PHILLIPS 66 COMPANY PHILTEX/RYTON COMPLEX PIPING SPECIFICATION

PHILTEX/RYTON COMPLEX PIPING SPECIFICATIONSPECIFICATION NUMBER: 15CSTL-NA

SERVICE: ASME CLASS 150 NACEDATE: 6/9/04

MINIMUM C/A: 1/16"MIN NDE: 100%MAXIMUM HARDNESS: 235 BhnSTRESS RELIEF: ALL WELDS (36)HYDROSTATIC TESTING: YES

PRESSURE/TEMPERATURE LIMITATIONS: ASME CLASS 150MEETS CODE(S): ASME B31.3 / NACE MR-01-75

COLOR: PHILTEX/RYTON SPEC

SIZE & 11 23468101214161820-24

FLANGES

(35) (42)ASME FORMDROPDOWN (1)SW - A105 RF PRF'D

WN - SCH 80 ASME 300

SE - DO NOT USE A105 RF

WN

SCH 80

ASME 300

A105 RF

WN

SCH 40

ASME 300

A105 RF

WN

SCH 40

A105 RF

WN

STD

A105 RF

WN PRF'D / STD

FITTINGS

ELL, TEE,

RED, CAP (1)

SW- A105 3000# PRF'D

SE - A105 3000# DO NOT USE EXCEPT FOR VENTS, DRAINS, AND EXISTING EQUIPMENT

BW- A234 WPB SCH 80

A234

WPB

SCH 80

A234

WPB

SCH 40

A234

WPB

STD

CPLGS-

INLINE

(1)SW-A105 3000# PRF'D

SE-DO NOT USE EXCEPT FOR EXISTING EQUIPMENT

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

BRANCH CONNECTUSE THE TABLE IN SECTION 3.6 OF THE APPLICATION GUIDELINES

PIPE SEAMLESS UNLESS OTHERWISE SPECIFIED BY PHILLIPS DESIGN ENGINEERING--COAT AND WRAP BURIED PIPE

SIZE & 11 23468101214161820-24

NIPPLE

(17)A106 B SCH 80 SMLS (5)

SE DO NOT USE EXCEPT TO MATCH, VENTS, DRAINS, AND EXISTING PIPE CONNECTION.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

SE

(5)A106 B SCH 80 SMLS

SE DO NOT USE EXCEPT TO MATCH, VENTS, DRAINS, AND EXISTING PIPE CONNECTION.

FORMTEXT XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

BW / SW

A106 B

SCH 80

SMLSA106 B

SCH 40

SMLS

A106 B STD SMLS / A 53 B STD EFW

WELDOLET & BW ELBOLET ( 2 IN

(5)A105 SCH 80BOLTING MATERIAL(1) A193 B7M WITH GREEN XYLON 1014 OR 1424 COATING PRF'D

(2) A193 B8M CLASS II STUD BOLTS

(3) NEVER MIX B8M & B7M.

WELDOLET & BW ELBOLET 3 IN 6 INA105 SCH 40NUTSA194 2H HEAVY HEX NUTS / A194 2H HEAVY HEX NUTS WITH GREEN XYLON 1014 OR 1424 COATING: USE COATED NUTS ONLY WITH COATED BOLTS

SOCKOLET & SW ELBOLETA105 3000#

GASKETS(1)CORRUGATED 316SS W/GRAPHITE PRFD. IDT WD-20, J M CLIPPER ELASTOGRAPH, GARLOCK GRAPHONIC ALL ACCEPTABLE.

(2)IN AREAS WHERE GRAPHONICS GASKETS WILL NOT ACCOMMODATE FLANGE CAP USE SPIRAL WOUND 316 SS WITH GRAPHITE FILL

(3)USE GRAPHONICS WITH NICKEL 200 AT RYTON

PLUGS, SOLID, ROUND HEADA105 (6) (15)TUBING (1/2 & SMALLER) 316 STAINLESS STEEL ( .035 WALL )

BUSHINGSA105 (16)SWAGELOK TUBING FITTINGS 316 STAINLESS STEEL

UNIONSFLANGES PRF'D / A105 3000#THREAD COMPOUNDGLADIATOR PASTE PRF'D / RECTORSEAL / VIRGIN TEFLON

SWAGE NIPPLE FOR ( 2 IN PIPEA234 WPBN SCH 160THERMOWELL CONNECTIONSOCKOLET / SW ELBOLET PRF'D or FLANGED PFRD

316 THERMOWELL PRF'D

Philtex/Ryton Mechanical Design Engineering must approve any exceptions to these specifications for any job on a case-by-case basis.15CSTL-NA

REV: 2

PHILTEX/RYTON COMPLEX PIPING SPECIFICATIONSPECIFICATION NUMBER: 15CSTL-NASERVICE: ASME CLASS 150 NACEDATE: 6/9/04

Valves listed below are preferred Consult the Phillips Design Engineering Standards for the other acceptable alternatives.

Orbit valves are considered a specialty item consult engineering.

SIZE -1 23468 1214 - 24

GATE

NACE

OS&Y

BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

BONNET CONSTRUCT

END CONNECTION

NOTESA105 (800#)

316 SS HF PRF'D

GRAPHITE (23)

WELDED / BOLTED -B7M

W/ 2HM NUTS

FE PRF'D / ASME 300

API 602 (6)

A105

31S SS HF PRF'D

GRAPHITE (23)

BOLTED - B7M W/ 2HM NUTS

ASME 300 FE

API 600

A105

13% CHROME SS HF

GRAPHITE (23)

BOLTED - B7M W/ 2HM NUTS

FE

API 600

CHECK

NACE

(14) (25)BODY MATERIAL

TRIM MATERIAL

SPRING MATERIAL

END CONNECTION

NOTESA105

13% CHROME SS HF

FE PRF'D / ASME 300

A216 WCB

410 SS

N/A / INCONEL X-750

ASME 300 FE

SWING / WAFER

A216 WCB

410 SS

INCONEL X-750

FE

WAFER

BUTTERFLY

FIRESAFE

API 607

API 608

(25)BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

END CONNECTION

NOTESUSE BALL VALVE

USE BALL OR GATE VALVEUSE BALL OR GATE VALVE

BALL

FIRESAFE

API 607

API 608

NACE

BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

SEAT MATERIAL

END CONNECTION

NOTESA105

316 SS

TEFLON

GLASS FILL TEFLON

FE-ASME 300 MAX. TEMP 400

MODEL: JAMESBURY

FE 5300N-31-2236XT PRFD

SE 9FBN-2236XTA216 WCB

316 SS

TEFLON

GLASS FILL TEFLON

ASME 300 FE

MAX. TEMP 400

MODEL: JAMESBURY 5300N-31-2236XT

A216 WCB

316 SS

TEFLON

GLASS FILL TEFLON

FE

MAX. TEMP 400

MODEL: JAMESBURY 5150N-31-2236XT

PLUG

FIRESAFE

API 607

NACE

BODY MATERIAL

PLUG MATERIAL

SLEEVE MATERIAL

END CONNECTION

NOTESA105

316 SS

TEFLON

SE / FE-ASME 300 PRF'D

MAX. TEMP 400A215 WCB

316 SS

TEFLON

ASME 300 FE

MAX. TEMP 400

A216 WCB

316 SS

TEFLON

FE

MAX. TEMP 400

GLOBE

NACE

BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

BONNET CONSTRUCT

END CONNECTION

NOTESA105 (800#)

13% CHROME SS HF

GRAPHITE (23)

BOLTED - B7M W/2HM NUTS

SW / FE PRF'D / ASME 300

A216 WCB

13% CHROME SS HF

GRAPHITE (23)

BOLTED -B7M W/2HM BUTS

ASME 300 FE

A216 WCB

13% CHROME SS HF

GRAPHITE (23)

BOLTED-B7M W/2HM BUTS

FE

NOTES

(1) Use socket weld fittings except in areas where welding is not permitted.

(5) All first take-off piping threaded nipples 1/2" to 1 1/2" to first block valve(s) shall be schedule 160 and stamped "160".

(6) Atmosphere vent and drain valves must be 1", have SE construction on the atmospheric end and must have a solid round plug threaded into it (1/2" on level gage bridles).

(14) Use only spring loaded check valves in vertical lines. Do not install any check valve with normal flow direction being down.

(15) No hexagonal head or hollowed out plugs allowed.

(16) Bushings to be minimum of two size reductions.

(17) No all thread nipples allowed.

(23) Valves shall have die formed graphoil, rings with braided graphite wiper ring top and bottom, with corrosion inhibitor.

(25) Equipment installed between flanges, i.e., wafer butterfly and check valves and some control valves, require fire insulation or shielding of the flange bolts.

(35) For slip-on flanges, leave a 1/4" gap on the back weld or drill an 1/8" hole from the backside to the bore for hydrogen gas to escape.

(36) Butt welds, Weldolets, Threadolets, and Slip on flanges will be stressed relieved. Sock weld piping is not required to be stress relieved.

(42) Slip-on flanges are to be used only on existing sulfur contaminated piping.