBSITE


http://www.3dshedplans.com/10x8-gable-shed-plan/

DISCLAIMER

3DSHEDPLANS™ is here to help and assist the DIYer. All information / advice is for general guidance only and whilst every effort is made to ensure that it is correct, it should not be relied upon as accurate. The information / advice contained within this document is intended for persons of no less than 18 years of age. Use of the information / advice contained within this document is at your own risk. It is the sole responsibility of any person(s) using the information / advice contained within this document that their level of competence is appropriate for the task they want to complete. All users of information / advice contained within this document should have all work checked / tested by a professional qualified trades person where applicable. You should be aware of current regulations on buildings, gas, water and electrical works (i.e. Part P) if you have any doubts we would advise you to research further information or contact the appropriate professional body.

LIABILITY3DSHEDPLANS™ and Netholics Media, LLC with the document through ownership and contribution will not accept any liability for any loss, damage, injury or negligence direct or indirect from use of the information / advice contained within this document. Any dispute arising from use of this document or disclaimer will be decided by the US courts under the relevant US law.

COPYRIGHT3DSHEDPLANS™ is official & registered trademark in the US. All of the contents (text/slogan) and artwork (graphics/logo) within this document are the copyrighted and trademarked property of 3DSHEDPLANS™ & Netholics Media, LLC. No part of the text or artwork may be reproduced by any means or in any form whatsoever without written permission, except for brief quotations embodied in literary articles or reviews. And no part of this document may be reproduced without written permission of the owners.This Information may be stored on computer for personal use only by the client (who purchased the plans from our official store), not for presentation or publication.


BASIC OVERVIEW AND DIMENSIONS

This 10x8 gable shed is an exquisite and spacious mini shed with an overall body width of 8 feet and 1 inches

from the front and 10 feet and 2 ¼ inches from the side. The overall height of the shed is 11 feet and 8 ½

inches including the roof. The shed is equipped with a tall and broad front door with a height of 6 feet and 7 ½

inches and a width of 4 feet 6 inches. There is a small window of 3 feet x 3 feet. The overall roof width is 11

feet and 6 ¾ inches. Note that the windows and doors need to be purchased separately or you can use your

old doors and windows to adjust to this frame. If you are buying new windows and doors, follow the

manufacturer’s instructions for accurately adjusting them.

1

6' 4 1/2"

11' 8 1/2"

Copyr

3' 3"

8' 1"

FRONT VIEW DOOR

11' 6 1/2"

NOTE

Professional tip section is only available in PREMIUM (full) version of the plan.

10' 1"

3'

SIDE VIEW WINDOW

3'

ight © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy.

FOUNDATION AND FLOOR

The first step of creating your shed is to build a solid foundation and floor. The foundation will be supporting the entire

structure of your shed so it is a must to make sure it is strong enough. The foundation base should be 10 feet in length

and 8 feet in width as shown in the figure. Use 4x4 pressure treated skids for the foundation. As for the floor, use ¾”

tongue and groove plywood as shown in the figure. Use truss and skids carefully and make sure they are fitted and

spaced accurately.

2

NOTE


3/4" Tongue and Groove Plywood

FLOOR

8'

FOUNDATION BASE

10'

4x4 PRESSURE TREATED

SKID


WALL STRUCTURES

Once you have set up the floor and the foundation, the next task is to work on the walls. The front and the back

wall will be 7 feet and 10 ¾ inches in width and 7 feet and 6 inches in height. For the front wall, cut the space for

the door as shown in the figure. Use L joints, cripple studs, plates, headers and wall studs to assemble the parts.

Once the frames are constructed, use T1-11 siding with galvanized nails and exterior screws to finish the frames.

3

NOTE


7' 6"

FRONT WALL

8'

7' 6"

8'

7' 4" BACK WALL


WALL STRUCTURES

The right and left walls should be 9 feet and 5 inches in width from the top and 10 feet in width at the

bottom. The difference in size is because the top area will accommodate the roof. The width of both the

walls should be 7 feet and 6 inches in height. Use L joints, cripple studs, plates, headers and wall studs to

assemble the parts. Once the frames are constructed, use T1-11 siding with galvanized nails and exterior

screws to finish the frames.

4

NOTE


10' RIGHT WALL

7' 6"

9' 4"

10'LEFT WALL

7' 6"

9' 4"


ROOF SECTION

Once all the wall structures are completed, it is time to get to the roof. The roof is the most complex part of

the shed. There is a lot of heavy lifting required. Therefore, it is recommended to have additional help.

Start with building roof rafters of 60 inches in dimension.Use ½ plywood for roof sheathing and asphalt

shingles for finishing the roof. Your roof needs to strong and the parts should be fit accurately to avoid any

leakages. Install T1-11 on the two outer most trusses using galvanized nails. Follow manufacturer’s

guidelines to install the shingles.

5

NOTE


Roof Rafters

Roof Overhang

5'

10' 7"

0.5" Plywood(Roof Sheathing) Asphalt

Shingles


PREMIUM PLAN INCLUDES:

• Instant email delivery (PDF) download

• 30+ detailed 3D schematics

• Views from all angles

• Measurements for every part

• Full layouts for every step

• Step-by-step assembly instructions

• Full material / shopping list

• Full cutting list

• PRO-TIPS for every section

• Mobile / Tablet / PC / MAC friendly

• Beginner friendly

Supported & Recommended by our Friends & Partners:

2018

Wait no more! Save time & money now...Get your own professional 10X8 gable shed

plan and start building your dream shed today!Click here and go PREMIUM!

RATE

CU

STOMER SATISFACTION

CU

STOMER SATISFACTION

98,6%

AVAILABLE ONLY AT THE OFFICIAL 3DSHEDPLANS™ WEBSITECopyright © 2018 All Rights Reserved. Use of this PDF file constitutes acceptance of the 3DSHEDPLANS.COM User Terms and Privacy Policy.

http://www.3dshedplans.com/10x8-gable-shed-plan/

10x8 u s t o m e r s atis rate factio c n shed … › free › free-10x8-gable-shed...free 10x8...

Documents