13w led downlight - ip54...smd led down light adopts high lumen smd led, pc diffuser with even light...
TRANSCRIPT
13W LED Downlight - IP54
Postal: PO Box 105, Upper Coomera, QLD 4209 Phone: 07 5538 3611Email: [email protected]: www.ledlightingaustralia.net.au
Introduction
Slide switch for color selection
SMD LED Down light adopts high lumen SMD LED, PC diffuser with even light output. Plastic coated aluminum housing with internal driver design; it is our most economical and practical downlight version. Dimmable driver shares great popularity by the excellent dimming effect.
● Up to 70% energy saving compared tostandard CFL
● Long lifetime of 40,000 hours● Dimmable when using triac dimmer● 90° wide beam angle●120-130mm cutout● CCT: 3000K 4000K 5700K● No UV/IR light● Environment friendly, without Mercury or any
other hazardous substances
Application notes● IP54 only for the LED cover, IP40 for other part● Professional electrician for installation only● Switch off before installation● Do not touch when in use● Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
SAA
Technical Specifications
Model Voltage Power PowerFactor
Lumen(±5%) CCT Beam
angle Lifespan CRI Dimmable Dimension
UP-DL41B-4-13W-P3 AC230V 13W 0.9
1050 3000K
90o 40000h ≥80 Yes Ø145*62.5mmcutout 120-130mm1320 4000K
1210 5700K
Product Information
Driver data SheetDriver data DIM
Input rated Voltage AC230V
Frequency 50Hz
Input Voltage AC200-240V
Efficiency ≥85%
Total load Wattage 13W±1W
Power Factor 0.9
Rated input current ≤0.07A
Full load output Voltage 65-78V
Rated output current 140mA
Output current range 140mA±5%
Power tolerance ±5%
Current output tolerance ±5%
Dimming range 8%-100%
Dimmer Triac dimmers
Short circuit protection PASS
Over voltage protection PASS
Over temperature protection PASS
Withstand voltage —
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
13W Ⅱ IP40 / IP54 -20oC~45oC 0~90% -20oC~65oC
62.5
Ø145
Ø11
0
Photometric Diagram
Spectral Distribution
3000K
380 500 600 700 800Wavelength(nm)
Max=7911 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
4000K
5700K
380 500 600 700 800
380 500 600 700 800
Wavelength(nm)
Wavelength(nm)
Max=8385 [1.0=20000]
Max=10574 [1.0=20000]Sp
ectr
um
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.57 SDCM F3000K
x=0.4411 y=0.4035
3.91 SDCM F4000K
x=0.3818 y=0.3740
5.65 SDCM F5700K
x=0.3356 y=0.3514
3000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 104.5 DEG
-/+180
-120
-90
-30
120
90
30
0
80
160
240
320
400
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)4.0
3.6
3.2
2.8
2.4
2.0
1.6
1.2
0.8
0.4
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 104.28deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 699.5 lm
4000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 104.7 DEG
-/+180
-120
-90
-30
120
90
30
0
100
200
300
400
500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 104.61deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 866.9 lm
5700K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 104.7 DEG
-/+180
-120
-90
-30
120
90
30
0
100
200
300
400
500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 104.08deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 814.5 lm
100
90
80
70
60
50
40
30
20
10
0
11:1
3:13
11:2
5:10
11:3
7:10
11:4
9:10
12:0
1:10
12:1
3:10
12:2
5:10
12:3
7:10
12:4
9:10
13:0
1:10
13:1
3:10
13:2
5:10
13:3
7:10
13:4
9:10
14:0
1:10
14:1
3:10
14:2
5:10
14:3
7:10
14:4
9:10
15:0
1:10
15:1
3:10
15:2
5:10
15:3
7:10
15:4
9:10
16:0
1:10
16:1
3:10
16:2
5:10
16:3
7:10
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 104.7DEG
UNIT: cd
C0/180, 104.6 deg
C30/210, 104.7 deg
C60/240, 104.7 deg
C90/270, 104.7 deg
100
200
300
400
500
0O
180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
Installation
1 2
3 4
Ceiling Opening
A. Hold back spring clips
B. Push downlight into position
Ceiling
Spring Clips
Loosen the screw and take off the cover, connect the wire to the wring terminals, put the cover back and tighten the screw.
Install requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 25mm
Building element above fitting
BuildingstructuralmembranceBuilding material or
thermal insulation